CMS Replication between Edge and Front End

Hello Support
We have a global Lync Deployment with CMS Store located in UK
We have installed new AU Lync-FE and Edge server but the CMS replication between Front End Server and Lync Edge is not working
I have test 4443 and certainly open. Lync Edge server or the FE server does not logs anything in event viewer.
I have used OCSlogger but I could not find any issue
I have checked certificates and they are all valid.
Can I please get some guidance.
Thanks
Naimesh Mistry
+61401446946
Naimesh Mistry

HI NImesh,
First if you are looking at Lync control panel you might see the Cross because Edge server is non domain machine.
you can check the command Get-CsManagementStoreReplicationStatus
Also there are Cert problem which could lead this issue
The root CA certificate should be located in Trusted Root Certification Authorities ONLY,
and must be removed from any other container.
The intermediate CA certificate should be located in Intermediate Certification AuthoritiesAND Trusted
People ONLY, and must be removed from any other container
Also create the below registry values.
created2 registry values in:HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL as follows (to prevent schnnell.dll from
interfering with validating the certificates by Edge server):
Value
1:
Name: SendTrustedIssuerList
Type: DWord
Value: 0
Value
2:
Name: ClientAuthTrustMode
Type: DWord
Value: 2
then try to reboot the server and run this command Invoke-CsManagementStoreReplication
Hope this works.
Regards
Zahoor

Similar Messages

Diferemce between edge and lazy replciation

hello
what is the differemce between edge and lazy replciation ?
10x all

directly from MordorSybrand the Gollum can guide us into Mordor.
lazy replicationYou disappoint I expected you to leep upon this with insult!!!
Lazy replication is a computer science term which is why you do not no about it.
http://en.wikipedia.org/wiki/Optimistic_replication

Setting up SSO between EP and back-end SAP systems

Can anybody give me some insight about setting up SSO between EP and back-end SAP systems. If possible some links to write up would be great.
Thanu

Hi,
This link gives you a detailed information on setting up SSO : http://help.sap.com/saphelp_nw04/helpdata/en/89/6eb8deaf2f11d5993700508b6b8b11/frameset.htm
Some How-guides:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e676ec90-0201-0010-cfa3-90b7c1291903
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/77378b3d-0b01-0010-ffa5-c6941e286c43
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/80fbc690-0201-0010-1aba-93d5c8232b4a
Regards,
Sunil

Role mapping between Portal and Back end systems

I am new to SAP EP.
I just want to know how the mapping between portal and back end system happens.
Scenario : There is a role in ECC system...say FI India. Now there is a request by the FI team that they want to access this role from Portal. In this case, please tell me how the security team will do it. Because I guess, it has to be done by the security team.

Hi,
Usually the role from backend is uploaded to portal then it will be seen as Group and we need to assign our portal roles to this group. Please refer [this|http://help.sap.com/saphelp_nw73/helpdata/en/d6/7859ec80df46738e23ccb4f4c8c502/content.htm].
Regards,
Samir

How can i configure Distributed cache servers and front-end servers for Streamlined topology in share point 2013??

my question is regarding SharePoint 2013 Farm topology. if i want go with Streamlined topology and having (2 distribute cache and Rm servers+ 2 front-end servers+ 2 batch-processing servers+ cluster sql server) then how distributed servers will
be connecting to front end servers? Can i use windows 2012 NLB feature? if i use NLB and then do i need to install NLB to all distributed servers and front-end servers and split-out services? What will be the configuration regarding my scenario.
Thanks in Advanced!

For the Distributed Cache servers, you simply make them farm members (like any other SharePoint servers) and turn on the Distributed Cache service (while making sure it is disabled on all other farm members). Then, validate no other services (except for
the Foundation Web service due to ease of solution management) is enabled on the DC servers and no end user requests or crawl requests are being routed to the DC servers. You do not need/use NLB for DC.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Data Replication Between Sqlserver and Oracle11g using materialized view.

I have Sqlserver 2005 as my source and oracle11g as my target.I need to populate the target daily with change data from source.
for that we have created a dblink between sqlserver and oracle and replicated that table as a Materialized view in Oracle.
problem we are getting here is Fast refresh option is not available.each day it will pick full data from the source.
is there any way to use Fast refresh in this scenario??
Thanks in advance.
Regards,
Balaram.

Pl do not post duplicates - Data Replication Between Sqlserver and Oracle11g using materialized view.

Re: DB Time , OLAP Time and Front end time?

