CME and UCCX, G.729 for local/remote agents?

Hi Everybody,
Here is the environment
Local site
- CME 8.5 (single node)
- UCCX 8.5 (single node)
- the SIP route point is configured for codec g711ulaw
- Desk IP Phone and CAD
Remote site
- Metro-E connection with local site
- Desk IP Phone and CAD
In UCCX administration GUI, System > System parameters > Media Parameters > Codec
It only allows me to choose G711...
is it possible to enable the G.729 for the local and remote agent?
Thanks in advance
Sam

I have added the following in CME to add a transcoder, and restarted the CCX engine.
But the UCCX system parameter > media codec still not allows me to choose G.729.
Did I make something wrong in CME settings?
sccp local GigabitEthernet0/1
sccp ccm 192.168.5.5 identifier 1 priority 1 version 7.0+
sccp
sccp ccm group 1
associate ccm 1 priority 1
associate profile 2 register XCODER
keepalive retries 5
dspfarm profile 2 transcode
codec g729br8
codec g729r8
codec g729ar8
codec g729abr8
codec g711ulaw
codec g711alaw
maximum sessions 2
associate application SCCP
telephony-service
sdspfarm units 5
sdspfarm transcode sessions 15
sdspfarm tag 1 XCODER
Thanks
Sam

Similar Messages

Start and stop windows service for multiple remote computers

Hello,
Can someone show me how to Start and Stop windows service for multiple remote computers using Command Prompt or PowerShell or even Java?
Thank you

You asked a pure Windows related question at a pure Java related forum. We have advised you to look for a Windows related forum to post the question. Nothing special. It's like asking a car mechanican to help you with your migraine, he would advise you to look for a general practitioner.
But why are you so surprised and negative about this answer after all? Don't we have to help you? Don't you appreciate help? So be it then, but please stay away then if you keep this attitude.

Plain user and systemd: dependency failed for local file system

I tried to switch to systemd, but ended up in a maintenance console (Enter root password or Ctrl-D to continue):
Enter password.
journalctl -b as suggested yields "Dependency failed for local file system".
I couldn't find a systemd troubleshooting page in the Wiki. So, can someone point me to such a page? Anyone willing to give some hints?
What I did so far: Did what https://wiki.archlinux.org/index.php/Systemd tells one should do to switch to systemd.
In the boot menu pressed e, moved one down to the line starting with "kernel", pressed e again, and appended init=/bin/systemd.
Somewhere I read that "mkinitcpio -p linux" should be issued to make systemd work. No (positive) effects.
Paul
P.S.: Shouldn't there be a topic "systemd" in "Pacman Upgrades, Packaging & AUR"?

skunktrader wrote:
poseidon wrote:In the boot menu pressed e, moved one down to the line starting with "kernel", pressed e again, and appended init=/bin/systemd.
According to the wiki you are supposed to append init=/usr/lib/systemd/systemd if you are using the "Mixed systemd/sysvinit/initscripts installation" mode. In all other configurations you should NOT have an init=.... entry since init becomes a symlink to systemd
As far as I know, the init= entry doesn't hurt anything - it just isn't necessary.
EDIT: Of course, it will hurt if the path was wrong...
Also, at least on my system, /bin/systemd symlinks to /usr/lib/systemd/systemd.
Last edited by cfr (2012-11-19 23:53:55)

Dreamweaver and Contribute set-up for local, testing, and VSS (CS4)

I'm trying to figure out the best configuration for my site.
I want to work locally on files, test them on a dev server while
still using VSS for versioning. With all this the site needs to
have Contribute enabled.
My thoughts are:
1. Define the local as my machine.
2. Define the testing as the dev server.
3. Define the remote as VSS.
I'm a little confused with the Put/Get and Checkin/Checkout
functionality as well. Any suggestions?
Thanks,
Victor

Site Name: PHP Test Site
Local Site Folder: C:\xampp\htdocs\php_test\
Server Name: Local Testing
Connect Using: Local/Network
Server Folder: C:\xampp\htdocs\php_test
Default Images Folder: C:\xampp\htdocs\php_test\Images\
Web URL: http://localhost/php_test/Server Model: PHP MySQL
Is that everything you need to know? Note that I do not have a remote testing site set up yet.

