CMPControlManager::PublishInDNS: DnsReplaceRecordsInSet() failed with status 9005 in MPControl.log and MP is showing in critical state

CMPControlManager::PublishInDNS: DnsReplaceRecordsInSet() failed with status 9005 error message in mpcontrol.log and management point showing critical state in Monitoring-Site status
Please help to resolve the same.

Based on this thread ---> http://social.technet.microsoft.com/Forums/systemcenter/en-US/f66a8f0f-31df-49b1-b385-450c522aac0f/cmpcontrolmanagerpublishindns-dnsreplacerecordsinset-failed-with-status-9005-getting-this?forum=configmgrinventory
a possible workaround is:
1. Start DNS
2. Navigate to following DNS SRV record: _mssms_mp_<SMS_SiteCode>._tcp.AD_FQDN
3. Right click on this record; and add all MP Machines Account and provide Full Control permissions on this DNS SRV Record.
4. Restart "SMS_EXECUTIVE" service on all MPs
You will then see that each MP will successfully register each DNS SRV records successfully.

Similar Messages

Windows Server 2008 SP2 randomly reboots due to lsass.exe failed with status code 255

Hello,
Any help on this issue would be greatly appreciated. I have an older Windows Server 2008 SP2 (I don't believe it is R2) (running SQL Server 2008 and SSRS 2008 on the machine) that is crashing randomly
during business hours. Looking into the event logs, I have found the following:
Faulting application lsass.exe, version 6.0.6002.18541, time stamp 0x4ec3ca01, faulting module msvcrt.dll, version 7.0.6002.18551, time stamp 0x4ee8d118, exception code 0xc0000005, fault offset 0x00000000000011ad, process id 0x284, application start
time 0x01d066d9669a3e1c.
A critical system process, C:\Windows\system32\lsass.exe, failed with status code 255. The machine must now be restarted.
The process wininit.exe has initiated the restart of computer RIDEDB02 on behalf of user for the following reason: No title for this reason could be found
Reason Code: 0x50006
Shutdown Type: restart
Comment: The system process 'C:\Windows\system32\lsass.exe' terminated unexpectedly with status code 255. The system will now shut down and restart.
I found a Hot Fix for a similar issue (https://support.microsoft.com/en-us/kb/2732595?wa=wsignin1.0), but it appeared to only be applicable to Windows Server 2008 R2 and Windows 7.
A few hours later, the crash happened again, with a slightly different error:
The system process 'C:\Windows\system32\lsass.exe' terminated unexpectedly with status code -1073741819. The system will now shut down and restart.
Faulting application lsass.exe, version 6.0.6002.18541, time stamp 0x4ec3ca01, faulting module msvcrt.dll, version 7.0.6002.18551, time stamp 0x4ee8d118, exception code 0xc0000005, fault offset 0x00000000000011ad, process id 0x284, application start
time 0x01d066fa9d74c5d7.
A critical system process, C:\Windows\system32\lsass.exe, failed with status code c0000005. The machine must now be restarted.
The security package Kerberos generated an exception. The exception information is the data
I have been unable to find a reason for these exceptions and the server rebooting. Any thoughts or ideas on how I can correct this error so it doesn't reboot our server again? .
Thank you,
Ben

