CMSUnexpectedException when I create a new track or copy.

Hi,
When I create a new track or copy track CMS'll retrun an error
Unexpected error; inform your system administrator: com.sap.cms.util.exception.CMSUnexpectedException: CBS Server Error: CBS failed to communicate with some other server( internal code: COMMUNICATION_ERROR)
I restart JDI but it still error.
What should I do?
Regards,
Khempat

I find a answer in topic ht[CMS SCA imports fail & CBS error while activating|CMS SCA imports fail & CBS error while activating]
tx for ur care

Similar Messages

When I create a new track for Guitar it labels the track "Clean Combo" no matter which amp I select. Anyone else noticing this?

When I create a new track for Guitar it labels the track "Clean Combo" no matter which amp I select. Anyone else noticing this?

Look at it this way: there is no need to record that effect onto the audiofile. This is a great advantage of modern recording, and this is how most DAW's work by default. Just leave the plugin on when playing back.
Only for CPU management reasons it may be advantageous in certain situations to either freeze a track or bounce it in place (both techniques will render an audiofile that may include the effect). But in general it is a (very) good thing that it is possible to tweak any effect after recording, and have a clean, unprocessed recorded signal to work with. And if the effect was perfect at the time of recording, well, just leave the plugin(s) engaged.
http://help.apple.com/logicpro/mac/10.1/#/lgcp8ae5826e
http://help.apple.com/logicpro/mac/10.1/#/lgcpf1cbfd51
ps: there is a way to record plugin effected signal live into the audiofile, but it involves creating a custom environment setup.

When I create a new track and region, the new region copies the previous region contents; why?

In trying to experiment with new instruments included in 10.1. , I create a new instrument track and region, nominate the new instrument, and... I see that the empty region I just created isn't empty at all, it is filled with the notes created in a previous track, and no sound... is this a glitch or am I doing something wrong?

You can highlight the URL in the Location Bar of a Tab you want to duplicate and use '''{Alt + Enter}''' or you can '''Middle-click the Reload button''' at the right-side of the Location Bar (no need to highlight the URL there).
Both of those methods will work whether you have '''''Tabs on Top''''' selected or not.

Problem while creating a new track

Hi,
When we create a new track, we get the following exception:
Unexpected error; inform your system administrator: com.sap.cms.util.exception.CMSUnexpectedException: com.tssap.dtr.client.lib.cms.DTR.connect(Ljava/lang/String;Lcom/tssap/dtr/client/lib/protocol/ISessionContext;)V
We have created a new product and a software component and defined the dependencies for the software component (SAP_BUILDT, SAP_JTECHS & SAP-JEE). In the CMS, we have done Update CMS. We are able to see the software component and have added the same in the 'Software Components for Development'. All the usage dependencies are clearly visible.
When we save the track, we get the above exception. Can any one of you please respond this query?
Thanks in advance.
Regards,
Ravi

Hi Ravi,
We enocounted a similar problem once. For our situation it was a missing DTR url in the lanscape configurator. To check/fix this do the following:
1) login to CMS
2) click on the Landscape Configurator link
3) if not already selected, choose the track in the list of tracks on the left
4) click on the Track Data tab for the selected track
5) verify that the Design Time Repository URL is specified and correct (e.g. http://<server>:<port>/dtr
Save the configuration.
Hope this helps.

Glitch? track creating a new track...

ok, so lets say I have 3 tracks... and in my window, you can see both "tracks"' and "mixer"(with volume/pan/level)
when I push the big "+" to add a new track, it "collapses my tracks" ( as if I am pushcin the little arrow at the top right by "tracks") - now the mixer is no longer visible for each track...
so then, I push the arrow again, and each of the tracks fall down into their place, as they should, but only like part of the gray box for each track (like where it says new track) is visible... I have to roll my mouse over the box for the rest of it to show up.. does that make sense.. it seems like some sort of graphic glitch- it is the latest version of GB.. I don't get it... on top of all this, my mixers have dissapeared again too, so I have to push the arrow again..
in short, every time I create a new track, I have to click the arrow, then roll my mouse over the gray boxes for me to able to see them, then click the arrow again so the mixer pops back out.. its strange..
I am new to GB, but want to know if this has happened to others, or if anyone knows how to fix it.. its annoying!
thanks
in short, after I

I really appreciate that. I went through every setting I could think of and didn't "check" or uncheck the obvious. Lifesaver.

