CMX / MSE 7.4 - Time-of-Day rule
With Cisco ISE, we can define time-based rules (example: if 2am, user Nancy can't connect via VPN using a non-corporate laptop).
With MSE, can we have a rule: if passenger walking through an airport between 4pm and 7pm, advertise the Happy Hour special for a restaurant in the terminal but don't advertise the special if it's after 7pm?
Thanks.
Refer to Rule section :
"...The Rules section allows the user to identify the specific set of devices to which the analytics are to be applied. To describe the subset of this data, parameterized rule types have been created. Therefore, the rule for Date presents the user with valid dates of devices in the database. The Time rule allows the user to specify any hour and minute within 24 hours that a device was detected. Path rules identify devices with possible start, finish, and intermediate points on a path. A number of rules together constitute a rule set..."
Source : link posted by Ravi
Similar Messages
-
Why does my MBP restart itself randomly several times a day? Something about a "Panic Report".
Ok so my MacBook Pro shuts itself down and restarts at least 4 times a day. Usually this happens when im away from my computer and its been idle or sleeping or whatever it does, however just 30 minutes ago this happened while i was using it and then it wouldnt restart it just kept showing the loading "apple" logo with loading bars comntinuously spinning... I had to shut it down manually and then it took an extra long time to load before finally loading to the user login page. Now generally... upon start up after this "panic" i will recieve a"Panic report" that says something aloong the lines of...
Interval Since Last Panic Report: 27841 sec Panics Since Last Report: 2 Anonymous UUID: 6EBC0F43-E7CB-480C-8D91-9EA7C74EEECC Wed Jun 5 01:28:29 2013 panic(cpu 0 caller 0xffffff80002c4794): Kernel trap at 0xffffff7f816c8e1f, type 14=page fault, registers: CR0: 0x0000000080010033, CR2: 0xffffff80d17a0628, CR3: 0x000000008a22e00d, CR4: 0x00000000001606e0 RAX: 0xffffff80d15621f8, RBX: 0xffffff80d1562000, RCX: 0x000000000003cb26, RDX: 0x0000000000000000 RSP: 0xffffff80ef4f3960, RBP: 0xffffff80ef4f3a40, RSI: 0x000000807e876986, RDI: 0xffffff80ef4f39d9 R8: 0x000000000000001f, R9: 0xffffffffffffff00, R10: 0xffffffffffffffdf, R11: 0x0000000000000000 R12: 0xffffff80d179e000, R13: 0x0000000000000000, R14: 0x0000000000000000, R15: 0xffffff80ef4f3960 RFL: 0x0000000000010286, RIP: 0xffffff7f816c8e1f, CS: 0x0000000000000008, SS: 0x0000000000000010 CR2: 0xffffff80d17a0628, Error code: 0x0000000000000000, Faulting CPU: 0x0 Backtrace (CPU 0), Frame : Return Address 0xffffff80ef4f3610 : 0xffffff8000220792 0xffffff80ef4f3690 : 0xffffff80002c4794 0xffffff80ef4f3840 : 0xffffff80002da55d 0xffffff80ef4f3860 : 0xffffff7f816c8e1f 0xffffff80ef4f3a40 : 0xffffff7f816e5c05 0xffffff80ef4f3a80 : 0xffffff7f816c7257 0xffffff80ef4f3ab0 : 0xffffff7f80c95832 0xffffff80ef4f3af0 : 0xffffff7f80c9593d 0xffffff80ef4f3b10 : 0xffffff7f80c9ecff 0xffffff80ef4f3b70 : 0xffffff7f80c9edc8 0xffffff80ef4f3b90 : 0xffffff7f80c9c138 0xffffff80ef4f3bb0 : 0xffffff7f80c9c4bc 0xffffff80ef4f3be0 : 0xffffff80006565fe 0xffffff80ef4f3c40 : 0xffffff8000656fbb 0xffffff80ef4f3d80 : 0xffffff80002a3f08 0xffffff80ef4f3e80 : 0xffffff8000223096 0xffffff80ef4f3eb0 : 0xffffff80002148a9 0xffffff80ef4f3f10 : 0xffffff800021bbd8 0xffffff80ef4f3f70 : 0xffffff80002aef10 0xffffff80ef4f3fb0 : 0xffffff80002daec3 Kernel Extensions in backtrace: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80c8a000->0xffffff7f80cc2fff dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80849000 com.apple.driver.AppleIntelHD4000Graphics(7.3.2)[AD64F3E5-2838-3046-A9EA-1CB6C9 769436]@0xffffff7f816c4000->0xffffff7f8172afff dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80849000 dependency: com.apple.iokit.IONDRVSupport(2.3.4)[7C8672C4-8B0D-3CCF-A79A-23C62E90F895]@0xff ffff7f80cc3000 dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80c8a000 BSD process name corresponding to current thread: WindowServer Mac OS version: 11G63 Kernel version: Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64 Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5 System model name: MacBookPro9,2 (Mac-6F01561E16C75D06) System uptime in nanoseconds: 5870204567267 last loaded kext at 49584802694: com.apple.driver.AppleMikeyHIDDriver 122 (addr 0xffffff7f8167a000, size 20480) last unloaded kext at 200341249727: com.apple.driver.AppleUSBTCKeyEventDriver 227.6 (addr 0xffffff7f814f7000, size 8192) loaded kexts: com.apple.driver.AppleMikeyHIDDriver 122 com.apple.driver.X86PlatformShim 5.0.0d8 com.apple.driver.AGPM 100.12.75 com.apple.driver.AppleHDA 2.2.5a5 com.apple.driver.AppleUpstreamUserClient 3.5.9 com.apple.driver.AudioAUUC 1.59 com.apple.driver.AppleMikeyDriver 2.2.5a5 com.apple.driver.AppleSMCLMU 2.0.1d2 com.apple.driver.AppleIntelHD4000Graphics 7.3.2 com.apple.driver.SMCMotionSensor 3.0.2d6 com.apple.driver.AppleSMCPDRC 5.0.0d8 com.apple.iokit.IOUserEthernet 1.0.0d1 com.apple.iokit.IOBluetoothSerialManager 4.0.8f17 com.apple.Dont_Steal_Mac_OS_X 7.0.0 com.apple.driver.AudioIPCDriver 1.2.3 com.apple.driver.ApplePolicyControl 3.1.33 com.apple.driver.AppleLPC 1.6.0 com.apple.driver.AppleBacklight 170.2.2 com.apple.driver.AppleMCCSControl 1.0.33 com.apple.driver.AppleIntelFramebufferCapri 7.3.2 com.apple.filesystems.autofs 3.0 com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.8f17 com.apple.driver.AppleUSBTCButtons 227.6 com.apple.driver.AppleUSBTCKeyboard 227.6 com.apple.driver.AppleIRController 312 com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1 com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1 com.apple.BootCache 33 com.apple.iokit.SCSITaskUserClient 3.2.1 com.apple.driver.XsanFilter 404 com.apple.iokit.IOAHCISerialATAPI 2.0.3 com.apple.iokit.IOAHCIBlockStorage 2.1.0 com.apple.driver.AppleSmartBatteryManager 161.0.0 com.apple.driver.AppleFWOHCI 4.9.0 com.apple.driver.AirPort.Brcm4331 561.7.22 com.apple.driver.AppleSDXC 1.2.2 com.apple.driver.AppleUSBHub 5.1.0 com.apple.iokit.AppleBCM5701Ethernet 3.2.4b8 com.apple.driver.AppleEFINVRAM 1.6.1 com.apple.driver.AppleAHCIPort 2.3.1 com.apple.driver.AppleUSBEHCI 5.1.0 com.apple.driver.AppleUSBXHCI 1.1.0 com.apple.driver.AppleACPIButtons 1.5 com.apple.driver.AppleRTC 1.5 com.apple.driver.AppleHPET 1.7 com.apple.driver.AppleSMBIOS 1.9 com.apple.driver.AppleACPIEC 1.5 com.apple.driver.AppleAPIC 1.6 com.apple.driver.AppleIntelCPUPowerManagementClient 195.0.0 com.apple.nke.applicationfirewall 3.2.30 com.apple.security.quarantine 1.4 com.apple.security.TMSafetyNet 8 com.apple.driver.AppleIntelCPUPowerManagement 195.0.0 com.apple.driver.DspFuncLib 2.2.5a5 com.apple.iokit.IOSurface 80.0.2 com.apple.iokit.IOSerialFamily 10.0.5 com.apple.iokit.IOFireWireIP 2.2.5 com.apple.iokit.IOAudioFamily 1.8.6fc18 com.apple.kext.OSvKernDSPLib 1.3 com.apple.driver.AppleHDAController 2.2.5a5 com.apple.iokit.IOHDAFamily 2.2.5a5 com.apple.driver.X86PlatformPlugin 5.1.1d6 com.apple.driver.AppleSMC 3.1.3d10 com.apple.driver.AppleSMBusPCI 1.0.10d0 com.apple.driver.IOPlatformPluginFamily 5.1.1d6 com.apple.driver.AppleGraphicsControl 3.1.33 com.apple.driver.AppleBacklightExpert 1.0.4 com.apple.iokit.IONDRVSupport 2.3.4 com.apple.driver.AppleSMBusController 1.0.10d0 com.apple.iokit.IOGraphicsFamily 2.3.4 com.apple.kext.triggers 1.0 com.apple.driver.AppleUSBBluetoothHCIController 4.0.8f17 com.apple.iokit.IOBluetoothFamily 4.0.8f17 com.apple.driver.AppleUSBMultitouch 230.5 com.apple.driver.AppleThunderboltDPInAdapter 1.8.5 com.apple.driver.AppleThunderboltDPAdapterFamily 1.8.5 com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.5 com.apple.iokit.IOUSBHIDDriver 5.0.0 com.apple.driver.AppleUSBMergeNub 5.1.0 com.apple.driver.AppleUSBComposite 5.0.0 com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.2.1 com.apple.iokit.IOBDStorageFamily 1.7 com.apple.iokit.IODVDStorageFamily 1.7.1 com.apple.iokit.IOCDStorageFamily 1.7.1 com.apple.iokit.IOSCSIArchitectureModelFamily 3.2.1 com.apple.driver.AppleThunderboltNHI 1.6.0 com.apple.iokit.IOThunderboltFamily 2.0.3 com.apple.iokit.IOFireWireFamily 4.4.8 com.apple.iokit.IO80211Family 420.3 com.apple.iokit.IOEthernetAVBController 1.0.1b1 com.apple.iokit.IONetworkingFamily 2.1 com.apple.iokit.IOUSBUserClient 5.0.0 com.apple.iokit.IOAHCIFamily 2.0.8 com.apple.iokit.IOUSBFamily 5.1.0 com.apple.driver.AppleEFIRuntime 1.6.1 com.apple.iokit.IOHIDFamily 1.7.1 com.apple.iokit.IOSMBusFamily 1.1 com.apple.security.sandbox 177.9 com.apple.kext.AppleMatch 1.0.0d1 