CME number stripping for outgoing calls

Hello all, I hafe a problem with CME for outgoing calls to the PSTN. Internalnumbers are 3 digits long. Numbers from PSTN are 7 digits long. Incvommin calls working fine. Outgoing calls are working also, but the first 4 digist from the nummer are twice in the calling number on the reciver side. Is there any workaround to fix this? Any suggestion are wellcom.
PS. Sitting in germany!

Hi Mehmet,
I know there are better ways to do this. Thank you for your suggestion. I will change to translation rules.
I have other problems probably you can help me. I have a translation-rule for incoming calls to show the leading 0's.
voice translation-rule 11
rule 1 /\(^.*\)/ /0\1/ type national national
rule 2 /\(^.*\)/ /00\1/ type international international
voice translation-profile 0prefix
translate called 11
dial-peer voice 3 pots
translation-profile incoming 0prefix
If I test the rule all working fine, but in real the rule dos not work.
test voice translation-rule 11 1243 type international
Matched with rule 2
Original number: 1243 Translated number: 001243
Original number type: international Translated number type: international
Original number plan: none Translated number plan: none
test voice translation-rule 11 1243 type nat
Matched with rule 1
Original number: 1243 Translated number: 01243
Original number type: national Translated number type: national
Original number plan: none Translated number plan: none
I am not sure I have a problem with the IOS.
Greetings
Rene

Similar Messages

CUCM: Third Party SIP Phone "Caller ID" is not displaying for outgoing calls

Hi Team,
we are running CUCM 9.1(2a),
we have integrated Third Party SIP Phone(Avaya 1230 SIP Phone) with CUCM,
Issue: Third Party SIP Phone "Caller ID" is not displaying for outgoing calls, we are able to see only the dailed Number,
When "A" calls to "B", "A" can see only the dailed number of "B" but not the "Caller ID"
Regards
Ananthakumar

Are A and B both Avaya phones?
So it looks like you're not seeing the alerting name/connected name getting updated then? Do you have alerting names configured on the directory numbers? Might need to take a look at the SIP messaging to see if the alerting name/connected name is being sent to the Avaya phones and maybe they just aren't displaying it. Might just be something that needs to be tweaked in the 46xxsettings.txt file.

Fax line used for outgoing calls when incomming fax not coming in?

So is there a way to do this? Can I route the 1 FXO to FXS for incomming calls (and plug fax into FXS) or something like this and then use that line as an outgoing line when not in use?
I don't need step but steps but the basics of how something like this could be configured would be awesome!!!

I'm not sure if I understand. I set this up, so I understand phone systems enough to do this, but I don't really don't know the terminoligy.
Let me back up.
Currently our business has 2 lines and a fax line. Right now the two lines are plugged into 2 FXO ports and the fax line is just plugged into the fax machine--not the UC320. We're in mixed mode, not pbx specifically. We get one or two faxes a day and we send two or 3 faxes a day. We'd like to be able to use the fax line for outgoing calls when it's not being used for fax.
So I need to be able to control the in and the out of the fax line. I need all incomming calls for the fax number routed to what I assume would be the FXS port (with the fax machine plugged into the FXS port), and none of the other lines routed in this way (the other lines would go to the attendant).
Then I need if we send a fax, we need for when the fax machine opens the line for it to automatically be routed to the fax line. Then the fax machine can dial and send faxes. I think we send few enough faxes that we're not too worried about what happens if we try to send a fax and the phone is busy, but it would be nice to be able to look at a phone and tell if the fax line is in use.
I don't really care if the Fax line is part of a shaed FXO, it can be a seperate choice on the phone for making outgoing calls (one of the buttons next to the screen or something).
Is all this possible? Is it only possible in PBX style or is mixed ok?

