CMS issues on 10.6.7

I have read in different places that there are some issues with CMS (Color Management System) under 10.6.7. I would like to know what these issues are about.

Did you run Disk Utility from your original DVD that came with your computer?  if not try that, also it sounds like you had a kernel panic something on your system is not working will with the update, Try starting your computer in safe mode (holding down the "Shift" key when restarting) and see if your system works better. 

Similar Messages

  • Partner page/feed with status of current CMS issues?

    Gday BC users
    I logged a detailed support request around the following, but the Adobe support system had an error processing the form, so it went into a black hole (back button didn't save me this time).
    The CMS is behaving differently than expected at present. Presumably this affects all users of BC presently, so I figure there may be a status page that updates us. Does anybody know of such a page?
    I imagine it would be more useful than every BC user this morning writing in about shared problems with the CMS?
    The problems I am experiencing with the CMS this morning are:
    - After creating a new page, and applying a template, save, close, the template does not actually apply. Opening the page again, reapplying the template, save, close, it does apply.
    - After creating a new page, and wanting to add it to a menu via the 'More Actions' button, there is no such button. Close, reopen, there's a 'More Actions' button.
    Since these are  basic functions playing up, I know they will get attention, but I don't feel like being one of potentially thousands writing in about the issue.
    If such a status page/feed is not available, I'll check the wishlist.
    What do others think about this type of situation — would you like such an informative page or feed?
    cheers
    Darryl

    Hi Darryl,
    I just tried replicating those errors and everything worked for me as expected in Chrome on Mac.
    Here is my attempt to replicate the first issue with the template assignment - http://screencast.com/t/jSlIijab
    I also looked at More Actions after creating that page and Add page to the menu item was there.
    Can you try this in a different browser or clear the cache and cookies? Also, tell us more about the environment you're using. Finally, see if you can provide a URL to your site and I can test this for you on your site. Please give me some details, such as the exact workflow and the name of the template you are assigning.
    Cheers,
    Mario

  • Install CMS Issue

    Hi all,
    I have some issues with CF 8. I used to install ShadoCMS,
    Farcry CMS. When I finished installing them, my computer will has a
    DUMP problem with blue screen (I'm using Win XP). Do you know why I
    meet this function?
    Thanks,
    Vu Pham

    > I have some issues with CF 8. I used to install
    ShadoCMS, Farcry CMS. When I
    > finished installing them, my computer will has a DUMP
    problem with blue screen
    > (I'm using Win XP). Do you know why I meet this
    function?
    I cannot vouch specifically for Farcry, but I used to be on
    the dev team
    for ShadoCMS (many moons ago), and until recently have been
    using it on a
    daily basis in a "third party" capacity.
    There is NOTHING in Shado that could cause your computer to
    blue screen.
    In fact I would go as far as to say there's nothing one could
    write in CFML
    that could cause a computer to blue screen.
    Equally, there's no commonality between Shado and Farcry
    (other than some
    similar techniques, implemented differently), so its unlikely
    that both
    would do the same thing to cause an error (of any
    description).
    If you Java install was faulty I could see how one might
    possibly get
    system errors, but not a full-on BSOD.
    There's a chance you've got some faulty RAM, and the JVM is
    trying to
    address the faulty memory, and causing this sort of problem.
    That's about
    the only thing I can think of that a Java app could influence
    in such a way
    to get a blue-screen.
    What are you doing when the error happens? What's going into
    the JRuna nd
    CF logs immediately before hand?
    By-the-by: it would help, when raising questions like this,
    if you provide
    the versions of the software you're installing (ie: which
    versions of Shado
    and Farcry).
    Adam

  • A Very Serious CMS Issue!

