CME GUI ISSUE

Hi ,
We have a CME set-up for one of our location.
Since last few days whenever we are trying to access  CME through WEB , we are getting " javascript:void(0)" error.
No issue with WEB login , but option are not clearly visible once we login.
If I click on the different options after login into CME WEB , everytime getting the same java error.
Cisco IOS Software   C3825-SPSERVICESK9-M
Software Version  12.4(24)T8 / CME 7.1
It doesn't seem to be PC/Browser specific issue because everyone getting the same error.
Restarting Telephony services won't able to resolve the issue.
Any assistance would be highly appreciated.
Thanks!

Hello Sandeep
What is the gui verion? can you paste below command
show flash | i gui
also you can please download a new file back from CCO and load it again after deleting previous one. Just a give it shot .
you can also refer CME version with compatible GUI
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/requirements/guide/33matrix.html
Br,
Nadeem 
Please rate all useful post.

Similar Messages

  • CME GUI Change Button Window - No Scrollbar??

    I'm having an issue with the CME GUI.
    When I try to change a phone button using the CME GUI, I find the change button window only displays 10 of the 40 ephone-dn, and there does not appear to be a scrollbar or page button to view the remaining 30 ephone-dn.??
    Am I missing something?
    Versions:
    CME:   version 15.2(4)M6, RELEASE SOFTWARE (fc2),
    GUI:    Version 9.0.0.0, thought the folder states "CME 10.0.0 GUI", was pulled from "cme-153-3Mv2.rar"
    The Screen shot below is from Chrome "Version 35.0.1916.153 m",
    Same result in IE 11.

    If you are in full screen mode then hover the mouse to the top to make the Navigation Toolbar and Tab bar appear.<br />
    You can click the Maximize button at the top right to leave full screen mode or right click empty space on a toolbar and use "Exit Full Screen Mode" or press F11.
    *https://support.mozilla.org/kb/how-to-use-full-screen
    You can check for problems with the localstore.rdf file.
    *http://kb.mozillazine.org/Corrupt_localstore.rdf

  • SAP GUI issues - VA41 - additonal data B screen is not visible completly

    Hello everyone,
    Tthere was a problem reported by one of our sales users that in VA41/VA42 screen, there are different tables available, there is a tab "Additional data B" for one user only half of the tab is visible in the presentation server. The user is not able to scroll right/left and couldn't do any data entry on that screen.
    Any one has any clue why this issue is only for this user.
    The GUI version and patch : 7.10 with Patch level 3 ( File version : 7100.1.3.1029)
    When we ask the user to try logging with his id in another PC, the table is visible completely. Both the desktop' GUI version is all the same. No other user is having this issue except one user. Hence I think it is related to GUI issue.
    If anyone faced this issue before, please suggest a resolution/workaround
    Please don't suggest for higher level patch, other PC's with the same level patch is working fine.
    Rajan

    We had a similar issue with a different t-code. The user also had a problem with Outlook and the CRM system we use. We eventually decided thet athe user's profile information was corrupted.
    We deleted the user's windows profile on the particular PC and then created it again. This fixed the problem - probably not the best answer, but it worked.

  • GUI issues in MARS

    Dear Friends,
    I have a MARS 100 appliance running ver 6.0.6 and some gui issues.
    I have to click on GO button the browser twice or thrice and only then it opens the page. This behaviour happens randomly with clicking different pages like Query page, Incident page and so on. So what i do is click on the Incidents page, if the progress bar below on the browser window freezes and never moves saying "Waiting", i then click on the Go button and then the page opens!! Sometimes i have to clock on go button multiple times.
    Has anyone else faced this issue?
    thanks a lot
    Gautam