com.apple.driver.DiskImages 331.7 com.apple.iokit.IOStorageFamily 1.7.2 com.apple.driver.AppleKeyStore 28.18 com.apple.driver.AppleACPIPlatform 1.5 com.apple.iokit.IOPCIFamily 2.7 com.apple.iokit.IOACPIFamily 1.4 Model: MacBookPro9,2, BootROM MBP91.00D3.B08, 2 processors, Intel Core i7, 2.9 GHz, 8 GB, SMC 2.2f38 Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In, 512 MB Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80CE, 0x4D34373142353237334448302D434B302020 Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80CE, 0x4D34373142353237334448302D434B302020 AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xF5), Broadcom BCM43xx 1.0 (5.106.198.19.22) Bluetooth: Version 4.0.8f17, 2 service, 18 devices, 1 incoming serial ports Network Service: Wi-Fi, AirPort, en1 Serial ATA Device: TOSHIBA MK7559GSXF, 750.16 GB Serial ATA Device: HL-DT-ST DVDRW GS31N USB Device: hub_device, 0x8087 (Intel Corporation), 0x0024, 0x1a100000 / 2 USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8509, 0x1a110000 / 3 USB Device: hub_device, 0x8087 (Intel Corporation), 0x0024, 0x1d100000 / 2 USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0x1d180000 / 3 USB Device: BRCM20702 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x1d181000 / 6 USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821d, 0x1d181300 / 9 USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0252, 0x1d183000 / 5 USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x1d182000 / 4
What the HECK is happening and whats causing this???? How do i fix it?That panic was not caused by third-party software. If the problem is recurrent, the possibilities are:
A stale or corrupt kernel cache
A damaged OS X installation
A fault in a peripheral device, if any
Corrupt non-volatile memory (NVRAM)
An internal hardware fault (including incompatible memory)
An obscure bug in OS X
You may already have ruled out some of these.
Rule out #1 by booting in safe mode and then rebooting as usual. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
You can rule out #2 and #3 by reinstalling the OS and testing with non-essential peripherals disconnected and aftermarket expansion cards removed, if applicable. Sometimes a clean reinstallation (after erasing the startup volume) may solve a problem that isn't solved by reinstalling in place, without erasing.
Corrupt NVRAM, which rarely causes panics, can be ruled out by resetting it.
If your model has user-replaceable memory, and you've upgraded the memory modules, reinstall the original memory and see whether there's any improvement. Be careful not to touch the gold contacts. Clean them with a mild solvent such as rubbing alcohol. Aftermarket memory must exactly match the technical specifications for your model. Memory that is either slower or faster than specified may be incompatible.
The Apple Hardware Test, though generally unreliable, will sometimes detect a fault. A negative test can't be depended on. Run the extended version of the test.
In the category of obscure bugs, reports suggest that FileVault may trigger kernel traps under some unknown conditions. Most, though not all, of these reports seem to involve booting from an aftermarket SSD. If those conditions apply to you, try deactivating FileVault.
Connecting more than one display is another reported trigger for OS X bugs.
In rare cases, a malformed network packet from a defective router or other network device can cause panics. Such packets could also be sent deliberately by a skillful attacker. This possibility is something to consider if you run a public server that might be the target of such an attack.
If none of the above applies, make a "Genius" appointment at an Apple Store to have the machine tested. You may have to leave it there for several days. There isn't much point in doing this unless you can reproduce the panic, or if you can't, it happens often enough that it's likely to be repeated at the store. Otherwise you may be told that nothing is wrong.
Print the first page of the panic report and bring it with you.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you know how to restore, and you have at least two independent backups.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
*An SSD doesn't need to be zeroed. -
Cisco RV120W crashed several times a day
Hello,
we are using the Cisco RV120W for our little network. The latest firmware (1.0.4.10) is installed!
But the router crashes about 6-10 times a day and have to be restarted. The Web Interface is also not available then.
It is configured as the subnet 192.168.12.0/24
The WAN connection is a static ip to a public subnet.
VLAN 1 is the default LAN (see above).
DHCP is enabled in that network and DNS proxy is disabled.
VLAN 2 is 192.168.10.12 whitout DHCP.
Ethernet Port 1 is configured as VLAN 2 for another subnet (192.168.10.0/24 from another router).
The other ports an WLAN are using VLAN 1 (192.168.12.0/24).
WLAN authentication is enabled (SSID 1) with a WPA2-PSK password.
After i reboot the router the logs are empty and i just can see the logs while the router is running.
after about 30 minutes i copied the logs from the router:
These are the "error" logs:
Sat Jan 1 01:02:17 2000(CET) [rv120w][System][NIMF] nimfNetIfaceTblHandler: unable to get LedPinId
Sat Jan 1 01:02:22 2000(CET) [rv120w][System][NIMF] nimfNetIfaceTblHandler: unable to get LedPinId
Sat Jan 1 01:02:37 2000(CET) [rv120w][System][NIMF] nimfNetIfaceTblHandler: unable to get LedPinId
Fri Aug 30 15:25:40 2013(CET) [rv120w][System][FIREWALL] fwPPTPGenericRules.c: inet_aton failed
Fri Aug 30 15:25:40 2013(CET) [rv120w][System][NIMF] nimfNetIfaceTblHandler: unable to get LedPinId
Fri Aug 30 15:25:57 2013(CET) [rv120w][System][NIMF] nimfNetIfaceTblHandler: unable to get LedPinId
Fri Aug 30 15:26:04 2013(CET) [rv120w][System][NIMF] nimfNetIfaceTblHandler: unable to get LedPinId
Fri Aug 30 15:26:15 2013(CET) [rv120w][System][NIMF] nimfNetIfaceTblHandler: unable to get LedPinId
Fri Aug 30 15:26:47 2013(CET) [rv120w][System][FIREWALL] fwPPTPGenericRules.c: inet_aton failed
Fri Aug 30 15:26:48 2013(CET) [rv120w][System][PLATFORM] [BONJOUR_ERROR]: DNSServiceProcessResult returned -65537 stopping listen to mdnsd
Fri Aug 30 15:26:51 2013(CET) [rv120w][System][PLATFORM] [BONJOUR_ERROR]: Signal Sent to bonjourClient Failed
Fri Aug 30 15:26:52 2013(CET) [rv120w][System][PLATFORM] [BONJOUR_ERROR]: DNSServiceProcessResult returned -65537 stopping listen to mdnsd
Fri Aug 30 15:26:54 2013(CET) [rv120w][System][PLATFORM] [BONJOUR_ERROR]: Signal Sent to bonjourClient Failed
Fri Aug 30 15:26:58 2013(CET) [rv120w][System][PLATFORM] [BONJOUR_ERROR]: Signal Sent to bonjourClient Failed
Fri Aug 30 15:27:00 2013(CET) [rv120w][Local0-wireless][UDOT11] wpaAuthRecvPTKMsg2: mic check failed
Fri Aug 30 15:27:01 2013(CET) [rv120w][Local0-wireless][UDOT11] wpaAuthRecvPTKMsg2: mic check failed
Fri Aug 30 15:27:01 2013(CET) [rv120w][System][PLATFORM] [BONJOUR_ERROR]: Signal Sent to bonjourClient Failed
Fri Aug 30 15:27:01 2013(CET) [rv120w][Local0-wireless][UDOT11] wpaAuthRecvPTKMsg2: mic check failed
Fri Aug 30 15:27:02 2013(CET) [rv120w][System][EVTDSPTCH] umiIoctl (43, UMI_CMD_DB_UPDATE(4)) failed. table=FirewallRules row=101
Fri Aug 30 15:27:27 2013(CET) [rv120w][Local0-wireless][UDOT11] wpaAuthRecvPTKMsg2: mic check failed
Fri Aug 30 15:27:28 2013(CET) [rv120w][Local0-wireless][UDOT11] wpaAuthRecvPTKMsg2: mic check failed
Fri Aug 30 15:27:28 2013(CET) [rv120w][Local0-wireless][UDOT11] wpaAuthRecvPTKMsg2: mic check failed
Fri Aug 30 15:27:52 2013(CET) [rv120w][System][FIREWALL] fwPPTPGenericRules.c: inet_aton failed
And these are the "warning" logs:
Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] CVMSEG size: 2 cache lines (256 bytes)
Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] CPU revision is: 000d0601
Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Determined physical RAM map:
Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] memory: 0000000003800000 @ 0000000000700000 (usable)
Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Built 1 zonelists. Total pages: 14116
Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Primary instruction cache 32kB, virtually tagged, 4 way, 64 sets, linesize 128 bytes.
Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Primary data cache 16kB, 64-way, 2 sets, linesize 128 bytes.
Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] PID hash table entries: 256 (order: 8, 2048 bytes)
Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Using 300.000 MHz high precision timer.
Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)
Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Calibrating delay using timer specific routine.. 600.35 BogoMIPS (lpj=1200701)
Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Mount-cache hash table entries: 256
Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Checking for the multiply/shift bug... no.
Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Checking for the daddi bug... no.
Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Checking for the daddiu bug... no.
Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Enabling Octeon big bar support
Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] PCI Status: PCI 32-bit
Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] IP route cache hash table entries: 512 (order: 0, 4096 bytes)
Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] TCP established hash table entries: 2048 (order: 3, 32768 bytes)
Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] /proc/octeon_perf: Octeon performace counter interface loaded
Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Total HugeTLB memory allocated, 0
Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] RAMDISK driver initialized: 1 RAM disks of 500000K size 1024 blocksize
Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] GACT probability NOT on
Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Mirror/redirect action on
Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] u32 classifier
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] Performance counters on
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] Actions configured
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack version 2.4 (224 buckets, 1792 max) - 352 bytes per conntrack
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack_rtsp v0.6.21 loading
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] ip_nat_rtsp v0.6.21 loading
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] ip_tables: (C) 2000-2006 Netfilter Core Team
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] netfilter PSD loaded - (c) astaro AG
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] ipt_time loading
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] Bootbus flash: Setting flash for 16MB flash at 0x1ec00000
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] Amd/Fujitsu Extended Query Table at 0x0040
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] phys_mapped_flash: CFI does not contain boot bank location. Assuming top.
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] cavium-ethernet: Cavium Networks Octeon SDK version 1.7.3, build 264
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] Register the sysctl for hardware offload succeed
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] Register the sysctl for flow cache succeed
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] Register the sysctl for brcm Tag succeed
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] Register the sysctl for vlan enabled succeed
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] Pool 0 size 2048 No 1024
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] Pool 1 size 128 No 1024
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] Pool 3 size 128 No 640
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] global cache allocation start 0
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] Ipforward global cache allocation sucessfull
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] Registerd the sysctl for IMP port status
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] Registerd the sysctl for 802.1x enabled port
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] Registerd the sysctl for blocking non EAP packets status
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] Interface 0 has 2 ports (GMII)
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] 996
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] 999
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] 1037
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] 1039
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] port ko 0
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] port ko 1
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] led module init...
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] umi: module license 'unspecified' taints kernel.
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] eth0: 100 Mbps Full duplex, port 0, queue 0
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] eth1: 100 Mbps Full duplex, port 1, queue 1
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] PF_key: Initialized Security Policy Database.
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] IPsec: Initialized Security Association Processing.
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] BUG: at kernel/softirq.c:138 local_bh_enable()
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] Call Trace:[<ffffffff80121150>][<ffffffff80121150>][<ffffffff8014b2e0>][<ffffffff802c58ec>][<c0000000002231ac>][<c000000000229460>][<c0000000001eea80>][<c000000000229eb4>][<ffffffff802c0a00>][<ffffffff8011ae80>][<ffffffff8011ae80>][<ffffffff801
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] HTB: quantum of class 10001 is big. Consider r2q change.
Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL]
<4>Intializing the 8021P-DSCP Remark Module
Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] Registerd the sysctl for _8021p task IMP portPCI: Enabling device 0000:00:03.0 (0000 -> 0002)
Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] vap0: Broadcom BCM432c 802.11 Wireless Controller 5.60.120.9
Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack_pptp version 3.1 loaded
Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] ip_nat_pptp version 3.0 loaded
Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] COEX: downgraded chanspec 0x2e09 to 0x2b0b: channel 5 used by exiting BSSs
Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] COEX: downgraded chanspec 0x2e0b to 0x2b0d: channel 6 used by exiting BSSs
Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] COEX: downgraded chanspec 0x2d03 to 0x2b01: channel 6 used by exiting BSSs
Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] COEX: downgraded chanspec 0x2e09 to 0x2b0b: channel 6 used by exiting BSSs
Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] COEX: downgraded chanspec 0x2e0b to 0x2b0d: channel 6 used by exiting BSSs
Sat Jan 1 01:01:51 2000(CET) [rv120w][System][PLATFORM] IPv6 not configured on the interface
Fri Aug 30 15:27:01 2013(CET) [rv120w][Kernel][KERNEL] ERROR:endChantRecv: protocol PNAC returned !OK
Fri Aug 30 15:27:01 2013(CET) [rv120w][Kernel][KERNEL] ERROR:endChantRecv: protocol PNAC returned !OK
Fri Aug 30 15:27:01 2013(CET) [rv120w][Kernel][KERNEL] ERROR:endChantRecv: protocol PNAC returned !OK
Fri Aug 30 15:27:06 2013(CET) [rv120w][Kernel][KERNEL] ERROR:endChantRecv: protocol PNAC returned !OK
Fri Aug 30 15:27:32 2013(CET) [rv120w][Kernel][KERNEL] ERROR:endChantRecv: protocol PNAC returned !OK
Fri Aug 30 15:27:32 2013(CET) [rv120w][Kernel][KERNEL] ERROR:endChantRecv: protocol PNAC returned !OK
Fri Aug 30 15:27:32 2013(CET) [rv120w][Kernel][KERNEL] ERROR:endChantRecv: protocol PNAC returned !OK
Fri Aug 30 15:27:32 2013(CET) [rv120w][Kernel][KERNEL] ERROR:endChantRecv: protocol PNAC returned !OK
hope you can help me!
EDIT: This is a log file from today in the morning:
[rv120w]Sat Jan 1 01:01:41 2000(CET) [rv120w][System][PLATFORM] platformHandleDBUpdate:system op=23 row=1
[rv120w]Sat Jan 1 01:01:43 2000(CET) [rv120w][System][PLATFORM] [BONJOUR_DEBUG]: Getting the results of Sql Query: SELECT value FROM environment WHERE name='BONJOUR_DEFAULT_SERVICE_NAME'
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][System][PLATFORM] [BONJOUR_DEBUG]: Performing SqlQry : UPDATE bonjourDefaultServices SET textRecord = 'model=RV120W;deviceType=Router;deviceDescr=Wireless-N-VPN-Router;slaves=0;fmVersion=1.0.4.10;PIDVID=RV12
W-E V01;MACAddress=00077D150BCA;serialNo=SER15320A9Q
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Linux version 2.6.21.7-Cavium-Octeon ([email protected]) (gcc version 4.1.2 (Cavium Networks Version: 1_6_0, build 34)) #1 Mon Jun 18 13:30:50 IST 2012
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] CVMSEG size: 2 cache lines (256 bytes)
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] CPU revision is: 000d0601
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Determined physical RAM map:
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] memory: 0000000003800000 @ 0000000000700000 (usable)
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Wasting 100352 bytes for tracking 1792 unused pages
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Initrd not found or empty - disabling initrd
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] On node 0 totalpages: 14336
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] DMA zone: 220 pages used for memmap
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] DMA zone: 0 pages reserved
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] DMA zone: 14116 pages, LIFO batch:3
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Normal zone: 0 pages used for memmap
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Built 1 zonelists. Total pages: 14116
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Kernel command line: bootoctlinux 0x3000200 mtdparts=phys_mapped_flash:512k(bootloader)ro,5632k(kernel),8704k(rootfs),1024k(data),128k(bootload-env) console=ttyS0,115200
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Primary instruction cache 32kB, virtually tagged, 4 way, 64 sets, linesize 128 bytes.
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Primary data cache 16kB, 64-way, 2 sets, linesize 128 bytes.
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Synthesized TLB refill handler (49 instructions).
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Synthesized TLB load handler fastpath (64 instructions).
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Synthesized TLB store handler fastpath (67 instructions).
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Synthesized TLB modify handler fastpath (64 instructions).
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] PID hash table entries: 256 (order: 8, 2048 bytes)
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Using 300.000 MHz high precision timer.
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Memory: 53600k/57344k available (3099k kernel code, 3688k reserved, 669k data, 1788k init, 0k highmem)
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Calibrating delay using timer specific routine.. 600.35 BogoMIPS (lpj=1200702)
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Mount-cache hash table entries: 256
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Checking for the multiply/shift bug... no.
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Checking for the daddi bug... no.
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Checking for the daddiu bug... no.
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] NET: Registered protocol family 16
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Enabling Octeon big bar support
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] PCI Status: PCI 32-bit
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] NET: Registered protocol family 2
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Time: MIPS clocksource has been installed.
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] IP route cache hash table entries: 512 (order: 0, 4096 bytes)
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] TCP established hash table entries: 2048 (order: 3, 32768 bytes)
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] TCP: Hash tables configured (established 2048 bind 2048)
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] TCP reno registered
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] /proc/octeon_perf: Octeon performace counter interface loaded
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] Total HugeTLB memory allocated, 0
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] squashfs: version 3.0 (2006/03/15) Phillip Lougher
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc.
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] io scheduler noop registered
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] io scheduler cfq registered (default)
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] RAMDISK driver initialized: 1 RAM disks of 500000K size 1024 blocksize
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] loop: loaded (max 8 devices)
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] PPP generic driver version 2.4.2
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] PPP BSD Compression module registered
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] MPPE/MPPC encryption/compression module registered
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] NET: Registered protocol family 24
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] slram: not enough parameters.