Problem in creating a new track

Hi,
I am trying to create a new track in NWDi like this
1.created a product,sofware unit and software component and defined the dependencies(required components like BUILDT,JTECHS etc)
2.Went to landscape configurator and clicked on track data and enter the track name and add the sc created .
3.After adding the sc created required components came automatically in the track data screen.
4.i saved the track data then it says track is created
5.I went to NWDS and trying to import that track.
6.i can see all the components in that track but inside each component like BUILDT i dont see any sda files(external libraries or jar files) they are just empty.
Did i miss any step here in creating the track
please help me in resolving this issue
Bala

I followed the same steps as mentioned below
1. you are running JDI on SPS12
2. you have defined your software component "mycomp" at the SLD
3. you have declared the three SCs BUILDT, JTECHS, JEE as
dependent SCs for "mycomp" at the SLD
4. after these you did an "update CMS" at the "domain data" configuration
5. you created your track and choose for your SCs "mycomp" as software component.
and now:
6. When i added the developed component it brought all the required (JTECHS,BUILDT,JEE)components in the Landscape configurator. You already defined the usage of these SCs
in the SLD at step 3.
In older Versions of the JDI (e.g. SPS10) you saw after the choice
of "mycomp" inside the track data also the dependent SCs. This is
not the case any more in SPS13.
Summary: only define your dependent SCs at the SLD, update CMS,
remove the definition from you track directly and try again.
But the problem is when i go to Transport Studio and checked in in check-in tab and after went to development tab and imported and after sometime it is saying import failed.And when i go to NWDS it is bringing all the scs in my trck but there are no libraries in my scs
I did observe a problem in CBS for this new track
when i go to CBS and select my track and look for DCs in JTECHS,JEE,BUILDT scs there are no DCS(0 dcs).
I think if i can resolve this i can create a new track without any problems
Please help me in resolving this issue

When I create a new instrument it defaults to the EVP88 Electric Piano

Why is it everytime I start a new project and create a software instrument, or I add a new instrument to an existing song, it defauls to the EVP88 Electic Piano? It started doing this after I plugged in a USB controller keyboard so I would have to try and play keyboard parts on my iMacs keyboard. I called Applecare but my support for Logic has run out (I didn't use my Logic for a long time after installing it, logn story) so they wanted me to purchase a really expensive support package but I'm not a professinal just a regualr guy. The tech told me that it always defaults to EVP88 when yu create a new trick, bu I don't remember it doin that when I first statred. Please someone help me with this!!!

Hi
When you make a new track, un-check the "Open Library" checkbox.
CCT

When I create a New Folder (on the desktop or in Finder), the system uses the Generic Document Icon instead of the Generic Folder Icon. How can I change this back?

When I create a New Folder (on the desktop or in Finder), the system uses the Generic Document Icon instead of the Generic Folder Icon. How can I change this back?
All of a sudden I noticed that most of the folders on my computer were no longer using the folder icon, but the generic document icon. I had to manually change back the icon being used by opening Get Info for each folder and copying and pasting the generic folder icon from some folders that remained unchanged. Now whenever I create a New Folder (right click -> "New Folder"), the icon that shows up is the generic document icon (white page with top right corner turned down). And I have to manually change it so it shows up as a folder in Finder or on my desktop. I don't know why or how this switch happened. All of the folders now on my computer look ok, but I need to change the default so when I create a New Folder it uses the correct icon.
I have also Forced Relaunch of my Finder and rebooted the system. I downloaded Candybar but am not sure what will fix anything, so I haven't proceeded.
Anyone know how I can do this? Thanks.

Anyone?

How do I get rid of the auto signature "sent from my iPhone" when I create a new message?

how do I get rid of the auto signature "sent from my iPhone" when I create a new message?

Settings -> Mail -> Signature and edit it to whatever you'd like.

I have set up a second iTunes user account on my PC, but when I create the new iTunes account it copies the music, videos etc from the original account and they seem to be linked. What am I doing wrong?

I have set up a second iTunes user account on my PC, but when I create the new iTunes account it copies the music, videos etc from the original account and they seem to be linked, so that when I delete a song from one library it deletes from the other one.
On the online tutorials I've seen it shows that when you create a new iTunes library it should open as a blank account, but that isn't happening.
What am I doing wrong?