    THe following
    is the sysstatus information
    sysstatus - 21:32:44 up 18 min,  1 user,  load average: 4.00, 4.20, 3.20
    Tasks: 175 total,   3 running, 172 sleeping,   0 stopped,   0 zombie
    Cpu(s): 37.7% us, 11.7% sy,  0.0% ni, 35.4% id, 15.0% wa,  0.2% hi,  0.0% si
    Mem:   4154060k total,  4137392k used,    16668k free,     2504k buffers
    Swap:  4200988k total,    31968k used,  4169020k free,  2866712k cached
      PID USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  COMMAND
    3305 pnadmin   18   0  239m 108m 7476 S 74.7  2.7   4:32.00 pnesloader
    3508 oracle    16   0 1329m 645m 642m R 44.1 15.9   2:00.48 oracle
    3335 pnadmin   16   0  560m 143m  15m S 21.1  3.5   5:55.85 pnparser
    3037 oracle    18   0 1358m 731m 700m D  9.6 18.0   3:41.65 oracle
    2805 pnadmin   18   0 1063m 333m  14m S  1.9  8.2   4:36.50 java
    2886 oracle    15   0 1343m  75m  73m S  1.9  1.9   0:10.28 oracle
    3320 pnadmin   18   0 98.7m  37m 8984 S  1.9  0.9   0:38.36 process_postfir
        1 root      15   0  3324  568  480 S  0.0  0.0   0:01.02 init
        2 root      RT   0     0    0    0 S  0.0  0.0   0:00.03 migration/0
        3 root      34  19     0    0    0 S  0.0  0.0   0:00.00 ksoftirqd/0
        4 root      RT   0     0    0    0 S  0.0  0.0   0:00.04 migration/1
        5 root      34  19     0    0    0 S  0.0  0.0   0:00.00 ksoftirqd/1
        6 root      RT   0     0    0    0 S  0.0  0.0   0:00.01 migration/2
        7 root      34  19     0    0    0 S  0.0  0.0   0:00.00 ksoftirqd/2
        8 root      RT   0     0    0    0 S  0.0  0.0   0:00.03 migration/3
        9 root      34  19     0    0    0 S  0.0  0.0   0:00.00 ksoftirqd/3
       10 root       5 -10     0    0    0 S  0.0  0.0   0:00.00 events/0

  • CME GUI 8.8 Not Displaying Properly

    When I login to the CME GUI, and I am unable to do anythign. The dropdown menus are not accessible. I am running v8.8. I have downloaded the latest files. I am running IOS c2900-universalk9-mz.SPA.152-1.T1.bin
    Everything that I can tell looks right but it still does not work.

    I have confirmed that I have the correct files. They are also the same files that I am using on onther working systems. I am using IE8. It works with the other working systems.

  • Downgrade cme gui

    if i uploaded cme-gui-4.1.0.2 on my 2801 and decided to load cme-basic-3.4.0.0, do i still require to load a 3.4.0.0 gui?
    if it realy requires, can i upload the new gui without deleting the previous gui's?
    thanks

    Example for 4.1. But as I said before, you copy the other files in a different directory, no need to delete anything, and easier to switch back.
    CME#dir GUI
    Directory of flash:/GUI/
    35 -rw- 653758 Nov 15 2007 12:05:18 +01:00 admin_user.js
    36 -rw- 16344 Nov 15 2007 12:05:18 +01:00 dom.js
    37 -rw- 864 Nov 15 2007 12:05:20 +01:00 downarrow.gif
    38 -rw- 6146 Nov 15 2007 12:05:20 +01:00 ephone_admin.html
    39 -rw- 4658 Nov 15 2007 12:05:20 +01:00 logohome.gif
    40 -rw- 3724 Nov 15 2007 12:05:20 +01:00 normal_user.html
    41 -rw- 80033 Nov 15 2007 12:05:22 +01:00 normal_user.js
    42 -rw- 843 Nov 15 2007 12:05:22 +01:00 sxiconad.gif
    43 -rw- 2410 Nov 15 2007 12:05:22 +01:00 telephony_service.html
    44 -rw- 870 Nov 15 2007 12:05:22 +01:00 uparrow.gif
    45 -rw- 9968 Nov 15 2007 12:05:24 +01:00 xml-test.html
    46 -rw- 3412 Nov 15 2007 12:05:24 +01:00 xml.template
    47 -rw- 4627 Nov 15 2007 12:05:10 +01:00 admin_user.html
    48 -rw- 1029 Nov 15 2007 12:05:18 +01:00 CiscoLogo.gif
    49 -rw- 618 Nov 15 2007 12:05:18 +01:00 CME_GUI_README.TXT
    50 -rw- 953 Nov 15 2007 12:05:18 +01:00 Delete.gif
    51 -rw- 1347 Nov 15 2007 12:05:22 +01:00 Plus.gif
    52 -rw- 174 Nov 15 2007 12:05:22 +01:00 Tab.gif