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] i2c /dev entries driver
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] GACT probability NOT on
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] Mirror/redirect action on
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] u32 classifier
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] Performance counters on
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] Actions configured
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack version 2.4 (224 buckets, 1792 max) - 352 bytes per conntrack
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack_rsh: registering helper for port #0: 514/TCP
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack_rsh: helper match ip 0.0.0.0:514-0.0.0.0:0
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack_rsh: helper match mask 0.0.0.0:64512-0.0.0.0:64512
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack_rtsp v0.6.21 loading
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] net/ipv4/netfilter/ip_conntrack_rtsp.c: ip_conntrack_rtsp_init: port #0: 554
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] ip_nat_rtsp v0.6.21 loading
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] ip_tables: (C) 2000-2006 Netfilter Core Team
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] ipt_account 0.1.7 : Piotr Gasid³o <[email protected]>, http://www.barbara.eu.org/~quaker/ipt_account/
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] netfilter PSD loaded - (c) astaro AG
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] ipt_time loading
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack_rpc_tcp: registering helper for port #0: 111/TCP
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack_rpc_tcp: helper match ip 0.0.0.0:0->0.0.0.0:111
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack_rpc_tcp: helper match mask 0.0.0.0:0->0.0.0.0:65535
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack_rpc_tcp: disabling Legato NetWorker support for port 0/TCP
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] ipt_rpc: registering match [rpc] for;
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] ipt_rpc: port 111 (UDP|TCP);
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack_rpc_udp: registering helper for port #0: 111/UDP
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack_rpc_udp: helper match ip 0.0.0.0:0->0.0.0.0:111
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack_rpc_udp: helper match mask 0.0.0.0:0->0.0.0.0:65535
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] TCP cubic registered
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] NET: Registered protocol family 1
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] NET: Registered protocol family 10
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] IPv6 over IPv4 tunneling driver
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] NET: Registered protocol family 17
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] 802.1Q VLAN Support v1.8 Ben Greear <[email protected]>
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] All bugs added by David S. Miller <[email protected]>
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] serial8250: ttyS0 at MMIO 0x1180000000800 (irq = 42) is a 16550A
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] Bootbus flash: Setting flash for 16MB flash at 0x1ec00000
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] phys_mapped_flash: Found 1 x16 devices at 0x0 in 8-bit bank
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] Amd/Fujitsu Extended Query Table at 0x0040
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] phys_mapped_flash: CFI does not contain boot bank location. Assuming top.
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] number of CFI chips: 1
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] 5 cmdlinepart partitions found on MTD device phys_mapped_flash
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] Creating 5 MTD partitions on "phys_mapped_flash":
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] 0x00000000-0x00080000 : "bootloader"
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] 0x00080000-0x00600000 : "kernel"
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] 0x00600000-0x00e80000 : "rootfs"
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] 0x00e80000-0x00f80000 : "data"
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] 0x00f80000-0x00fa0000 : "bootload-env"
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] Freeing unused kernel memory: 1788k freed
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] cavium-ethernet: Cavium Networks Octeon SDK version 1.7.3, build 264
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] Register the sysctl for hardware offload succeed
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] Register the sysctl for flow cache succeed
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] Register the sysctl for brcm Tag succeed
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] Register the sysctl for vlan enabled succeed
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] Pool 0 size 2048 No 1024
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] Pool 1 size 128 No 1024
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] Pool 3 size 128 No 640
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] global cache allocation start 0
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] Ipforward global cache allocation sucessfull
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] Registerd the sysctl for IMP port status
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] Registerd the sysctl for 802.1x enabled port
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] Registerd the sysctl for blocking non EAP packets status
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] Interface 0 has 2 ports (GMII)
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] 996
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] 999
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] 1037
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] 1039
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] port ko 0
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] port ko 1
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] led module init...
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] umi: module license 'unspecified' taints kernel.
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] NET: Registered protocol family 32
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] kernel UMI module loaded
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] eth0: 100 Mbps Full duplex, port 0, queue 0
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] eth1: 100 Mbps Full duplex, port 1, queue 1
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] Initializing PF_KEY V2 Key Management socket interface.
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] NET: Registered protocol family 15
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] PF_key: Started key_timehandler
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] PF_key: Initialized Security Policy Database.
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] IPsec: Initialized Security Association Processing.
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] XLR8 IPSec Framework Initialized
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] Software Backend Registered with XLR8 IPSec Framework
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] Adding AH4 protocol processing.
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] Adding ESP4 protocol processing.
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] Adding IPCOMP4 protocol processing.
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] Adding packet sink.
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] BUG: at kernel/softirq.c:138 local_bh_enable()
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] Call Trace:[<ffffffff80121150>][<ffffffff80121150>][<ffffffff8014b2e0>][<ffffffff802c58ec>][<c0000000002231ac>][<c000000000229460>][<c0000000001eea80>][<c000000000229eb4>][<ffffffff802c0a00>]
<ffffffff8011ae80>][<ffffffff8011ae80>][<ffffffff801
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] HTB: quantum of class 10001 is big. Consider r2q change.
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL]
<4>Intializing the 8021P-DSCP Remark Module
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] Registerd the sysctl for _8021p task IMP portPCI: Enabling device 0000:00:03.0 (0000 -> 0002)
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] vap0: Broadcom BCM432c 802.11 Wireless Controller 5.60.120.9
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] HDLC line discipline: version $Revision: 4.8 $, maxframe=4096
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] N_HDLC line discipline registered.
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] Loading mii
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] using bcm switch bcm5395
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] privlegedID 4094 wanporttNo: 5
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] eth1: no IPv6 routers present
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] eth0: no IPv6 routers present
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] Loading ifDev module
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack_pptp version 3.1 loaded
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] ip_nat_pptp version 3.0 loaded
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] COEX: downgraded chanspec 0x2e09 to 0x2b0b: channel 6 used by exiting BSSs
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] COEX: downgraded chanspec 0x2e0b to 0x2b0d: channel 6 used by exiting BSSs
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] COEX: downgraded chanspec 0x2e09 to 0x2b0b: channel 6 used by exiting BSSs
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] COEX: downgraded chanspec 0x2e0b to 0x2b0d: channel 6 used by exiting BSSs
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] vap0: no IPv6 routers present
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] IPsec: device down: eth0
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] device eth0 entered promiscuous mode
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] bdg1: port 1(eth0) entering learning state
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] device eth0 left promiscuous mode
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] bdg1: port 1(eth0) entering disabled state
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] eth0.1: add 33:33:00:00:00:01 mcast address to master interface
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] eth0.1: add 01:00:5e:00:00:01 mcast address to master interface
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] eth0.1: add 33:33:ff:15:0b:ca mcast address to master interface
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] eth0.1: del 33:33:ff:15:0b:ca mcast address from vlan interface
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] eth0.1: del 33:33:ff:15:0b:ca mcast address from master interface
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] eth0.1: del 01:00:5e:00:00:01 mcast address from vlan interface
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] eth0.1: del 01:00:5e:00:00:01 mcast address from master interface
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] eth0.1: del 33:33:00:00:00:01 mcast address from vlan interface
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] eth0.1: del 33:33:00:00:00:01 mcast address from master interface
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] IPsec: device down: eth0.1
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] device eth0.1 entered promiscuous mode
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] eth0.1: dev_set_promiscuity(master, 1)
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] device eth0 entered promiscuous mode
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] eth0.1: add 01:00:5e:00:00:01 mcast address to master interface
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] eth0.1: add 33:33:00:00:00:01 mcast address to master interface
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] eth0.1: add 33:33:ff:15:0b:ca mcast address to master interface
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] bdg1: port 1(eth0.1) entering learning state
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] IPsec: device down: vap0
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] device vap0 entered promiscuous mode
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] bdg1: port 2(vap0) entering learning state
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] eth0.2: add 33:33:00:00:00:01 mcast address to master interface
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] eth0.2: add 01:00:5e:00:00:01 mcast address to master interface
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] eth0.2: add 33:33:ff:15:0b:ca mcast address to master interface
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] eth0.2: del 33:33:ff:15:0b:ca mcast address from vlan interface
[rv120w]Sat Jan 1 01:01:48 2000(CET) [rv120w][Kernel][KERNEL] eth0.2: del 33:33:ff:15:0b:ca mcast address from master interface
[rv120w]Sat Jan 1 01:01:48 2000(CET) [rv120w][Kernel][KERNEL] eth0.2: del 01:00:5e:00:00:01 mcast address from vlan interface
[rv120w]Sat Jan 1 01:01:48 2000(CET) [rv120w][Kernel][KERNEL] eth0.2: del 01:00:5e:00:00:01 mcast address from master interface
[rv120w]Sat Jan 1 01:01:48 2000(CET) [rv120w][Kernel][KERNEL] eth0.2: del 33:33:00:00:00:01 mcast address from vlan interface
[rv120w]Sat Jan 1 01:01:48 2000(CET) [rv120w][Kernel][KERNEL] eth0.2: del 33:33:00:00:00:01 mcast address from master interface
[rv120w]Sat Jan 1 01:01:48 2000(CET) [rv120w][Kernel][KERNEL] IPsec: device down: eth0.2
[rv120w]Sat Jan 1 01:01:48 2000(CET) [rv120w][Kernel][KERNEL] eth0.2: dev_set_promiscuity(master, 1)
[rv120w]Sat Jan 1 01:01:48 2000(CET) [rv120w][Kernel][KERNEL] eth0.2: add 01:00:5e:00:00:01 mcast address to master interface
[rv120w]Sat Jan 1 01:01:48 2000(CET) [rv120w][Kernel][KERNEL] eth0.2: add 33:33:00:00:00:01 mcast address to master interface
[rv120w]Sat Jan 1 01:01:48 2000(CET) [rv120w][Kernel][KERNEL] eth0.2: add 33:33:ff:15:0b:ca mcast address to master interface
[rv120w]Sat Jan 1 01:01:48 2000(CET) [rv120w][Kernel][KERNEL] bdg2: port 1(eth0.2) entering learning state
[rv120w]Sat Jan 1 01:01:48 2000(CET) [rv120w][Kernel][KERNEL] bdg1: no IPv6 routers present
[rv120w]Sat Jan 1 01:01:48 2000(CET) [rv120w][Kernel][KERNEL] bdg2: no IPv6 routers present
[rv120w]Sat Jan 1 01:01:49 2000(CET) [rv120w][Kernel][KERNEL] eth0: no IPv6 routers present
[rv120w]Sat Jan 1 01:01:49 2000(CET) [rv120w][Kernel][KERNEL] vap0: no IPv6 routers present
[rv120w]Sat Jan 1 01:01:49 2000(CET) [rv120w][Kernel][KERNEL] eth0.2: no IPv6 routers present
[rv120w]Sat Jan 1 01:01:49 2000(CET) [rv120w][Kernel][KERNEL] eth0.1: no IPv6 routers present
[rv120w]Sat Jan 1 01:01:49 2000(CET) [rv120w][Kernel][KERNEL] bdg1: topology change detected, propagating
[rv120w]Sat Jan 1 01:01:49 2000(CET) [rv120w][Kernel][KERNEL] bdg1: port 1(eth0.1) entering forwarding state
[rv120w]Sat Jan 1 01:01:49 2000(CET) [rv120w][Kernel][KERNEL] bdg1: topology change detected, propagating
[rv120w]Sat Jan 1 01:01:49 2000(CET) [rv120w][Kernel][KERNEL] bdg1: port 2(vap0) entering forwarding state
[rv120w]Sat Jan 1 01:01:49 2000(CET) [rv120w][Kernel][KERNEL] bdg2: topology change detected, propagating
[rv120w]Sat Jan 1 01:01:49 2000(CET) [rv120w][Kernel][KERNEL] bdg2: port 1(eth0.2) entering forwarding state
[rv120w]Sat Jan 1 01:01:49 2000(CET) [rv120w][System][FIREWALL] ____/pfrm2.0/bin/ipset -A webFltr 192.168.10.12___
[rv120w]Sat Jan 1 01:01:49 2000(CET) [rv120w][System][FIREWALL] restartStatus = 0 for LogicalIfName = LAN2
[rv120w]Sat Jan 1 01:01:52 2000(CET) [rv120w][System][PLATFORM] IPv6 not configured on the interface
[rv120w]Sat Jan 1 01:01:53 2000(CET) [rv120w][System][PLATFORM] platformHandleDBUpdate:ipAddressTable op=18 row=5
[rv120w]Sat Jan 1 01:01:53 2000(CET) [rv120w][System][PLATFORM] pptpdMgmtDBUpdateHandler:DBUpdate event: Table: ipAddressTable opCode:18 rowId:5
[rv120w]Sat Jan 1 01:01:53 2000(CET) [rv120w][System][PLATFORM] options.pptpd file found
[rv120w]Sat Jan 1 01:01:54 2000(CET) [rv120w][System][PLATFORM] upnpMgmtDBUpdateHandler:DBUpdate event: Table: ipAddressTable opCode:18 rowId:5
[rv120w]Sat Jan 1 01:01:54 2000(CET) [rv120w][Kernel][KERNEL] manufacturingCo uses obsolete (PF_INET,SOCK_PACKET)
[rv120w]Sat Jan 1 01:01:54 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack: table full, dropping packet.
