CMS gets hang when configure TACACS
Hi
I have stack of 2950 switches. I have configure tacacs for login security purpose. but i am facing problem when i open CMS web interface. I am succussfully get authenticated. but its get hang when Discovering network information dialog box comes. If you close that session and reopen again then CMS working fine. Problem is that when I configure Network Access restriction group device for specific user. Then it halt at Discovering Network information. I am using Cisco ACS 3.0. Following my switch config.
aaa new-model
aaa authentication login default group tacacs+ local
aaa authentication enable default group tacacs+ enable
aaa authorization exec default group tacacs+ if-authenticated
aaa authorization commands 1 default group tacacs+ if-authenticated
aaa authorization commands 15 default group tacacs+ if-authenticated.
The only problem is CMS application getting hang with tacacs configuration . My IOS ver is 12.1(14)EA1A. Please help its very urgent.
I could not find any bugs related to the issue you are describing. There was one problem where the username/password prompt was appearing again and again which had to do with misconfigurations. Do let me know if you find a solution.
Similar Messages
-
Adobe Connect gets hanged when enabling/disabling audio
Hi everyone!
My name is Dani and I'm from Spain.
We've just started using Adobe Connect but we are facing an unknown issue. (Art least, it's unknown for me )
I start a meeting as a host, then 2 or 3 people connect to it as guests, and then, everytime I enable or disable my own audio (through the direct icon) the entire platform gets hanged for 2 or 3 seconds. Very annoying!
We are using the adobe connect add-in in a computer with that configuration:
- Dell Optiplex 760
- Windows 7 x64
- 8 GB RAM
- Microsoft LifeCam HD
- ATI radeon graphic card (256MB)
- A DSL dedicated simetric line
Your help would be appreciated!!
Thanks in advance!!Hi everyone!
My name is Dani and I'm from Spain.
We've just started using Adobe Connect but we are facing an unknown issue. (Art least, it's unknown for me )
I start a meeting as a host, then 2 or 3 people connect to it as guests, and then, everytime I enable or disable my own audio (through the direct icon) the entire platform gets hanged for 2 or 3 seconds. Very annoying!
We are using the adobe connect add-in in a computer with that configuration:
- Dell Optiplex 760
- Windows 7 x64
- 8 GB RAM
- Microsoft LifeCam HD
- ATI radeon graphic card (256MB)
- A DSL dedicated simetric line
Your help would be appreciated!!
Thanks in advance!! -
Integration Directory is getting hanged when trying to do some changes
Hello All,
Ours is PRD XI 3.0 env...and when we try to do any changes(editing , activating , rejecting the changes) it gets hangs up with out throwing any error.
At the same time other java tools(IR,RWB,SLD) are properly accessible .
Some points to be taken into notice:
1>Even we tried to do a CACHE refresh SXI_CACHE , which is success with out any problems.
2>After entering into ID , when trying to do "clear SLD cache " also it gets hangup.
Can any one help us to fix this issue.
Best Regards
Rakeshtry the following;
1. close IR/ID.
2. open java web start
3. Preferences -> advanced -> clear folder
then try to open IR and ID.
this should do the trick
else;
XI start page -> Administration -> Java Web Start Administration -> Re-initialization -
Report6i is getting hanged when i am using truncate command in srw.do_sql
Hi All,
I am using Reports 6.0.8.18.0 and oracle 9.2.0.1 on Windows XP with SP1.
I am having a report in which i have used "truncate table <tablename>" command using SRW.do_sql command. some times report is getting hanged and some times it is giving an error as given below
18:26:52 ERR REP-1425: 'afterpform': Error running DO_SQL package - 'Error parsing the SQL statement.
ORA-04021: timeout occurred while waiting to lock object <object name >
When i checked with the Oracle 8.1.7 database it is working fine.
is there any patches are requried at database side ?
Can any body help me in this.
Regards,
GouriFirst: you should get a new keyboard. Seems your shift-key is stuck.
Second: A header of a post is a header and not for a summary of your question
Third: This is the forum for the tool SQL Developer. Please mark this question as answered and post again in Forms
Forth: When you expect an answer, the least would be to include the errormessage and your forms version.
