CMS - Transport to Production has all the objects of ID

Hi All,
I am trying to transport objects of Integration Directory from Dev to QA to Production using CMS. It is not a new setup. It is successful all the way, upto Production. But it brings all the objects of all the scenarios from QA to Production, instead of just selected scenario. The transport from Dev to QA is perfect, with objects related to only selected scenario. In 'Assembly' step, there are two options in 'Select component' drop down. 'All components' and 'sap.com.SAP-INTDIR. I selected the later but still it brings all the objects while I select 'lsadmin' and select 'Transfer' in Production Integration Directory.
Any help will be appreciated.
Thanks.
- Atul

try this option....once you send the objects to QA from Dev, neglect that transport and then perform the transport from QA. This will enable the sub-set assembly option in the track. You can then select the required one. This will ensure that only the required transports go through. This happens generally in a four env landscape. We are having the same sort of setup in our project.
Reward if helpful.
Sarath.

Similar Messages

To capture all the objects from an tablespace and restore.

Hi All,
I have a situation in the Schema refresh process where i may have to delete a tablespace and its datafiles.
Then I have to recreate it as it was before and restore all it objects .
Is there any way that i can capture all the objects of that tablespace before it is deleted and then later restore it back as it was .
Any Expert sugggestion is highly apprciated .
The Platform is as below ..
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
PL/SQL Release 11.2.0.2.0 - Production
CORE 11.2.0.2.0 Production
TNS for Linux: Version 11.2.0.2.0 - Production
NLSRTL Version 11.2.0.2.0 - Production
Thanks In Advance .

There are 2 methods you could use with Data Pump.
1. tablespace mode export. expdp user/password tablespaces=<your list here> ...
2. transportable tablespace mode. expdp user/password transport_tablespaces=<your tablespace list here> ...
NOTE: for #2, you need to have your tablespaces in read only mode, then you need to copy the data files, and the
tablespaces need to be self contained.
Hope this helps.
Dean

Transport landscape problem (cannot change the object)

Hi All,
I have problem to change my object in the integration repository.
Initially, i only have 1 XI server (dev and prod), until certain level that i have to add additional server for development. So i just install new xi in new box (fresh). and export the repository object form production and import into this new box.
But the problem is i can't change all the object. is that any workaround to change the configuration so i can use my nex box become development and later on transport back all the changes to original production box.
Appreciate if you can give me some advise.
Thank you and Best Regards
Fernand

Hi,
If you need to change anything in repository
you need to click on the software component in IR
and at the bottom of the screen you will find two checks
that will allow (or not) you to change objects
if you want to change anything in communication channel
you just need to go to change mode
you can change anything in ID
Thanks
Swarup

Copy all the objects from the one system that start with (ZANK)

hi to all,
I have installed the name space /ank/ in the US system, we need to copy all the objects from the India system that start with (Zank) and re-create them as /ank/. problem is how can i copy objects and re-create.
thanks

Hi Ankal,
I guess this is your second thread on the same question. Ok provide these information
>>I have installed the name space /ank/ in the US system,
Are you saying that you have a machine (US System) and i has a namespace /ank/ ? What all objects are there in this namespace?
>>we need to copy all the objects from the India system that start with (Zank) and re-create them as /ank/.
Is the India system on the same US system?
Also tell me whether you have opened the home page of SAP XI/PI? If yes , are you able to open Integration Repository? If yes then how these US and India systems are referred in Integration Repository? Are they referred as separate software components?
Regards
Suraj

HT1495 we have 2 I phones and when I tried to sync my I phone to the computer for a back up(have only 1 account) i lost all my phone contents and my phone has all the contacts/messages etc of my daughter's phone. I had ok'd to "restore settings" in the

we have 2 I phones and when I tried to sync my I phone to the computer for a back up(have only 1 account) i lost all my phone contents and my phone has all the contacts/messages etc of my daughter's phone. I had ok'd to "restore settings" in the process. How do get all the contents/contacts of my phone back?

Correct. When you update via iTunes all synced media that is not in your iTunes library will be lost.
As IO said before:
You can redownload most iTunes pruchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
I do not think it included audio books.

Get all the object at runtime

Hi all,
I have the form that show all the .fmx file within specific directory (e.g : c:\forms).
Is there anyway to list all the objects in selected .fmx ?
Say, test.fmx have :
* Block A :
- Item A1
- Item A2
* Block B :
- Item B1
- Item B2
Regards,
Fendy

use API.

How can i access all the objects of one schema from another schema

Dear All,
How can i access all the objects(Tables,Views,Triggers,Procedures,Functions,Packages etc..) and do the modifications of one schema from another schema (Without using synonyms concept).
Thanks in advance,
Mahi

First of all, synonyms only help you easy reference the object. It doesn't have any implication of object privilege.
As long as you have proper privilege on target object. You can access it with or without synonyms.
Assuming you have proper privilege of objects, you can use following command to assume schema owner.
ALTER SESSION SET CURRENT_SCHEMA = Schema_owner

How do I find out all the objects I use in my application.