[rv120w]Sat Jan 1 01:01:54 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack: table full, dropping packet.
[rv120w]Sat Jan 1 01:01:54 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack: table full, dropping packet.
[rv120w]Sat Jan 1 01:01:54 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack: table full, dropping packet.
[rv120w]Sat Jan 1 01:01:54 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack: table full, dropping packet.
[rv120w]Sat Jan 1 01:01:54 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack: table full, dropping packet.
[rv120w]Sat Jan 1 01:01:54 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack: table full, dropping packet.
[rv120w]Sat Jan 1 01:01:54 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack: table full, dropping packet.
[rv120w]Sat Jan 1 01:01:54 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack: table full, dropping packet.
[rv120w]Sat Jan 1 01:01:54 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack: table full, dropping packet.
[rv120w]Sat Jan 1 01:01:55 2000(CET) [rv120w][System][PLATFORM] platformHandleDBUpdate:networkInterface op=18 row=9
[rv120w]Sat Jan 1 01:01:55 2000(CET) [rv120w][System][PLATFORM] pptpdMgmtDBUpdateHandler:DBUpdate event: Table: networkInterface opCode:18 rowId:9
[rv120w]Sat Jan 1 01:01:55 2000(CET) [rv120w][System][PLATFORM] options.pptpd file found
[rv120w]Sat Jan 1 01:01:56 2000(CET) [rv120w][System][PLATFORM] upnpMgmtDBUpdateHandler:DBUpdate event: Table: networkInterface opCode:18 rowId:9
[rv120w]Sat Jan 1 01:01:56 2000(CET) [rv120w][System][PLATFORM] igmpMgmtDBUpdateHandler: update received: Table: networkInterface opCode: 18 rowId: 9
[rv120w]Sat Jan 1 01:01:56 2000(CET) [rv120w][System][PLATFORM] igmpDisable: failed to disable IGMP proxy. IGMP proxy may not be running at all!
[rv120w]Sat Jan 1 01:01:57 2000(CET) [rv120w][System][PLATFORM] Disabling Firewall Rule for DHCP Relay Protocol
[rv120w]Sat Jan 1 01:01:57 2000(CET) [rv120w][System][PLATFORM] ddnsMgmtDBUpdateHandler:DBUpdate event: Table: networkInterface opCode:18 rowId:9
[rv120w]Sat Jan 1 01:01:58 2000(CET) [rv120w][System][FIREWALL] ____/pfrm2.0/bin/ipset -D webFltr 0.0.0.0___
[rv120w]Sat Jan 1 01:01:58 2000(CET) [rv120w][System][FIREWALL] ____/pfrm2.0/bin/ipset -A webFltr 192.168.12.1___
[rv120w]Sat Jan 1 01:01:58 2000(CET) [rv120w][System][FIREWALL] restartStatus = 1 for LogicalIfName = LAN
[rv120w]Sat Jan 1 01:01:58 2000(CET) [rv120w][System][FIREWALL] Restarting Firewall For LAN Address Update from 0.0.0.0:192.168.12.1
[rv120w]Sat Jan 1 01:01:59 2000(CET) [rv120w][System][PLATFORM] platformHandleDBUpdate:ipAddressTable op=23 row=1
[rv120w]Sat Jan 1 01:01:59 2000(CET) [rv120w][System][PLATFORM] pptpdMgmtDBUpdateHandler:DBUpdate event: Table: ipAddressTable opCode:23 rowId:1
[rv120w]Sat Jan 1 01:01:59 2000(CET) [rv120w][System][PLATFORM] options.pptpd file found
[rv120w]Sat Jan 1 01:01:59 2000(CET) [rv120w][Kernel][KERNEL] printk: 30 messages suppressed.
[rv120w]Sat Jan 1 01:01:59 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack: table full, dropping packet.
[rv120w]Sat Jan 1 01:01:59 2000(CET) [rv120w][System][PLATFORM] upnpMgmtDBUpdateHandler:DBUpdate event: Table: ipAddressTable opCode:23 rowId:1
[rv120w]Sat Jan 1 01:02:01 2000(CET) [rv120w][System][FIREWALL] ____/pfrm2.0/bin/ipset -D webFltr 192.168.12.1___
[rv120w]Sat Jan 1 01:02:01 2000(CET) [rv120w][System][FIREWALL] ____/pfrm2.0/bin/ipset -A webFltr 192.168.12.1___
[rv120w]Sat Jan 1 01:02:01 2000(CET) [rv120w][System][FIREWALL] restartStatus = 1 for LogicalIfName = LAN
[rv120w]Sat Jan 1 01:02:01 2000(CET) [rv120w][System][PLATFORM] platformHandleDBUpdate:ipAddressTable op=23 row=1
[rv120w]Sat Jan 1 01:02:01 2000(CET) [rv120w][System][PLATFORM] pptpdMgmtDBUpdateHandler:DBUpdate event: Table: ipAddressTable opCode:23 rowId:1
[rv120w]Sat Jan 1 01:02:01 2000(CET) [rv120w][System][PLATFORM] options.pptpd file found
[rv120w]Sat Jan 1 01:02:01 2000(CET) [rv120w][System][PLATFORM] upnpMgmtDBUpdateHandler:DBUpdate event: Table: ipAddressTable opCode:23 rowId:1
[rv120w]Sat Jan 1 01:02:03 2000(CET) [rv120w][System][FIREWALL] restartStatus = 1 for LogicalIfName = WAN1
[rv120w]Sat Jan 1 01:02:03 2000(CET) [rv120w][System][FIREWALL] Restarting Firewall For WAN1 Address Update from 0.0.0.0:193.158.228.75
[rv120w]Sat Jan 1 01:02:03 2000(CET) [rv120w][System][PLATFORM] platformHandleDBUpdate:ipAddressTable op=23 row=2
[rv120w]Sat Jan 1 01:02:03 2000(CET) [rv120w][System][PLATFORM] pptpdMgmtDBUpdateHandler:DBUpdate event: Table: ipAddressTable opCode:23 rowId:2
[rv120w]Sat Jan 1 01:02:04 2000(CET) [rv120w][System][PLATFORM] options.pptpd file found
[rv120w]Sat Jan 1 01:02:04 2000(CET) [rv120w][System][PLATFORM] upnpMgmtDBUpdateHandler:DBUpdate event: Table: ipAddressTable opCode:23 rowId:2
[rv120w]Sat Jan 1 01:02:04 2000(CET) [rv120w][Kernel][KERNEL] printk: 29 messages suppressed.
[rv120w]Sat Jan 1 01:02:04 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack: table full, dropping packet.
