CMSS 3D messing up the mu

hello...
well, in most cases the expand-upmix to surround sound works and sounds nice... since i got the new curse album (www.curse.de) i have to keep it turned off because its messing up "everything"... voices floating around the channels... sounds horrible to me...
is there any way to toggle this option by a hotkey?!? any other suggestions how to "solve" this?
thx... schnarchnase

ZeaviS wrote:
Hi, I have a sound blast xtremegamer and Senns HD-595 pluged into the front panel audio in. When using CMSS-3D while listening to music, I notice the surround effect, but the quality of the music sounds muffled and the highs don't sound good at all. I was wondering if this is because of settings I have enabled or maybe because the Senns already have soundstage? Or does CMSS-3d just suck with music?
Right now I have speakers set to headphone in the creative control panel, crystallizer enabled and I'm in entertainment mode. Thanks for your help guys.
Vista? Vistas sound options may be overriding creative's. In control panel go to sound..playback..speakers-->configure and make sure it set properly there. I always have to do that separately when I want to use headphones as its always still set to 7. even though I set it to headphones in X-fi options

Similar Messages

Why is my iPod Touch messing up the music library?

Hello,
My iPod Touch is having weird issues with the Music library. I think it started in 5.0.1 but it may have been from 5.0, I'm not too sure about it.
Problem description:
My problem is that my Artist list is corrupt, and my Album list as well. Let me give an example.
Artist list, Alphabetally according to my iPod:
I
Iron Maiden
Jurk
J
Incubus
Jamiroquai
K
Linkin Park
L
Liquido
Kamelot
As you can see, these artists aren't properly sorted alphabetically. I've tried looking at the Info on those files but my iTunes on my iMac shows the proper order just fine, it's the iPod that's messing up. Also my albums seems to be able to appear under different bandnames, sometimes the full album but sometimes only a couple of songs.
What have I tried so far?
I've tried resetting its settings by going into Settings -> General -> Reset -> Reset settings. All that did was messing up my library even more. I had about 18 GB's of music on the iPod but my library suddenly showed only about 25% of that. When I checked the content via Settings -> General -> Info (or About?) it said I had only abou 2 GB's of music on it. However, when I connected the iPod to my iMac, my iTunes told me I still had all 18 GB's on the iPod.
I've tried removing music from the iPod-iTunes sync, and adding it after a sync. Although this did make an artist re-appear, it seemed to mess up the library even more.
I've just tried restoring the iPod. It's been cleared entirely, and then I re-sync'd all my 18 GB's of music and a couple of apps. However, now the library is messed up as previously mentioned.
What am I looking for?
Any advice of tips on how to correct my music library. The alphabetical-order-that's-messed-up is only a minor issue because they're still there, it just annoys me that it's not the way it should be. The albums that are messed up between bands is more annoying because now I can't properly play full albums.
Thank you for reading this rather long message, and hopefully you can help me out.
Kind regards,
Roald

Hey, Roald.
I'm not entirely sure this will help your problem, but since it sounded a lot like my own issue, I thought I'd mention it -- just in case.
I updated my ipod recently to iOS5 and just noticed that some of my artists were messed up -- not necessarily listed under the wrong letter, but some were repeated in both English (as I have them in iTunes) and in Japanese, elsewhere in my music list, which was completely surprising. It also made some of my music show up under completely different names, like the composer instead of the soundtrack, etc. I searched iTunes, in the preferences, and the syncing screen, looking for some sort of setting -- but found nothing.
Eventually, I checked my ipod's actual settings for the 'music' app. There's a setting there that says something like 'sort by album artists', which appeared to have been switched on automatically with the OS update. I flicked it to off and restarted the ipod -- and the ipod's issues were fixed. :3
I don't know if this might be a solution to your problem, but try it anyway! I hope it helps.
-Nirama.

