CMTRACE The subsystem needed to support the image is not present.

the subsystem needed to support the image is not present.
I have a x64 bit winpe. I am trying to add a cmtrace to a winpe. Getting an error "the subsystem needed to support the image is not present",
i though it was related to a wrong architecture. So i added both. Still getting the same error.<o:p></o:p>
How can i make sure one of added exe's is a true x64. And can this error be related to something esle?<o:p></o:p>
Thank you.<o:p></o:p>

Run cmtrace.exe on a x64 machine and leave it running...
Launch Task Manager and find the application with the description: CMTrace_amd64.exe. IT will have a random name like TRA401A.tmp.
Go to the %temp% folder and grab that TRA401A.tmp file, copy it to wherever and give it a unique name like CMTrace64.exe.
Now you have the x64 version of CMTrace.exe
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com

Similar Messages

  • I try to insert some images on a website but the images are not in the right color mode. I do not know what to do? and also I have 1200 images to insert so I can not change one after one. So I need to set up an action, but I donot know how to do it... Tha

    I try to insert some images on a website but the images are not in the right color mode. I do not know what to do? and also I have 1200 images to insert so I can not change one after one. So I need to set up an action, but I donot know how to do it... Thanks

    What is the problem specifiaclly?
    If the images are intended for web use I would recommend converting them to sRGB which could be done with Edit > Convert to Profile or with File > Save for Web, but as including a Save step in Actions and applying them as Batch can sometimes cause problems I would go with regular converting.
    You could also try Image Processor Pro.
    Scripts Page

  • I have sync'ed my ipad with my new mac book air, but some of the images did not download!

    I have sync'ed my ipad with my new mac book air, but some of the images did not download to the computer. 
    I need these pictures! 
    Iphoto does not see these images.  How can I download them into my computer?
    I have tried using a PC to view the iPad as a HD, but it also does not find the images... yet I can visualize them!!!  I need to make sure I do not lose these pictures!!!!  How can I get them into my new computer?

    In iOS 7 you cannot transfer photos and videos anymore to or from your iPad as if it were a USB device.
    You must sync them using iTunes:
    http://support.apple.com/kb/HT1386

  • I recently connected my new MBA to an ACER display using the appropriate Apple hardware to connect to a VGA port. The quality of the ACER display is poor- the image is not clear. How do I achieve the same clarity of picture as my MBA screen?

    I recently connected my new MBA to an ACER display using the appropriate Apple hardware to connect to a VGA port. The quality of the ACER display is poor- the image is not clear. How do I achieve the same clarity of picture as my MBA screen?

    Welcome to the Apple Community.
    AirPlay Mirroring requires a second-generation Apple TV or later, OS X 10.8 or better and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer).
    On the basis of the specifications you have given for your set up, mirroring should work.

  • I am trying to import developed images from LightRoom 5 in o Photoshop 6.  I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, you do not have necessary access permissions or another progra

    I am trying to import developed images from LightRoom 5 Photoshop 6 for further editing.  I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, or you do not have necessary access permissions or another program is using the file.  Use the 'Properties' command in the Windows Explorer to unlock the file. How do I fix this?  I would greatly appreciate it if you would respond with terms and procedures that a computer ignorant user, such as me, will understand.   Thanks.

    Have you tried restoring the Preferences yet?

  • In an eMail message, when I attempt to save two photos by clicking the 'Save 2 Images' link, not the 'Save Image' link, the images are not saved. (I use I I apologize for the late notice, butOS7 on IPhone5). Is this feature broken?

    In an eMail message, when I attempt to save two photos by clicking the 'Save 2 Images' link, not the 'Save Image' link, the images are not saved. (I use I I apologize for the late notice, butOS7 on IPhone5). Is this feature broken?

    Please don't post the same question multiple times!

  • I am trying to import developed images from LightRoom 5 into Photoshop 6.  I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, you do not have necessary access permissions or another progra

    I am trying to import developed images from LightRoom 5 into Photoshop 6.  I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, you do not have necessary access permissions or another program is using the file.  Use the 'properties' command in the Windows Explorer to unlock the file'.  This has not happened before.  How do I change this?