Hello,
Any help on this issue would be greatly appreciated. I have an older Windows Server 2008 SP2 (I don't believe it is R2) (running SQL Server 2008 and SSRS 2008 on the machine) that is crashing randomly
during business hours. Looking into the event logs, I have found the following:
Faulting application lsass.exe, version 6.0.6002.18541, time stamp 0x4ec3ca01, faulting module msvcrt.dll, version 7.0.6002.18551, time stamp 0x4ee8d118, exception code 0xc0000005, fault offset 0x00000000000011ad, process id 0x284, application start
time 0x01d066d9669a3e1c.
A critical system process, C:\Windows\system32\lsass.exe, failed with status code 255. The machine must now be restarted.
The process wininit.exe has initiated the restart of computer RIDEDB02 on behalf of user for the following reason: No title for this reason could be found
Reason Code: 0x50006
Shutdown Type: restart
Comment: The system process 'C:\Windows\system32\lsass.exe' terminated unexpectedly with status code 255. The system will now shut down and restart.
I found a Hot Fix for a similar issue (https://support.microsoft.com/en-us/kb/2732595?wa=wsignin1.0), but it appeared to only be applicable to Windows Server 2008 R2 and Windows 7.
A few hours later, the crash happened again, with a slightly different error:
The system process 'C:\Windows\system32\lsass.exe' terminated unexpectedly with status code -1073741819. The system will now shut down and restart.
Faulting application lsass.exe, version 6.0.6002.18541, time stamp 0x4ec3ca01, faulting module msvcrt.dll, version 7.0.6002.18551, time stamp 0x4ee8d118, exception code 0xc0000005, fault offset 0x00000000000011ad, process id 0x284, application start
time 0x01d066fa9d74c5d7.
A critical system process, C:\Windows\system32\lsass.exe, failed with status code c0000005. The machine must now be restarted.
The security package Kerberos generated an exception. The exception information is the data
I have been unable to find a reason for these exceptions and the server rebooting. Any thoughts or ideas on how I can correct this error so it doesn't reboot our server again? .
Thank you,
Ben

Function module ZBAPI_DELV_HU_DETAILS is failing with status TARGET_METHOD_

Hi,
Function module ZBAPI_DELV_HU_DETAILS is failing with status TARGET_METHOD_EXCEPTION external server. What could be the reason for this?
This Function Module will be called within program ZMWXO011. This program will be configured in the output determination for HU's. It will be triggered whenever a relevant HU is created. The BAPI will extract Delivery & HU level data that is required by Exacta & Scan code and send to a predefined TRFC Queue.
Thanks & Regards,
Srinivas Reddy.

Hi Efren,
Go to transaction ST22 and check for any dump.
The work item is in process, so there will be a dump in the system.
The Function module parameters could be a problem.
ST22 transaction will give you details about the dump.
Thanks,
Viji.

Sharepoint 2013 webDAV PROPPATCH fails with status code 409 error every time when trying to set custom property.

Sharepoint 2013 webDAV PROPPATCH fails with status code 409 error every time, when trying to set custom property.
anyone have any idea

Hi
Stumbled upon the resolution myself. The Bean Area item needs to be set to Visible=Yes in the property palette for the bean within Forms Builder, and also the implementation class also in the bean's properties must match exactly the package & class name specified in the PJC (my full implementation class string had to be set to oracle.forms.demos.runApplication).
As this bean has no user interface component, and since the Visible property has to be set to Yes, to avoid having a random square shape for the bean sitting on the form's canvas, I also set the Width and Height properties for the bean to 0.001. This does show a very small dot on the form, but that will be acceptable.
So in summary there has been a change for PJC / Bean Areas between 6i and 10g Forms, in 6i you could have the Bean Item to be set Visible=No, and the SET_CUSTOM_ PROPERTY built-in would work, however in 10g Forms the Bean Item must be set to Visible=Yes for the SET_CUSTOM_PROPERTY built-in to work.
Daryl

Profile Manager: Service has failed with status 500?

I am getting a "Service has failed with status 500" error when trying to enroll a device with profile manager. Does anyone have a resolution for this?

In OS X Server 2.1.1 there seems to be an error, according to: https://discussions.apple.com/thread/4365626?start=0&tstart=0

I purchased a file that advised it works with Illustrator intalled via extension manager and it only shows in my 'others products'? I cant even open the file in illustrator or in design? Help =)

I purchased a file that advised it works with Illustrator intalled via extension manager and it only shows in my 'others products'? I cant even open the file in illustrator or in design? Help =)

What's the product name please?