If you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar
If necessary:
iOS: Device not recognized in iTunes for Windows
or
iOS: Device not recognized in iTunes for Mac OS X

When i create a new window, firefox Yanks me back to where i was and i dont want to be yanked back.

i duplicate current pages by create new windows on a very frequent basis;
to do this, i go to the top of the page that i want to duplicate and right-click and click on Open Link in New Window;
I specifically want to duplicate the page i am on in another Window, not a new tab;
Because
Duplicating the current page to Open Link in New Tab, gives tabs on the top of my screen;
Duplicating the current page to Open Link in New Window, gives 'tabs' on the bottom of my screen;
I want 'tabs' to show on the bottom of my screen and to do that i have to Open Link in New Window;
My question and What is happening, is that firefox is yanking me back to the page that i have just duplicated by right-clicking at the top of the page and clicking on Open Link in New Window;
When i create the new Window, firefox yanks me back to the page that i just duplicated and i dont want to be yanked back to that page;
I want to stay on the page that i just duplicated.
I have tried changing the way tabs work in Options but nothing checked or unchecked results in the specific way i want to have new Windows open and STAY on that newly created Window and not be YANKED back to the window i duplicated.

The original window did not have a Flash object, but does the window that hides itself contain a Flash object? That is the usual pattern for this bug in the plugin's protected mode feature.
If you have not already tried disabling it, the following pages/posts provide different ways to do that:
* Adobe support article under the heading "Last Resort": [http://forums.adobe.com/message/4468493#TemporaryWorkaround Adobe Forums: How do I troubleshoot Flash Player's protected mode for Firefox?]
* Manual steps: https://support.mozilla.org/questions/968190?page=5#answer-509209
* Batch file to automate the manual steps: https://support.mozilla.org/questions/982093#answer-518078
Flash needs to completely unload from memory (restarting Firefox might help) before this would take effect.
More history: [https://support.mozilla.org/questions/955659 Opening New Windows and Shockwave Flash]

Recently, when I create a new album (untitled), it immediately fills with picture either from the album above it or, if I have a Faces collection open, with the pictures from that collection. Why and how do I fix it?

Recently, when I create a new album (untitled), it immediately fills it immediately fills with picture either from the album above it or, if I have a Faces collection open, with the pictures from that collection. Why and how do I fix it?

When a new album is created it will fill with whatever is in the right hand window, If you're in the Events or Photos mode it will contain all photos in the library. Yes, strange behavior.
OT

How to create a new track with existing changes in the production

Hi
I need to create a new track for the ESS package with the existing changes that we already made to the ESS package. We already have a development track and the customisation to the ESS package has been already done in that track. Now my requirement is to create a new track ( DEV, CONS, TEST and PROD) with DEV having all the existing changes we made. In short how do I import the SCA's from development track PROD to the new track DEV. We are on NW2004 SPS20.
points rewarded for helpful answers
Thanks
Sheril

Param
Have you done the import in DEV and CONS and then Assembled .. ?
If yes then go to /usr/sap/jtrans/CMS/archives/.......... -> check for the track name and then the last .SCA file in it . Copy that SCA file in the /usr/sap/jtrans/CMS/inbox and go to the new track and configure the checkin to inbox ... You should see the SCA in there ... check those in and you are ready to have those SCA in your Production track ..
If no then you need to know the NWDS functions .. I shall send you the details to bring the incomplete changes (not assembled) to new track .. let me know if the first one worked ..
Thanks
Rahul

How to load a default prefereces when a create a new profile

i need disable access for a urer creates a new profile in firefox. if it not possible block a profiler manager in firefox, other solution is when user create a new firefox profile, it load defaults preferences

hello, probably the best solution in this case is to use the ''mozilla.cfg'' file to lock certain preferences - it will work regardless of which profile is used. for more information about how to implement it please see http://kb.mozillazine.org/Locking_preferences

When I create a new document the icon doesn't show up in the finder

When I create a new document and close it the icon is not visible in the finder until I do a search. Then it shows up. I can't move it to other locations.

So where have you saved it to?
When you search for a file that is a search result not actually a folder.
The real location of the file should be shown in a chain of nested folders along the bottom of that window and you can open the folder that the file is in by double clicking on the enclosing folder's icon.
You need to pay attention to where you are saving files or you will have trouble opening the correct one later.
If you are new to the Mac go to http://www.apple.com/support/mac101/
If you have come from Windows the method of saving, finding and organising files is not too dissimilar.
Peter

CMSUnexpectedException when I create a new track or copy.

Similar Messages

Maybe you are looking for