    Could not open a scratch file because the file is locked or you do not have the necessary access privileges. (…) | Mylen…
    Mylenium

  • When I open Photoshop CS6, the image does not show in Photoshop. The image IS open, i.e. the filename is shown on a tab and the image layers show in the layer panel. What is going on?

    Both Photoshop and Bridge open as usual. But when I open an image, the image does not show in the image area. The image filename does show in a tab and the layers show in the layer panel. What is going on and how do I fix this.

    I resolved the problem. It was somehow related to my using Microsoft
    theme pictures. I set Windows to use the basic theme and the problem
    went away. Thank you for the suggestions.
    Jac

  • Final Cut Pro X (10.1.1) can't be opened because "the image is not recognized".

    I have tried to download the trail version of Final Cut Pro X (10.1.1) twice but every time it has been downloaded my computer tells me it can't be opened because "the image is not recognized".
    Do any of you have a similar problem or know a solution?

    Also having this issue, Im on OSX Yosimite 10.10.1 trying to download the 30 day trial version of Final Cut Pro 10.1.4
    MacBook Pro (13-inch, Early 2011)
    Processor: 2.3 GHz Intel Core i5
    Mem: 8 GB 1600 MHz DDR3
    I have downloaded the 30 day trial of Final Cut Pro from https://www.apple.com/ie/final-cut-pro/trial/
    The file which gets downloaded is "FinalCutProTrial10.1.4.dmg"
    The size of this file is 2,147,487,419 bytes (as viewed in the inspector)
    I would be interested to hear from anyone who installed this successfully whether the DMG file was the exact same size (although I have a feeling I wont hear anything as most people would delete the DMG file after installing).

  • In the Program Panel, when I click the Spacebar (i.e., "Play"), the image does not advance.

    In the Program Panel, when I click the Spacebar (i.e., "Play"), the image does not advance. When I click "Play" again (i.e., "Stop"), the still image confirms that we have moved on. Please, What must I do so that when I click the Spacebar (i.e., "Play"), the image does indeed advance? Thanks!

    This pertains to Adobe Premiere Pro CS6:
    Thanks for your prompt reply. This is my first post and I appreciate your patience. I imported media into the Project Panel. From there, I placed a few clips into a sequence in the Timeline. In the Timeline, I clicked on a clip. I then double clicked in Program Panel, and could then see the clip. However, when I click on the space bar, (i.e., "Play") in the Program Panel, the image in that panel does not advance. When I click "Play" again (i.e., "Stop"), the still image confirms that we have moved on a bit in the footage. (The audio plays normally, confirming that we are advancing in time. )
    I want to be able to press the space bar in the Program Panel and to see the "motion picture" in the Program Panel.
    Please, What must I do so that when I click the Spacebar (i.e., "Play") in the Program Panel, the image does indeed advance? Thanks!
    Not sure I yet have the capabibility of providing a URL of the problem. 
    Thanks for your guidance,
    David

  • Why the Image is not showing on Report at runtime?

    Post Author: azharrahi
    CA Forum: .NET
    I am working on a web site which was developed in ASP.Net 1.1. This web site also contains Crystal Reports version 9.
    Now I have loaded the web site in Visual Studio.net 2005 and hence in ASP.Net 2.0. Still the Crystal reports version is 9.
    Everything is ok and Crystal reports are showing data properly.
    But one thing is very strange and annoyable.i.e. When I insert image on Crystal Reports through right click-> Insert->Picture, the image is shown in the design time preview of report, but when I load the Crystal Report on .Net control CrystalReportViewer and run the application, the Image is not displayed. The problem becomes more strange when I Export the Crystal Report to PDF file and MS Excel. Strangely the Image is also exported there and is displayed. Whats the problem? Why Image is not displayed on the CrystalreportViewer of the form on run time and why on exporting to PDF file and MS Excel, it is displayed? Can any body tell me whats the problem behind of not displaying image on runtime?
    At least it means that Image is embeded and loaded on runtime. Only now viewing. Only a blank Picture box displayed.

