CME With CUE

Hey All ,
i have integrated My CME with CUE , i have two phone with extension 1000,2000 and all phones have mailbox,,
i make basic IVR that will forward the call to 1000 if 2000 is busy , but the case is when the 2000 is busy the forwarded call go to the mailbox
Not to 1000 .
how i can make the call go to 1000 NOT to the voice mail ??
but at the same time if any one is call the 1000 OR 2000 direct and the extension is busy will go the mail box.
please help Me...
Best Regards,
Ahmad Kefaya

thanks for pointing

Similar Messages

Schedule with CUE

Hi,
i've met an issue with CUE 3.0.2. the system don't care with the bizschedule (open and close hours).
i've an aa which check the bizschedule.closed hour doesn't match. everytime the takes open hours.
Any help?
Thanks

Thanks for your help
yes the clock and timezone is correct.
i resolve this issue. I've noticed that the parameter "parameter "systemschedule" was null. this parameter is not saved through CUE GUI on my aa appplication with cmd 'sh run" in service engine interface. I write this manually on cli and everything is ok.
It's possible to Dev Team to check if everything saved on gui is write on memory of CUE
Thanks
This problem not occur on CUE 2.X only 3.x
Many thanks

Streaming Video with Cue Points

I have made a video with cue points, when it is in a local
file, lingo can check its cuepointtime and cuepointnames as well,
but when it is put in streaming server, its cuepointtime and
cuepointnames are both empty when get by lingo.
Could anyone please tell how to get the cue points of a video
when getting it from streaming server?
Linda

you're welcome.
for anyone else with a similar issue, using the info property of the MetadataEvent is the correct way to proceed. (that event has no object property.)

CME WITH JABBER

Hi All,
I would like to know if it is possible to have CME with Jabber. Our customer asks for IM and Presence in a ToIP solution with no more than 70 Users.
I Appreciate your Comments,
regards
GCA

No, you need CUCM and CUPS/IM&P
Software Requirements
http://www.cisco.com/en/US/partner/docs/voice_ip_comm/jabber/Windows/9_0_1/b_jabber_win_icg_chapter_01000.html#JABW_RF_SEF029A0_00
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk

Importing wav with cue points?

I’m trying to import a WAV file with cue points and I
get a “Director having trouble importing…” error
message. I created the cue points in Sound Forge 9 using markers
and save the file with meta data. From what I recall I should be
able to simply import this file but Director (MX04) seems to be
choking on the meta data (imports fine without cue points).
I’ve been working with Director for over 10 years but lately
it’s been mostly application development and not narrated
multimedia, I feel like I’ve forgotten something very
basic.

Fixed it, sort of… Apparently by default Sound Forge
doesn’t name the cue points at all and Director doesn’t
like this (at least up to MX04, don’t know about 11). To
create wav files with metadata that Director will read:
In Sound Forge navigate to Options > Preferences >
Labels.
Check the box “label markers”, I also used the
prefix and leading zero options
Any new markers will now have labels
For my present project I already had 83 cue points accurately
positioned that I didn’t want to remake. In this case I
renamed each cue point by hand, one at a time. Insanely tedious but
better than marking the file again.

CME with Microsoft Lync/Mediation server Integration

Hello
please, we want to integrate our Cisco CME with microsoft Lyn/Mediation Server.
Please, what do i need to configure on the Cisco CME?
Thanks

I have config on cme side. But not Lync side(
sip-ua
no remote-party-id
voice service voip
allow-connections sip to sip
no supplementary-service sip handle-replaces
sip
bind control source-interface gi0/0 (this should be your sip interface, creating loopback and binding to SIP is best practice)
bind media source-interface gi0/0 (this should be your sip interface, creating loopback and binding to SIP is best practice)
voice class codec 20
codec preference 1 g711alaw
codec preference 2 g711ulaw
codec preference 3 g729r8
dial-peer voice 11 voip (Incoming dial-peer from Lync)
b2bua
session protocol sipv2
session target ipv4:LyncIP
session transport tcp
incoming called-number .%
voice-class codec 20
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
no vad
dial-peer voice 21 voip (outgoing dial-peer to Lync)
destination-pattern 1... (this is Lync patterns dial-peer)
notify redirect ip2pots
session protocol sipv2
session target ipv4:LyncIP
session transport tcp
voice-class codec 20
dtmf-relay rtp-nte
fax rate disable
fax protocol pass-through g711ulaw
no vad