Idoc failed with status 51 for Warning/Information messages

Hi All,
We are trying to create some Sales Orders with the help of Idocs. We are facing some problem as mentioned below.
1.There are some warning messages/information messages written in standard Sales Order User Exit USEREXIT_SAVE_DOCUMENT_PREPARE
2.As soon as the Idoc processing reaches any of these messages, it considers them as ERROR message and Idoc fails with the status as 51 which is not expected.
3.Also, I see that the Sales Order is saved with the data that has been passed in the Idoc.
Is this the standard behavior ?? (Or) Is there any EDI related configuration setting which can be used to suppress these kind of messages in Idoc Processing ??
Any help on this would be highly appreciated.
Thanks,
Babu Kilari

if your IDOC has status 51 then it is not posted, hence your sales order cannot be created from this IDOC. of course this error behaviour can be originated by the user exit.
please read OSS note Note 747631 - Some tips when testing idoc_input_orders

Failed with status 400 creating new room.

Hi,
I am using the server API to create a new room, but I fail with a response code of 400. Can you tell me what I am doing wrong?
I'm using the sample Java server integration code to do this.
Thanks.

Hi Raff,
Here are the logs when I set Utils.DEBUG = true;
http_get: http://connectnow.acrobat.com/xoomxo?mode=xml&accountonly=true&
Redirecting to https://na2.connectnow.acrobat.com/xoomxo?mode=xml&accountonly=true&
http_get: https://na2.connectnow.acrobat.com/xoomxo?mode=xml&accountonly=true&
Content-Type: text/xml;charset=UTF-8
Content-Length: 177
http_post: https://services.acrobat.com/account/wsapi/auth/v1 <request><username>[email protected]</username><password>bizzybaz1</password></request>
{Content-Type=text/xml}
Content-Type: text/xml;charset=UTF-8
Content-Length: 127
http_get: https://na2.connectnow.acrobat.com:443/xoomxo?mode=xml&accountonly=true&gak=cmVuZ2EqbmExci oxMjcwYzUwMDgyMipFQ1E5WjdHMkpENUE1NDlLUFpDUVA4UU1OUg==
Content-Type: text/xml;charset=UTF-8
Content-Length: 323
http_post: https://na2.connectnow.acrobat.com:443/xoomxo mode=xml&room=xoomxoroom2.15_Room&template=dateroomtemplate&gak=cmVuZ2EqbmExcioxMjcwYzUwM DgyMipFQ1E5WjdHMkpENUE1NDlLUFpDUVA4UU1OUg==
HTTP error 400
Does this show what might be causing the error?
Thanks,
Barry

Client install fails with Error 0x87d00280 on ccmsetup log file

CAS and Primary Server are on Server 2012 R2, Clients are Win 7 and Server 2008 R2 in
same Domain. Primary Server has DP and MP installed, I can successfully install client from my Primary Server through Client Push Installation. I don't see any errors on SCCM Console.
On the client side I can see C:\Windows\ccmsetup\ccmsetup.exe is installed and the "ccmsetup"
Service is not in running status.
When I checked the ccmsetup log file, the latest error message says - Have already tried all
MPs, Couldn't find DP locations. Also another line says - The Certificate Selection Criteria was not specified. There are no Certificates in "MY" store.
Do I need to install self signed Certificate through MMC snap-ins, DNS issue or I am missing
something, Please help!
Angur J Patel

is your MP set to https ? seems like its certificates issue. You can go through the documentation
https://technet.microsoft.com/en-us/library/gg682023.aspx? on how to setup PKI in sccm 2012 to check if you have created certificates as needed .
this might help you http://jackstromberg.com/2014/09/system-center-2012-r2-configuration-manager-ccmsetup-failed-with-error-code-0x87d00280/
Eswar Koneti | Configmgr Blog: www.eskonr.com | Linkedin: Eswar Koneti
| Twitter: eskonr

Remote desktop fails, can still connect to event log and services.