    We have a production environment setup using mssql for the domain data.
    After several days the content management access has become so slow, the site is unbearable to use.
    For example, saving a node in CMS takes 2-3 minutes!!!
    We've implemented every guideline, tutorial, performance mambo-jambo we could find, for the CMS in development. But yet, after a 1000 nodes including not more that 10000 properties, the portal is "dead in the water".
    There are no binaries in the repository, the domain is properly set (according to BEA consultants) and I don't know what else to do.

    if a query or reading nodes was taking time then there were multiple places the problem could exist.
    if saving a single node is taking time you should look at the database first using SQLProfiler or equivalent. If no cause can be found, Then profile your app. if you say there are 1000 nodes only, it should be easy enough to simulate this locally.
    regards
    deepak

  • CMS Assembly issue

    Hi Friends,
    Last week, We were having CMS issues in assembly step, while transporting IR objects from XIQ to XIP. Some of the  SWCVs were in the failed state. We deleted the tracks corresponding to these SWCVs. That way we deleted all the pending transport requests from the queue of these SWCVs. Then we created the tracks again for these SWCVs and started with a clean state. Now, when I try to export on namespace from XIQ to XIP, it is not doing anything on the assembly tab. Means, In the assemble components window, If I select 'subset assembly' and select my change request and hit assemble. It does not assemble and the SWCV still shows the status 'waiting for assembly. If I don't select 'subset assembly' , then it assembles the SWCV. That means I am not able to assemble individual change request and I will have to assemble the entire SWCV, and I don't want that. Please advise what can be the reason for 'subset assembly' not working.
    Thanks,
    Rajesh

    Transporting Objects
    using CMS system. in XI
    1. /people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
    2. /people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
    3. /people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
    4. /people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi --> Overview of Transition from Dev to QA in XI
    5. /people/sravya.talanki2/blog/2005/12/20/inconsistencies-while-transporting-rfc-objects-from-dev-to-qa-150-sp12
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
    http://help.sap.com/saphelp_nw2004s/helpdata/en/93/a3a74046033913e10000000a155106/content.htm --> Transporting XI Objects
    http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content.htm --> Configuring Groups and Transport Targets

  • Dreamweaver CMS Tools or Adobe CMS?

    With the rise of free CMS systems like WordPress, Pligg, Joomla, and Drupal it would be nice to see Adobe create some kind of developer tools for some of these products. Some great things might be:
    1. A CMS Project Setup Dialog in Dreamweaver that provides the following:
         a.Scaffolding    
        b.Code assist specific to the CMS being designed for
         c.Code Snippets
    Or….what does everyone think of an Adobe CMS?
    Something that is flexible enough to easily support Flash, Flash Builder, Air applications, or Spry widgets. This System could be a based on, say-- Drupal with special modules or plugins to interface with Adobe products. This way there would be no need to create an entirely new community or try to complete with popular and well supported CMS products.
    This would be a great way to develop Flash apps for a CMS. If a special version of AMF was built into the Adobe CMS so that users were forced to use best practices for connecting Flash to a CMS. Also this would provide a great prebuilt structure for Flash developers to tie into and get their apps up and running faster.
    This could be great for Air applications as well.
    What does everyone else think?

    Fair enough, I think you make some good points here on the Adobe CMS issue.
    How do you feel about more CMS oriented tools for say template building? Seems to me Dreamweaver is rapidly being surpassed by Eclipse based HTML editors like aptana. I don’t know anybody who isn’t doing most of their development/design work within some kind of CMS system. Perhaps I’m alone in this but I don’t think so.
    The ability to quickly style something and view the results as I work is what makes DW so much better than typing everything by hand in notepad. If style control and document organization assistance is not keeping up with the commonly used tech of the day there is no reason to use DW.
    It would be nice to see Dreamweaver be more robust in the following areas:
    It would be great to have the Property Inspector merged with the CSS window. This particular UI example is very intriguing http://vimeo.com/8109356. The current CSS styling in DW is too cumbersome; you can type the code faster than you can create something using the menus. Why not tie in code snippets with the CSS styling? With this approach I could right click on an object and select a “save style as snippet” option. Later, on a new project I could easily reuse this by selecting an item and in the “style” inspector applying the snippet. Dreamweaver should by default place css in an external .css document that can be assigned or generated by DW. Yes, I know that DW can do this to an extent but it needs to be pushed further. “Smart Style” creation would be nice, by this I mean DW would automatically separate out layout css (divs and ids) and font/element style css into their own separate documents if I want. Joomla templates often have multiple css documents.
    Custom code– Code hinting and code snippets are great but it would be nice to see these go farther and play a bigger role. It would be great to be able to add my own Layouts to the new document window.
    Project instead of Site—it would be awesome to have the ability to create “projects” like The Flex IDE (eclipse) does. I should be able to customize these Project’s directories and pre-populated files using DW. This way if I’m going to build a website that needs a folder for CSS and JS (and I also want the css file to be named style.css and the javascript to be called js.js) that could be a Project template I select and Dreamweaver builds it out for me.
    Grid Wizard—it would be great to have a layout wizard during the new document setup where I can place in column width and number, gutter width and margin width. Dreamweaver would then output an HTML and supporting css document within the project.