Disable discovery for non remotable agents (SQL instance)

Hello,
I do have SQL clusters monitored by SCOM. "Operations Manager" on each cluster node is filled with plenty of Warning like ones below:
Rule/Monitor "Microsoft.AD.ClientPerspective.Discovery" running for remote instance "<SQL INSTANCE>" with id:"<ID>" will be disabled as it is not remotable. Management group "XXX".
Rule/Monitor "Microsoft.SystemCenter.Apm.ApmAgent.Discovery" running for remote instance "<SQL INSTANCE>" with id:"<ID>" will be disabled as it is not remotable. Management group "XXX".
Rule/Monitor "Microsoft.SystemCenter.Apm.CsmAgent.Discovery" running for remote instance "<SQL INSTANCE>" with id:"<ID>" will be disabled as it is not remotable. Management group "XXX".
How can I disable above discovery to run on any SQL instance ?
Regards.

Hi,
Please try to make all the workflows you want to execute against a VS be tagged as remotable=”true”, more details:
http://nocentdocent.wordpress.com/2009/11/07/failover-cluster-monitoring-quick-insight/
Hope this helps.
Regards,
Yan Li
Regards, Yan Li

Use airport for internet and ethernet for local?

Hi. Ive searched around and cant find an answer for this.
I have a 27" imac connected to my router and all works fine for accessing the internet.
I have several other devices close by that I want to connect via ethernet. If i connect the imac to another router via ethernet I can browse my local devices but loose internet connectivity. It is as if the imac will suspend the airport connection while the ethernet cable is connected. I don't want my second router to act as a bridge as it doesn't support N speeds.
Essentially, I want the imac to use airport for internet and the ethernet port for local files.... The only workaround I have is to unplug the ethernet cable from the back of the imac when i want to use the internet. I'm hoping it's just a DNS issue, but cant seem to resolve it.
I do not need internet connectivity for the other devices and don't see how i can do that without enabling the wireless side of my second router and then creating a bridge...
Any suggestions?

It is as if the imac will suspend the airport connection while the ethernet cable is connected.
The Connection Order on your iMac is set so that if both AirPort and Ethernet are "on", the iMac will give priority to the Ethernet connection.
If you want to configure your iMac so that it gives priority to an AirPort connection if both AirPort and Ethernet are "on", give this a try:
Open System Preferences (gear icon on the dock) and open Network
Click on the small gear icon at the bottom of the connection list on the left
Click on Set Service Order and drag AirPort to the top of the connection order list
Click OK, then click Apply
Now, if both AirPort and Ethernet are active, your iMac will give priority to the AirPort connection. If you want to connect using Ethernet, you will have to turn AirPort off by clicking the fan shaped AirPort icon at the top of your computer screen.

How to know whether bypass proxy for local address is enabled in browser

Can anyone help me in finding out whether the check box "bypass proxy server for local address" in Internet explorer (Tools->Internet options->Connections->LAN Settings) is enabled from java plug in.
In my applet application if that checkbox is enabled then i have to throw a message saying that the checkbox is enabled.
Thanks in Advance
Regards
Vijay

We have been in discussions with Microsoft over the last few days on this issue - which is seen with Outlook 2007 versions onwards. Extract from resolution communication from Microsoft:
The issue you have raised is known as it has been reported and when you have a proxy set in Internet Explorer and “Bypass proxy settings for local addresses”, Outlook will attempt to connect to Office 365 directly – like the bypass rule would apply.
Because the direct connection is blocked in the Firewall, Outlook needs to have the connections going in Timeout before attempting to connect using the Proxy.
Your network trace proves the issue.
Microsoft have scheduled a fix for Outlook 2010 in February 2014 cumulative update. A fix for Outlook 2013 will also follow, but Outlook 2007 will not be addressed because it is in Extended Support.
There are two possible workarounds for this behaviour:
First, and I wouldn’t recommend it, is to allow Direct traffic through the Firewall to Office 365.
The advantage of this approach is that it will be done centralized and it will impact everyone immediately.
Information about the O365 IP addresses
There are two downsides to this behaviour:
1. First you need to maintain the Firewall exceptions as IP from O365 server can change without notice
2. Second, winhttp traffic may go through both proxy and direct and this can cause unforeseen behaviour.
The second approach is to use a proxy pac instead of manually setting in the proxy and the exceptions.
The advantage is that you will have centralized method to control how winhttp traffic goes and the issue will not be experienced anymore.
If a single pac does not be fit, you can configure proxy pac files for each site requirements and use an IIS server to store it.