Regards
Marcus -
Planning getting hanged when i change a member hierarchy
Hi,
When i try to change the hierarchy of a member by cutting and pasting it or through outlineload.cmd, planning is getting hanged. I get java heap space error. We have set the intial and max heap size in the registry as
1. Initial heap size = -Xms1024m
2. Max heap size = -Xmx1024m
Even the planning service is not responding. And planning web is not even opening now.
There is another entry in the registry named JVMOption10 = -Xss256k.
What has to be done?
Regards,
Ragav.
Edited by: ragavhere on Mar 25, 2011 6:52 PM
Edited by: ragavhere on Mar 25, 2011 7:01 PMHi John,
There was workflow enabled for a particular scenario. I've cleared it. Now i am able to delete. Thanks a lot.
But otherwise when workflow is enabled and if i have to change the hierarchy, how is this scenario managed? Is this the only way?
Regards,
Ragav. -
Session gets hanged when breakpoint is set, else works properly.
Hello Experts,
I am expierencing that when i activate the breakpoints in my source code, my sessions gets hanged up.But when i remove the same breakpoint , i get to see the output. I have all the rights , and i use to debug till this last week.
Can anyone help me in this issue.
Thanks in advance.
SwapnilHi, Waghmare
Please Check your GUI version and Patch Level i think problem is with your GUI
Follow Steps Bellow
--> Press ALT + F12
--> From the menu Select About from here you can Check the Version and Patch Level
Regards,
Faisal
Edited by: Faisal Altaf on Feb 1, 2010 3:12 PM -
Bex query is getting hanged, when trying to drill down only for one hierarchy node.
Hi All,
We have a bex query, in which we have multiple nodes. And we are able to expand almost all nodes except one hierarchy node called "BD1".
when we trying expand the BD1 node, the report is executing on and on and getting hanged up.
In RSRT the read mode is "H"
The report is based on a multiprovider and it has 7 cubes of which 6 of them have aggregates.
The characteristic for which we have issue is also having BWA.
So, I am not sure why the issue is with only 1 node in the entire report. Can someone let me know the possible reasons and solutions.Hi Shilpa,
The only way to show long text is to maintain only long text for the info object. Otherwise system always defaults to short text.
Jaya. -
When i click on any link to download a file ( software, document etc.) using idm , the firefox get hang for sometime till the download dialogue box don't come. any solution to this problem.??
Try to start Firefox in [[Safe mode|Safe mode]]. This mode disables all extensions, user customizations, hardware acceleration, etc. temporarily for diagnostic and troubleshooting. If Firefox works find in Safe Mode, then this is likely an add-on issue. Restart Firefox in normal mode, then type "About:addons" (without the quotes) in the address bar. Disable your extensions one by one, restarting Firefox between each one, until you find the trouble maker. Once you do, you can disable that add-on and report the issue to that add-on's developer.
A few other basic trouble shooting things you can try is this:
Run all Windows Updates, install all needed service packs, etc.
Update your graphics driver (Firefox uses your graphics card for some rendering, and an out of date graphics card driver can cause problems. [https://support.mozilla.org/en-US/kb/how-do-i-upgrade-my-graphics-drivers https://support.mozilla.org/en-US/kb/how-do-i-upgrade-my-graphics-drivers].
Update all your plugins (Flash, Java, etc.): [http://www.mozilla.org/plugincheck/ http://www.mozilla.org/plugincheck/].
Download and Install MalwareBytes Anti-Malware, run a full Scan. [http://www.malwarebytes.org/ http://www.malwarebytes.org/]. This helps check that there are no viruses on your computer causing issues. You can uninstall this program after you clean off any infections. -
MY MAC BOOK GET HANG WHEN I SHUT DOWN IT WHAT IS THE REASON?????
MY MAC BOOK (PRO) GET HAND WHEN I SHUT DOWN IT.
WHAT COULD BE THE REASON ????The OS is Mac OS X 10.6.8 (10K549) if I am right at this time (I am not good with the the IT stuff).
