CME UF6 remote control and Logic studio 8

Hi,
I've tried to configure and use the remote controls of the UF6 keyboard with logic, but they didn't want to work ...
I've tried too with the midi learn, but nothing. In the transport tool, i've seen the midi in when i've pushed the remote keys.
I've not found to choose "play" "stop" "rewind" in the menus of the midi learning tool ...
Someone could help me please to do it ? Does exists a step by step tutorial about this subject ?
The others functions with the midi keyboard works, and i can assign some other controllers.
Thanks you,
Befhti

Hi,
I've tried to configure and use the remote controls of the UF6 keyboard with logic, but they didn't want to work ...
I've tried too with the midi learn, but nothing. In the transport tool, i've seen the midi in when i've pushed the remote keys.
I've not found to choose "play" "stop" "rewind" in the menus of the midi learning tool ...
Someone could help me please to do it ? Does exists a step by step tutorial about this subject ?
The others functions with the midi keyboard works, and i can assign some other controllers.
Thanks you,
Befhti

Similar Messages

  • Remote Control and Remote View Problem

    Hi,
    I work at a High School running Netware 6.0 SP5 and Zen works 4.01 ir7.
    Remote Control and Remote View works great but I noticed one problem.
    We have a logo of the school that is forced down on to the desktop when a
    user logs in through group policies. This logo works perfect for the
    desktop wall paper and loads every time a user logs in.
    When I Remote Control or Remote View a computer the users desktop wall
    paper turns from the logo being forced down through group policies to the
    desktop to a blue desktop wall paper.
    I would prefer the desktop wall paper staying the schools logo when I
    Remote Control or Remote View because if the desktop wall paper changes to
    the blue color I mentioned above when I Remote Control or Remote View the
    users computer, they will know that someone is taking over their computer
    which sometimes we dont want them knowing.
    We have Windows 98SE computer running Novell Client 3.4 and we have some
    computers running Windows XP Professional SP1 and Windows XP Professional
    SP2 both running Novell Client 4.91 SP2.
    The Remote Control and Remote View problem of the desktop wall paper
    changing on the users computer occurs on all operating systems mentioned
    above.
    Is there a solution to my above problem? When Remote Controlling and
    Remote Viewing someone's computer I don't want the desktop wall paper to
    change.
    Thanks!

    Bpilon,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
    - Check all of the other support tools and options available at
    http://support.novell.com.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://support.novell.com/forums)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://support.novell.com/forums/faq_general.html
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • HT4352 How can I get Home Sharing turned on my Apple TV if I have lost my remote control and my remote apps on my ipad and iphone can not get access to my apple tv, only my itunes.

    How can I get Home Sharing turned on my Apple TV if I have lost my remote control and my remote apps on my ipad and iphone can not get access to my apple tv, only my itunes.

    You can't, you will need to get a new remote.

  • Unable to allow remote control and deny transfer files in RM

    Hi, we're running ZCM 11 SP1 and I have a question about assiging rights to non-Helpdesk users for remote control only for user application support. It looks like if I deny transfer files that the button for remote control automatically changes from allow to deny. I couldn't find anything in the forums, KB, or docs to see if this is working as intended or a bug of some sort? If intended, do you know why remote control and transfer files go together, just curious? In ConsoleOne versions of remote management we had always limited non-Helpdesk remote operators and were hoping to do exactly the same with ZCM11. Thanks.

    Originally Posted by spond
    Newellt,
    I can't see why it would be necessary, I suggest you open a Service
    Request and complain!
    Shaun Pond
    Was there ever a workaround for this? I'm seeing the same behavior in 11.2.3 and we have a need to block file transfer but allow remote management.

  • Qosmio X300 - Remote control and function bar for windows seven

    Hi,
    I have bought this PC with Vista x64. I have upgraded it to windows 7 (x64)
    But I didn??t find driver for remote control and function bar. The drivers for Vista *64 don't work.
    Help me plz.
    Thanks for reading
    (Sry for my bad English)

    Hi
    The Win 7 drivers are not available for this unit at this time.
    But I found some Win 7 drivers on the Toshiba US driver page.
    Of course you will not find exactly the same X300 series but you can choose the drives released for Qosmio X305-xxxx
    There is no big difference between X300 and X305 so the Win 7 drivers should work too

  • N8 as remote control and life remote viewer for wi...

    I am going to buy wifi camera. I would like to use my N8 as remote control and life remote viewer.
    Is there any software for N8 Belle ?

    You need to contact the camera manufacturer and ask them if they are releasing an app for the N8 for that purpose. 

  • Wireless remote control and FM transmitter in one?