Bypass Proxy for Local Addresses - Office 365 connection/ Outlook 2010

This is a strange one. Connectivity to Office 365 within our netwotk works fine although very slow for outlook 2010 client to initially connect. Once connected, it works ok. I have done a netwotk trace using netmon to see if i can identify
the reason for the slow startup (2 mins minumum for profile to load and for outlook to connect to exchange). The trace tell me that my local pc tries to make a direct connection to the office365 external IPs first, then tries the TMG proxy. Once it hits the
proxy, it kicks into life and works.
So it looks to me like it thinks the external IP address of office 365 is an internal address and spends it time trying all the ip addresses until it trys the proxy. At this point, the
Bypass Proxy Server for Local Addresses is ticked.
As soon as i untick this box, all traffic heads directly to the proxy and of course it connects like lighting. The exchange settings proxy is set in outlook for "on fast networks, connect using HTTP first, then connect using TCP/IP" (tick
is on) and the same for slow networks.
I cant for the life of me work out why it tries to connect directly to the external IPs first and not connect via TMG until i untick the
Bypass Proxy Server for Local Addresses
Would love any ideas that may assist.

We have been in discussions with Microsoft over the last few days on this issue - which is seen with Outlook 2007 versions onwards. Extract from resolution communication from Microsoft:
The issue you have raised is known as it has been reported and when you have a proxy set in Internet Explorer and “Bypass proxy settings for local addresses”, Outlook will attempt to connect to Office 365 directly – like the bypass rule would apply.
Because the direct connection is blocked in the Firewall, Outlook needs to have the connections going in Timeout before attempting to connect using the Proxy.
Your network trace proves the issue.
Microsoft have scheduled a fix for Outlook 2010 in February 2014 cumulative update. A fix for Outlook 2013 will also follow, but Outlook 2007 will not be addressed because it is in Extended Support.
There are two possible workarounds for this behaviour:
First, and I wouldn’t recommend it, is to allow Direct traffic through the Firewall to Office 365.
The advantage of this approach is that it will be done centralized and it will impact everyone immediately.
Information about the O365 IP addresses
There are two downsides to this behaviour:
1. First you need to maintain the Firewall exceptions as IP from O365 server can change without notice
2. Second, winhttp traffic may go through both proxy and direct and this can cause unforeseen behaviour.
The second approach is to use a proxy pac instead of manually setting in the proxy and the exceptions.
The advantage is that you will have centralized method to control how winhttp traffic goes and the issue will not be experienced anymore.
If a single pac does not be fit, you can configure proxy pac files for each site requirements and use an IIS server to store it.

Live Monitoring and Recording for VPN Remote CAD Agents in UCCX

Dear all,
We have deployed UCCX 5.0(2) for one of our customers.
Silent Monitoring and Recording are working fine for local agents.
We have deployed new Remote agents using IP Communicator and Cisco VPN on their PC. Everything is working fine but could not monitor or record them.
We have made site-to-site VPN using a PIX and give these agents Hard Phones 7942. Everything is working fine but could not monitor or record them.
We also installed WFO QM client on their PCs in order to record calls but no way !
Is there any way that we can use in order to make these agents silently monitored and recorded?
Thanks for all.

good afternoon,
I am not a senior guy but we experienced the same issues with monitoring users at home on VPN. After some trouble shooting I found that most users are on wireless and when I had them plug in with a cable we could hear their calls and record fine with no issues. Though, the agents preferred to be on wireless, of course! the senior engineer did mention something about changing the Codec and utilizing some DSP resources.
MM

Is there any Vi for getting the CPU and Memory usage of the Local as well as Remote System

Is there any Vi for getting the CPU and Memory usage of the Local as well as Remote System

Find the attachment(LV8.5) for local machines.
You can use shared variables to monitor the remote machine's usage.
Attachments:
Task Monitor 85.vi ‏25 KB

Remote Desktop "Bypass RD gateway server for local addresses" no longer working in Windows 8

Hi,
After installing windows 8, it seems like the "Bypass RD gateway server for local addresses" is no longer working.
In Windows 7, when the option is checked, I could have the server name set always and the client will automatically detect whether to use the RD gateway or not. For example, from my house, if I am connecting to a computer at my work, which requires
the RD gateway, it will automatically pops up the dialog for authentication method. However, if I connect to a computer in my home network, it will just automatically connects without asking authentication for the RD gateway.
However, after installing windows 8, this does not seem to work as expected anymore. The option is checked but the Windows Security dialog pops up in both situations and so i have to either save the rdp file locally and pin it to the taskbar or switch between
disabling and enabling the RD gateway whenever I need to connect to different machines.
Is this a regression in Windows 8? Is anyone else experiencing the same issue?
Thanks