[rv120w]Sat Jan 1 01:02:05 2000(CET) [rv120w][System][FIREWALL] ____/pfrm2.0/bin/ipset -D webFltr 192.168.2.1___
[rv120w]Sat Jan 1 01:02:05 2000(CET) [rv120w][System][FIREWALL] ____/pfrm2.0/bin/ipset -A webFltr 192.168.10.12___
[rv120w]Sat Jan 1 01:02:06 2000(CET) [rv120w][System][FIREWALL] restartStatus = 0 for LogicalIfName = LAN2
[rv120w]Sat Jan 1 01:02:06 2000(CET) [rv120w][System][PLATFORM] platformHandleDBUpdate:ipAddressTable op=23 row=5
[rv120w]Sat Jan 1 01:02:06 2000(CET) [rv120w][System][PLATFORM] pptpdMgmtDBUpdateHandler:DBUpdate event: Table: ipAddressTable opCode:23 rowId:5
[rv120w]Sat Jan 1 01:02:06 2000(CET) [rv120w][System][PLATFORM] options.pptpd file found
[rv120w]Sat Jan 1 01:02:06 2000(CET) [rv120w][System][PLATFORM] upnpMgmtDBUpdateHandler:DBUpdate event: Table: ipAddressTable opCode:23 rowId:5
[rv120w]Sat Jan 1 01:02:08 2000(CET) [rv120w][System][FIREWALL] ____/pfrm2.0/bin/ipset -D webFltr 192.168.10.12___
[rv120w]Sat Jan 1 01:02:08 2000(CET) [rv120w][System][FIREWALL] ____/pfrm2.0/bin/ipset -A webFltr 192.168.10.12___
[rv120w]Sat Jan 1 01:02:08 2000(CET) [rv120w][System][FIREWALL] restartStatus = 0 for LogicalIfName = LAN2
[rv120w]Sat Jan 1 01:02:08 2000(CET) [rv120w][System][PLATFORM] platformHandleDBUpdate:ipAddressTable op=23 row=5
[rv120w]Sat Jan 1 01:02:08 2000(CET) [rv120w][System][PLATFORM] pptpdMgmtDBUpdateHandler:DBUpdate event: Table: ipAddressTable opCode:23 rowId:5
[rv120w]Sat Jan 1 01:02:08 2000(CET) [rv120w][System][PLATFORM] options.pptpd file found
[rv120w]Sat Jan 1 01:02:08 2000(CET) [rv120w][System][PLATFORM] upnpMgmtDBUpdateHandler:DBUpdate event: Table: ipAddressTable opCode:23 rowId:5
[rv120w]Sat Jan 1 01:02:09 2000(CET) [rv120w][Kernel][KERNEL] printk: 56 messages suppressed.
[rv120w]Sat Jan 1 01:02:09 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack: table full, dropping packet.
[rv120w]Sat Jan 1 01:02:10 2000(CET) [rv120w][System][PLATFORM] platformHandleDBUpdate:dhcpCfgLoad op=23 row=1
[rv120w]Sat Jan 1 01:02:10 2000(CET) [rv120w][System][PLATFORM] platformHandleDBUpdate:resolverConfig op=23 row=2
[rv120w]Sat Jan 1 01:02:13 2000(CET) [rv120w][System][PLATFORM] platformHandleDBUpdate:resolverConfig op=23 row=2
[rv120w]Sat Jan 1 01:02:14 2000(CET) [rv120w][Kernel][KERNEL] printk: 66 messages suppressed.
[rv120w]Sat Jan 1 01:02:14 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack: table full, dropping packet.
[rv120w]Sat Jan 1 01:02:16 2000(CET) [rv120w][System][FIREWALL] restartStatus = 1 for LogicalIfName = WAN1
[rv120w]Sat Jan 1 01:02:16 2000(CET) [rv120w][System][PLATFORM] platformHandleDBUpdate:ipAddressTable op=23 row=2
[rv120w]Sat Jan 1 01:02:16 2000(CET) [rv120w][System][PLATFORM] pptpdMgmtDBUpdateHandler:DBUpdate event: Table: ipAddressTable opCode:23 rowId:2
[rv120w]Sat Jan 1 01:02:17 2000(CET) [rv120w][System][PLATFORM] options.pptpd file found
[rv120w]Sat Jan 1 01:02:17 2000(CET) [rv120w][System][PLATFORM] upnpMgmtDBUpdateHandler:DBUpdate event: Table: ipAddressTable opCode:23 rowId:2
[rv120w]Sat Jan 1 01:02:18 2000(CET) [rv120w][System][NIMF] Setting LED [0]:[1] For WAN1
[rv120w]Sat Jan 1 01:02:18 2000(CET) [rv120w][System][NIMF] nimfNetIfaceTblHandler: unable to get LedPinId
[rv120w]Sat Jan 1 01:02:18 2000(CET) [rv120w][System][PLATFORM] platformHandleDBUpdate:networkInterface op=23 row=3
[rv120w]Sat Jan 1 01:02:19 2000(CET) [rv120w][Kernel][KERNEL] printk: 50 messages suppressed.
[rv120w]Sat Jan 1 01:02:19 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack: table full, dropping packet.
[rv120w]Sat Jan 1 01:02:20 2000(CET) [rv120w][System][PLATFORM] pptpdMgmtDBUpdateHandler:DBUpdate event: Table: networkInterface opCode:23 rowId:3
[rv120w]Sat Jan 1 01:02:20 2000(CET) [rv120w][System][PLATFORM] options.pptpd file found
[rv120w]Sat Jan 1 01:02:21 2000(CET) [rv120w][System][PLATFORM] upnpMgmtDBUpdateHandler:DBUpdate event: Table: networkInterface opCode:23 rowId:3
[rv120w]Sat Jan 1 01:02:21 2000(CET) [rv120w][System][PLATFORM] igmpMgmtDBUpdateHandler: update received: Table: networkInterface opCode: 23 rowId: 3
[rv120w]Sat Jan 1 01:02:22 2000(CET) [rv120w][System][PLATFORM] igmpDisable: failed to disable IGMP proxy. IGMP proxy may not be running at all!
[rv120w]Sat Jan 1 01:02:22 2000(CET) [rv120w][System][PLATFORM] Disabling Firewall Rule for DHCP Relay Protocol
[rv120w]Sat Jan 1 01:02:22 2000(CET) [rv120w][System][PLATFORM] ddnsMgmtDBUpdateHandler:DBUpdate event: Table: networkInterface opCode:23 rowId:3
[rv120w]Sat Jan 1 01:02:23 2000(CET) [rv120w][System][FIREWALL] Restarting Firewall [0]:[1] For WAN1
[rv120w]Sat Jan 1 01:02:23 2000(CET) [rv120w][System][NIMF] Setting LED [0]:[1] For WAN1
[rv120w]Sat Jan 1 01:02:23 2000(CET) [rv120w][System][NIMF] nimfNetIfaceTblHandler: unable to get LedPinId
[rv120w]Sat Jan 1 01:02:23 2000(CET) [rv120w][System][PLATFORM] platformHandleDBUpdate:networkInterface op=23 row=3
[rv120w]Sat Jan 1 01:02:24 2000(CET) [rv120w][Kernel][KERNEL] printk: 85 messages suppressed.
[rv120w]Sat Jan 1 01:02:24 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack: table full, dropping packet.
[rv120w]Sat Jan 1 01:02:25 2000(CET) [rv120w][System][PLATFORM] pptpdMgmtDBUpdateHandler:DBUpdate event: Table: networkInterface opCode:23 rowId:3
[rv120w]Sat Jan 1 01:02:25 2000(CET) [rv120w][System][PLATFORM] options.pptpd file found
[rv120w]Sat Jan 1 01:02:26 2000(CET) [rv120w][System][PLATFORM] upnpMgmtDBUpdateHandler:DBUpdate event: Table: networkInterface opCode:23 rowId:3
[rv120w]Sat Jan 1 01:02:26 2000(CET) [rv120w][System][PLATFORM] igmpMgmtDBUpdateHandler: update received: Table: networkInterface opCode: 23 rowId: 3
[rv120w]Sat Jan 1 01:02:26 2000(CET) [rv120w][System][PLATFORM] igmpDisable: failed to disable IGMP proxy. IGMP proxy may not be running at all!
[rv120w]Sat Jan 1 01:02:27 2000(CET) [rv120w][System][PLATFORM] Disabling Firewall Rule for DHCP Relay Protocol
[rv120w]Sat Jan 1 01:02:27 2000(CET) [rv120w][System][PLATFORM] ddnsMgmtDBUpdateHandler:DBUpdate event: Table: networkInterface opCode:23 rowId:3
[rv120w]Sat Jan 1 01:02:28 2000(CET) [rv120w][System][FIREWALL] Restarting Firewall [0]:[1] For WAN1
[rv120w]Sat Jan 1 01:02:28 2000(CET) [rv120w][System][PLATFORM] platformHandleDBUpdate:NimfAFStatus op=23 row=1
[rv120w]Sat Jan 1 01:02:28 2000(CET) [rv120w][System][PLATFORM] ddnsMgmtDBUpdateHandler:DBUpdate event: Table: NimfAFStatus opCode:23 rowId:1
[rv120w]Sat Jan 1 01:02:28 2000(CET) [rv120w][System][PLATFORM] platformHandleDBUpdate:resolverConfig op=23 row=2
[rv120w]Sat Jan 1 01:02:29 2000(CET) [rv120w][Kernel][KERNEL] printk: 115 messages suppressed.
[rv120w]Sat Jan 1 01:02:29 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack: table full, dropping packet.
[rv120w]Sat Jan 1 01:02:31 2000(CET) [rv120w][System][PLATFORM] platformHandleDBUpdate:resolverConfig op=23 row=2
[rv120w]Sat Jan 1 01:02:34 2000(CET) [rv120w][Kernel][KERNEL] printk: 133 messages suppressed.
[rv120w]Sat Jan 1 01:02:34 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack: table full, dropping packet.