Have an older model flip phone (cdm8945 DIG) and somehow it is locked for outgoing calls. how can i unlock it. lost original manuel. thanks,

i have an older flip phone (CDM8945 DIG ) and somehow it is locked for outgoing calls? how can i unlock it? lost the original manuel. thanks,

LOCK
Locks your phone and prevents unauthorized use.
Phone can only be used after inputting the password.
1. To lock the phone, press and hold
2. To unlock the phone, press (phone button)
then input the password.
Lock feature will deactivate when the phone is
powered off. Upon next power up, you will need to
press
to lock phone again.
The default password is the last 4 digits of your
phone number
See this link for text with pictures of buttons included:
http://www.manualslib.com/manual/12151/Audiovox-Cdm8940.html?page=16#manual
Here is a link to the whole manual (model 8940 but close enough)
http://www.manualslib.com/manual/12151/Audiovox-Cdm8940.html

Seperate number range for outgoing & incoming documents in the cash journal

Hi all:
i want to know is there a method to have seperate number range for outgoing & incoming documents in the cash journal,I saw that there is a numbering group in ECC6 and i created a numbering group for both incoming & outgoing as well as i define number range for them,and when i tested it always takes the number range of the document type assigned in transaction FBCJCO.
define number range of the numbering group in T.C : FBCJC6

HEllo,
It's not possible to assign this different number ranges:
If you check the SAP note 532888 you'll see the following:
" - Different number ranges for receipts and expenditures
For reasons of clarity, this is not provided - there are already
two numbers per cash journal document (fields POSTING_NUMBER as
well as D_POSTING_NUMB)."
Regards,
Renan

[PAP2] Configuring Multiple Service Providers for Outgoing Calls

I'm trying to configure my PAP2 with Gizmo project (for incoming calls) and VOIPCheap (for outgoing calls).
I tried to use the dialplan:
(xx.<:@voipcheap.host.xxx:5060; usr=myvoipcheapuserid; pwd=myvoipcheappassword; >)
But this doesn't seem to work. But when I configure the line for the VOIPCheap provider, then I am able to make calls through that account.
Can someone help me configure my PAP2 adapter please?
Thank you very much in advance.
Sekhar.

I shall have found this post a bit earlier... sik!
I have 2 PAP2T 'listenning' to 3 different providers (1 is common); that works... but to be optimal, both ATAs should allow using a 4th provider for outgoing calls.
The ATA administration guide shows an example of a dial plan such as <8,:1408>xxxxxxx<:@pstn.Linksys.com:5061;usr=joe;pwd=joe_pwd;nat>
Unfortunately, it applies for AG310 and SPA3102...
VoIP_Addict, I guess that if you did find some time to 'play' with this, you can only confirm what has been said in this post, right?

Change iPhone number for outgoing calls from mac (Yosemite)

I have two iPhones, and one of the iPhone is set for iPhone cellular calls (handoff) in macbook under FaceTime preference. How to change this number so that I can make outgoing calls from different iPhone?

Hi,
If you Erased the Drive and set up the computer anew it will depend on how you migrated/imported your Mac User Account (if you even did).
Mostly the process will make the Mac seen as a "New" computer.
In some cases this will means settings that involve some sort of "pairing" will not work.
You may also get to the point of having 5 "devices" linked to iTunes because of this.
I have G4 that is coming up on 121 years old.
It has 4 drive bays and some of the drives are partitioned.
It will boot into OS 9 and every version of OS X up to and including Leopard (OS X 10.5)
I have tended to Clone the current set up and then Update the main Drive.
It does mean though that iTunes counts them all individually.
On top of that I have a Snow Leopard MacBook Pro and my current Yosemite booted iMac (It also has Older OSes on External Drives)
The outcome is that you might have to re-link the two devices.
9:38 pm Friday; January 2, 2015
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Prevent called party number changes on outgoing call to PSTN

Hello Folks,
we have CUCM 9.1 with SIP trunks to cisco 2951 connected to the PSTN either by BRI or PRI module.
we have implemented internal full e.164 (including +) dialplan
when    we do an outgoing call (via SIP trunk and 2951) the phones first shows   the full e.164 number i.e. +4970366431002. As soon as the call goes out to the PSTN, the display changes to the number format in which the 2951 sends the call to the ISDN.
Because in ISDN there is no +, the gateway translates the called number to (in this example) 70366431002 TON national. and sends this back to CUCM in the Session progress Remote-Party-ID value (see output from debug on the 2951 below)
how can we prevend that the phone is showing this number instead of the original number?
thanks a lot - mat
debug isdn q931
    Calling Party Number i = 0x1081, '497142500290'
        Plan:Unknown, Type:International
    Called Party Number i = 0xA1, '70346431002'
        Plan:ISDN, Type:National
debug ccsip messages:
Sent:
SIP/2.0 183 Session Progress
Via: SIP/2.0/TCP 10.1.60.2:5060;branch=z9hG4bK3b5c02cb10b0d
From: <sip:[email protected]>;tag=3018449~a209bda8-de62-43dc-9e6a-6ebfafc31bde-46236303
To: <sip:[email protected]>;tag=ED03BF44-10BA
Date: Mon, 02 Sep 2013 12:41:56 GMT
Call-ID: [email protected]
CSeq: 101 INVITE
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
Allow-Events: telephone-event
Remote-Party-ID: <sip:[email protected]>;party=called;screen=no;privacy=off
Contact: <sip:[email protected]:5060;transport=tcp>