I am unable for some reason to remote into a machine that I've been able to before. This occurred after it installed automatic updates. At the moment I can connect to
services and the event log from another machine with the same credentials, but I can't log onto the machine itself. Is there any way to reset this info or such. This machine is a part of a domain and can read credentials from the domain controller.
I also do know that remote desktop is enabled.
The following error occurs in the even log on the affected machine.
Log Name:      Security
Source:        Microsoft-Windows-Security-Auditing
Date:          2013-03-21 10:28:23 AM
Event ID:      5061
Task Category: System Integrity
Level:         Information
Keywords:      Audit Failure
User:          N/A
Computer:      ****
Description:
Cryptographic operation.
Subject:
   Security ID:       SYSTEM
   Account Name:        ****$
   Account Domain:        *******
   Logon ID:       0x3e7
Cryptographic Parameters:
   Provider Name:   Microsoft Software Key Storage Provider
   Algorithm Name:   RSA
   Key Name:   TSSecKeySet1
   Key Type:   Machine key.
Cryptographic Operation:
   Operation:   Decrypt.
   Return Code:   0xc000000d
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Security-Auditing" Guid="{54849625-5478-4994-A5BA-3E3B0328C30D}" />
    <EventID>5061</EventID>
    <Version>0</Version>
    <Level>0</Level>
    <Task>12290</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8010000000000000</Keywords>
    <TimeCreated SystemTime="2013-03-21T14:28:23.339874500Z" />
    <EventRecordID>937125</EventRecordID>
    <Correlation />
    <Execution ProcessID="500" ThreadID="548" />
    <Channel>Security</Channel>
    <Computer>**********</Computer>
    <Security />
</System>
<EventData>
    <Data Name="SubjectUserSid">S-1-5-18</Data>
    <Data Name="SubjectUserName">*******$</Data>
    <Data Name="SubjectDomainName">********</Data>
    <Data Name="SubjectLogonId">0x3e7</Data>
    <Data Name="ProviderName">Microsoft Software Key Storage Provider</Data>
    <Data Name="AlgorithmName">RSA</Data>
    <Data Name="KeyName">TSSecKeySet1</Data>
    <Data Name="KeyType">%%2499</Data>
    <Data Name="Operation">%%2484</Data>
    <Data Name="ReturnCode">0xc000000d</Data>
</EventData>
</Event>

Hi,
The following methods could be used to resolve some of the most common problems.
Potential issues that may be seen:
1.) Remote Desktop endpoint is missing
Each virtual machine that is created should have a remote desktop endpoint for the VM at port 3389. If this endpoint is deleted then a new endpoint must be created. The public port can be any available port number. The private port (the port on the VM) must
be 3389.
2.) RDP fails with error: "The specified user name does not exist. Verify the username and try logging in again. If the problem continues, contact your system administrator or technical support."
RDP connection may fail when there are cached credentials. Please see the following article to resolve this problem:
http://www.c-sharpcorner.com/uploadfile/ae35ca/windows-azure-fixing-reconnect-remote-desktop-error-the-specified-user-name-does-not-exist-verif/
3.) Failure to connect to uploaded VHD
When a VHD is uploaded to Windows Azure you must make sure that Remote Desktop is enabled on the VHD and an apporopriate firewall rule is enabled on the VM to open port 3389 (Remote Desktop port).
Hope this helps!
Regards.
Vivian Wang
TechNet Community Support

Operations Manager Failed to Access the Windows Event Log and management server is showing warning state

Hi,
I am monitoring AD server from SCOM 2012 R2. My management server goes into waning state. When i run Health explorer then it come back in the healthy state but after some time it again goes into warning state. After seeing alert i found that a alert is coming
again and again i.e. Operations Manager Failed to Access the Windows Event Log.The description of alert is mention below
The Windows Event Log Provider is still unable to open the DhcpAdminEvents event log on computer 'nc2vws12ad5.corp.nathcorp.com'.
The Provider has been unable to open the DhcpAdminEvents event log for 64080 seconds.
Most recent error details: The RPC server is unavailable.
Please suggest me how to resolve this so that my management server will again come back in healthy state.
Thanks
Abhishek