Another way to resolve this issue for me, beside of configuring RDP to connect directly to server also on unmanaged network, will be to turn the "wifi" subnet in a managed network, as the "wired" subnet is.
The differences between thoses to subnets, dynamically assigned by the same DHCP server, are:
The "wifi" is in a private IP range, the "wired" is in a public IP range
There's an ACL on the "wifi" subnet, not on the "wired"
The next step is to compare frames send/received when on the two networks. Something will likely tell for the network to be managed.
Beside, I'm still searching informations about NLA, which is responsible for setting a nework as managed or not.
Here are some clues:
http://blogs.technet.com/b/networking/archive/2010/09/08/network-location-awareness-nla-and-how-it-relates-to-windows-firewall-profiles.aspx
http://social.technet.microsoft.com/Forums/windows/en-US/49ea0a6b-9c03-407d-8e26-24a92849a282/network-location-awareness-signature?forum=w7itpronetworking
If anybody has official MS informations about NLA (A for Awareness and not Authentication), please share!

I just want to share my experience or rather terrible experience with apple service.....I am soooo disappointed with the apple customer service at the local store in Tampa......every time they give u an appointment and make people wait for hours......ther

I am soooo disappointed with the apple customer service at the local store in Tampa......every time they give u an appointment and make people wait for hours......there was some cosmetic problems with the screen of my Mac book pro....they replaced it but the computer would not turn on....and btw when I went to pick up my computer the representative handover my computer to another guy without checking his id who was there to pick up his phone.......then I had to take it back second time this time they messed up my iWork...I took it back but they couldn't retrieve my history of purchase of iWork...and then when I installed the iWork at home...none of the applications is working.... .I will have to take is back fourth time.....I loved apple products but may be not anymore.......

Other than what Shotist007's remarks (which solves nothing) your experience is not common. First I would speak to the store manager to get things rectified for you. If that doesn't work out then I would contact AppleCare and speak to a customer service representative and complain via that venue.

Terms of Payment for Local and Import Purchase Order

Hello Experts,
I am SAP FICO Consultant, I am given a task of maintaining payment terms for local and import purchase order, I would highly appreciate your help in this regard. I know I can maintain payment terms via OBB8 but I am not sure that how to cover the following scenarios.
1. 100% Advance
2. 50% Advance, Balance in 07 Days (usually balance immediate with delivery is accepted but it is paid in 07 days for the record)
3. 25% Advance, Balance in 07 Days
4. 10% Advance, Balance in 07 Days
5. 30 Days Credit
6. 15 Days Credit
7. 07 Days Credit
IMPORTS
1. 100% Irrevocable LC in advance
2. 100% TT in Advance
3. 50% TT in advance & 50% before shipment.
Looking forward to hear from you.
Regards
Muhammad Yousuf Ali

Hi
<b>All the Local as well as the R/3 data gets stored in the SRM tables ->
BBP_PAYTERM (Terms of Payment, Backend-Dependent)
BBP_PAYTERM_TEXT ( Texts for Terms of Payment, Backend-Dependent)
BBP_TQ02B ( QM System)
BBP_TQ02U (Description QM system)
Also refer to Transaction SLG1 for the log created in this case.</b>
Hope this will help.
Please reward suitable points.
Regards
- Atul