CME with Unity Express GUI Java problem

Running IOS 12.4(22)T with CME 7.0(1) and CUE 7.1.5 on a 2821 ISR.
The GUI had been working fine after the initial system install (used it provision phones). Got back into the system to add another phone and when clicking on either Configure->Extensions, Configure->Users or Configure->System Parameters we get the following text in the browser (IE, Firefox doesn't matter):
var maxButtonMode = 10 var ringTypeName=new Array(maxButtonMode) ringTypeName[0]= "Normal Ring" ringTypeName[1]= "Silent" ringTypeName[2]= "Silent w/CW Beep" ringTypeName[3]= "Feature Ring" ringTypeName[4]= "Monitor" ringTypeName[5]= "Overlay" //ringTypeName[6]= "Expand" //ringTypeName[7]= "Overlay w/CW" //ringTypeName[8]= "Speed Dial" ringTypeName[9]= "Watch" document.write("<" + "SCRIPT LANGUAGE='JavaScript' SRC='admin_user.js'><" + "/SCRIPT>");
The other pages load up fine. Same behaviour from Windows 7 32-bit or inside a Windows XP SP3 VM environment. Two different versions of Java running: 1.6.0_17 and 1.6.0_20.
Thanks for your help, ideas or suggestions.
Jason

Ended up taking these steps to fix the gui issue:
Reloaded the integrated CUE module service module no effect;
Reloaded the router - no effect;
Upgraded to IOS 12.4(24)T3 and extracted cme-gui-124-24T.tar to flash (had been using files from cme-gui-7.1.0.0.tar).
Working fine now.

Cme with Voicemail.

How does one intergrate voicemail with Cme,i have an office with a 2811 router with a number of ip phones.It has FXO/FXs ports and is working ok,i now want voicemail,how do i go about this?
Thanks.

Your best solution will be Cisco Unity Express voice mail system.
You'll need an NM slot available to put a NM-CUE module into.
(or you can go with an AIM-CUE module which will connect to the 2811 motherboard)
Please see the following links for more info about Cisco Unity Express voice mail:
CUE Introduction:
http://www.cisco.com/en/US/products/sw/voicesw/ps5520/tsd_products_support_series_home.html
CUE 3.1:
http://www.cisco.com/en/US/docs/voice_ip_comm/unity_exp/rel3_1/release/notes/rncue31.html
CUE Compatibility Matrix:
http://www.cisco.com/en/US/docs/voice_ip_comm/unity_exp/compatibility/cuecomp.htm

Automatic outgoing calls with CUE?

Hello,
is it possible to make automatic outgoing calls with a CUE?
That is, can we give X numbers to the CUE and let him place X automatic calls, with a prerecorded message (for example, for a telemarketing campaign)?
Thanks and regards.

Hello,
I think to have solved by myself, by the command "Place Call" of the CUE Editor.
Regards.

Stopping streaming video with cue points

I've been searching for a solution to this problem for weeks now. All i want to do is make a video streaming in a video object to stop on a cue point, and play from abother when a button is pushed. It's relatively simple, right? Wrong. Over a hundred $s in how-to books and several hours wasted searching online later and I have nothing. I have checked and re-checked the cuepoints are correct (i made them in flash video encoder CS3) and tried just about everything as far as AS is concerned. Here is my latest attempt: (obmintro is the player instance name, i have the rtmp info in source under player parameters and it plays fine)
import fl.video.MetadataEvent;
obmintro.addEventListener(MetadataEvent.CUE_POINT, cp_listener);
function cp_listener(eventObject:Object):void
if (eventObject.object.name == "site_end");
obmintro.pause();
//i have also used stop, stop("obmintro"); and i don't even know what else.
please tell me what i'm doing wrong and how it's really supposed to be done. i'm feeling very hopeless and blonde right now. help a girl out?

you're welcome.
for anyone else with a similar issue, using the info property of the MetadataEvent is the correct way to proceed. (that event has no object property.)

Building CME with SIP vs. SCCP Phones

We currently have 4 CME Systems with SCCP phones. Recently, it was discuss by our upper management to start using SIP phones. Right now the system I have configured are using a PRI for dialtone with POTS lines for backup. What needs to different on the config to use SIP? Do I replace the 'telephony-service' and current 'dial-peers' or add to them?
This is all new to me and I still have not been able to attend any formal training.
Would there ever be a reason to use SIP and SCCP phones on the same system and would that even work?
Any help is appreciated!

Aha.... that's a different question.
The choice of your trunking protocol (PRI versus SIP versus something else like FXO/analogue) is largely independent of the protocol the handsets use. You can use SCCP for your handsets and then use SIP trunking into a provider for your external calls. The CME Router will handle the signalling translation between SCCP and SIP for you.
Like everyone else here, I would always use SCCP for the handsets. Whilst Cisco are improving SIP handset features all the time between releases you still can't do everything you that you can do with SCCP. You would also need version 15 to support some of the more useful SIP handset stuff including Extension Mobility, and my own personal view of the code quality on the version 15 trains would use such language that it can't be mentioned here.
SCCP to the handset and trunking over SIP is perfectly valid and I've used it many times with great success.
Hope this helps. Barry