    Post Author: Argan
    CA Forum: .NET
    A couple things can cause this.
    Right click on the red x to find out the name of the png file.  Search the web server for that png and make sure that the asp worker has access to it.
    The other is a image handler issue.  Search the kbase for Red X NET 2005 and you will find a kbase or two that addresses this.

  • I am using CS6 and when I go to save an image for Web the image does not retain its quality

    I am using CS6 and when I go to save an image for Web the image does not retain its quality. The first week I did this it worked just fine and now the images save very pixely.
    Here is a screenshot of my image on the artboard as I am editing it
    Here is a screenshot of the image as I'm trying to save it for Web
    As you can see, the image becomes pixely. I have tried to save it as every type of png and jpeg but nothing seems to work. I have no idea why it has started to do this. Please help!

    Change None to Art optimized then click apply(alteast in CS5 there was an apply, believe they removed that in CS6 as so many people missed that part).

  • When I upload photos, some of the images do not show, but appear as a dotted square. has anyone had this problem?

    when I upload photos, some of the images do not show, but appear as a dotted square. has anyone had this problem?

    Hi Terence, When I am uploading photos from a memory card,not all of the photos show up on I photo as a photo image, but show up as a dotted square line. For example, I just added 12 photo from two days. The first day had 5 photos, but only 4 show up as images, then there is 1 as dotted  a square. The next day, there 7 images, with only 4 showing up as photos, and three as the dotted squares.
    I am using I photo 11, 9.1.1.
    Thank you

  • The images did not convert

    The images did not convert.

    HI David,
    Have not tried to work with the SanDisk USB 2.0 Flash Drive since my email note.  Please know I want to save docs to a Flash Drive.
    Opened the tutorial (pdf) to password protect  -- tutorial very clear on how to proceed -- cannot open the file  (Õ!∏ LÕ!This program cannot be run in DOS mode).
    When I open the Adobe options to download, do not know which download to use -- believe it is Adobe Reader but cannot be sure.
    It must be clear to you I am not knowledgeable about how to proceed -- welcome your suggestions.
    Thanks,
    Margaret S. Mills

  • I'm using iphone 4s, whenever i take a photo using front camera mirror view of the image is NOT saved

    I'm using iphone 4s, whenever i take a photo using front camera mirror view of the image is NOT saved. i.e, left becomes right & vice versa. To elaborate if you take a photo with your left hand index finger on your left chin it shows up as though i'm holding my right hand index finger on my right chin. This was not the case initially, i suspect this happened after photoshop app. was installled. Can someone assist?

    Ok!! After checking couple of my friends phone i realise this is BY design!!.. i still don't understand the logic behind this though.Nevertheless this ain't a bug!!!

Maybe you are looking for

  • Please I Need A Help ,

    Hi , I Using Blackberry Curve 9220 ,  , I Buy This Blackberry From Someone , But I Do Not Know Him , And I Never Saw Him Again , So The Problem Is , Enterprise Activation Password , Where Can I Get The Activation Password ? I Really2 Need Help Here ,

  • Import process

    Hi Experts, I am new to MM & CIN. The existing process of my client in aspects of Import purchase are as follows: 1. Purchase order against import vendor 2. MIRO raised against Commissioner of Customs - Payment of Import duties. 3. MIGO 4. MIRO again

  • Read the LabVIEW help file

    Forgive me if this is remarkably simple answer. Id like to be able to read LabVIEW help file on my LapTOP which has no LV installed. If I can do this from, here as in this forum can it be done? Thanks

  • BPM-  ADF binding files architecture for ADF human taskflow.

    Hi, I wast to know what is the architecture behind the hundreds of the file generated for the BPM adf integration for the human taskflow. Is there any method of debugging why data coming to BPM human taskflow is not coming properly to ADF. I appeciat

  • Configuring Checkpoint() in DEV and Prod

    Hi Gurus, BPEL process has many java EmbedS with checkpoint() ( no java code) and want to configure to avoid the checkpoints being executed in the process in Production and keep them running in DEV. Is there any way to configure it ? Thanks, Carl