I had completed my iDVD project and burned a disc. It worked great! Then someone messed with the project and put a red frame around the opening screen. Now when I burn the project, it no longer has the opening frame. How can I fix?

I had completed my iDVD project, a Wedding Slideshow with pictures and music, and burned it on a disc. It worked great! Then someone messed with the original project on my computer and clicked around and put a red frame around the opening screen that has the Wedding theme with music. Now when I burn the project to make more DVDs, it burns but no longer has the opening frame. It immediately opens to the iMovie slideshow. How can I fix so I can burn the entire project with opening frames?

As Bengt suggested make a disk image of the successfully burned DVD using Disk Utility. Then you can burn copies any time you need one.
In the future once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
You can then burn it to disk with Disk Utility at the slowest speed available to assure the best burn quality. Always use top quality media: Verbatium, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

On the input : error message if there is no such id in the database to edit? and out put comments messed up the whole

The first page (CoGetEditForm.cfm lets you input the co id
then it get to the next page for you to edit (CoEditForm.cfm). then
it lets take action and UPDATEs (CoEditAction.cfm) finally, it goes
to the colist.cfm to query results and outputs it to html format.
<td>#comm#</td>
Question is that:
1. where and what do I do to have an error message if there
is no such id in the database to edit?
2. the out put comments messed up the whole query results
when I added it to the html out put results. What can I do to clean
this up and where do I put the code?

<html>
<head>
<title>Main Title</title>
<link rel="stylesheet" href="styles.css">
</head>
<body>
<h1>Edit a Co based on co_ID</h1>
<table>
<cfform action="CO_EditForm.cfm" method="POST">
<tr>
<td>Co_ID</td>
<td>
<cfinput type="Text"
name="Co_ID"
message="Please enter the Co_ID"
validate="integer"
required="Yes"
size="22"
maxlength="20">
</td>
</tr>
<tr>
<td> </td>
<td>
<input type="submit" value="GetCo">
</td>
</tr>
</cfform>
</table>
</body>
</html>