Pkgman - a bash script for local package and PKGBUILD management

hi all,
here is a script which manages a local repository and lets you edit
PKGBUILDs and other related files, automatically generates checksums,
build packages, add them to your local repo and so on.
it also has AUR support for submitting tarballs, leaving comments, etc.
get it from here:
http://sourceforge.net/projects/pkgman/
and AUR package:
http://aur.archlinux.org/packages.php?ID=17100
you need abs, curl and pacman and optionally namcap and desktop-file-utils.
RTFM online:
http://sourceforge.net/apps/mediawiki/p … n_man_page
first of all copy the pkgman.conf and AUR.conf files from /usr/share/pkgman to ~/.config/pkgman/ or ${XDG_CONFIG_HOME}/pkgman - if ${XDG_CONFIG_HOME} is set,
edit these two files and then run
pkgman --runmefirst
pkgman doesn´t install anything. if you want it just builds the package and moves it to your local repository. install it then with pacman.
it also has no dependency handling. there are many other tools which provide this.
the main intention was to keep track of package versions, different PKGBUILD versions and own AUR submitted tarballs; also to keep a clean local repository and clean build directories.
pkgman is stable now. i´m using it for months without any issues.
however, if there are problems or feedback please post them here.
vlad
changelog:
version 2.4:
*pkgman now respects the PKGDEST and SRCDEST variables from makepkg.conf. (though it still moves the src.tar.gz and .pkg.tar.gz to package backup directory).
version 2.5:
*pkgman uses PKGDEST if SRCDEST not set in makepkg.conf.
version 2.6 -> r26:
*changed version system: version 2.6 is now r26!
*minor changes: > pkgman uses now the $SHELL variable.
> new and more comprehensible manpage description (thanks to bender02)
version r27:
*changed SRCDEST since it's only a cache dir. all files (pkg.tar.gz and src.tar.gz) go to PKGDEST.
version r28:
*added new variable ShellCommand to pkgman.conf. Default is $SHELL.
*One might use an external application (like screen or xterm) to switch to build directory and edit files simultaneously.
version r30:
*minor changes. nothing crucial
r32: *OverwriteExistingPackage isn't used anymore. one can delete it from ~/.config/pkgman/pkgman.conf.
*minor changes
version r33:
*"-l|--list" also shows installed package version and available ABS/AUR PKGBUILD version for given package.
*"-a|--abs" can now also be used with other options (like "-e")
r39: * when backing up src.tarballs it asks whether to backup the source file or not
* more detailed "--list" option - also shows if package is installed or not and available ABS/AUR version
* added prompt to clean up directory after makepkg
* when checking pkg.tar.gz also possibility to check for conflicts with files of already installed packages
* use $PAGER instead of less
* --help directly shows the manpage
* --shorthelp shows a brief usage overview
* added a custom prompt, but only when using bash (is somehow experimental - works fine here for me)
* minor internal changes
* pkgman also reads ~/.aurvote file for getting aur name and password. if one already uses aurvote then there is no need for the
~/.config/pkgman/AUR.conf file.
r40: * new manual page & rewrite of usage function
* both option "--flush" and "--flushall" were omitted in favor of the more versatile "--cleanup" option
* pkgman <packagename> checks now if <packagename> is owned by user
* backup option after each editing
* added license
* minor internal changes
r41: * just small bug fixes, nothing crucial.
r42: * more bugs fixed.
r45: * new options added:
> --listversions: list local and available versions of installed packages from LocalPackages directory
> --getownpackages: synchronize local own packages with AUR
* added new variable in pkgman.conf:
> ListOutputInPager: output of, for example, "--list" or "--own" is piped into $PAGER
* added a new optional dependency "desktop-file-utils" for validating desktop entry files
* also supports now auto-generation of sha sums not only md5
* internal fixes due to AUR interface changes:
> use of json interface
> correct parsing of package category
* added 2 proto files (located under /usr/share/pacman):
> proto.desktop: a template for *.desktop files
> PKGBUILD-lib32.proto: a template for lib32 packages for x86_64
* some code changes and fixes
r46: * added new option to pkgman.conf (AutoGenerateSums).
> if AutoGenerateSums=no then pkgman asks whether to generate checksums or not.
> if set to yes it behaves like in former versions.
r52: * "--getownpackages" with more than 100 packages works again
* added new option "--cachecopy":
For each package in CacheCopyList (new variable in pkgman.conf) get existing package from pacman's cache directory - if
CopyPkgFromCache (new variable in pkgman.conf) is set to yes - and/or create a source tarball of PKGBUILD and related files from ABS -
if CopySrcFromABS (new variable in pkgman.conf) is set to yes - and copy them to package backup directory.
* added new variables to pkgman.conf:
> "CacheCopyList=file" - batch backup file, one package per line - default location is "$HOME/.config/pkgman/package.list".
> "CopySrcFromABS=[yes|no]"
> "CopyPkgFromCache=[yes|no]"
* some bugfixes
* docs completed
* CacheCopyList should look like
package1
package2
#this is a comment
! this too
package3
!package4
r54: * renamed "--listversions" option to "--diffversions". makes more sense!
from the man page:
pkgman --diffversions
Show differing ABS/AUR versions of installed packages from LocalPackages.
r55: * minor changes.
r57: * testing release
* added a new option "--rollback":
"pkgman <packagename> --rollback" - checks http://arm.kh.nu for available package versions,
lets you choose one, fetches the package and
moves it to the <packagename> backup directory (if "--repoadd" is used).
r59: * stable release
* new option "--rollback" (see r57):
it checks http://arm.kh.nu (Arch Rollback Machine) for available package versions,
downloads chosen file and moves it to local repository (if "-r|--repoadd" is used).
* posting files/comments/etc to AUR should work now again.
r65: *stable release
* new option "-M,--meta" to create metapackages and add them and their dependencies to local repository.
it searches for deps inside the backup directories, pacman's cache and if the packages are not available, it tries to fetch the missing
dependencies from the Arch Rollback Machine site (http://arm.kh.nu).
r66: * minor fixes
r68: * some bugfixes
* "--repoadd" and "--Reporemove" now accurately removes old packages from LocalRepository
r69: * small bugfixes when listing packages with similar names
* curl retries now 5 times if connection is not established
r75: * "--cachecopy" does not try to dl sourcefiles when backing up ABS PKGBUILDs
* some work on package splitting
* further internal changes
r76: * minor mistakes with "ln" purged
r79: * mostly small changes
* "--cleanup" now also removes uninstalled packages from LocalRepository
r81 & r80: * added AUR v1.6.0 support (use more json)
* small ARM changes ("--rollback")
r85:
* pkgman supports pkg.tar.xz packages
* some code rewrite, bugs purged (hopefully)
r113:
* pkgman now supports building split packages through makepkg.
If you already use pkgman you need to rerun "pkgman --runmefirst" after updating.
* new "-t,--template" option ("pkgman <packagename> --template <alt. packagename> [--pkgbuildversion <version>] [options]").
Useful to create a new PKGBUILD and use an existing one as a template.
* new option: "--conf /path/to/alternate/conf/file" - Specify another configuration file.
* pkgman now uses ${XDG_CONFIG_HOME}/pkgman or $HOME/.config/pkgman - if first not set - as the default location for its conf files.
r116:
* check inet conection when submitting src tarballs to AUR
* some bugs
* updated manpage on sf
For further details please read the manual page.
Last edited by DonVla (2010-04-28 11:56:59)