    Hello.
    Does anbody know if there is a wireless remote control and FM transmitter in one product out yet for the iPod? I am wanting to keep my iPod in the trunk of my GoldWing and control it while I ride transmitting through the FM tuner.
    Other ideas or a combination of products to accomplish this much appreciated!
    thanks
    iPod 80 GB   Windows XP  

    I spent some time (2 hrs) again with the vendor, trying to solve the issue.
    The only result we got is that, when the PC is in suspended status, it can be resumed by pressing "ON" button of the IR Remote Control. That's all.
    My suspect is therefore confirmed: it isn't a hardware issue. It lokks like the IR Remote Controller and the PC can talk eachother, but they speak different languages.
    It is quite a surprise that I couldn't find any information on the use  (Settings? Activation?) of the remote control, nor in the topics of this forum. Really I'm the only one trying to watch TV on the PC? Are there any users of a C540 who can tell me their experience?
    Thank you

  • Remote control and MSI PC-DTV Mega Sky 580

    Hello,
    I bought one of these recently and initially had problems when installed. It would initially run fine but after I closed the program down and restarted it the PC would just reboot.
    I was using the front USB ports so I moved it to the rear ports and removed and reinstalled the drivers/software. It runs just fine now and the quality of the picture superb. I've rerun the device over a few days and all seems okay. I appear to have all the available programs from the Sutton Coldfield transmitter although this morning I booted up and the screen was blank. I realised I had last looked at BBC4 and of course thats only a part time channel!
    I've looked at the MSI site at the drivers/Presto PVR updates but I am not sure which of the four I should download and use. In fact as the device is working is there any advantage in doing this?
    Lastly... I'm not sure if this is a problem or not but the remote control doesn't work. Reading through the forum I'm wondering if I have the wrong end of the stick and the remote only works with Microsofts MCE. I have Microsoft XP SP2. Does the Mega Sky 580 not have a built in IR sensor and am I wasting my time pointing the remote at it and swearing?
    Microsoft XP SP2 with current updates.
    2x300GB
    1GB ram
    Intel D820
    Onboard graphics and sound
    Dust and dog hair arranged attractively around the box!

    Hi,
    Okay I have the bundled Presto PVR software so the unit must be faulty. I thought that the remote control and bundled Presto PVR would only work if installed on a PC where the operating system was Media Centre Edition.
    So the remote control and bundled Presto PVR should work if installed on a PC with Windows XP SP2?
    It looks a bit like I'll have to get a different make. I tried to rescan the channels last night because I was missing UKTV History and now I cannot get BBC1,2,3,4 or radios 3,4,6,7. I get loads of duplicates though like 5 Q's 4 ITV3's. All this on the same aerial I was using yesterday.
    I even tried it with an indoor/attic aerial that works nicely with my other freeview (set-top style not PC) boxes but no matter what I tried I just get the same duplicated list of a few channels. Even tried it with the indoor/attack aerial upside down, back to front! Same list of 63 channels but most duplicated.
    They all work fine but I would prefer a complete set 
    I

  • Remote control and remote desktop client in sccm 2012 ?

    What is the difference between remote control and remote desktop client in sccm 2012 ?

    Remote Control is a built-in feature for SCCM 2012 and uses the RPC protocol. When you use this, the user can still be logged on while helping.
    Remote Desktop is a buit-in feature for Windows and uses the RDP protcol. When you use it, the user will be logged off.
    Why you would use one over the other depends on your requirements.
    Blog: www.danielclasson.com/blog |
    LinkedIn:
    Daniel Classon | Twitter: @danielclasson

  • Problem with remote control and Windows 7 - HP Pavilion 6301eu

    I installed Windows 7 32-bit and my remote control does not work. I have tried all possible drivers and still nothing ... Photo driver attached. Does anyone have a link to the current drivers for the remote control and Windows 7? thank you

    Hi John:
    Thanks but, I had already done this. I was having THAT problem with Encore (could not even initialize before tanking) when I first installed it and that's when I updated the Roxio engine. I don't know what else there is to update or correct at this point.
    There was one thing that occurred to me: When I was using XP, I had to disable Open GL in order to get Encore to stabilize. I've heard one recommendation for Encore that one must disable graphics acceleration. I would like try that here except I can't figure out how to do that in Windows 7.
    I've been Googling "Windows 7 Disable Graphics Accel" and have come up with nothing useful.
    Thanks for your help though and if you have any other ideas, I'm all ears.
    Mark

  • Apogee ensemble and logic studio

    I got a new apple desktop pro quad 2.66 and Logic Studio.
    I have been using a Motu 828mk11 and logic 7 pro.
    I was considering using the Apogee Ensemble and was wondering if anyone using Studio has any luck with Ensemble and if they think the switch would be worth the investment.
    I also Use an API A2D preamp with the digital outs.....any news on how that might work with Ensemble?
    anyway, just a note, if anyone cares, the UAD Nevana X2 works really tightly with Logic Studio and its WORTH the purchase price. amazing.

    Respiro wrote:
    saved through it as wavs?
    If you use outboard gear for mix and processing i.e you route out your Software Instruments thru some of the Apogee outputs (analog/optical or digital), process them using some external analog or DSP processors and route back the processed sound to the Apogee Inputs ( i.e Logic Mix track ), then the mix may be different, rather than the Logic native Bounce.
    If you use Logic bounce, then Apogee is just a monitoring device as was mentioned before. I agree if you have several devices and play same (previously) bounced Logic audio file thru the different devices they may sound different - this the test the audio engineers make in the laboratories.
    Personally I own several devices and I prefer to use one for final mix monitoring (which is most "true" not "sweet or pumped"), some for recording, other for internal DSP processing, depends on the situation...
    !http://img59.imageshack.us/img59/4967/aglogo45.gif!