BTW: I have copied the software information below for best answer;
System Software Overview:
System Version: Mac OS X 10.6.8 (10K549)
Kernel Version: Darwin 10.8.0
Boot Volume: Macintosh HD
Boot Mode: Normal
Computer Name: Abu Baker Stanekzai’s MacBook Pro
User Name: Abu Baker Stanekzai (abubakerstanekzai)
Secure Virtual Memory: Enabled
64-bit Kernel and Extensions: Yes
Time since boot: 12 minutes
Tx in advance -
I-tunes gets hanged when connecting i-pad to 64 Bits Windows 7
Hi,
I have both new I-Pad and I-Phone, but none of these appears in my i-tunes. In fact i-tunes get hanged and i can't perform any action. This issue i only face with 64 Bits Windows 7.
I request help in this regard.1. plug in IPAD
2. go to start
3. search bar type in: devmgmt.msc
4. open: portable devices
5. right click: apple Ipad, hit unistall
6. then hit reinstall
you should see in bottom tool bar your device being reinstalled.
open itunes.
If that doesn't work. Make sure you go in iTunes > Edit > Preferences > Devices and make sure to check: Prevent iPads, iPods, and iPhones from syncing automatically.
Then try to connect again -
Getting error when configured sender mail adapter
Hi Everyone,
When i tried configuring sender mail adapter am getting these logs in Runtime workbench.
In ID,when i gave ip address in place of URL, am getting this log
"exception caught during processing mail message; java.io.IOException: unexpected password response; read -ERR Logon failure: unknown user name or bad password."
When i gave URL in place of URL, am getting this log
"exception caught during processing mail message; java.net.UnknownHostException:"
why is it giving this log, What correction i have to do to make it work.
Thanks in advance,
SakthiHi,
<i>1.How to stop deleting mails.</i>
When the IMAP4 protocol is used, we get an option "Delete messages when read".You could specify if you need to delete it or not.
<i>2.How to do mapping for an attachment,what additional things i have to do for this.</i>
Could you please elaborate?
<i>3.Is there any option to change the flag of mail once it is read by XI.</i>
You cannot do this from XI. You would need to do it in your email client. In case you are using IMAP4,you could mark the message as read, once XI reads the unread message.
Regards,
Smitha. -
Jobs gets hanged when a call is made to PLSQL function in Data Services XI
Hi,
I am facing the below issue after migration of BODI 11.7 to BODS XI 3.1.
The job is not proceeding after the below mentioned statements.
print('before call');
$is_job_enable=DS_TEST.TEST.MY_PKG.IS_JOB_ENABLED(job_name());
print($is_job_enable);
MY_PKG.IS_JOB_ENABLED plsql function will return Number.
$is_job_enable is a global variable declared as decimal (10, 0).
This Job works fine in Data Integrator 11.7.3 version and gets handed in Data Services XI 3.1.
I tried changing the global variable $is_job_enable to int and created new data sources before doesn't solve the problem. Can anyone tell me what is the issue?
Thanks & Regards
Maran MK
The trace file says
5260 3284 JOB 5/5/2009 4:43:17 AM Job <TEST_JOB> is started.
5260 3284 PRINTFN 5/5/2009 4:43:17 AM before call
5260 3284 SP 5/5/2009 4:43:18 AM Stored procedure call <MY_PKG.IS_JOB_ENABLED> is started.
5260 3284 SP 5/5/2009 4:43:18 AM SQL query submitted for stored procedure call <MY_PKG.IS_JOB_ENABLED> is: <BEGIN :AL_SP_RETURN :=
5260 3284 SP 5/5/2009 4:43:18 AM "TEST"."MY_PKG"."IS_JOB_ENABLED"("P_JOB_NAME" => :P_JOB_NAME); END;
5260 3284 SP 5/5/2009 4:43:18 AM >.
5260 3284 SP 5/5/2009 4:43:18 AM Stored procedure call <E> input parameter <P> has value of <TEST_JOB>.
5260 3284 SP 5/5/2009 4:43:18 AM Stored procedure call <E> return value is <1.0000000>.
5260 3284 SP 5/5/2009 4:43:18 AM Stored procedure call <MY_PKG.IS_JOB_ENABLED> is done.
The below error occurs only in Windows and not in Linux environment.