  • CME GUI Download

    For the life of me I can not find the .tar file for the cme gui for 9.1...
    Any assistance would be most appreciated...

    Hi Jeff,
    It should be within the "full set";
    Downloads Home
    Products
    Voice and Unified Communications
    Call Control
    Mid-Market Call Control
    Cisco Unified Communications Manager Express
    Unified Communications Manager Express Complete Support File Set-9.1
    Cheers!
    Rob
    "Why do the best things always disappear " 
    - The Band

  • Lost CME GUI

    Was working, now is not. I get auth prompt and can login, then window goes blank. I'm running CME 4.0(1), CUE 2.3, Using IE 6. Tried several workstations. I've re-installed the CME-Basic and CME-GUI files, still same thing. CUE GUI works ok, but links to CME within CUE GUI fails. IOS - c2800nm-adventerprisek9-mz.124-4.XC2

    Thanks for the response, I'm working with TAC on this one. Apparently certain characters in the name or lable fields is what's causing it, such as * ( ) '. I've removed those characters and the CME Extensions works within the CUE GUI, but the CME GUI itself still does not work.

  • 8.6 CME gui not working on Internet explorer but displays on other browsers

    The strangest thing is happening I cannot access the CME 8.6 GUI on internet explorer but it works on firefox and chrome.  It just suddenly started to happen no changes were made.  When I open the gui on internet explorer after I sign in it just says View Window but never gets passed that.  I have a test router with the same version and files and it works on internet explorer.  I compared the files on both routers and both have the same files.  I'm stumped any help would be greatly appreciated.

    Is there anything in version 15.1 that can cause the issue I'm having? I have ip http server and no ip http secure-server in my config is there anything with that I have to add?  I just downgraded back to 12.4 and it works after a hard reset.  I want to attribute the problem to version advip 15.1.  I have the gui files from 15.1 loaded on flash.  

  • SAP GUI issue with Portal on Windows Vista

    Hello.  I am using Windows Vista on my laptop.  We use the portal to access our SAP systems.  I have SAP GUI 7.1 installed on my machine.  When I click my WIN GUI link from inside the portal I get a download file request.  I download the file, however I have to click on the WIN GUI link a second time for the GUI to actually open  I am using IE 7.0 as well.
    Please advise if you know how to resolve this issue.
    Thanks,
    Stuart

    try installing patch 5 for  SAPGUI from ftp://ftp.sap.com/pub/sapgui/win/710/patches/