<cfquery name="GetCo"
datasource="#Request.MainDSN#">
SELECT
COName,
ADD,
City,
st,
zip,
comm
FROM
CO
WHERE
Co_ID = #Val(Co_ID)#
</cfquery>
<html>
<head>
<title>Main Title</title>
<link rel="stylesheet" href="styles.css">
</head>
<body>
<h1>Edit a CO</h1>
<table>
<cfform action="COEditAction.cfm" method="POST">
<cfoutput>
<input type="hidden" name="COID" value="#Val(COID)#">
</cfoutput>
<tr>
<td>CO Name</td>
<td>
<cfinput type="Text"
name="COName"
value="#GetCO.COName#"
message="Please enter a name for this CO."
required="Yes"
size="40"
maxlength="40">
</td>
</tr>
<tr>
<td>ADD</td>
<td>
<cfinput type="Text"
name="ADD"
value="#GetCO.ADD#"
message="Please enter this new CO's ADD."
required="Yes"
size="32"
maxlength="30">
</td>
</tr>
<tr>
<td>City</td>
<td>
<cfinput type="Text"
name="City"
value="#GetCO.City#"
message="Please enter a city."
required="Yes"
size="22"
maxlength="20">
</td>
</tr>
<tr>
<td>st</td>
<td>
<cfinput type="Text"
name="st"
value="#GetCO.st#"
message="Please enter a st."
required="Yes"
size="3"
maxlength="2">
</td>
</tr>
<tr>
<td>ZIP Code</td>
<td>
<cfinput type="Text"
name="zip"
value="#GetCO.zip#"
message="Please enter a valid ZIP Code."
validate="zip"
required="Yes"
size="11"
maxlength="10">
</td>
</tr>
<tr>
<td>comm</td>
<td>
<textarea cols="40" rows="5"
name="comm"><cfoutput>#GetCO.comm#</cfoutput></textarea>
</td>
</tr>
<tr>
<td> </td>
<td>
<input type="submit" value="Update Database">
</td>
</tr>
</cfform>
</table>
</body>
</html>
<cfquery name="UpdateCO"
datasource="#Request.MainDSN#">
UPDATE CO
SET
COName = '#Trim(Form.COName)#',
ADD = '#Trim(Form.ADD)#',
City = '#Trim(Form.City)#',
st = '#Trim(Form.st)#',
zip = '#Trim(Form.zip)#',
comm =
<cfif Len(Trim(Form.comm)) GT 0>
'#Trim(Form.comm)#'
<cfelse>
NULL
</cfif>
WHERE
COID = #Val(Form.COID)#
</cfquery>
<cflocation url="COList.cfm">
<cfquery name="GetCo"
datasource="#Request.MainDSN#">
SELECT
coID,
coName,
ADD,
City,
st,
zip,
comm
FROM
co
ORDER BY
coName ASC
</cfquery>
<html>
<head>
<title>title getco</title>
<link rel="stylesheet" href="styles.css">
</head>
<body>
<h1>y List</h1>
<table>
<tr>
<td><b>ID</b></td>
<td><b>Name</b></td>
<td><b>ADD</b></td>
<td><b>City</b></td>
<td><b>st</b></td>
<td><b>ZIP Code</b></td>
<td><b>comm</b></td>
<td> </td>
</tr>
<cfoutput query="GetCompanies">
<tr bgcolor="<cfif currentrow mod
2>GHOSTWHITE<cfelse>WHITE</cfif>">
<td>#coID#</td>
<td>#coName#</td>
<td>#ADD#</td>
<td>#City#</td>
<td>#st#</td>
<td>#zip#</td>
<td>#comm#</td>
<td>
<a
href="EmployeeList.cfm?coID=#coID#">Employees</a>
<a href="coAddForm.cfm">Add</a>
<a href="coEditForm.cfm?coID=#coID#">Edit</a>
<a
href="coDeleteForm.cfm?coID=#coID#">Delete</a>
</td>
</tr>
</cfoutput>
</table>
</body>
</html>

After your SQL SELECT on CO_EditForm.cfm, you need a
<CFIF> that checks to see if any records were retrieved. See
below.

I lost my phone and i got an unlocked 4s from my gf she used it before an its still connected to her icloud is there a way i can restore my icloud back up to replace hers without messing up the unlock also my latest backup isnt showing on my pc help plz!!

i lost my phone and i got an unlocked 4s from my gf she used it before an its still connected to her icloud is there a way i can restore my icloud back up to replace hers without messing up the unlock also my latest backup isnt showing on my pc help plz!!

Please please help me, if you know how.

Can anyone explain me why iTunes is just changing song names an messing up the order?

I have different songs that I would like to upload onto the phone iOS 6.1.3
So I copy the songe into a playlist in iTunes.
Song names are
whatever_xx-001
whatever_xx-002
whatever_xx-020
what does iTunes? It just changes the song names and make a complete mess with the order of the songs:
whatever xx 1
whatever xx 20
whatever xx 2
My question is, if iTunes is not usable for copying numbered songs? I cannot imagine that this tool is so stupid? Or am I doing something wrong?
Thank you for a hint.

Now I look more carefully at your list, I see what you mean.
iTunes does have a method for Artist sorting if the Sort fields are empty (as most of mine are), but offhand, I don't know much about it to be honest. The glaring issue in the your screenshot is Ministry Of Sound.
If any of the other experienced contributors add to this thread (note the number of points they have) with better advice than I can offer, take it.
In the meantime, start with the Ministry Of Sound and check the Sort Artist field. If you highlight everything by an artist, or a complete album, and select Get Info/Sorting, you see this view:
and if you select just a single song, it's this view:
I assume, unless you tell me otherwise, that the Ministry Of Sound entries will show something in there which is causing iTunes to put them in with the entries for A. Replace it with Ministry Of Sound. If the field is blank (which it will be if there are two different entries in your selection) simply type in Ministry Of Sound. Does that make any difference?
If it does, then check your other entries to see what is causing the issue with them.
You may find the the artist "Joey Bada$$" has been set to sort by Bada$$, Joey.
This screenshot of my Artists column may explain why B.o.B is before Baauer:
If you don't like it that way, change the entry in the Sort Artist field to suit you.