Exporting FLV With Cue Points In Adobe Premiere Pro CS5

Hello
I am currently using Adobe Premiere Pro CS5 to export to a FLV file with flash cue points. I have managed to do this but I also want to export (separately) a list of all the time codes of the cue points in the clip. I see that you can save the cue points to an xml file but it doesn't come up with the time codes (well it does, but it is in milliseconds and amongst other things). Is there any way I can save a list of the time codes of the cue points on my FLV file, rather than having to manually type it out?
Thanks,
Rvnistelrooy

I don't think there is any easy way to do this, but one thing I could suggest is to export the metadata as an xml side car and then use the text editor to extract the times. I'm not sure this would work, but it's worth a try.
Cheers,
Dennis

Problem with cue point from After Effects to Flash (CS5.5)

Hello,
anyone has, or has not problems reading, in Falsh, cue points included with After Effects? (Navigartion cue points).
It is possible export from Flash movie in .flv format? (Both versione CS5.5).
Thank you.

No I don't believe it's the footage, as I've been able to transfer the same files on my school computer and use it with ease.It's just any type of footage, if I attempt to drag any of my imported files (whether they're images of any kind or .mp4, .mov, .wav, .mp3) just as I would click and hold the file, my cursor turns into the Mac loading ball. Perhaps is there something these programs require such as Java? I'm not sure if it's related, but I've also not been able to play some games via Steam that I have been able to play in the past with the same system.

How to config CME with FXS card for analog phones

I want to config FXS cards in CME router with SCCP protocol for transfer, pickup ... feature. I can find information about the sccp (the command about stcapp), but I can not find the information about how to config CME, e.g. the phone no.(something like ephone-dn .... )
Can anyone help me ? or send me the link
Thx
Dennis

Thx Johncaston,
Your config is for H323, it doesn't support features, something like transfer funtion .......
I have found the config for SCCP, let's share my finding
====================
ephone-dn 178
number 9933
description Board Room
name Board Room
hold-alert 30 originator
ephone-dn 179 dual-line
number 9990
description Meeting Room 3
name Meeting Room 3
hold-alert 30 originator
ephone 95
mac-address 9556.60FA.0200
type anl
button 1:178
ephone 96
mac-address 9556.60FA.0201
type anl
button 1:179
GigabitEthernet0/0 is up, line protocol is up
Hardware is MV96340 Ethernet, address is 0019.5566.0fa0 (bia 0019.5566.0fa0)
================================
stcapp ccm-group 1
stcapp
sccp local GigabitEthernet0/0
sccp ccm 172.16.136.125 identifier 1
sccp
sccp ccm group 1
associate ccm 1 priority 1
signaling dscp af31
audio dscp ef
voice-port 1/0/0
cptone HK
caller-id enable
voice-port 1/0/1
cptone HK
caller-id enable
dial-peer voice 21 pots
service stcapp
port 1/0/0
dial-peer voice 22 pots
service stcapp
port 1/0/1
=========================
Thanks !!
Dennis

Need Help with Cue Points/Custome Code

So I've figured out that videos with a playback component need cue points in order to set up all the interactivity I want to use. The only way to make animated graphics, interactive graphs and text is to apparently create custom code, which I no zip about.
Should I hire someone to do that for me? I was thinking elance, but does anyone have any suggestions on how to make an interactive video other ways (or cheaper)ways.
p.s
how much do you think I should charge for that:)?

My advice... start with a very simple "proof of concept" project before you attempt the entire package.
It will be much easier to scale up if you first have a very good understanding of what's going on.
So one simple video with just one cuepoint and only one button and additional display. You'll also have to work out the interaction of pausing the video when a cuepoint is reached or button pushed to display the graph, giving the viewer time to read the graph... then when the viewer closes the graph, the video should "resume".
Start very simple and build on that only after you understand the fundamentals.
Second, you mention "video reports"... plural. So that most likely means that you will need a video player with a "playlist".
This may mean that you'll need to learn to use a little .xml to bring in the playlist data. You may also find xml an excellant way to bring other data into you project.
At the link listed above there is an excellant tutorial on "Integrating Flash and XML"
"Flash and XML"
"XML Video Playlist"
"ActionScript 3 XML Basics"
"ActionScript 3 Advanced XML"
Personally I would not even begin a project like this without considering how I could use xml to feed data into the project.
Here's an example of a video player I created that has a playlist, thumbnails, categories, transcipts, "Now Playing" etc. All that data comes into the main .swf via various xml files. Super good way in input data into Flash.
http://www.drheimer.com/video/
Yours is a rather ambitious project and will take awhile to gain the skill and assemble the pieces. So when you come to a new part... first create a real simple "proof of concept" model so you can learn how that section works. Don't expect to be able to assemble the entire project all at once.
Best wishes,
Adninjastrator

CME With CUE

Similar Messages

Maybe you are looking for