Hi,
any calling or called transformation in the route pattern appears in the screen.
you can discard the 9 in the route pattern and add prefix 9 in the route list level.
for the 2nd point there is a service parameter in the call manager to keep the original dialed number
HTH
Anas
don't forget to rate the helpful posts

How do you change home city for outgoing calls

I am trying to figure out how to change my the city that displays on the other phone when I make an outgoing call. Any way to change this?

No, it's not possible to change that, at least not without changing your phone number. The other person's phone is getting information from the network based on your area code and exchange (or whatever they're called where you live).

Source IP for outgoing calls

Running Exchange 2013 CU1.
IP gateway is expecting SIP to come from a specific IP address. Is there any way to configure outgoing calls to the UM IP gateway to send from a specific IP address?

Sorry, I know this is old, but with 2013 you'd either need to assign UM services to a single box or alternatively, change your gateway to route to and accept calls from a few IPs.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications

Setting a time limit for outgoing calls SPA3102

I need to put a time limit, say, 5 min, on outgoing calls with a certain prefix (are code). Is it possible with SPA3102 dialplan or otherwise? Thanks.

Based on my best knowledge - no, it's not possible with just SPA3102 only.
It is switch (PBX) job to terminate the call.

App for tracking outgoing call usage

I've been searching around the App Store, but haven't found what I'm looking for yet. I'd like to be able to track my OUTGOING call usage (not total call time like the iOS provides). My other need is to be able to track the number of outgoing SMS messages (I did find an app for that however, but it would be great if there was one app that could do both).
I live in Brazil and cell phone usage is very expensive. However, we're only charged for outgoing call time, which is why I need to keep track of it.
Thanks...

You won't find any apps that will do what you want. No app would have access to the private API's necessary. If your carrier does not provide this info(some do throught their own apps), there is no way to obtain it.

Cannot connect outgoing call to one specific cell number on the Verizon network.

Cannot connect to a specific number with an outgoing call. The call goes to voicemail after first ring. Can call the same number on a different phone with no problems. Is there a setting I accidentally activated. I have been able to call the number in the past.

@Newmie,
I appreciate reaching out to us regarding the calls going through. I can understand how this can be an inconvenience to you. Please complete a soft reset by holding down the power button and home button simulataneously. If you still run in to issues with the call again please ensure that the contact information is correctly entered. We want to ensure that you are able to reach this particular contact number.
YosefT_VZW
VZW Support
Follow us on Twitter @VZWSupport

How do I hide my name for phone calls

How can i set my bb classic so that only my number shows up for incoming calls (my name hidden to the caller) and for outgoing calls (my name hidden to the person I'm calling)?

Basically you can't do what you want. You can go to settings and check to 'not show phone number' when making a call. The Caller ID is handled by your carrier, you certainly can try but I don't think you'll be successful in having them remove your name. You might able to get them to change it for example to your company name. There are lots of people making calls with VOIP phones doing robo calls to sell you stuff that have solftware that allows them to play games with their caller ID but that's outside your scope. Lastly, lots of people don't answer calls when you block your number (it shows up Caller ID Blocked) but you can decide on that..

Best practice for displaying calling party ID

I have several different office codes in a CM 4.0. I need to prepend the area code and first two digits to the actual 5 digit extension for outgoing caller ID. I am doing this by setting External Phone Number Mask on each line and telling my route group to use that value. Is this the best way to display caller ID in this situation?

You can do this any way you want. You can check ext. ph number mask and set the mask on each phone. If you dont want to do this (too much work), you can set the prefix at the route pattern or route list level. route list level overrides route pattern level.
HTH
Sankar
PS: please remember to rate posts!

CME number stripping for outgoing calls

Similar Messages

Maybe you are looking for