How do I get rid of dead time at the beginning of the song without messing with the timing of staggered entrances of various tracks/instrument?

How do I get rid of dead time at the beginning of the song without messing with the timing of staggered entrances of various tracks/instrument?

marykaymaas wrote:
How do I get rid of dead time at the beginning of the song without messing with the timing of staggered entrances of various tracks/instrument?
either Select All and drag to the left (turn on the Lock Automation menuItem if you have any automation curves)
or
use the Cycle Region to export the exact length you wish:
http://www.bulletsandbones.com/GB/GBFAQ.html#exportexactlength
(Let the page FULLY load. The link to your answer is at the top of your screen)

I uploaded last release of CC (05/28/2014) but it did a mess on the entire pc: when I launched Photoshop it appeared a driver error on my graphic hardware; internet stopped to work and photoshop itself didn't respond.

Hi, this morning I installed last upgrade of CC (05/28/2014) but it did a mess on the entire pc: when I launched Photoshop it appeared a driver error on my graphic hardware (I checked, everything was up to date nd correctly working) and Photoshop didn't respond; internet stopped to work too.
The only way was to uninstall The CC App and create a restore point after uninstalling (It wasn't possible restore a previous one BEFORE the upgrade of this morning....)
My Processor is Intel(R) Core(TM) i7-4500U CPU @ GHz 2.40 GHz
RAM is 8GB
What do I have to do?
Reinstall it without upgrading it?
I would really appreciate that upgrades would be tested before being released.... -_-

Moving this discussion to the Photoshop General Discussion forum.

My iMac 20 inch 2.4 has developed a very annoying flicker. It looks like somebody is messing with the brightness but than really quick. Any ideas on how to solve this problem ?

My almost four year old iMac 20 inch 2.4 ghz Intel Core 2 Duo has recently been giving me a headache. The screen is flickering a lot. It looks like somebody is messing with the screen brightness at a really fast rate. I have no idea what it could be but have tried to recalibrate the screen, stopped certain dashboard apps, even changed the desktop picture and screensaver. Has anybody else had the same problem or could somebody help me in getting rid of this flicker. It feels like it is a software issue as it happens intermittently rather than continuous.
Pleas help me !
Gersom

My almost four year old iMac 20 inch 2.4 ghz Intel Core 2 Duo has recently been giving me a headache. The screen is flickering a lot. It looks like somebody is messing with the screen brightness at a really fast rate. I have no idea what it could be but have tried to recalibrate the screen, stopped certain dashboard apps, even changed the desktop picture and screensaver. Has anybody else had the same problem or could somebody help me in getting rid of this flicker. It feels like it is a software issue as it happens intermittently rather than continuous.
Pleas help me !
Gersom

Editable form text editing messing up the whole form

Hi All,
I've created a fillable form in Acrobat X but at the end, I realized that I left a spelling mistake. Now when I try to fix this mistake using Edit Document Text, it changes the orientation and alignment of other fields around it causing messing up the whole form. Can anyone advise any solution. I can provide the form to you to have a look or correct it for me if someone can kindly. Please advise as this is urgent and this form needs to be delivered ASAP. Please see the screenshot below. I need to correct the spelling of Blocked which is written as BOCKED without changing other formatting of the document. Thanks in anticipation!

Hi @Gilad,
Thanks for the suggestion but this file was originally created in Word and after conversion to PDF, I've made a lot of radio buttons, check-boxes in this file which I certainly don't want to redo. Now if I convert this page back to Word and edit this single word, then it means that I would have to create all the radio buttons, check boxes etc again which is time consuming. Any help if I can just correct the spelling of this single word without changing the formatting of the fields besides it?