  • CME SIP issue - Cisco 7821 phone not registering

    Hi
    I am having issues with getting a Cisco 7821 phone to register.
    Current deployment is with Cisco 6921 phones SCCP registration
    SIP integration with CUE
    SIP integration with Mitel system
    c2951-universalk9-mz.SPA.154-3.M1.bin (CME 10.5)
    In flash:
    rootfs78xx.10-1-1SR1-4.sbn
    kern78xx.10-1-1SR1-4.sbn
    sboot78xx.10-1-1SR1-4.sbn
    sip78xx.10-1-1SR1-4.loads
    The 7821 phone gets IP address but fails to register. Please could somebody let me know why phone is not registering.
    Configuration below (10.245.226.132 is CME address) .
    voice service voip
     allow-connections h323 to h323
     allow-connections h323 to sip
     allow-connections sip to h323
     allow-connections sip to sip
     fax protocol pass-through g711ulaw
     modem passthrough nse codec g711ulaw redundancy maximum-sessions 5
     h323
     sip
      registrar server expires max 600 min 60
      options-ping 90
    voice class codec 1
     codec preference 1 g711alaw
     codec preference 2 g711ulaw
     codec preference 3 g729r8
    voice register global
     mode  cme
     source-address 10.245.226.132 port 5060
     max-dn 30
     max-pool 10
     load 7821 sip78xx.10-1-1SR1-4
     authenticate register
     authenticate realm all
     timezone 22
     date-format D/M/Y
     voicemail 590
     tftp-path flash:
     create profile sync 0061443538560005
     network-locale GB
    voice register dn  1
     number 1010
     name user1
     label user1
     mwi
    voice register pool  1
     busy-trigger-per-button 2
     id mac F09E.636E.63F2
     type 7821
     number 1 dn 1
     presence call-list
     dtmf-relay rtp-nte
     username 1010 password 123
     codec g711ulaw
     no vad
    dial-peer voice 391 voip
     description *** Auto Attendant ***
     destination-pattern 399
     session protocol sipv2
     session target ipv4:10.245.226.131
     dtmf-relay sip-notify
     codec g711ulaw
     no vad
    dial-peer voice 392 voip
     description *** Administration Via Telephone ***
     destination-pattern 392
     session protocol sipv2
     session target ipv4:10.245.226.131
     dtmf-relay sip-notify
     codec g711ulaw
     no vad
    dial-peer voice 393 voip
     description *** Extension Assigner ***
     service ea out-bound
     destination-pattern 393
     session target ipv4:10.245.226.132
    dial-peer voice 590 voip
     description *** Voice Mail Pilot ***
     destination-pattern 590
     b2bua
     session protocol sipv2
     session target ipv4:10.245.226.131
     dtmf-relay sip-notify
     codec g711ulaw
     no vad
    dial-peer voice 1 pots
     description ** Match all incoming POTS calls **
     translation-profile incoming IncomingPSTNcalls
     incoming called-number .
     direct-inward-dial
    dial-peer voice 899 voip
     description Call to Mitel
     translation-profile incoming Prefix9
     translation-profile outgoing rem44
     destination-pattern [23]..
     session protocol sipv2
     session target ipv4:192.168.114.2
     voice-class codec 1 
     dtmf-relay rtp-nte
     no vad
    interface GigabitEthernet0/0
     description *** Connection to Mitel Phone System  ***
     ip address 192.168.114.5 255.255.255.248
     duplex auto
     speed auto
    interface ISM0/0
     description *** Connection to Cisco Unity Express ***
     ip unnumbered GigabitEthernet0/1
     service-module ip address 10.245.226.131 255.255.255.128
     !Application: CUE Running on ISM
     service-module ip default-gateway 10.245.226.132
    interface GigabitEthernet0/1
     description *** Connection to IP Phone LAN ***
     ip address 10.245.226.132 255.255.255.128
     duplex auto
     speed auto
    ip http server
    ip http authentication local
    ip http secure-server
    ip http timeout-policy idle 60 life 86400 requests 10000
    ip http path flash:
    ip route 0.0.0.0 0.0.0.0 10.245.226.129
    ip route 10.245.226.131 255.255.2
    tftp-server flash:apps37sccp.1-4-4-0.bin
    tftp-server flash:sip78xx.10-1-1SR1-4.loads
    tftp-server flash:rootfs78xx.10-1-1SR1-4.sbn
    tftp-server flash:sboot78xx.10-1-1SR1-4.sbn
    sip-ua
     mwi-server ipv4:10.245.226.131 expires 3600 port 5060 transport udp
     registrar ipv4:10.245.226.132 expires 600
    gatekeeper
     shutdown
    telephony-service
     authentication credential cmeadmin c4p1ta2012
     xml user xmladmin password xmladmin 15
     extension-assigner tag-type provision-tag
     max-ephones 104
     max-dn 299
     ip source-address 10.245.226.132 port 2000
     auto assign 101 to 105
     no service directed-pickup
     timeouts interdigit 5
     system message CFGS
     url services http://10.245.226.131/voiceview/common/login.do
     url authentication http://10.245.226.132/CCMCIP/authenticate.asp 
     cnf-file location flash:
     cnf-file perphone
     load 7931 SCCP31.9-2-1S
     load 6921 SCCP69xx.9-2-1-0
     time-zone 22
     date-format dd-mm-yy
     voicemail 590
     max-conferences 8 gain -6
     call-forward pattern .T
     moh enable-g711 "music-on-hold.au"
     web admin system name cmeadmin secret 5 $1$QmIK$46fDKVSudMxzI2bRp/Ef7/
     time-webedit
     transfer-system full-consult
     transfer-pattern .T
     secondary-dialtone 9
     create cnf-files version-stamp Jan 01 2002 00:00:00
    ephone-dn  298
     number 598...
     mwi on
    ephone-dn  299
     number 599...
     mwi off