Hi Abhishek,
As i mentioned earlier the Alert resolution says the same points.
Can you give details on the below ?
Is there really a log named "Dhcpadminevents" in the MS's Event viewer ?
Did you recently configure any new alert where you mentioned "Dhcpadminevents"
as a event log location ?
If yes then what is the target you selected for the rule / monitor there ?
Can you post the results for analysis ?
Gautam.75801

IDOC Posting To XI Failed With Status Text "::000" in SM58

Hello Gurus
Can u please suggest me how to overcome the problem with Custom Idocs while trying to send from SAP R/3 to SAP PI(XI).
The status text is displaying as "::000" with no other details, in SM58 of the sender system i.e. SAP R/3.
The Idocs status in the sender system is showing as 03 with the message "Idoc sent to sap system" in transaction BD87.
So I am getting confused where I missed the configuration.
Please suggest how I can troubleshoot the above.
<<Text removed>>
Regards,
Rk.K
Thanks in advance .
Edited by: Matt on Jun 24, 2011 9:58 AM

Thanks a lot for your support.
I have tried all the suggested solutions......but my problem was not solved.
The Metadata should be automatically created when the IDOCS successfully received by the XI server.
If it is not created then we should clear the SLD Cache in XI and try to create a new Metadata by giving the Custom IDOC Name and Port.
Even I tried with a Standard Idoc ORDERS05 , but I failed to do so.
After doing the above step I am getting the Information pop-up message "I::000".
Regarding RFC, I have created 2 users in both the systems with the same name(ALEREMOTE) of type "System".But,I am unable to Remote Login from XI to R/3 whereas the vice -versa is successful.
Are there any chances for this being the reason for failure of Idoc processing?
Such information message"I::000" is completely inexplainable.
Kindly, suggest a solution for it.
Thanks.

Metachain failed with status 'X'.

Hi experts,
I have an issue with the meta chain which has been canceled with the status 'X'.And some of the local process chains are not getting triggered.
Please help me.
Regards
Sam

Hi Sam,
Could you please explain your issue in detail. At what step your process chain got failed.
open the chain in RSPC1 --> goto logs view ---> right click on step which got failed --> select display messages
here check the log, you will find the error or post the log here.
You told you local chain have not triggered, is the above step got completed. make sure your local chains start condition is immediate.
check you have enough back ground processes in SM50 and SM51.
Regards,
Venkatesh.

CREATE PDF fails with ALC-PDG-null-Generic Log Message java.lang.OutOfMemoryError