  • Trying to set up an ssl connection. Please help!!!

    I have a client computer (Unix machine) which is connected to the tomcat server which in turn connects to another system (acts a server, it runs on windows NT) thru https connection.I already have a Netscape CMS issued certificate file ie .pfx file, which I need to use in setting up the ssl connection. But I see that you cannot directly use this format (pfx) in the keytool command to create a keystore. Can anyone explain how to do this , if you have some idea. I use jdk1.4. also I couldnt find any jar files under jre/lib directory related to jsse package. I just see jsse.jar file. can you explain me what is the alternative approach to copying these jar files(jcert.jar, jnet.jar, jsse.jar) under jre/lib/ext.
    Thanks a lot.

    I can only guess that the keystore file was corrupted when you copied it onto the Linux system. Check the first 8 bytes of the keystore file with a hex editor or viewer. They should be (in hex) fe ed fe ed 00 00 00 0z, where z is either 1 or 2.
    In Linux, you can use the od command, e.g. od -t x1 keystorefile | head -1 should display the first 16 bytes of the file.

  • Is there a known issue for using IE11 when using business catalyst cms

    Is there a known issue for using IE11 when using business catalyst cms?  I have a client trying to update pages on her site using IE11 and the it says it updates successfully, but the new content is not saved.

    I concur with Barry; I see no significant difference in using the Home button vs. the gestures. But the "fade" effect is part of iOS 7.1 and there's no way to disable it that I know of.
    Regards.