    Page 7 of the following link recommends that you use option 150 with the Cisco 7800 series phones and use option 66 if you cannot use option 150
    http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/7821_7841_7861/10_1/english/admin_guide/PA2D_BK_AB3F74DA_00_admin-7821-7841-7861-10_0/PA2D_BK_AB3F74DA_00_admin-7821-7841-7861-10_0_chapter_01.pdf
    Dynamic Host Configuration Protocol (DHCP)
    DHCP dynamically allocates and assigns an IP address to network devices.
    DHCP enables you to connect an IP phone into the network and have the phone become operational without your needing to manually assign an IP address or to configure additional network parameters.
    DHCP is enabled by default. If disabled, you must manually configure the IP address, subnet mask, gateway, and a TFTP server on each phone locally.
    Cisco recommends that you use DHCP custom option 150. With this method, you configure the TFTP server IP address as the option value. For additional supported DHCP configurations, go to the "Dynamic Host Configuration Protocol" chapter and the "Cisco TFTP" chapter in the Cisco Unified Communications Manager System Guide.
    Note   
    If you cannot use option 150, you may try using DHCP option 66.

  • GUI Issue

    I am trying to work with screen painter (se51) in ECC 6.0, Gui 710.
    However when we click on the form layout, getting a error message 'EU_SCRP_WN32 : timeout during allocate / CPIC-CALL : 'ThSAPCMRCV'.
    Is there any patch that we need to install or and settings that we need to do to get it working.

    Hi,
    Can you check and implement sap note "204910" for the mentioned issue, also try reinstall Sapgui and add 'graphical screen painter' option.
    Please let me know the result.
    Thanks,
    George

  • 10.8.3 Fix for Logic's Unresponsive GUI issue?

    Well, 10.8.3 is out with a  fix for the Logic GUI Lag / Non responsive plugins.... issue
    -The ability to redeem iTunes gift cards in the Mac App Store using Mac’s built-in camera
    -Boot Camp support for installing Windows 8
    -Boot Camp support for Macs with a 3TB hard drive
    -A Fix for an issue that could cause a file URL to quit apps unexpectedly
    -A fix for an issue that may cause Logic Pro to become unresponsive when using certain plug-ins
    -A fix for an issue that causes audio to stutter on 2011 iMacs
    -Includes Safari 6.0.3
    First reports are very encouraging with the one remaining client of mine who had this issue, reporting back a successful fix and no sign of the issue at all after updating this afternoon.
    As I however, never had this issue myself on any of my systems here, I cannot personally confirm if the fix actually works this time or not, but please add your own experiences to this thread and hopefully this is the good news many users have been waiting for.
    Cheers..

