CME - Second Call Drop the first call

Greetings,
Anyone ever seen something like this?
I get a call on my extension, and when I receive a call on another phone, the first call (in my Phone) drops.

I'm seeing this also with IPC softphone version 8.6.
Has anyone resolved this issue?

Similar Messages

  • How to quickly pick up a 2nd call and drop the first call

    If I am on a phone call, and then a second call comes in, then how can I quickly pick up the second call and DROP the first call?  I can do it if I put the first call on hold but then I have two calls going.  If I simply END the first call, then it takes 5 or 6 seconds for the second call to come in.  Several times I have lost the second call because it took too long to transition over. 

    never mind i did a direct chat with a skype rep and got my answer which is no.

  • Cannot pick up calls on wait, Cannot make a second call holding the first call

    I have a really weird problem with my iPhone 5S. (iOS 7.1)
    1. When I am on a call, I am not able to pick up a second call that is on wait. I can see the second call, I can hear the beep sounds but as soon as I pick up, the call freezes in 00.00 time, and My first caller is still active, not on hold.
    2. When I am on a call, I am not able to make a second call placing the first call on hold. The second call disconnects immediately with 3 beeps.
    3. I am able to see the incoming calls on wait, when I am already on a call. I am able to hear the beeps coming in. SO it means the call waiting is on (Tried turning it on/off/on too.) But when I pick up the call, the above problem comes in.
    What have I tried to solve this: (None of them helped)
    1. I tried a hard reset of my iPhone (Holding Power and Home button)
    2. I tried toggling the Call waiting button
    3. I tried resetting network settings.
    4. I called my Operator for assistance. I am using Airtel, India. They told me to dial this code - *43# . I tried it and it gave me this screen. But the problem is not solved yet.
    Is there anybody here who is facing the same issue with your iPhone? I never had this problem with my iPhone 4.

    Make sure you do not have "Do Not Disturb" turned on. This feature will block the first call, but is someone calls right back it will be put through.
    On the iPhone, go to Settings/Do Not Disturb
    Make sure you do not have Do Not Disturb turned on manual or scheduled.

  • Verizon's iPhone 4S is dropping the first call almost all the time?

    Hi.
    I have a verizon iPhone 4S.
    Everytime I make the first call to someone, I don't hear anything.
    When I end that call and try calling again, it works.
    This has been happening almost all the time.
    I tried letting the phone app turned on but it doesn't solve the problem.
    I'm not sure if other carrier's iPhones are having this problem.
    Does anyone know what the problem is to this?
    Thank you very much.

    I tried letting the phone app turned on but it doesn't solve the problem.
    What does that mean?
    Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
    If still a problem, restore.
    If still a problem, take it in to Apple for a warranty replacement.
    IMO, you'll probably end up taking it in to Apple but the other steps are worth trying.

  • IPhone 4s call waiting; how do I get back to the first call?

    When I'm on a call and a second call comes in I tap "hold current call and answer." I get connected to the second call and the first call is put on hold. But when I am done with the second call, how do I get back to the first call? I can't find any way to get back to the call that is on hold. I usually end up hanging up on both calls. Not good.
    Also, how do I switch back and forth between two calls? How do I put the second call on hold, go back to the first call to tell that person I must call them back, then return to the second call?

    http://support.apple.com/kb/TA38607?viewlocale=en_US
    Good Luck

  • When receiving an call waiting can't push the hold and answer button.Because: it will put on hold the first caller, answer to the second, but you can't hear the second until you end the first call !!! Anyone has the same problem ? Did anyone know why ?

    When receiving an call waiting can't push the hold and answer button.Because: it will put on hold the first caller, answer to the second, but you can't hear the second until you end the first call !!! Anyone has the same problem ? Did anyone know why ?

    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • Skype Windows client hangs for the first call - co...