5260 3284 SYS-170101 5/5/2009 4:43:21 AM |Session TEST_JOB
5260 3284 SYS-170101 5/5/2009 4:43:21 AM System Exception <ACCESS_VIOLATION> occurred. Process dump is written to <E:\Program Files\Business Objects\Data
5260 3284 SYS-170101 5/5/2009 4:43:21 AM Services\log\BODI_MINI20090505044318_5260.DMP> and <E:\Program Files\Business Objects\Data
5260 3284 SYS-170101 5/5/2009 4:43:21 AM Services\log\BODI_FULL20090505044318_5260.DMP>
5260 3284 SYS-170101 5/5/2009 4:43:21 AM Process dump is written to <E:\Program Files\Business Objects\Data Services\log\BODI_MINI20090505044318_5260.DMP> and
5260 3284 SYS-170101 5/5/2009 4:43:21 AM <E:\Program Files\Business Objects\Data Services\log\BODI_FULL20090505044318_5260.DMP>
5260 3284 SYS-170101 5/5/2009 4:43:21 AM Call stack:
5260 3284 SYS-170101 5/5/2009 4:43:21 AM 001B:00CA9EAB, ActaDecimalImpl<RWFixedDecimal<RWMultiPrecisionInt<3> >,RWMultiPrecisionInt<3>,ActaDecimal28,char
5260 3284 SYS-170101 5/5/2009 4:43:21 AM [29]>::operator=()0315 byte(s), x:\src\rww\actadecimalimpl.cpp, line 13140004 byte(s)
5260 3284 SYS-170101 5/5/2009 4:43:21 AM 001B:00D8A267, Convert()+0999 byte(s), x:\src\eval\calc.cpp, line 0303
5260 3284 SYS-170101 5/5/2009 4:43:21 AM 001B:00DBF9E0, XVal_cast::compute()+0272 byte(s), x:\src\core\compute.cpp, line 1664
5260 3284 SYS-170101 5/5/2009 4:43:21 AM 001B:00DBC239, XStep_assn::execute()+0057 byte(s), x:\src\core\step.cpp, line 0069
5260 3284 SYS-170101 5/5/2009 4:43:21 AM 001B:00DBB30D, XStep_sblock::execute()+0029 byte(s), x:\src\core\step.cpp, line 0707
5260 3284 SYS-170101 5/5/2009 4:43:21 AM 001B:00DBB30D, XStep_sblock::execute()+0029 byte(s), x:\src\core\step.cpp, line 0707
5260 3284 SYS-170101 5/5/2009 4:43:21 AM 001B:00DBE0BC, XPlan_spec::execute()+0348 byte(s), x:\src\core\plan.cpp, line 0082
5260 3284 SYS-170101 5/5/2009 4:43:21 AM 001B:00DC5EA0, XPlan_desc::execute()+0336 byte(s), x:\src\core\xplan.cpp, line 0153
5260 3284 SYS-170101 5/5/2009 4:43:21 AM 001B:00DBD68E, XPlan_spec::compute()0206 byte(s), x:\src\core\plan.cpp, line 01450011 byte(s)
5260 3284 SYS-170101 5/5/2009 4:43:21 AM 001B:00DBD891, XPlan_spec::compute()+0225 byte(s), x:\src\core\plan.cpp, line 0244
5260 3284 SYS-170101 5/5/2009 4:43:21 AM 001B:0074533A, AE_Main_Process_Options()+31498 byte(s), x:\src\xterniface\actamainexp.cpp, line 3485
5260 3284 SYS-170101 5/5/2009 4:43:21 AM 001B:00747EDA, AE_Main()1498 byte(s), x:\src\xterniface\actamainexp.cpp, line 07680030 byte(s)
5260 3284 SYS-170101 5/5/2009 4:43:21 AM 001B:004029F9
5260 3284 SYS-170101 5/5/2009 4:43:21 AM Registers:
5260 3284 SYS-170101 5/5/2009 4:43:21 AM EAX=0000000E EBX=03E392E0 ECX=04B455A0 EDX=012346D8 ESI=02B75D88
5260 3284 SYS-170101 5/5/2009 4:43:21 AM EDI=04B455A0 EBP=00212738 ESP=002124BC EIP=00CA9EAB FLG=00210206
5260 3284 SYS-170101 5/5/2009 4:43:21 AM CS=001B DS=0023 SS=0023 ES=0023 FS=003B GS=0000
5260 3284 SYS-170101 5/5/2009 4:43:21 AM Exception code: C0000005 ACCESS_VIOLATION
5260 3284 SYS-170101 5/5/2009 4:43:21 AM Fault address: 00CA9EAB 01:00585EAB E:\Program Files\Business Objects\Data Services\bin\acta.dllHi Manoj & Tiji,
Thanks for your comments. Please find the below outcome.
print($is_job_enable); -- is not executed if PLSQL function is called.