Hi Gurus,
What is DB Time,OLAP Time and Frontend time? In which scenerio's generally consider them. please guide me, points will be rewarded.
By
RK

Hi,
Query Runtime Statistics (Previously OLAP Statistics) (Changed)
Technical data
Function is
Changed
For Release
Software components
· Component: SAP NetWeaver
· Release 2004s
Assignment to Application Component
BW-BEX-OT
Country Setting
Valid for all countries
Use
With the new architecture for BI reporting, collection of statistics for query runtime analysis was enhanced or changed. The parallelization in the data manager area (during data read) that is being used more frequently has led to splitting the previous "OLAP" statistics data into "data manager" data (such as database access times, RFC times) and front-end and OLAP times. The statistics data is collected in separate tables, but it can be combined using the InfoProvider for the technical content.
The information as to whether statistic data is collected for an object no longer depends on the InfoProvider. Instead it depends on those objects for which the data is collected, which means on a query, a workbook or a Web template. The associated settings are maintained in the RSDDSTAT transaction.
Effects on Existing Data
Due to the changes in the OLAP and front-end architecture, the statistic data collected up to now can only partially be compared with the new data.
Since the structure of the new tables differs greatly from that of the table RSDDSTAT, InfoProviders that are based on previous data (table RSDDSTAT) can no longer be supplied with data.
Effects on Customizing
The Collect Statistics setting is obsolete. Instead you have to determine whether and at which granularity you wish to display the statistics data for the individual objects (query, workbook, Web template). In the RSDDSTAT transaction, you can turn the statistics on and off for all queries for an InfoProvider. The maintenance of the settings (such as before) from the Data Warehousing Workbench can be reached using Tools ® BW Statistics.
DB Time:
It is the time to read the Database
Front End Time:
It is the time the query has taken to run in the front end.
If the above info is useful, please grant me points
Regards,
Subha

Satellite P - Dust grain between display and front

Hello.
After some weeks suddently i have a dust grain between display and front glas.
how can it get there and I must therefore send in the notebook to service?
Greetings from germany and sorry about my bad english.

Hi
I think its difficult to say something about this but I think in this case you can do nothing. The only chance is contacting an authorized service provider because the technicians can disassemble the notebook and check this case. If you disassemble the notebook yourself you will loose the warranty so I wouldnt do this
If you dont know where is the nearest ASP you can search here:
http://eu.computers.toshiba-europe.com > Support & Downloads > Find an authorized service provider
Just contact the technicians. You will see that its interesting to talk with them a little bit and they are friendly. ;)

Diffrence between backend insert and front end insert into a table.

I am developing a conversion program for tax exemption. For this program only ZX_EXEMPTIONS table is used to populate the data and we got confirmation from Oracle also regarding this.For inserting the data into this table we are taking the max of tax_exemption_id which is pk for this table and adding one to it and inserting into the table. But problem here is after inserting from back end we are not able to insert from front end.
It seems backend data is holding the tax_exemption_id which is suppose to reserve by front end data.Please explain the different behavior of populating of tax_exemption_id from front end and back end.

Hi,
i think the problem is that you are using max-value + 1 for tax_exemption_id. But as ZX_EXEMPTIONS is using sequence ZX_EXEMPTIONS_S
for primary key generation, you encounter situation that you are increasing PK Id for this table without increasing sequence value.
When trying to insert rows from front end - which probably uses sequence value - it tries to use a sequence value already used by your backend
process (which generated it by Maxvalue + 1) and would then encounter a primary key violation.
I think you should use sequence mentioned above to generate your PK Ids in backend process as well. And before doing so, check current value
of ZX_EXEMPTIONS_S, as you might need to rebuild the sequence in order to select nextval sucessfully for both frontend and backend.
Regards

Search on App and Front End servers

Hi, we migrating from SharePoint 2010 to SharePoint 2013. And I have a question for Search Service Application.
On SharePoint 2010 Search application we have Crawl hosted on APP server and index partitions hosted on Front-end servers.
On SharePoint 2013 Search application in Search Application Topology I see only App server with all components marked as OK.
Is it enough to have only one App server in Search Application Topology. Or should I add Front-end server to Search Application Topology too?