Adobe LiveCycle PDF Generator ES (Version: 8.2.1)
The CREATE PDF service fails. It does not convert word documents to PDF. It used to work earlier. We haven't changed any configuration. The Server.log has the below entries:
2014-01-07 10:18:49,536 INFO [com.adobe.pdfg.GeneratePDFImpl] ALC-PDG-001-000-
Job ID for the submitted createPDF job =BXU004275.docx911bb3-b13cac-ba31d8-1e253f-c932e7-fa2bf0
2014-01-07 10:18:52,176 INFO [com.adobe.pdfg.BMCCaller] ALC-PDG-001-024-BXU004275.docx: Time Job Submitted: 1/7/14 10:18 AM
2014-01-07 10:18:52,458 INFO [com.adobe.pdfg.BMCCaller] ALC-PDG-001-021-BXU004275.docx: PDF Settings Used: pdfg Standard 55865
2014-01-07 10:18:52,458 INFO [com.adobe.pdfg.BMCCaller] ALC-PDG-001-022-BXU004275.docx: Security Settings Used: No Security
2014-01-07 10:18:52,458 INFO [com.adobe.pdfg.BMCCaller] ALC-PDG-001-023-BXU004275.docx: FileType Settings Used: Standard
2014-01-07 10:18:52,458 INFO [com.adobe.pdfg.BMCCaller] ALC-PDG-001-017-BXU004275.docx: Job Submitted by User: administrator
2014-01-07 10:18:52,536 INFO [com.adobe.service.ProcessResource] BMC505: Service PDFMakerSvc: Starting native process with command line "C:\\Adobe\\LiveCycle8.2\\jboss\\server\\all\\svcnative\\PDFMakerSvc\\bin\\dll\\pdfgen.ex e" PDF-PD1936a0002 -beginExecutable "C:\\Java\\jdk1.5.0_14\\jre\\bin\\javaw.exe" -endExecutable -Xmx64m -cp "C:/Adobe/LiveCycle8.2/jboss/server/all/svcnative/PDFMakerSvc/bin/adobe-appmon.jar;C:/Ado be/LiveCycle8.2/jboss/server/all/svcnative/PDFMakerSvc/bin/adobe-appmondata.jar;C:/Adobe/L iveCycle8.2/jboss/server/all/svcnative/PDFMakerSvc/bin/adobe-bslj.jar;C:/Adobe/LiveCycle8. 2/jboss/server/all/svcnative/PDFMakerSvc/bin/adobe-csa.jar;C:/Adobe/LiveCycle8.2/jboss/ser ver/all/svcnative/PDFMakerSvc/bin/adobe-generatepdf-client.jar;C:/Adobe/LiveCycle8.2/jboss /server/all/svcnative/PDFMakerSvc/bin/adobe-pdfg-common-jaxb.jar;C:/Adobe/LiveCycle8.2/jbo ss/server/all/svcnative/PDFMakerSvc/bin/adobe-pdfg-common.jar;C:/Adobe/LiveCycle8.2/jboss/ server/all/svcnative/PDFMakerSvc/bin/adobe-pdfg-commonbmc.jar;C:/Adobe/LiveCycle8.2/jboss/ server/all/svcnative/PDFMakerSvc/bin/adobe-pdfg-idl-bmc-websphere.jar;C:/Adobe/LiveCycle8. 2/jboss/server/all/svcnative/PDFMakerSvc/bin/adobe-pdfg-idl-bmc.jar;C:/Adobe/LiveCycle8.2/ jboss/server/all/svcnative/PDFMakerSvc/bin/adobe-utilities.jar;C:/Adobe/LiveCycle8.2/jboss /server/all/svcnative/PDFMakerSvc/bin/avalon-framework-4.1.5.jar;C:/Adobe/LiveCycle8.2/jbo ss/server/all/svcnative/PDFMakerSvc/bin/comfyj-2.4.jar;C:/Adobe/LiveCycle8.2/jboss/server/ all/svcnative/PDFMakerSvc/bin/jacorb.jar;C:/Adobe/LiveCycle8.2/jboss/server/all/svcnative/ PDFMakerSvc/bin/jaxb-api.jar;C:/Adobe/LiveCycle8.2/jboss/server/all/svcnative/PDFMakerSvc/ bin/jaxb-impl.jar;C:/Adobe/LiveCycle8.2/jboss/server/all/svcnative/PDFMakerSvc/bin/jaxb-li bs.jar;C:/Adobe/LiveCycle8.2/jboss/server/all/svcnative/PDFMakerSvc/bin/jniw2.9.5_acrobat1 .1.jar;C:/Adobe/LiveCycle8.2/jboss/server/all/svcnative/PDFMakerSvc/bin/jniw2.9.5_autocad1 .1.jar;C:/Adobe/LiveCycle8.2/jboss/server/all/svcnative/PDFMakerSvc/bin/jniw2.9.5_autocad2 007.jar;C:/Adobe/LiveCycle8.2/jboss/server/all/svcnative/PDFMakerSvc/bin/jniw2.9.5_excel1. 3.jar;C:/Adobe/LiveCycle8.2/jboss/server/all/svcnative/PDFMakerSvc/bin/jniw2.9.5_pdfmapi1. 0.jar;C:/Adobe/LiveCycle8.2/jboss/server/all/svcnative/PDFMakerSvc/bin/jniw2.9.5_ppt2.6.ja r;C:/Adobe/LiveCycle8.2/jboss/server/all/svcnative/PDFMakerSvc/bin/jniw2.9.5_project4.4.ja r;C:/Adobe/LiveCycle8.2/jboss/server/all/svcnative/PDFMakerSvc/bin/jniw2.9.5_publisher1.0. jar;C:/Adobe/LiveCycle8.2/jboss/server/all/svcnative/PDFMakerSvc/bin/jniw2.9.5_visio4.a.ja r;C:/Adobe/LiveCycle8.2/jboss/server/all/svcnative/PDFMakerSvc/bin/jniw2.9.5_word8.1.jar;C :/Adobe/LiveCycle8.2/jboss/server/all/svcnative/PDFMakerSvc/bin/jniwrap-3.6.1.jar;C:/Adobe /LiveCycle8.2/jboss/server/all/svcnative/PDFMakerSvc/bin/logkit-1.2.jar;C:/Adobe/LiveCycle 8.2/jboss/server/all/svcnative/PDFMakerSvc/bin/namespace.jar;C:/Adobe/LiveCycle8.2/jboss/s erver/all/svcnative/PDFMakerSvc/bin/PDFMakerConverterServer.jar;C:/Adobe/LiveCycle8.2/jbos s/server/all/svcnative/PDFMakerSvc/bin/winpack-3.6.jar;C:/Adobe/LiveCycle8.2/jboss/server/ all/svcnative/ServicesNatives2/jars/adobe-bslj.jar" com.adobe.native2pdf.bmc.PDFMakerServer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ppServer jboss