As I am creating my documentation, I realized it would be helpful to know all the objects that my application uses ( tables, views, packages etc). Is there a way to find that out i.e. any script or simple alternative etc ?
Thanks, folks!

I am on version 3.0.1.00.08 and am trying to figure this out for this version.The navigation path is different but the report is available somewhere.
Also, is there a way to get the sql from all the pages out ?What do you mean?
Scott

I lost all my playlists trying to download I tunes 8 and becuase It deleted them from all my devices becuase of music match. I have an Ipod that still has all the playlists can I restore them from that device?

I lost all my playlists trying to download I tunes 8 and It deleted them from all my devices becuase of music match. I have an Ipod that still has all the playlists can I restore them from that device?

Hello!
Do you have a Mac computer with Time Machine backups?

How to get all the objects in a stack frame

Hi, what I'm trying to do is get all the objects on the top of the stack and time stamp them.
What I have is this:
static void mearthScanStack(jvmtiEnv *env, jmethodID method, jthread thread){
       jobject obj;
       int i;
       jlong tag;
       jvmtiError err;
       jvmtiLocalVariableEntry *localVarTable;
       jint entryCount;
          err = (*env)->GetLocalVariableTable(env, method, &entryCount, &localVarTable);
          if(err == JVMTI_ERROR_ABSENT_INFORMATION || err == JVMTI_ERROR_NATIVE_METHOD){
               return;
          check_jvmti_error(gdata->jvmti, err, "mearthScanStack: Could not get local variable table");
          for(i = 0; i < entryCount; i++){
               if( (localVarTable.signature)[0] == 'L'){
                    err = (*env)->GetLocalObject(env,     thread, 0, localVarTable[i].slot, &obj);
     check_jvmti_error(gdata->jvmti, err, "mearthScanStack: Could not get local object");
                    err = (*env)->GetTag(env, obj, &tag);
                    check_jvmti_error(gdata->jvmti, err, "mearthScanStack: Could not get tag for local object");
                    timeStampObject(env, obj);
          (*env)->Deallocate(env, localVarTable);
}To walk through, first I get the local object variable table, then I loop through each entry in the table. I check each entries signature to see if it is an object (starts with "L"), and if it is, I try get its tag, and time stamp it.
This doesn't seem to work, however, because I get JVMTI_ERROR_INVALID_SLOT errors on the call to GetLocalObject. How can it be an invalid slot if I am getting the slot out of the local variable table? Am I going about this the right way
Additionally, when I get the the table, I'm ignoring the JVMTI_ERROR_ABSENT_INFORMATION error. I'm not exactly sure under what circustances this information is absent. Is there a way I could scan the stack frame even if it is not available (just probe through the slots maybe?)
Any help is greatly appreciated.

I would think if you intanciate the XMLReference and use IIDXMLElement GetChildCount / GetNthChild would do what you are looking for.
Ian

How to Download the Custom Package Created with all the objects

Hi All,
Could any body let me know how to download a custom package created in sap with all the objects including webdynpros and modulepool programs.
Thanks.

Hi,
U can use open source programs available in net like Mass Download, ZAPLINK, SAPLINK.
Mass Download --> Download the objects
SAPLINK, ZAPLINK --> Used for downloading and also for importing the downloaded objects to other system.
Regards,
Arun

I want to copy all the objects from one user to another... Please help

Hii Experts.... I have a problem here. Please give me solution for this...
I am using Oracle 11g on my windows XP system.
I created a new user named "some"
I want to copy all the objects from scott user to some user... Please help me
Please Explain me in detailed way
Thank you

SowmyRaj wrote:
Hii Experts.... I have a problem here. Please give me solution for this...
I am using Oracle 11g on my windows XP system.
I created a new user named "some"
I want to copy all the objects from scott user to some user... Please help me
If all what you are interested is Scott schema than no need to use the datapump or CTAS. Run demobld.sql in your schema and it would have all the objects of Scott.
http://www.oracle.com/technology/sample_code/tech/sql_plus/htdocs/demobld.html
HTH
Aman....

Laptop has been repaired and for some reason itunes library has been wiped. Ipad still has all the music on, is there a way i can repopulate itunes?

My laptop has been repaired and for some reason my library on itunes has been wiped. Didn't pay attention and synced my iphone so have lost all the tunes off that now too. Ipad still has all the music on, is there an easy and free way to repopulate itunes from the music on the ipad?