    Hi,
    Skype on my Windows 8.1 (depending on its mood) hangs for the first call. It will keep ringing and ringing till it times out, during that time I am not able to hang up the call as well, the red hang up button doesnt work and we have to let the call go on till it drops on its own. Then on the second try it connects perfectly fine. This happens most of the times, there are only a few days where it connects on the first try otherwise its always the 2nd time. 
    Please let me know what could be the possible solution for this one?
    Thanks

    Hi Marcin,
    This forum is mainly for talk about the product use related issue and not the best place to talk about the develop issue, for the develop issue we can post in MSDN forum for
    the further help and your issue may need capture a dump then for the further analysis it is not an efficient way to work in this community since we may need more resources which is not appropriate to handle in the community. I‘d like to suggest that you submit
    a service request to MS Professional tech support service so that a dedicated Support Professional can further assist with this request.
    MSDN forum
    https://social.msdn.microsoft.com/Forums/en-US/home
    Please visit the below link to see the various paid support options that are available to better meet your needs.
    http://support.microsoft.com/default.aspx?id=fh;en-us;offerprophone
    Thanks for your understanding and support.
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • CoCreateInstance returns 0x8007007e (Module could not be found) for the first call only at system startup on Windows 2008 Enterprise SP2

    Hi Guys,
    I'm experiencing a problem with CoCreateInstance, where it returns error 0x8007007e.
    The code is something like this:
    HRESULT hRes = S_OK;
    CComPtr<IMyInterface> spObj;
    if(FAILED(CoInitialize(NULL))) { /* quit */ }while(FAILED(hRes = spObj.CoCreateInstance(CLDIS_MyClass, NULL, CLSCTX_LOCAL_SERVER)))
    // LogFailure(hRes);
    Sleep(10);
    The problems occurs only on a single machine having Windows 2008 Enterprise SP2 installed (it works fine on other machines / OS versions). It happens only during the system startup (this is a Windows Service) and only for the first call of the CoCreateInstance.
    The second call always succeeds.
    The problem does not occurr when starting the service manually from Services.
    I did some investigation using Process Monitor and found that the HKCR\CLSID\[CLSID of MyClass]\LocalServer32!LocalServer32 registry value is accessed before the failure. The registry value exists - it is added by the Windows Installer during
    installation.
    If I remove the registry value then the CoCreateInstance always succeeds.
    I've been trying to lookup for some documentation on HKCR\CLSID\...\LocalServer32!LocalServer32 but haven't found anything useful other than it's a "Windows Installer Entrypoint". I assume that the Windows Installer does some integrity checks when
    calling CoCreateInstance for such class and this fails for some reason but currently I fail to find the reason.
    Can anyone help finding out what's the root cause of the 0x8007007e error here, please? Any help or tip is much appreciated.
    Many thanks!
    Marcin.

    Hi Marcin,
    This forum is mainly for talk about the product use related issue and not the best place to talk about the develop issue, for the develop issue we can post in MSDN forum for
    the further help and your issue may need capture a dump then for the further analysis it is not an efficient way to work in this community since we may need more resources which is not appropriate to handle in the community. I‘d like to suggest that you submit
    a service request to MS Professional tech support service so that a dedicated Support Professional can further assist with this request.
    MSDN forum
    https://social.msdn.microsoft.com/Forums/en-US/home
    Please visit the below link to see the various paid support options that are available to better meet your needs.
    http://support.microsoft.com/default.aspx?id=fh;en-us;offerprophone
    Thanks for your understanding and support.
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Since i update my iPhone 5 with IOS 7.0.2, I start to have serious problems to call or receive calls from other telephones: is not possible to open the call at the first try. Somebody have the same problem?

    Since i update my iPhone 5 with IOS 7.0.2, I start to have serious problems to call or receive calls from other telephones: is not possible to open the call at the first try. Somebody have the same problem?

    Try
    Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data

  • The ATA only rings the first call

    HelloI've just had instaled an ATA Linksys SPA2102 conecting it to a DSL modem CTC UNION model ATU-R130. The SIP is INPHONEX.COM
    My ISP had to redirect some ports to a fixed IP address in order to make the ATA RING.
    I make a call to the number assigned to the ATA and it rings ok the first call (many rings but only the first call).
    After that I make as many calls as I can, but the ATA doesn't detect that a call is going on. Then I must reset the ata with the factory default values and re-enter all the SIP information in order to get the ATA ringing again.The ATA works fine making calls.  The problem is receiving them.Does somebody know what's wrong?
    Thanks
    Juan

    On your next attempt on calling the ATA , try checking the Info page under the Voice tab then look for Hook State, you may want to check first if the ATA disconnected the last call properly. Try checking also if you're using the latest firmware on the unit.

  • My Skype crashes whenever I make the first call/re...

    My Skipe crashes whenever I make the first call or receive the first call. Whether it be by skype to phone or from skype to skype.
    I have to sign out from skype and then sign in again for every call I want to make.
    Solved!
    Go to Solution.
    Attachments:
    DxDiag.zip ‏15 KB

    Please,  run the DirectX diagnostics tool.
    Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
    Be aware that you will have to zip this file before attaching it here.