2014-01-07 10:18:52,567 INFO [STDOUT] Command line '"C:\Java\jdk1.5.0_14\jre\bin\javaw.exe"'
2014-01-07 10:18:52,770 INFO [STDOUT] [configuration loaded from classpath resource jar:file:/C:/Adobe/LiveCycle8.2/jboss/server/all/svcnative/PDFMakerSvc/bin/adobe-pdfg-com monbmc.jar!/jacorb.properties]
2014-01-07 10:18:53,942 INFO [com.adobe.native2pdf.bmc.WordToPDFConverter] ALC-PDG-001-001-Begin processing job : C:\Documents and Settings\infodba\Local Settings\Temp\pdfg-infodba\6f\40a5-a1cb14-9618a9-a39550-d1e383-217845\native-in.docx
2014-01-07 10:19:04,925 INFO [com.adobe.pdfg.BMCCaller] ALC-PDG-001-016-BXU004275.docx: Job Type: Convert to PDF
2014-01-07 10:19:04,940 INFO [com.adobe.pdfg.BMCCaller] ALC-PDG-001-027-BXU004275.docx: Job Completion Status: Succeeded
2014-01-07 10:19:04,940 INFO [com.adobe.pdfg.BMCCaller] ALC-PDG-001-025-BXU004275.docx: Time Job Completed: 1/7/14 10:19 AM
2014-01-07 10:19:04,940 INFO [com.adobe.pdfg.BMCCaller] ALC-PDG-001-026-BXU004275.docx: Time of Job Execution: 12,764 ms
2014-01-07 10:19:04,940 INFO [com.adobe.aes.web.create.CreatePDFAct] ALC-PDG-001-018-BXU004275.docx: User Connected from Host: 10.2.113.168/10.2.113.168
2014-01-07 10:19:04,940 INFO [com.adobe.aes.web.create.CreatePDFAct] ALC-PDG-001-029-BXU004275.docx: Job Source: Admin UI
2014-01-07 10:19:05,018 ERROR [com.adobe.aes.web.create.CreatePDFAct] ALC-PDG-null-Generic Log Message
java.lang.OutOfMemoryError
at java.io.FileInputStream.readBytes(Native Method)
at java.io.FileInputStream.read(FileInputStream.java:194)
at com.adobe.idp.Document.passivateInitData(Document.java:1219)
at com.adobe.idp.Document.passivate(Document.java:1055)
at com.adobe.idp.Document.passivate(Document.java:1012)
at com.adobe.idp.Document.getInputStream(Document.java:1524)
at com.adobe.idp.Document.copyToFile(Document.java:1623)
at com.adobe.aes.web.create.CreatePDFAct.execute(CreatePDFAct.java:192)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:431)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:236)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1196)
at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:432)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
at com.adobe.aes.web.AesActionServlet.service(AesActionServlet.java:63)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:810)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.j ava:252)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at com.adobe.idp.um.auth.filter.AuthenticationFilter.doFilter(AuthenticationFilter.java:154)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.j ava:202)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:81)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.j ava:202)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
at org.jboss.web.tomcat.security.CustomPrincipalValve.invoke(CustomPrincipalValve.java:39)
at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.ja va:159)
at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:59)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:856)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11P rotocol.java:744)
at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
at org.apache.tomcat.util.net.MasterSlaveWorkerThread.run(MasterSlaveWorkerThread.java:112)
at java.lang.Thread.run(Thread.java:595)