  • Issues installing BO XI R 3.0 - Can't get passed CMS Database Information

    I can't get passed the CMS Database Information window from the install:
    I'm choosing an existing CMS database via Oracle.  This CMS is also being used on a different server, is this an issue?  I'm trying to do a side-by-side installation of which I chose a different directory.  For the CMS port I chose 6500, since my other install of BO XI Release 2.0 CMS is using 6400. 
    I'm getting Assert Failure's in the Trace_dbcheck.log:
    Timestamp     ProcessID     ThreadID     Message
    [Mon Aug 04 14:30:58 2008]     5212     8160     trace message: findDFA_LLR: [CmdLineDir] Y:\BO XI R3\package\dbcheck
    sqlrule.llr
    [Mon Aug 04 14:30:58 2008]     5212     8160     trace message: Loading: database subsystem only
    [Mon Aug 04 14:30:59 2008]     5212     8160     trace message: loading libary succeeded
    [Mon Aug 04 14:30:59 2008]     5212     8160     trace message: DatabaseSubsystem::Init()
    [Mon Aug 04 14:30:59 2008]     5212     8160     (d:\titan_rtm\src\framework\libs\cpp\dbwrapper\oracle\OracleXPlatWTF.h:94): trace message: Loading Oracle libclntsh client library.
    [Mon Aug 04 14:30:59 2008]     5212     8160     (.\wireobinit.cpp:96): trace message: Creating the shared CWireObject::PropertyNameMap
    [Mon Aug 04 14:30:59 2008]     5212     8160     (.\wireobinit.cpp:118): trace message: Setting static property map
    [Mon Aug 04 14:30:59 2008]     5212     8160     (.\wireobinit.cpp:125): trace message:  CWireObject::InitializeStaticPropertyMap() - reference count: 1
    [Mon Aug 04 14:30:59 2008]     5212     8160     trace message: initializing subsystem succeeded
    [Mon Aug 04 14:30:59 2008]     5212     8160     trace message: Loading: done loading subsystem - database subsystem only
    [Mon Aug 04 14:30:59 2008]     5212     8160     trace message: DatabaseSubsystem::Connect()
    [Mon Aug 04 14:30:59 2008]     5212     8160     (.\DBConnectionManager.cpp:802): trace message: DBConnectionManager - Setting total target number of connections for pool 0 to 1.
    [Mon Aug 04 14:30:59 2008]     5212     8160     assert failure: (.\OracleDatabase.cpp:117). (0 : Programmer error: OCI_INVALID_HANDLE).
    [Mon Aug 04 14:30:59 2008]     5212     8160     (.\dbutils.cpp:820): trace message: Caught Unknown Error: Internal error: An unknown exception has occurred.
    [Mon Aug 04 14:30:59 2008]     5212     8160     trace message: DatabaseSubsystem::Shutdown()
    [Mon Aug 04 14:30:59 2008]     5212     8160     assert failure: (.\OracleDatabase.cpp:117). (0 : Programmer error: OCI_INVALID_HANDLE).
    [Mon Aug 04 14:30:59 2008]     5212     8160     (.\DBConnectionManager.cpp:719): trace message: Database error while shutting down database: Programmer error. Check ASSERT log.
    [Mon Aug 04 14:30:59 2008]     5212     8160     (.\wireobinit.cpp:175): trace message: CWireObject::TerminateStaticPropertyMap() - reference count: 1
    [Mon Aug 04 14:30:59 2008]     5212     8160     (.\wireobinit.cpp:182): trace message: Releasing static property map