I changed $is_job_enable to VARCHAR, still the same issue.
I created new project and executed the same in new job, still the same issue (all objects are new except Datastore).
The dmp happens only when we the PLSQL function is called. I commented the Function call, the execution proceeds further but got hanged in other PLSQL function call (different than the 1st one)
Is this bug in 12.1?
Can you tell any Hot fix available? If possible please give me the SAP Notes Number.
Is there any other way to execute the PLSQL functions/procedures in 12.1?
Thanks
Maran MK -
SWING GUI is getting hangged when ever i send a server call
Hi,
Can any one help me
Using swings im making a server call i.e. to EJBs
When ever im sending a server call GUI is getting hanggedFrom your description it sounds like you are running some lenghty task on the event-dispatching thread. That will manifest itself as a hanging GUI. You can read more about it here:
http://java.sun.com/docs/books/tutorial/uiswing/misc/threads.html -
Snow Leopard Client hangs when configuring services
I have an xserve with Mac Os X Server v10.6 setup at a remote site, and a VPN-connection (gateway-to-gateway) to our office.
When trying to connect my clients to the server the following happens (my clients are in swedish, so excuse any translation faults)...
1. I go to "System Preferences"-"Log In", press "Connect" by Network Account Server.
2. I type the hostname of my server (xserve01.mydomain.com), and it tells me that this server offers "calendar, email and addressbook" services.
3. I push ok, and and then push "configure services". The progressbar quickly runs through, until it reaches the far right, the status bar says "configuring software".
4. Now finder freesez, I cant do anything on the client. I left if for 1-hour, and still nothing.
How do I debug what is going on here, I tried locking through the server logs, but can't realy find anything that seems wrong.
I do see that the home-folder has syncronized with the server, so it appears I am connected.
Any ideas? Where should I look for what is going on?
What I am missing out on here?, is it ok to set everything up manually on the clients?
I would like it to configure I-cal, so that the group-calenders shows up. Will it if I get it to succeed?
Message was edited by: ronnie_asHello and thanks for the thought.
Client B and Client A have the same network setup - both connect via ethernet to a managed gigabit switch (Netgear for what its worth) - the server is connected to the same switch.
Funny thing is - Client B (the problem one) seemed to perk up again after running disk utility / repair disk+permissions on the Snow Leopard install disc... all good for a few hours.
But - recently started connecting slowly again to the server! After moving the test folder back and forth successfully 2 hours ago, then returning to normal work, I noticed the same server -saving sluggishness as before, even when saving small (4-5Mb) illustrator files back to the server.
Bit of a strange problem, as it seems isolated to one client thus far. Our client machines running 10.5 are fine with Snow Leopard server.
** One thing that I have a sneaky suspicion might be causing trouble - as the migration is still being done from old system to new system, my Carbon-copy-cloned system disk with a Leopard install is still occasionally being accessed from an external drive as I copy files over from it on occasion...
I am going to try disk permissions and then NOT attaching the mirrored system drive for a while and see what happens then...
x -
After Update with 10.8.2. The System get hang (stuck)
I had to do a forced restart, several time and even a ReBoot in safety more.
AND I FIGURED OUT WHY :
I realized that in one of my folder (Download) I had an ".exe" File; Than have been downloaded (because i got Parallel Desktop that neable window7 to run under the Mac), and causes the problem (system is hanged)
Then when I reboot in safety mode I deleted that file. And Then everything went OK.
But when I plugged my USB key, I got again my system that turn to stop... Then again Force to Restart, remove the USB Key.
Guess what!! In the USB Key (at the root) there was again some '.exe' Files...
In conclusion :
There is an issue with that new release of Mountain Lion 10.8.2 that cause the system to get hang, when "Finder" meet an '.exe' file.