  • [svn:bz-trunk] 21286: Also need to change 2 more private members to protected in order to make the first call after login

    Revision: 21286
    Revision: 21286
    Author:   [email protected]
    Date:     2011-05-20 11:43:00 -0700 (Fri, 20 May 2011)
    Log Message:
    Also need to change 2 more private members to protected in order to make the first call after login
    Modified Paths:
        blazeds/trunk/apps/ds-console/console/ConsoleManager.as

    Revision: 21286
    Revision: 21286
    Author:   [email protected]
    Date:     2011-05-20 11:43:00 -0700 (Fri, 20 May 2011)
    Log Message:
    Also need to change 2 more private members to protected in order to make the first call after login
    Modified Paths:
        blazeds/trunk/apps/ds-console/console/ConsoleManager.as

  • Skype crashes on the first call

    My skype crashes amd driver in the first call , if it recovers skype works perfectly , if it doesnt recover the whole computer will crash. NOTE: Its only the first call of the day, if my amd driver recovers skype will work perfectly. I need help why does my skype crash?

    Please,  run the DirectX diagnostics tool.
    Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
    Be aware that you will have to zip this file before attaching it here.

  • No navigation but to the first called target

    I have added links to the business partner factsheet with contact person as target.  The first call runs smoothly but afterwards this contact partner will be the only one to be navigated to. 
    Here is the crucial part of the coding:
    lr_nav_descr = cl_crm_ui_descriptor_obj_srv=>create_entity_based(
            ir_entity           = lr_entity
            iv_ui_object_action = if_crm_ui_descriptor_object=>gc_action_display
            iv_component        = 'BP_CONT_MAIN' ).
    lr_navigation = cl_crm_ui_navigation_service=>get_instance( me ).
    if lr_navigation->is_dynamic_nav_supported(
        ir_descriptor_object = lr_nav_descr ) = abap_true.
      lr_col->insert(
        iv_bo    = lr_nav_descr
        iv_index = 1 ).
      raise event history_trigger.
      lr_navigation->navigate_dynamically( lr_col ).
    endif.
    Let me clarify the situation:
    factsheet(Person A) -> Person A // Win!
    factsheet(Person B) -> Person B // Fail!
    lr_entity contains the correct data for navigation.  I suppose that there is something like a navigational cache that has to be cleared. Anyone knows something about this?
    Kind regards
    Roman
    Edited by: romanglass on Oct 28, 2010 11:20 AM Clarification

    Hi Arun,
    this seems to describe exactly my situation and while debugging it seems to attack the right problem. Only thing is that the correction is officially already applied. Coding tells me otherwise ...
    Thank you for your help!
    Kind regards
    Roman
    @sumit This is not the solution, I have already tried. But this was my first guess, too.

  • Is there a way to test for the first calling of a function?

    Hi,
    I created a function (using other functions I created) to
    build a dynamic hierarchy tree menu based on parentID and itemID
    etc etc - I'm sure you're familiar with this concept. It works
    great, and there's no problem there.
    However, I do this all by building it into a string, then
    dumping it on the page. Yet again, this all works fine. However,
    because the function gets called recursively, my class,
    class="tree" gets repeat accross every occurance of the opening UL
    tag.
    I only want this class to be applied to the first UL, but
    because this is recursive, I'm not sure of a way to detect if the
    function is being called for the first time or 5th time, etc. I
    want to say something like:
    <cfif myFunction is being called the first time>
    add the class
    <cfelse>
    don't add the class
    </cfif>
    Please see my code attached. It is fully working. Please
    don't worry about what all the other functions do etc, they are
    working fine, but I need a way or variable to test against.
    Any ideas?
    Many thanks,
    Michael.

    > a dynamic
    > hierarchy tree menu based on parentID and itemID etc etc
    Is it too late to revise the way you are implementing your
    hierarchy? This
    approach is very resource intensive (because you need all
    that recursion),
    and very slow for most operations.
    When dealing with hierarchies, I use the nested set model
    http://en.wikipedia.org/wiki/Nested_set_model).
    Can I recommend you have
    a look, if you have the chance?
    The code is more complicated, but it is really very quick for
    fetches.
    It's slightly slower for create/update/delete operations, but
    for web
    sites, the vast majority of operations are reads.
    Adam

Maybe you are looking for