Thanks guys for the response..
I checked the IR and the SAP Basis has been added. Here are the details I got.
Name: SAP_BASIS
Version: 700
SWCV: SAP BASIS 7.00
Available Support Packages: 12
Any more suggesions/feedback will be greatly appreciated.
Thanks

CR 2010 msi (32 bit) runtime fails with error 1904, win 8.1 and many dll's not registered

I searched the KB articles on 1904 error, but nothing for win 8 and few for vb 2010 msi. windows platform.
I had been using cr 2008 32-bit runtime with no problem. But now I am trying to install an application that was created in vb 2010 and I need the cr 2010 runtime. I started to install the cr 2010 runtime 32 bit. This is a 64 bit machine but the application was created for 32 bit and I have been using 32 bit when installing msi on other x64 platforms with no problems.. This was a test machine. It has installed the visual C++ redistributable x86 and 64 bit , versions 2005, 2008, 2010 and 2012. bit. The cr 2010 32 bit runtime is the one that fails.
During installation of the CR 2010 msi a message said that the 2008 msi had to be uninstalled which it did automatically. But later I received the error 1904 message. There are about 21 dll's that were listed as not registering.
I uninstalled the cr 2008 32 bit runtime and tried again, but that did not help.
I tried running the CR 2010 msi as administrator to no avail.
I tried uninstalling all other crystal -related software and updates to no avail.
I tried disabling windows defender, to no avail.
My OS platform is Windows 8.1

Hi Suzanne
Something does not sound right; The CRVS MSI should not have required an uninstall of CR 2008 runtime as these are side by side compatible...
Re. Information on CRVS and WIN 8.1, see this KBA:
2012075 - Installing Crystal Reports for Visual Studio 2013 SP 9 - 1904 error - Failed to register a SAP component - HRESULT -2147010895 or HRESULT: 0x80073715
Now, irrespective of the above KBA which discusses MS VC++ dependency, the CRVS MSI contains the C++ runtime so it is quite confusing as to why the issue. Note that the MSM files do not install the C++ dependencies due to MS licensing restrictions.
There is 10 different CRVS MSI files - one for each Service Pack. Which one are you using? Can you provide the link you used to download the MSI?
Is this computer some special OEM edition? Surface Pro?
Have a look at this KBA:
1611044 - How to enable Windows Installer Logging on Crystal Reports MSI files?
See if the logs tell you anything.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

CMPControlManager::PublishInDNS: DnsReplaceRecordsInSet() failed with status 9005 in MPControl.log and MP is showing in critical state

Similar Messages

Maybe you are looking for