Hi,
For a good user experience and performance, it is recommend that WFE servers hold Query processing component, App servers hold Analytics processing component，Content processing component，Crawl component，Search administration component. Here is the PowerShell
Script for Configuring Enterprise Search Topology:
$hostWFE = Get-SPEnterpriseSearchServiceInstance -Identity "sp"
$hostApp = Get-SPEnterpriseSearchServiceInstance -Identity "app"
Start-SPEnterpriseSearchServiceInstance -Identity $hostWFE
Start-SPEnterpriseSearchServiceInstance -Identity $hostApp
Get-SPEnterpriseSearchServiceInstance -Identity $hostWFE
Get-SPEnterpriseSearchServiceInstance -Identity $hostApp
$ssa = Get-SPEnterpriseSearchServiceApplication
$newTopology = New-SPEnterpriseSearchTopology -SearchApplication $ssa
New-SPEnterpriseSearchAdminComponent -SearchTopology $newTopology -SearchServiceInstance $hostApp
New-SPEnterpriseSearchCrawlComponent -SearchTopology $newTopology -SearchServiceInstance $hostApp
New-SPEnterpriseSearchContentProcessingComponent -SearchTopology $newTopology -SearchServiceInstance $hostApp
New-SPEnterpriseSearchAnalyticsProcessingComponent -SearchTopology $newTopology -SearchServiceInstance $hostApp
New-SPEnterpriseSearchIndexComponent -SearchTopology $newTopology -SearchServiceInstance $hostApp -IndexPartition 0
New-SPEnterpriseSearchQueryProcessingComponent -SearchTopology $newTopology -SearchServiceInstance $hostWFE
Set-SPEnterpriseSearchTopology -Identity $newTopology
For more information,you can refer to the articles:
https://technet.microsoft.com/en-us/library/jj862354.aspx
https://technet.microsoft.com/en-us/library/dn342836(v=office.15).aspx
Best Regards,
Eric
Eric Tao
TechNet Community Support

Are Registrar pool and Front end pool one and the same?

Hi,
What is the RegistrarPool parameter which is used in Enable-CsUser command?
Is it same as Front end pool because whenever I search for information on Registrar pool, I end up with the links explaining about Front end pools?
Are there any msdn or technet links which talk about this?
Thanks in advance,
Sandeep

Hi Sandeep,
The registrar pool is the pool where user's Lync account is homed.
So if you have a single pool in your Lync environment, then the registrar pool will be same as front end pool. If you have multiple front end pools and you want to find out a user's registrar pool, you can
1. either check the user account in control panel
2. Check the parameter RegistrarPool for a user by running "get-csuser -identity useralias"
Hope this helps.
Regards,

Replication between Oracle and SQL Server

Does anyone have any experience with replicating data between SQL Server and Oracle database system? If so, I am experiencing time out errors when replicating data. I replicating from SQL Server 2k to Oracle and it time out on the Oracle side.

how to configure my apply process to work with sql server by getway , I want to make replication
note :
I make dblink between oracle and sql and make insert from oracle to sql
is it sufficient to make replication by OEM between oracle and oracle and then add new apply process to work with gateway for sql server and how ?

Material replication between SAP and SRM

Howdy friends.
Is there any way to stop having to manually activate the material replication queue between SAP and SRM each time please?
Our admin team go to transaction SMQ2 each day and for 2-3 years have been manually activating each queue manually and doing this several times per queue as the entries do not reach zero. Surely, it is possible to set this up to be automatic as a job?
Ciao,
Mike

Hello,
I could not find the SDN Weblog but here a link to an article that migh help you....[url]http://searchsap.techtarget.com/tip/0,289483,sid21_gci1245134_mem1,00.html[url]
That should help you check your settings, et al and resolve your issue.
Regards, Dean.

Storm 2 switched between edge and EDGE network.

I have an unlocked Storm 2 on the Fido network, it is a Verizon phone.
It seems to switch between the EDGE and edge network. I have tried all the different settings in the mbile network preferences and it doesn't help.
Does anyone else have the same issue?

I think I got an answer for this question.
The version number displayed is the one that was written to Active Directory at the time the Edge subscription was created. Because EdgeSync is a one way process, the version number does not update as you update the Edge Transport server to newer versions.
If you want the version number to reflect the current value, recreate the Edge subscription

I need step by step way to make replication between oracle and sql server

I succeeded in make dblink between oracle and microsoft sql
and I try to insert data using dblink to microsoft sql
what will I do now to make replication between them

how to configure my apply process to work with sql server by getway , I want to make replication
note :
I make dblink between oracle and sql and make insert from oracle to sql
is it sufficient to make replication by OEM between oracle and oracle and then add new apply process to work with gateway for sql server and how ?

CMS Replication between Edge and Front End

Similar Messages

Maybe you are looking for