    Here is the full list of fixes in 10.8.3 and Safari 6.0.3
    Mountain Lion OS X 10.8.3
    - The ability to redeem iTunes gift cards in the Mac App Store using your Mac’s built-in camera
    - Boot Camp support for installing Windows 8
    - Boot Camp support for Macs with a 3 TB hard drive
    - A fix for an issue that could cause a file URL to quit apps unexpectedly
    - A fix for an issue that may cause Logic Pro to become unresponsive when using certain plug-ins
    - A fix for an issue that may cause audio to stutter on 2011 iMacs
    - A fix for an issue in Contacts that may cause cards to print out of order
    - A fix for an issue that may cause the desktop picture to change after logging out or restarting
    - A fix for an issue in Messages that may cause messages to appear out of order after waking from sleep
    - A fix for an issue that may cause the screen to display incorrectly after waking from sleep
    - Improves compatibility with IMAP servers in the Notes app
    - Allows the Slideshow screen saver to display photos located in a subfolder
    - A fix for an issue in Contacts that may cause addresses to print in the wrong location
    - Reliability improvements when using a Microsoft Exchange account in Mail
    - Xsan reliability improvements
    - A fix for an issue that could cause Active Directory accounts to be locked out after accessing the Security & Privacy pane in System Preferences
    - A fix for an issue that could cause link aggregation to not complete after a restart
    - A fix for an issue that could cause delays when logging into an Active Directory account on high latency networks
    Safari 6.0.3
    Safari 6.0.3 is included in the OS X Mountain Lion v10.8.3 Update and contains fixes that improve performance, stability, and security, including:
    - Improves scrolling on facebook.com
    - Improves scrolling while zoomed in on a webpage
    - Improves performance on webpages with plug-in content
    - A fix for an issue that could cause the inaccurate appearance of an alert that bookmarks can’t be changed
    - A fix for an issue that could cause duplicate bookmarks to appear on an iOS device after editing bookmarks with Safari in OS X
    - A fix for an issue that permitted users to access unfiltered search results when searching from google.com when Parental Controls are enabled
    - A fix for an issue that could prevent Safari from restoring the last position on a webpage a user navigated back to
    Note:
    As always,
    Please backup your current System Hard Drive before installing this update. I would suggest you use a Hard Drive Cloning program such as Carbon Copy Cloner or SuperDuper! (rather than rely on Time Machine backups) for ease of reverting back to your current setup should things goes awry after updating.

  • Sharing in GUI Issues

    This should be fairly simple I hope.
    I use openbox with thunar and thought it might be a nice idea to use the thunar shares plugin.
    Installed and followed the instructions on the wiki page to the letter.
    For some reason when I try to create a share in the GUI I get the error: "You are not the owner of the folder" and the boxes are greyed out.
    If I try the same thing in Nautilus shares it is also unsuccessful and immediately asks for the root password and failure to supply it leads to a greyed out box.
    I can put the root password in each time but as it is 53 characters long I'd rather not have to.
    Just to clarify, everything works fine if run as root.
    Did a forum and google search and just got a German forum post that was not resolved.
    Screenshot attached to show issue and permissions:
    http://i52.tinypic.com/abtm34.png
    As usual all suggestions and any help or pointers are much appreciated.
    Last edited by llawwehttam (2011-07-13 15:42:55)

    Hi all,
    same issue here.
    I'm using:
    3.0-ARCH x86_64
    xfce 4.8.0
    Thunar 1.2.2 (Xfce 4.8.0)
    Sharing don't work also with kernel 2.6 (if may usefull knowing this)
    i think and remember (not sure at all) the same impossibility to share folder when using gnome-shell/gnome-shell-git and nautilus/thunar.
    Last edited by Paracarro (2011-08-16 10:58:25)

  • Websphere support and IDM console gui issue....

    Hi,
    Does anyone know if/when SUN plan to support Websphere 7.0 with IdM 8.0?
    Also when using the IdM GUI it doesnt display the account fisrtname and surname only the account ID's. Editing and resaving each account proceeds to 'clear' these fields....im guessing this is a bug in 8.0 and requires a patch (which im not authorized to download as im only evaluating the product at the moment)?
    Thoughts?
    Thanks,
    Ant.

    Hi Alex,
    Thanks for the reply, but if you check the link you sent me it indicates that a valid support contract is required to specifically download the 8.0 patch 5. As i mentioned im just evaluating the software at present so obviously dont have a support contract, although i do have a sunsolve account.
    Is this actually correct or is it a misconfiguration issue on SUN's side preventing me from downloading it?
    Note: all other patches with the exception of 'IDM7.1 Update 1 - Patch 10' do not seem to be locked down to contract accounts only.
    Please can you advise?
    Many thanks,
    Ant.

Maybe you are looking for