  • Need help with my Toshiba remote control and receiver for Qosmio G30 161

    Hello to all
    I have a Toshiba Qosmio G30-161 and with it I have a Toshiba remote control and a Toshiba remote control receiver, this is the first time I have used it (tried to that is), my problem is the remote is not working on the computer when I press any program buttons the computer does nothing.
    I have installed four brand new AA batteries and the remote works fine its sending signals to the receiver, the receiver the detecting the remote as a red light appears every time you press a button and as for the computer I have checked the drivers and the USB is picking up the receiver as a E-home remote receiver which I have checked with Toshiba and that is correct, so all in all the remote is working, the receiver is picking up signals and the pc has detected the receiver but nothing works, I have installed remote control manager but this still has done anything. I have spoken to Toshiba help and support and the end result is they are not sure what the problem is. Can anyone help I require the remote for slideshows for customers as I??m a photographer.
    Also to confirm I am running Windows XP MCE addition.
    Anthony Worlock

    Hi there,
    this remote contol works, if you use it without any special drivers and special software, only in the Media Center.
    But if you install such stuff like [WinLirc|winlirc.sourceforge.net] then you should be able to get some functions for your presentation.
    Please try this tool and check if it works.
    By the way: If I were you I would first read the Manual and FAQ of WinLirc before starting because its a little bit tricky to handle the program. :) (Too many settings :D)
    Greets

  • Novation 47SL MKII and Logic Studio

    I use a Novation 47MKII midi controller and I keep getting this error when going into Logic Studio 9 after working in Live 8. Any ideas why this would happen?
    “Device “HUI” is assigned to MIDI Port “Automap HUI” which is not present.
    Please ensure that all MIDI interfaces are connected and switched on. If this is the case, please check the MIDI port setting of device “HUI”. If this is correct, click “Reset All MIDI Drivers” in Preferences > MIDI > General."

    I have the same issue with my ReMOTE ZeRO SL and have not been able to figure out how to have it keep the configuration. The setup guide works fine, but it doesn't maintain the MIDI configuration and I need to re-enter the environment settings each time I setup the system.

  • Final Cut and Logic Studio

    I have a MacBook with:
    Processor-2.1 GHz Intel Core Duo
    Memory-1 GB 667 MHz DDR2 SDRAM
    Question: A) Can I run Final Cut Studio 2 and/or Logic Studio
    B) If not, will a timecapsule or mimi mac give me the power needed?

    First of all, you'd need to install more RAM to run either program. Both programs require a MINIMUM of 1gb of RAM, so if you run either program, there'd be no RAM available for the OS or any background processes. So yes, it would slow your computer down to a crawl ... if not a crash.
    There is no way to connect any Firewire device to the new MacBooks. So no FW control surfaces for Logic Studio and no way to connect a tape based camcorder or FW hard drive for external storage.
    Motion and Color probably wouldn't even install due to the weak graphics card and shared RAM.
    Also, keep in mind that Apple officially doesn't support FCS on the MacBook at all. Essentially, the MacBook is not designed for editing. But hey ... it's your money.
    -DH

  • MIDI Remote Control in Logic 8?

    In Logic Pro 7 it was easy to assign transport and other functions to keys on any MIDI keyboard, and there was a menu command and a "MIDI remote" checkbox that allowed this function to be turned off and on. Does Logic Pro 8 retain this same functionality? I haven't read the entire Logic Pro 8 user manual, but a search through the pdf doesn't turn up any comparable reference to "MIDI remote." The manual does talk about assigning key commands to control surfaces -- will this allow me to teach Logic to execute my favorite key command when I play a C#0 on any old MIDI keyboard, as in Logic 7? The ability to turn this "MIDI remote" function on and off -- in case I want to play a C#0 and not control the transport -- was also nice. Does that exist in Logic 8? (Basically, I just want to control Logic's transport when I'm recording into a mike, in a sound booth 20 feet away from my main Mac/Logic workstation -- and a little 25-key midi keyboard did that job nicely via MIDI remote in Logic 7.)

    Hi, I saw this question while looking for something else, and noticed it hasn't been answered. I don't think the macbook air has an ir receiver, which is why you probably dont see it. Have you tried obtaining the boot camp drivers? you can go to boot camp setup in OSX, and after the initial walkthrough there is an option for saving the "windows support" utilities to a flash drive. save then take it into Windows, and reinstall boot camp drivers if you havent already. Otherwise I don't think macbook air laptops have a reciever to see an apple remote with. Sorry.  Alternatively, if you have an iphone, ipad, or ipod touch, there are remote apps in the app store to remotely control your laptop. I believe there is one which mimicks an actual apple remote. good luck.

Maybe you are looking for