Cms running, but nothing else?!?!?

We just reinstalled xi31, tomcat - repointed to the original cms data source and everything seemed to be great - all content, users, reports - however, within the ccm, only the cms is running and none of the other services are and I can't get them started?!?!?
Please help?!

Yes, logging into the appllication on the server is OK, everything works great!
here is the worker file;
uriworkermap.properties - IIS
This file provides sample mappings for example wlb
worker defined in workermap.properties.minimal
The general syntax for this file is:
[url]=[Worker name]
/admin/*=wlb
/manager/*=wlb
/jsp-examples/*=wlb
/servlets-examples/*=wlb
/AdminTools/*=wlb
/AnalyticalReporting/*=wlb
/BusinessProcessBI/*=wlb
/CmcApp/*=wlb
/CmcAppActions/*=wlb
/CrystalReports/*=wlb
/dswsbobje/*=wlb
/InfoViewApp/*=wlb
/InfoViewAppActions/*=wlb
/jsfplatform/*=wlb
/OpenDocument/*=wlb
/PerformanceManagement/*=wlb
/PlatformServices/*=wlb
/PMC_Help/*=wlb
/VoyagerClient/*=wlb
/Xcelsius/*=wlb
/XCTemplateUploader/*=wlb
Optionally filter out all .jpeg files inside that context
For no mapping the url has to start with exclamation
!/servlets-examples/*.jpeg=wlb
Mount jkstatus to /jkmanager
For production servers you will need to
secure the access to the /jkmanager url
/jkmanager=jkstatus

Similar Messages

TS3212 I download the newest version and pushed "Run" but nothing else happens. I've tried several times.

What should I do? I need to update the newest version of itunes to run the new iPhone 4 update. Thanks for any help!

I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/quicktime/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

Hard disk turns on but nothing else

Hello, I'm a teacher running a lab full iMacs and I have one giving me problems. When I press the power button I can here the hard disk (or something inside) start running but nothing else happens; no start up tone, no display, nothing. So far I have tried putting the install disk in and holding "C" but this gave me zero response and now the disk won't eject. I have, if I am remembering the terms correct, tried reseting the the SMU and SMC and still got nowhere. Any help someone can give me would be greatly appreciated!
God bless!

HI and welcome to Apple Discussions...
Try starting up in single-user mode and then running fsck:
Resolve startup issues and perform disk maintenance with Disk Utility and fsck
Carolyn

Ok, tried message boards everywhere to try and figure this out before having to post a question. Have a 21.5" iMac running Snow Leopard 10.6.8. After updates no wireless capability for ipad or laptop, imac connects fine but nothing else.No widgets work.

Ok, tried message boards everywhere to try and figure this out before having to post a question. Have a 21.5" iMac running Snow Leopard 10.6.8. After updates no wireless capability for ipad or laptop, imac connects fine but nothing else. No dashboard widgets work, Skype won't work. What goes?

Your post is pretty lengthy and I have to admit I didn't read it all. Please try restarting in Safe Mode, if that doesn't work please do both a SMC and PRAM reset. These may take 2-3 attempts.
SMC RESET
Shut down the computer.
Unplug the computer's power cord and all peripherals.
Press and hold the power button for 5 seconds.
Release the power button.
Attach the computers power cable.
Press the power button to turn on the computer.
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

I am trying to install my CS4 Suite onto new PC with Windows 8. It installed Photoshop but nothing else. It is asking me to "Install with 'setup.exe'" Which i dont think is on there. Is there a way around this? Thanks in advance.

I am trying to install my CS4 Suite onto new PC with Windows 8. It installed Photoshop but nothing else. It is asking me to "Install with 'setup.exe'" Which i dont think is on there. Is there a way around this? Thanks in advance.

Run the cleaner tool and reinstall with sufficient user privileges and security stuff turned off. Your install went wrong because you didn't consider this.
Mylenium

I can print a test page from my Mac to my HP Officejet Pro 8600 but nothing else will print

Hi - I just recently had a hard drive crash and had to revert to an old Time Machine backup on my new hard drive to get my Mac back. Since getting back up and running I have been unable to get my Officejet Pro 8600 back online. My computer is wired to the wireless router but the printer is running wireless. My computer can see the printer just fine and I can even print a "Print Quality Diagnostic" report from my Mac to the printer from the HP utility. But nothing else will print. The firmware is up to date. I have tried resetting the printing system multiple times, rebooting the machine, etc... Nothing works. Any help would be appreciated.
If it helps, we were using a different printer the last time the time machine was backed up, so when we used that backup the old printer was showing, but I reset the printing system, so it shouldn't matter.
Thanks for your help!