    Hi Tony,
    I did try to create a new SIA with the default servers, and I got the following error:
    Central Configuration Manager:
    Internal error: An unknown exception has occurred.
    In the SvcMgr_20080806_163542_4124.log I got the same error I've been getting from the beginning:
    [Wed Aug 06 16:37:59 2008]     4124     2360     assert failure: (.\OracleDatabase.cpp:117). (0 : Programmer error: OCI_INVALID_HANDLE).
    [Wed Aug 06 16:37:59 2008]     4124     2360     assert failure: (.\OracleDatabase.cpp:117). (0 : Programmer error: OCI_INVALID_HANDLE).
    [Wed Aug 06 16:38:11 2008]     4124     2360     assert failure: (.\OracleDatabase.cpp:117). (0 : Programmer error: OCI_INVALID_HANDLE).
    [Wed Aug 06 16:38:11 2008]     4124     2360     assert failure: (.\OracleDatabase.cpp:117). (0 : Programmer error: OCI_INVALID_HANDLE).
    [Wed Aug 06 16:38:18 2008]     4124     2360     assert failure: (.\OracleDatabase.cpp:117). (0 : Programmer error: OCI_INVALID_HANDLE).
    [Wed Aug 06 16:38:18 2008]     4124     2360     assert failure: (.\OracleDatabase.cpp:117). (0 : Programmer error: OCI_INVALID_HANDLE).
    [Wed Aug 06 16:38:57 2008]     4124     2360     assert failure: (.\OracleDatabase.cpp:117). (0 : Programmer error: OCI_INVALID_HANDLE).
    [Wed Aug 06 16:38:57 2008]     4124     2360     assert failure: (.\OracleDatabase.cpp:117). (0 : Programmer error: OCI_INVALID_HANDLE).
    [Wed Aug 06 16:40:56 2008]     4124     2360     assert failure: (.\OracleDatabase.cpp:117). (0 : Programmer error: OCI_INVALID_HANDLE).
    [Wed Aug 06 16:40:56 2008]     4124     2360     assert failure: (.\OracleDatabase.cpp:117). (0 : Programmer error: OCI_INVALID_HANDLE).
    [Wed Aug 06 16:44:21 2008]     4124     2360     assert failure: (.\OracleDatabase.cpp:117). (0 : Programmer error: OCI_INVALID_HANDLE).
    [Wed Aug 06 16:44:57 2008]     4124     2360     assert failure: (.\OracleDatabase.cpp:117). (0 : Programmer error: OCI_INVALID_HANDLE).
    [Wed Aug 06 16:45:56 2008]     4124     2360     assert failure: (.\OracleDatabase.cpp:117). (0 : Programmer error: OCI_INVALID_HANDLE).
    [Wed Aug 06 16:45:56 2008]     4124     2360     assert failure: (.\OracleDatabase.cpp:117). (0 : Programmer error: OCI_INVALID_HANDLE).
    [Wed Aug 06 16:46:04 2008]     4124     2360     assert failure: (.\OracleDatabase.cpp:117). (0 : Programmer error: OCI_INVALID_HANDLE).
    [Wed Aug 06 16:46:04 2008]     4124     2360     assert failure: (.\OracleDatabase.cpp:117). (0 : Programmer error: OCI_INVALID_HANDLE).
    [Wed Aug 06 18:44:09 2008]     4124     2360     assert failure: (.\OracleDatabase.cpp:117). (0 : Programmer error: OCI_INVALID_HANDLE).
    [Wed Aug 06 18:44:09 2008]     4124     2360     assert failure: (.\OracleDatabase.cpp:117). (0 : Programmer error: OCI_INVALID_HANDLE).
    I just noticed the boe_upgrade_output.xml file that all the directories show the path to my original Business Objects XI R2, when I specified a different directory.  Just a little confused by this.

  • Issue on How to mimic Deski document from CMS to local machine, pass parameter, execute and save in a mutiple report format then store in a network drive.

    Post Author: usaitconsultant
    CA Forum: JAVA
    Would you know if there's a way to mimic Deski
    document from BOXI server(CMS) to local machine, pass parameter, execute and
    save in a mutiple report format then store in a local drive or network
    drive? Most examples and tutorials in BO XI R2 I've seen are scheduling while drilling report is for web intelligence only and not desktop intelligence.  Please let me know your ideas. I would really appreciate your help. Thanks.

    Post Author: usaitconsultant
    CA Forum: JAVA
    Hi Ted,
    Thanks for the reply.The file is not available in the server. Though, I checked CMS and I found an instance in history tab and the status is failed with error below. 
                Error Message:
                A variable prevented the data provider Query 1 with BANRRD30 from being refreshed. (DMA0008).When I checked my codes, I found out that the object Im using is for web intelligence data provider. However, I cannot find any documentation and example for passing parameter values in desktop intelligence data provider. Any idea on this? You think this is not suported by Report Engine SDK?Thanks.    

  • CMS SC Synch issue

    Hello All,
    In NWDI the SC's are showing grey traffic light.
    We have tried various options such as "Update CMS" and "synchorize SC Dependencies" button.
    The traffic light becomes green temporarily but again greys out .
    Any suggestions on what could be going wrong and how we could correct this would be really helpful.
    Thanks in advance,
    Deepthi.