I have 9,046 emails in my inbox. I was messing with the setting to try to empty the inbox (100 emails) in one hit and somehow .... how do I remove them all.

I was messing with the setting to try to empty the inbox (100 emails) in one hit and somehow I managed to get 9,046 emails in there.... how do I remove them all?

Hans M wrote:
If there is no other solution this Problem should be forwarded to the developers.
Feel free to do that:
http://www.apple.com/feedback

Transitions is messed up the first time it runs

In the following code when the need to register button is pressed the transitions is messed up the first time it runs
<?xml version="1.0" ?>

<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
               xmlns:mx="library://ns.adobe.com/flex/mx"
               xmlns:s="library://ns.adobe.com/flex/spark">
    
    <s:states>
        <s:State name="default"/>
        <s:State name="Register"/>
    </s:states>
    
    <s:transitions>
        <s:Transition fromState="default">
            <s:Parallel>
                <mx:Resize target="{loginPanel}" duration="500"/>
                <s:Wipe direction="right" target="{confirm}"/>
            </s:Parallel>
        </s:Transition>
        <s:Transition fromState="Register">
            <s:Sequence>
                <mx:Resize target="{loginPanel}" duration="100"/>
            </s:Sequence>
        </s:Transition>
    </s:transitions>
    
    <s:Panel id="loginPanel"
             title="Login" title.Register="Register">
        <s:layout>
            <s:VerticalLayout/>
        </s:layout>
        <mx:Form id="loginForm">
            <mx:FormItem label="Username:">
                <s:TextInput/>
            </mx:FormItem>
            <mx:FormItem label="Password:">
                <s:TextInput/>
            </mx:FormItem>
            
            <mx:FormItem id="confirm" label="Confirm:" includeIn="Register">
                <s:TextInput id="myTI"/>
            </mx:FormItem>
            <mx:FormItem direction="horizontal" >
                
                
                
                <mx:LinkButton label="Return to Login"
                               includeIn="Register"
                               click="currentState=''"/>
                <mx:Spacer width="100%" id="spacer1"/>
                
                <mx:LinkButton id="registerLink"
                               includeIn="default"
                               label="Need to Register?"
                               click="currentState='Register'"/>
                <s:Button id="loginButton"
                          label="Login" label.Register="Register"/>
            </mx:FormItem>
        </mx:Form>
    </s:Panel>
</s:Application>

Looks like this might be the bug: http://bugs.adobe.com/jira/browse/SDK-28787

Is it possible to get post or Get variables into a flex applicaition without messing with the flashvars?

Is it possible to get post or Get variables into a flex
applicaition without messing with the flashvars?

Probably externalInterface, and maybe BrowserManager.
But both of those are much harder and messier than flashvars.
Why are you trying to avoid the easy way?

I have an iPhone 3GS that I dropped in water. It still does everything but get service, can I back it up and transfer its data to a new iPhone 3GS? I heard something about how loading a backup from a water damaged phone could mess up the new one...

I have an iPhone 3GS that I dropped in water for a moment. After drying it and everything, it still does everything but get service. Can I back it up and transfer its data to a new iPhone 3GS? I heard something about how loading a backup from a water damaged phone could mess up the new one... is this true? I would truly appreciate the help, please let me know, thanks!

Sounds like your phone is in recovery mode. In this case, all data on it is gone. There's nothing to back up.

How do I go about deleting old versions of Firefox without messing up the latest version and access to Firefox after the deletes?

I have about 5 versions of Firefox on my macbook. Please advise as to deleting outdated versions after new installs so that I do not mess with the programme and lose access to Firefox.

Move the previous versions to Trash, I mean uninstall them.

CMSS 3D messing up the mu

Similar Messages

Maybe you are looking for