Hello @Ryan221,
Welcome to the HP Support Forums! I see your hard drive recently crashed and now you are not longer able to print to your HP Officejet Pro 8600. I see you have reset the printing system with no success. Let's try a different approach:
Scrub/ Uninstall
• Open the Applications folder > HP or Hewlett Packard folder > HP Uninstaller
• Click continue, click on one of the printers in the list.
• * Only do this step if you do not have any other HP Printers. Hold down Control, Option and Command, While holding the three buttons down,
• Click uninstall.
Reset Printing System
1. Click the Apple icon ( ), and then click System Preferences.
2. In the Hardware section, click Print & Fax/Scan. The Print & Fax/Scan dialog box opens.
3. Right-click (or Ctrl +click) in the left panel, and then click Reset printing system…
4. Click OK to confirm the reset.
5. Type the correct Name and Password.
6. Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol..
Repair Disk Permissions
1.On the Dock, click Applications, and then click Utilities.
2.Double-click Disk Utility.
3.Highlight your hard drive/partition on the left (by default this is "Macintosh HD").
4.Click the Repair Disk Permissions button at the bottom of the window.
5.Once the repair is complete, restart the computer.
Restart the printer. Now you can download and install the printer software and install it. Click on the link below to begin the download and follow the on screen instructions:
HP Officejet Pro Full Feature Software and Driver - Mac OS X 10.6, OS X 10.7, OS X 10.8
I hope this helps, please let me know the outcome!
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

I cannot open itunes on my mac. The Icon jumps, but nothing else happens.

I may have shut my computer off while a new version of Itunes was downloading. Not sure if this would affect it, but I can't open it now. When I click on the icon, it jumps a little, but nothing else happens! Any ideas?? Help! I can still open it on my iphone.

Boot from your Snow Leopard install DVD, run Disk Utility and run Disk First Aid.
Reboot.
Then Apple menu > Software Update.
Then reinstall iTunes.

Satalite Pro Power lights come on but nothing else ??

Hello All,
A quick question. Have been given a Satalite Pro. The Power lights up but nothing else.
I've tried the HDD in my Portege m200 and its running XP Pro. The Satalite Pro has 1 > 512 ram stick inside.
The overall condition is good and i'm tempted to spend a few shillings to try and bring it back to life or are we talking major surgery.
My knowledge is basic so would have to pass on to get fixed.
Would welcome your thoughts / suggestions.
Thanks
Neil

Hi
I dont know which Satellite Pro you have exactly but if your Portege M200 uses the same RAM modules, you should try this to exchange them. Sometimes the notebook doesnt start due faulty RAM modules. They are exchanged in few minutes and not expensive.
I doubt that the HDD would be the problem. If the HDD doesnt work, you able to access the BIOS at least.
In worst case its related to other expensive parts like CPU or mainboard. :(

My apple tv stopped working. When I hit a button on the remote I see the signal gets to the Apple TV because the little light flicks but nothing else happens. Anyone know how to fix this??

My Apple TV suddenly stopped working. When I hit a button on the remote the light on the apple tv flickers but nothing else happens. Anyone know how I can fix this?

I had the same problem; Apple TV was working proper then for no reason I got the continuous blinking front LED. The Apple TV has no sound or video output at all. I tried reseting the Apple TV via my Apple remote controller but that didn't do anything for me. I finally called Apple and they told me that the way to fix my box is to reset the Apple TV to factory default. So I had to attach the Apple TV to one of my Apple computers and launch iTunes. Once iTunes was running it recognized my Apple TV and I clicked on the option to restore to factory default. After the restore my Apple TV now works properly. My final action on the Apple TV was to sign into my account and enter my password.

IChat starts but nothing else happens, no windows just greyed out menus

iChat starts but nothing else happens, no windows just greyed out menus
Dunno what it is, i would live it on all night and the next morning i see beach balls and have to force quit it, then when i start it nothing happens, i just see the menus on top, i am forced to restart the computer just to get it running again.
Any advise appreciated.

Hi,
Welcome to the  Discussions
iChat does not close when you use the red button to close windows as some other apps do.
This means iChat can be running but not showing any windows (including any Buddy Lists).
If you set up iChat it will have at least one Buddy List.
Open iChat and go to the Window menu
In here you will see any Buddy List that is Logged in.
Selecting that item or using the keystrokes next to it will show you the Buddy List.
In Tiger/iChat 3 Apple Key and 1 would open the AIM Buddy List, Apple + 2 the Bonjour List (If active) and Apple + 3 any Jabber Buddy list.
As Leopard allows you to log several Screen names in to AIM or Jabber the list can be as mixed up as you want (or Created)
The Order can be changed in iChat menu > Preference > Accounts by dragging the list into the order you want.
My Window menu
The Accounts Prefs List
See more here
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
7:58 PM Tuesday; May 19, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
See more here

HELP NEEDED!! I bought a brand new mac air 11 inch a month ago, and for three days now I can't switch it on.when I do, i can hear the machine is on, but nothing else happens. (yes it is charged). please help

HELP NEEDED!! I bought a brand new mac air 11 inch a month ago, and for three days now I can't switch it on.when I do, i can hear the machine is on, but nothing else happens. (yes it is charged). please help.
I bought it in South Africa and I am currently in Israel.

thank you for the response.its not working, tried that. i can switch the machine on and off, can hear the machine when i hold it to my ear. but nothing works, not the screen, not the sound, nothing.