[rv120w]Sat Jan 1 01:02:35 2000(CET) [rv120w][System][FIREWALL] restartStatus = 1 for LogicalIfName = WAN1
[rv120w]Sat Jan 1 01:02:35 2000(CET) [rv120w][System][FIREWALL] Restarting Firewall For WAN1 Address Update from 0.0.0.0:193.158.228.75
[rv120w]Sat Jan 1 01:02:35 2000(CET) [rv120w][System][PLATFORM] platformHandleDBUpdate:ipAddressTable op=23 row=2
[rv120w]Sat Jan 1 01:02:35 2000(CET) [rv120w][System][PLATFORM] pptpdMgmtDBUpdateHandler:DBUpdate event: Table: ipAddressTable opCode:23 rowId:2
[rv120w]Sat Jan 1 01:02:35 2000(CET) [rv120w][System][PLATFORM] options.pptpd file found
[rv120w]Sat Jan 1 01:02:35 2000(CET) [rv120w][System][PLATFORM] upnpMgmtDBUpdateHandler:DBUpdate event: Table: ipAddressTable opCode:23 rowId:2
[rv120w]Sat Jan 1 01:02:37 2000(CET) [rv120w][System][NIMF] Setting LED [0]:[1] For WAN1
[rv120w]Sat Jan 1 01:02:37 2000(CET) [rv120w][System][NIMF] nimfNetIfaceTblHandler: unable to get LedPinId
[rv120w]Sat Jan 1 01:02:37 2000(CET) [rv120w][System][PLATFORM] platformHandleDBUpdate:networkInterface op=23 row=3
[rv120w]Sat Jan 1 01:02:39 2000(CET) [rv120w][System][PLATFORM] pptpdMgmtDBUpdateHandler:DBUpdate event: Table: networkInterface opCode:23 rowId:3
[rv120w]Sat Jan 1 01:02:39 2000(CET) [rv120w][System][PLATFORM] options.pptpd file found
[rv120w]Sat Jan 1 01:02:39 2000(CET) [rv120w][Kernel][KERNEL] printk: 133 messages suppressed.
[rv120w]Sat Jan 1 01:02:39 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack: table full, dropping packet.
[rv120w]Sat Jan 1 01:02:40 2000(CET) [rv120w][System][PLATFORM] upnpMgmtDBUpdateHandler:DBUpdate event: Table: networkInterface opCode:23 rowId:3
[rv120w]Sat Jan 1 01:02:41 2000(CET) [rv120w][System][PLATFORM] igmpMgmtDBUpdateHandler: update received: Table: networkInterface opCode: 23 rowId: 3
[rv120w]Sat Jan 1 01:02:41 2000(CET) [rv120w][System][PLATFORM] igmpDisable: failed to disable IGMP proxy. IGMP proxy may not be running at all!
[rv120w]Sat Jan 1 01:02:41 2000(CET) [rv120w][System][PLATFORM] Disabling Firewall Rule for DHCP Relay Protocol
[rv120w]Sat Jan 1 01:02:42 2000(CET) [rv120w][System][PLATFORM] ddnsMgmtDBUpdateHandler:DBUpdate event: Table: networkInterface opCode:23 rowId:3
[rv120w]Sat Jan 1 01:02:49 2000(CET) [rv120w][Kernel][KERNEL] printk: 96 messages suppressed.
[rv120w]Sat Jan 1 01:02:49 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack: table full, dropping packet.
[rv120w]Sat Jan 1 01:02:49 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack: table full, dropping packet.
[rv120w]Sat Jan 1 01:02:54 2000(CET) [rv120w][Kernel][KERNEL] printk: 30 messages suppressed.
[rv120w]Sat Jan 1 01:02:54 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack: table full, dropping packet.
[rv120w]Sat Jan 1 01:03:00 2000(CET) [rv120w][Kernel][KERNEL] printk: 33 messages suppressed.
[rv120w]Sat Jan 1 01:03:00 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack: table full, dropping packet.
[rv120w]Sat Jan 1 01:03:00 2000(CET) [rv120w][System][FIREWALL] Enabling Attack Check for 0
[rv120w]Sat Jan 1 01:03:00 2000(CET) [rv120w][System][FIREWALL] Enabling Attack Check for 1
[rv120w]Sat Jan 1 01:03:00 2000(CET) [rv120w][System][FIREWALL] Enabling Attack Check for 2
[rv120w]Sat Jan 1 01:03:00 2000(CET) [rv120w][System][FIREWALL] Enabling Attack Check for 3
[rv120w]Sat Jan 1 01:03:00 2000(CET) [rv120w][System][FIREWALL] Enabling Attack Check for 4
[rv120w]Sat Jan 1 01:03:00 2000(CET) [rv120w][System][FIREWALL] Enabling Attack Check for 5
[rv120w]Sat Jan 1 01:03:00 2000(CET) [rv120w][System][FIREWALL] Enabling Attack Check for 6
[rv120w]Sat Jan 1 01:03:00 2000(CET) [rv120w][System][FIREWALL] Enabling ICSA Notification Item 0
[rv120w]Sat Jan 1 01:03:00 2000(CET) [rv120w][System][FIREWALL] Enabling Management Access from Internet to port 8200
[rv120w]Sat Jan 1 01:03:00 2000(CET) [rv120w][System][FIREWALL] Disabling Source MAC Filtering
[rv120w]Sat Jan 1 01:03:00 2000(CET) [rv120w][System][FIREWALL] Adding MAC Filter Policy for Block & Permit Rest
[rv120w]Sat Jan 1 01:03:00 2000(CET) [rv120w][System][FIREWALL] Restarting Source MAC Address Policy
[rv120w]Sat Jan 1 01:03:00 2000(CET) [rv120w][System][FIREWALL] Enabling DOS Attacks
[rv120w]Sat Jan 1 01:03:03 2000(CET) [rv120w][System][FIREWALL] fwPPTPGenericRules.c: inet_aton failed
[rv120w]Sat Jan 1 01:03:03 2000(CET) [rv120w][System][FIREWALL] Restarting Firewall [0]:[1] For WAN1
[rv120w]Sat Jan 1 01:03:03 2000(CET) [rv120w][System][NIMF] Setting LED [0]:[1] For WAN1
[rv120w]Sat Jan 1 01:03:03 2000(CET) [rv120w][System][NIMF] nimfNetIfaceTblHandler: unable to get LedPinId
[rv120w]Sat Jan 1 01:03:03 2000(CET) [rv120w][System][PLATFORM] platformHandleDBUpdate:networkInterface op=23 row=3
[rv120w]Sat Jan 1 01:03:05 2000(CET) [rv120w][Kernel][KERNEL] printk: 102 messages suppressed.
[rv120w]Sat Jan 1 01:03:05 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack: table full, dropping packet.
[rv120w]Sat Jan 1 01:03:05 2000(CET) [rv120w][System][PLATFORM] pptpdMgmtDBUpdateHandler:DBUpdate event: Table: networkInterface opCode:23 rowId:3
[rv120w]Sat Jan 1 01:03:06 2000(CET) [rv120w][System][PLATFORM] options.pptpd file found
[rv120w]Sat Jan 1 01:03:06 2000(CET) [rv120w][System][PLATFORM] upnpMgmtDBUpdateHandler:DBUpdate event: Table: networkInterface opCode:23 rowId:3
[rv120w]Sat Jan 1 01:03:07 2000(CET) [rv120w][System][PLATFORM] igmpMgmtDBUpdateHandler: update received: Table: networkInterface opCode: 23 rowId: 3
[rv120w]Sat Jan 1 01:03:07 2000(CET) [rv120w][System][PLATFORM] igmpDisable: failed to disable IGMP proxy. IGMP proxy may not be running at all!
[rv120w]Sat Jan 1 01:03:07 2000(CET) [rv120w][System][PLATFORM] Disabling Firewall Rule for DHCP Relay Protocol
[rv120w]Sat Jan 1 01:03:07 2000(CET) [rv120w][System][PLATFORM] ddnsMgmtDBUpdateHandler:DBUpdate event: Table: networkInterface opCode:23 rowId:3
[rv120w]Sat Jan 1 01:03:08 2000(CET) [rv120w][System][FIREWALL] Restarting Firewall [0]:[1] For WAN1
[rv120w]Sat Jan 1 01:03:08 2000(CET) [rv120w][System][PLATFORM] platformHandleDBUpdate:NimfAFStatus op=23 row=1
[rv120w]Sat Jan 1 01:03:08 2000(CET) [rv120w][System][PLATFORM] ddnsMgmtDBUpdateHandler:DBUpdate event: Table: NimfAFStatus opCode:23 rowId:1
[rv120w]Sat Jan 1 01:03:08 2000(CET) [rv120w][System][PLATFORM] platformHandleDBUpdate:resolverConfig op=23 row=2
[rv120w]Sat Jan 1 01:03:10 2000(CET) [rv120w][Kernel][KERNEL] printk: 129 messages suppressed.
[rv120w]Sat Jan 1 01:03:10 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack: table full, dropping packet.
[rv120w]Sat Jan 1 01:03:12 2000(CET) [rv120w][System][PLATFORM] platformHandleDBUpdate:resolverConfig op=23 row=2
[rv120w]Sat Jan 1 01:03:15 2000(CET) [rv120w][Kernel][KERNEL] printk: 99 messages suppressed.
[rv120w]Sat Jan 1 01:03:15 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack: table full, dropping packet.