    Hi,
    Check the following:
    1. whether dependent SCs are defined properly in  the 'Usage Dependencies' of the SC in the SLD.
    2. SLD connection is working.
    3. If above two are fine, then 'Update CMS'.
    4. Now, drop the already added SC and look for your SC in the 'Software Components for Development' table and add it by selecting from 'Add Software Component' dialog box.
    Regards
    Srini

  • Installation issue in BOBJ XI 4.0 while specifing existing DATABASE for CMS

    Hi SDN users,
    we are in the process of installating SAP BOBJ XI 4.0 on windows 2003 and SQL 2008. We have created new datasource ( CMS and Audit database) and performed the necessary settings in system DSN in ODBC Data Source Administration.
    Test datasource connection was successful.
    During the installation, we have used the option use existing database ( microsoft SQL server using ODBC). the database which we have created are not populating to specify in the screen. we are not able to proceed.
    Could anyone let us know why the database are not apearing.
    Thanks & Regards,
    Ranadhir

    Not via a forum post.
    You may wish to open a support case with SAP.
    Note that the CMS database must be on the 64-bit, and not 32-bit, side with BI 4.x
    Sincerely,
    Ted Ueda

  • Transports in XI using CMS, assembly issue

    Hi all,
    We have a 3 system landscape of XI . We have JDI configured in D system.
    Currently we are using CMS transports from D to Q and file system transports from Q to P. We have planned to use CMS transports from Q to P also instead of file system transports.
    In that process, when we selected a particular software component in the assembly tab, and selected assemble component, we noticed that all the software compoents assembly is running, which are present in the assembly queue.
    Is there any procedure to stop the assembly for all the software components?
    Thanks.

    Transporting Objects
    using CMS system. in XI
    1. /people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
    2. /people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
    3. /people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
    4. /people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi --> Overview of Transition from Dev to QA in XI
    5. /people/sravya.talanki2/blog/2005/12/20/inconsistencies-while-transporting-rfc-objects-from-dev-to-qa-150-sp12
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
    http://help.sap.com/saphelp_nw2004s/helpdata/en/93/a3a74046033913e10000000a155106/content.htm --> Transporting XI Objects
    http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content.htm --> Configuring Groups and Transport Targets

  • CMS Replication issue

    I've started my upgrade from lync 2010 to lync 2013.  I've got my lync 2013 enterprise pilot pool up, certs installed all services running but I cannot get replication working between my  2013 front end servers.  Just not sure where to start
    troubleshooting this as there are no events logged on any of the servers concerning file replication.  I've been through this 
    http://support.microsoft.com/kb/2759117
    but Im not seeing any of those events logged on any of my front end servers.  The replication service is running.  If I run Get-CsManagementStoreReplicationStatus
    -CentralManagementStoreStatus, All my lync 2010 servers replicas are up to date my but my 2013 servers are not.  I can invoke replication and with in a few seconds lync 2010 is updated by lync 2013 never does, but no errors are logged.  Where
    can I begin to troubleshoot this?  Thanks!!
    Rich

    Hi,
    Would you please tell us which step did you do during migrating from Lync Server 2010 to Lync Server 2013?
    Did you move CMS to 2013 already?
    On Lync Server 2013 FE server:
    Please check if the schema extension have been successfully replicated in your AD DS forest.
    Open Lync Server 2013 Deployment Wizard, click “Install or Update Lync Server System”. In the interface, check if all steps show normally. If not,click "Run" to complete the step.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • ENV Handle issue - Pointing to new CMS

    Hi Experts,
    Since the support for DB2 version 8 is ended, we need to upgrade our DB to 9.5 version. All our repositories and reporting DB's are in version 8 as of now. We are doing a POC by applying a SP5 to the BOXI R 2 and trying to use the DB2 9.5 version.When we point the BO server to this 9.5 version we are getting the below error in CCM
    "Failed to retrieve the cluster name from the database. Reason unable to connect to the database using the provided connection string. Reason: Can't allocate ENV handle"
    and the below error in event viewer
    The root server reported an error Initialization Failure. (Reason: Unable to connect to the database using the provided connection string. Reason: Can't allocate ENV handle).
    Any help in this regard is sincerely appreciable.
    Thanks,
    Siva M S

    You may want to consider posting your issue on the Business Objects > BusinessObjects Enterprise Administration forum in SDN instead.
    This forum pertains to SAP NetWeaver Business Warehouse (SAP BW - formerly SAP BI).

Maybe you are looking for