My first gen 3g iphone photos are not recognised by camera wizard - it sees the phone but nothing else no files - it is not locked - ?

I have a new 4g Iphone - Telstra (Australia) disabled my old 3g and enabled the 4g so the 3g is just enabled to show contacts and photos etc.
I want to download my photos and contacts from the 3g. trouble is that my internet is dial up only at home and impossible to use as too slow.
So my itunes is now out of date (not current module 10.5 + etc.) and the 3g phone is also not operating on the latest ios.
BUT the itunes does sync the phone - but it seems to only sync from computer to phone - so my camera roll on the 3g is not on my computer - therein lies the dilemma - I don't know how to download the photos. I cannot update the ios on the 3g and it seems that might be reqired to "back up"
So first question is how do I back up (not sync) my 3g to itunes.
Do I need to updates its ios first and update iteuns first (in which case thats impossible)
So what else could I do.
It seems the other thing is that even if I could back up the 3g the Itunes won't recognise the 4g as the 4g is ios 4 or something and the itunes is not up to date.
SO I thought I should just use camera wizard or a photo package like iphoto or kodak easy share.
But with camera wizard my computer recognises the 3g phone BUT nothing else. It is greyed out for options, and ini Windoes Explorer it shows it as a camera but when you right click it has no "properties" - and no files show up at all...
it is like it seems the camera and then nothing else.
THE CAMERA is not locked.
WHAT shoudl I do?

also - when I use camera wizard it just tells me the phone is busy or in use and I should retry.
If I use it through windoes explorer - it shows me the camera to computer symbols and a line moving between then but bombs out saying camera is busy.

ACE 4710: Possible to allow a user to clear counters but nothing else?

Hello all,
Using an ACE 4710 we have a user setup with the Network-Monitor role which allows the user to view config, interface status, etc. We would also like to allow this user to clear the interface error counters as well, but nothing else. Is this possible?
Thanks!

Hello Brandon-
Network-Monitor only lets you browse outputs, it is a not a role that allows a user to make any changes including clearing stats. You can create custom roles and domains to get closer to what you want, but you cannot zero in on a single command like that.
i.e.
ACE# conif t
ACE(config)# role MyRole
ACE(config-role)# rule 1 permit modify feature ?
AAA             AAA related commands
access-list     ACL related commands
connection      TCP/UDP related commands
fault-tolerant Fault tolerance related commands
inspect         Appln inspection related commands
interface       Interface related commands
loadbalance     Loadbalancing policy and class commands
pki             PKI related commands
probe           Health probe related commands
rserver         Real server related commands
serverfarm      Serverfarm related commands
ssl             SSL related commands
sticky          Sticky related commands
vip             Virtual server related commands
You can create a permit or deny rule, within that, create/debug/modify/monitor each feature seperately.
Domains allow you to create containers for objects. You can place specific rservers, serverfarms, etc. into it - then apply it to a role so that the user assigned to it can only touch those objects.
Regards,
Chris Higgins

TS1702 Maps program does not work. In standard it only shows a grid. If I ask for a route it shows start and end point and three route boxes but nothing else. It does show directions. If I switch to hybrid it shows to routes but no roads. Background is a

Maps program does not work. In standard it only shows a grid. If I ask for a route it shows start and end point and three route boxes but nothing else. It does show directions. If I switch to hybrid it shows to routes but no roads. Background is a blur.

Do you have a question? This is a user to user help forum. Apple is not here only other users like yourself. You don't report problems to Apple here.
By the way, it might help if you indicated where you are located.
To complain to Apple use http://www.apple.com/feedback/ipad.html

After turning on iMAC the sign in page comes up and accept my password. It then goes to a page with a background pictures but nothing else. If I leave it there it eventually fades and shows the clock. How to I get it to open from there?

After turning on iMAC the sign in page comes up and accept my password. It then goes to a page with a background pictures but nothing else. If I leave it there it eventually fades and shows the clock. How to I get it to open from there?

Hello,
See if it'll Safe Boot from the HD, (holding Shift key down at bootup).

Cms running, but nothing else?!?!?

Similar Messages

Maybe you are looking for