It occurs only when you open your "Finder" then go throughout some folder where you have placed some '.exe' file. Then your system will not respond anymore. You got to force the restart
Just to make it clear, of course I do not want to run an '.exe' file under Mac.
But If like me you have Parallel Desktop in order to run Window7 or 8; you might have some '.exe' file that are located in your Mac Folder…..
Then, when you open 'Finder' and you walk through your folder and meet an '.exe' file, thus you system will freeze!!
Work Arround Solution, that's only happen if your '.exe' File is not associtaed to be open under Window Explorer (if you have Parallel Desktop, of course).
Then, make sure to associate the extension '.exe' to Window Explorer, if you have some '.exe' File that are located in your folder or USB key,
Otherwise your system will freeze and you will have to force the restart.
CheersThat right I do not need to have any .exe file in my Mac environment; but having
installed Parallel Desktop (to have a Window Environment, due to business matters)
you might have from time to time some of that files ins download area or in the USB key.
The Test I made is very simple : I placed an .exe file in an USB Key; then plug in to my Mac
then from Finder open the folder where was that exe file…. Guess what ???
My computer get FREEZE (no respond)… I got to reboot.
Then I do not know what's going on. With the previous version (10.8.1) I never got such of issue ?
Here is the log beofre I had to restart:
2012-09-21 12:16:19 +0200 Finder[141]: *** WARNING: Method userSpaceScaleFactor in class NSWindow is deprecated on 10.7 and later. It should not be used in new applications. Use convertRectToBacking: instead.
2012-09-21 12:16:19 +0200 Finder[141]: *** WARNING: Method userSpaceScaleFactor in class NSView is deprecated on 10.7 and later. It should not be used in new applications. Use convertRectToBacking: instead.
2012-09-21 12:16:20 +0200 SystemUIServer[140]: *** WARNING: Method convertRectToBase: in class NSView is deprecated on 10.7 and later. It should not be used in new applications.
2012-09-21 12:16:20 +0200 SystemUIServer[140]: *** WARNING: Method convertRectFromBase: in class NSView is deprecated on 10.7 and later. It should not be used in new applications.
2012-09-21 12:16:20 +0200 SystemUIServer[140]: *** WARNING: -[NSImage compositeToPoint:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
2012-09-21 12:16:20 +0200 SystemUIServer[140]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
2012-09-21 12:16:20 +0200 com.apple.SecurityServer[17]: Session 100003 created
2012-09-21 12:16:21 +0200 awacsd[66]: Exiting
2012-09-21 12:16:25 +0200 kernel[0]: KLIF ERROR: scan for file /System/Library/PrivateFrameworks/IMFoundation.framework/Versions/A/IMFoundatio n timed out, returning 1 as status
2012-09-21 12:16:30 +0200 System Preferences[186]: *** WARNING: Method userSpaceScaleFactor in class NSWindow is deprecated on 10.7 and later. It should not be used in new applications. Use convertRectToBacking: instead.
Maybe you are looking for
-
APEX bug:9879227 (ORA-01403: no data found error when using validations)
Hi, We are getting the ORA-01403: no data found error when the APEX page has validations AND a tabular form is also present on the page. I did see a couple of other forum links discussing the issue (bug id: 9879227 ?? ). But what i want to get a conf
-
ITunes cannot connect to the iTunes store
Well since i have updated to the latest version, my itunes hasnt been working. and it has been like this for a numerous number of weeks now and is really frustrating! It says every time i try to get on it: "iTunes could not connect to the iTunes stor
-
How to organize photos in a new album or event
First of all, please allow me to get something off my chest: recently, I gotmyself a new MacPro. My older MacBook died on me. One thing I was really happyabout is that, finally, I had iPhoto. Well, this turned into a nightmare. I donot consider mysel
-
Hi, I'm using SAX Java mapping in one scenario. Problem is when I get some Croatina characters, like Đ or u0160, output XML is not valid. XML Spy complains, IE complains and so on. Customer is sure that data ( XML in CLOB field in Oracle DB) is UTF-
-
Having finally managed to get my cumbersome Apple TV to work, I am loathe to upgrade to iPhoto '09 if it is incompatible with Apple TV (there are hints of incompatibility in other topic streams). The apple.com sales "advertorial" is silent as to whet