I'm having some troubles with it (perhaps missing dependencies, and forgotten hardcoded dirs?):
jan@aconcagua 8:20PM ~ % pkgman --runmefirst
/usr/bin/pkgman: line 77: /home/jan/apps/skripte/archscripts/pkgman/share/pkgman/color.bash: No such file or directory
/usr/bin/pkgman: line 1293: initcolor: command not found
/usr/bin/pkgman: line 312: highlight: command not found
/usr/bin/pkgman: line 312: error: command not found
/usr/bin/pkgman: line 313: highlight: command not found
/usr/bin/pkgman: line 313: error: command not found
/usr/bin/pkgman: line 314: highlight: command not found
/usr/bin/pkgman: line 314: error: command not found
/usr/bin/pkgman: line 315: highlight: command not found
/usr/bin/pkgman: line 315: error: command not found
/usr/bin/pkgman: line 317: error: command not found
/usr/bin/pkgman: line 318: error: command not found
/usr/bin/pkgman: line 321: highlight: command not found
/usr/bin/pkgman: line 321: msg: command not found
/usr/bin/pkgman: line 329: list: command not found
/usr/bin/pkgman: line 332: list: command not found
/usr/bin/pkgman: line 332: list: command not found
touch: cannot touch `/bin/.pkgman.registered': Permission denied
/usr/bin/pkgman: line 332: list: command not found
/usr/bin/pkgman: line 332: list: command not found
/usr/bin/pkgman: line 332: list: command not found
/usr/bin/pkgman: line 332: list: command not found
/usr/bin/pkgman: line 332: list: command not found
/usr/bin/pkgman: line 337: msg: command not found
curl: option --output: requires parameter
curl: try 'curl --help' or 'curl --manual' for more information
^C/usr/bin/pkgman: line 209: cleanoutput: command not found
/usr/bin/pkgman: line 209: cleanoutput: command not found
(I terminated with ctrl-c).
EDIT: errors resolved by correcting the path $HOME/apps/skripte/archscripts/pkgman/share/pkgman to /usr/share/pkgman in the pkgman itself.
Last edited by bender02 (2008-05-23 01:28:58)

Trying to connect my new Apple TV to my Samsung flatscreen TV is blinking menu is there and can be accesed with the remote, but can be seen for one sec.

Trying to connect my new Apple TV to my Samsung flatscreen TV with a Belkin HDMI cable. Screen is blinking menu is there and can be accesed with the remote, but can be seen for one sec.

Changed the cable and its working.

CME and UCCX, G.729 for local/remote agents?

Similar Messages

Maybe you are looking for