See Recover your iTunes library from your iPod or iOS device.
tt2

How to copy a database with all the objects and relationship but with no data

Hello Experts
I am here for your advise as usual, I want to create a copy of my current database from an existing one on SQL Server 2008r2 Standard Edition, here is what I need, I want all the objects including any relationship between the objects and I do
not need any data. I have some idea for using the general script in SSMS, but I still need you expertise advise please, thank you kindly for your help.
Regards

One option is to run BACKUP/RESTORE, once you have restored you run:
SELECT 'ALTER TABLE ' + quotename(s.name) + '.' + quotename(o.name) +
   ' DISABLE TRIGGER ALL '
FROM   sys.schemas s
JOIN   sys.objects o ON o.schema_id = s.schema_id
WHERE o.type = 'U'
AND EXISTS (SELECT *
   FROM   sys.triggers tr
   WHERE tr.parent_id = o.object_id)
Copy result and paste into a query window do to run. Next:
SELECT 'DELETE ' + quotename(s.name) + '.' + quotename(o.name)
FROM   sys.schemas s
JOIN   sys.objects o ON o.schema_id = s.schema_id
WHERE o.type = 'U'
Run this result until you don't get any more errors.
Run the first query again, but change DISABLE to ENABLE.
This is more long-winding than scripting, particularly if you have lots of data. But you know that you will not make any changes whatsoever to the schema.
The scripting in SSMS generally does it right, I believe, but some items are not scripted by default. If you run BACKUP/RESTORE, you know that you get a faithful copy.
Of course, the best way is to keep your code under version control and take the version control system as your ultimate truth.
Erland Sommarskog, SQL Server MVP, [email protected]

Delete all the objects in a package

Hi Guys,
My requirement is that i need to write a program to delete all the objects in a package. In the selection screen i enter the package name and then i get all the objects in the package from TADIR table and display them in an ALV.
There when i select a object and press the delete button ,the object (program ,table, domain,data element etc..) should be deleted .
For this i tried to DEBUG in SE80 and tried to know how SAP is trying to delete the object. But i couldnot unterstand which Function Module or which Class and Method it uses to delete an object.
Guys please let me know how it can be done.
Regards,
Chaithanya.

hi
check this ...
REPORT zxxxxxx.
TYPE-POOLS: slis.
DATA: x_fieldcat TYPE lvc_s_fcat,
      it_fieldcat TYPE lvc_t_fcat,
      g_grid    TYPE REF TO cl_gui_alv_grid,
      x_layout TYPE lvc_s_layo,
       g_custom_container type ref to cl_gui_custom_container,
        g_container type scrfname value 'I_CONTAINER'.
types: BEGIN OF ty_itab ,
        check(1) TYPE c,
       PGMID LIKE TADIR-PGMID,
             END OF ty_itab,
data:itab type standard table of ty_itab,
       itab1 type TADIR.
call screen 100.
*&      Module STATUS_0100 OUTPUT
      text
module STATUS_0100 output.
SET PF-STATUS 'ZSTATUS100'.
if g_custom_container is initial.
    create object g_custom_container
           exporting container_name = g_container.
    create object g_grid
           exporting i_parent = g_custom_container.
SELECT PGMID
FROM TADIR
   INTO CORRESPONDING FIELDS OF TABLE itab where DEVCLASS = selection screen package
x_fieldcat-fieldname = 'CHECK'.
x_fieldcat-seltext = 'CHECK'.
x_fieldcat-checkbox = 'X'.
x_fieldcat-edit = 'X'.
x_fieldcat-tabname = 'ITAB'.
x_fieldcat-col_pos = 1.
APPEND x_fieldcat TO it_fieldcat.
CLEAR x_fieldcat.
x_fieldcat-fieldname = 'PGMIDt'.
x_fieldcat-seltext = 'PGMIDt'.
*x_fieldcat-edit = 'X'.
x_fieldcat-tabname = 'ITAB'.
x_fieldcat-col_pos = 2.
APPEND x_fieldcat TO it_fieldcat.
CLEAR x_fieldcat.
CALL METHOD g_grid->set_table_for_first_display
EXPORTING
    IS_LAYOUT                     = x_layout
CHANGING
    it_outtab                     = itab
    IT_FIELDCATALOG               = it_fieldcat.
endif.
endmodule.                 " STATUS_0100 OUTPUT
*&      Module USER_COMMAND_0100 INPUT
      text
module USER_COMMAND_0100 input.
DATA: ls_outtab LIKE LINE OF itab.
DATA: l_valid TYPE c,
      ok_code like sy-ucomm,
       r_ucomm LIKE sy-ucomm,
       ls_celltab TYPE lvc_s_styl,
      lt_celltab TYPE lvc_t_styl,
      l_index TYPE i.
CALL METHOD g_grid->check_changed_data
IMPORTING
    e_valid = l_valid.
IF l_valid EQ 'X'.
case sy-ucomm.
when 'DELETE'.
LOOP AT itab INTO ls_outtab where check = 'X'.
   move ls_outtab-object to itab1.
delete TADIR from itab1.
ENDLOOP.
endcase.

CMS - Transport to Production has all the objects of ID

Similar Messages

Maybe you are looking for