[rv120w]Sat Jan 1 01:03:15 2000(CET) [rv120w][System][FIREWALL] restartStatus = 1 for LogicalIfName = WAN1
[rv120w]Sat Jan 1 01:03:15 2000(CET) [rv120w][System][FIREWALL] Restarting Firewall For WAN1 Address Update from 0.0.0.0:193.158.228.75
[rv120w]Sat Jan 1 01:03:15 2000(CET) [rv120w][System][PLATFORM] platformHandleDBUpdate:ipAddressTable op=23 row=2
[rv120w]Sat Jan 1 01:03:15 2000(CET) [rv120w][System][PLATFORM] pptpdMgmtDBUpdateHandler:DBUpdate event: Table: ipAddressTable opCode:23 rowId:2
[rv120w]Sat Jan 1 01:03:16 2000(CET) [rv120w][System][PLATFORM] options.pptpd file found
[rv120w]Sat Jan 1 01:03:16 2000(CET) [rv120w][System][PLATFORM] upnpMgmtDBUpdateHandler:DBUpdate event: Table: ipAddressTable opCode:23 rowId:2
[rv120w]Sat Jan 1 01:03:17 2000(CET) [rv120w][System][NIMF] Setting LED [0]:[1] For WAN1
[rv120w]Sat Jan 1 01:03:17 2000(CET) [rv120w][System][NIMF] nimfNetIfaceTblHandler: unable to get LedPinId
[rv120w]Sat Jan 1 01:03:17 2000(CET) [rv120w][System][PLATFORM] platformHandleDBUpdate:networkInterface op=23 row=3
[rv120w]Sat Jan 1 01:03:19 2000(CET) [rv120w][System][PLATFORM] pptpdMgmtDBUpdateHandler:DBUpdate event: Table: networkInterface opCode:23 rowId:3
[rv120w]Sat Jan 1 01:03:19 2000(CET) [rv120w][System][PLATFORM] options.pptpd file found
[rv120w]Sat Jan 1 01:03:20 2000(CET) [rv120w][Kernel][KERNEL] printk: 132 messages suppressed.
[rv120w]Sat Jan 1 01:03:20 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack: table full, dropping packet.
[rv120w]Sat Jan 1 01:03:20 2000(CET) [rv120w][System][PLATFORM] upnpMgmtDBUpdateHandler:DBUpdate event: Table: networkInterface opCode:23 rowId:3
[rv120w]Sat Jan 1 01:03:20 2000(CET) [rv120w][System][PLATFORM] igmpMgmtDBUpdateHandler: update received: Table: networkInterface opCode: 23 rowId: 3
[rv120w]Sat Jan 1 01:03:21 2000(CET) [rv120w][System][PLATFORM] igmpDisable: failed to disable IGMP proxy. IGMP proxy may not be running at all!
[rv120w]Sat Jan 1 01:03:21 2000(CET) [rv120w][System][PLATFORM] Disabling Firewall Rule for DHCP Relay Protocol
[rv120w]Sat Jan 1 01:03:21 2000(CET) [rv120w][System][PLATFORM] ddnsMgmtDBUpdateHandler:DBUpdate event: Table: networkInterface opCode:23 rowId:3
[rv120w]Sat Jan 1 01:03:22 2000(CET) [rv120w][System][FIREWALL] Restarting Firewall [0]:[1] For WAN1
[rv120w]Sat Jan 1 01:03:22 2000(CET) [rv120w][System][NIMF] Setting LED [0]:[1] For WAN1
[rv120w]Sat Jan 1 01:03:22 2000(CET) [rv120w][System][NIMF] nimfNetIfaceTblHandler: unable to get LedPinId
[rv120w]Sat Jan 1 01:03:22 2000(CET) [rv120w][System][PLATFORM] platformHandleDBUpdate:networkInterface op=23 row=3
[rv120w]Sat Jan 1 01:03:24 2000(CET) [rv120w][System][PLATFORM] pptpdMgmtDBUpdateHandler:DBUpdate event: Table: networkInterface opCode:23 rowId:3
[rv120w]Sat Jan 1 01:03:24 2000(CET) [rv120w][System][PLATFORM] options.pptpd file found
[rv120w]Sat Jan 1 01:03:25 2000(CET) [rv120w][System][PLATFORM] upnpMgmtDBUpdateHandler:DBUpdate event: Table: networkInterface opCode:23 rowId:3
[rv120w]Sat Jan 1 01:03:25 2000(CET) [rv120w][Kernel][KERNEL] printk: 186 messages suppressed.
[rv120w]Sat Jan 1 01:03:25 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack: table full, dropping packet.
[rv120w]Sat Jan 1 01:03:25 2000(CET) [rv120w][System][PLATFORM] igmpMgmtDBUpdateHandler: update received: Table: networkInterface opCode: 23 rowId: 3
[rv120w]Sat Jan 1 01:03:25 2000(CET) [rv120w][System][PLATFORM] igmpDisable: failed to disable IGMP proxy. IGMP proxy may not be running at all!
[rv120w]Sat Jan 1 01:03:26 2000(CET) [rv120w][System][PLATFORM] Disabling Firewall Rule for DHCP Relay Protocol
[rv120w]Sat Jan 1 01:03:26 2000(CET) [rv120w][System][PLATFORM] ddnsMgmtDBUpdateHandler:DBUpdate event: Table: networkInterface opCode:23 rowId:3
[rv120w]Sat Jan 1 01:03:27 2000(CET) [rv120w][System][FIREWALL] RestartThis sounds like you may have a faulty unit. I'd recommend opening a case with STAC to troubleshoot or RMA the device. Let me know if you have any questions. Have a wonderful day!
-Trent Good
** Please rate useful posts! ** -
My iMac does an automatic restart several times a day. It gives me a option to send in a "panic" report. This happens randomly during the day and night. Any idea of anything new that might be causing this? I am up to date on all applications.
Mac users often ask whether they should install "anti-virus" (AV) software. The usual answer is "no." That answer is right, but it may give the wrong impression that there is no threat from what are loosely called "viruses." There is a threat, and you need to educate yourself about it.
1. This is a comment on what you should—and should not—do to protect yourself from malicious software ("malware") that circulates on the Internet and gets onto a computer as an unintended consequence of the user's actions.
It does not apply to software, such as keystroke loggers, that may be installed deliberately by an intruder who has hands-on access to the computer, or who has been able to take control of it remotely. That threat is in a different category, and there's no easy way to defend against it. AV software is not intended to, and does not, defend against such attacks.
The comment is long because the issue is complex. The key points are in sections 5, 6, and 10.
OS X now implements three layers of built-in protection specifically against malware, not counting runtime protections such as execute disable, sandboxing, system library randomization, and address space layout randomization that may also guard against other kinds of exploits.
2. All versions of OS X since 10.6.7 have been able to detect known Mac malware in downloaded files, and to block insecure web plugins. This feature is transparent to the user. Internally Apple calls it "XProtect."
The malware recognition database used by XProtect is automatically updated; however, you shouldn't rely on it, because the attackers are always at least a day ahead of the defenders.
The following caveats apply to XProtect:
☞ It can be bypassed by some third-party networking software, such as BitTorrent clients and Java applets.
☞ It only applies to software downloaded from the network. Software installed from a CD or other media is not checked.
As new versions of OS X are released, it's not clear whether Apple will indefinitely continue to maintain the XProtect database of older versions such as 10.6. The security of obsolete system versions may eventually be degraded. Security updates to the code of obsolete systems will stop being released at some point, and that may leave them open to other kinds of attack besides malware.
3. Starting with OS X 10.7.5, there has been a second layer of built-in malware protection, designated "Gatekeeper" by Apple. By default, applications and Installer packages downloaded from the network will only run if they're digitally signed by a developer with a certificate issued by Apple. Software certified in this way hasn't been checked for security by Apple unless it comes from the App Store, but you can be reasonably sure that it hasn't been modified by anyone other than the developer. His identity is known to Apple, so he could be held legally responsible if he distributed malware. That may not mean much if the developer lives in a country with a weak legal system (see below.)
Gatekeeper doesn't depend on a database of known malware. It has, however, the same limitations as XProtect, and in addition the following:
☞ It can easily be disabled or overridden by the user.
☞ A malware attacker could get control of a code-signing certificate under false pretenses, or could simply ignore the consequences of distributing codesigned malware.
☞ An App Store developer could find a way to bypass Apple's oversight, or the oversight could fail due to human error.
Apple has taken far too long to revoke the codesigning certificates of some known abusers, thereby diluting the value of Gatekeeper and the Developer ID program. Those lapses don't involve App Store products, however.
For the reasons given, App Store products, and—to a lesser extent—other applications recognized by Gatekeeper as signed, are safer than others, but they can't be considered absolutely safe. "Sandboxed" applications may prompt for access to private data, such as your contacts, or for access to the network. Think before granting that access. Sandbox security is based on user input. Never click through any request for authorization without thinking.
4. Starting with OS X 10.8.3, a third layer of protection has been added: a "Malware Removal Tool" (MRT). MRT runs automatically in the background when you update the OS. It checks for, and removes, malware that may have evaded the other protections via a Java exploit (see below.) MRT also runs when you install or update the Apple-supplied Java runtime (but not the Oracle runtime.) Like XProtect, MRT is effective against known threats, but not against unknown ones. It notifies you if it finds malware, but otherwise there's no user interface to MRT.
5. The built-in security features of OS X reduce the risk of malware attack, but they are not, and never will be, complete protection. Malware is a problem of human behavior, not machine behavior, and no technological fix alone is going to solve it. Trusting software to protect you will only make you more vulnerable.
The best defense is always going to be your own intelligence. With the possible exception of Java exploits, all known malware circulating on the Internet that affects a fully-updated installation of OS X 10.6 or later takes the form of so-called "Trojan horses," which can only have an effect if the victim is duped into running them. The threat therefore amounts to a battle of wits between you and Internet criminals. If you're better informed than they think you are, you'll win. That means, in practice, that you always stay within a safe harbor of computing practices. How do you know when you're leaving the safe harbor? Below are some warning signs of danger.
Software from an untrustworthy source
☞ Software with a corporate brand, such as Adobe Flash Player, doesn't come directly from the developer’s website. Do not trust an alert from any website to update Flash, or your browser, or any other software. A genuine alert that Flash is outdated and blocked is shown on this support page. Follow the instructions on the support page in that case. Otherwise, assume that the alert is fake and someone is trying to scam you into installing malware. If you see such alerts on more than one website, ask for instructions.
☞ Software of any kind is distributed via BitTorrent, or Usenet, or on a website that also distributes pirated music or movies.
☞ Rogue websites such as Softonic, Soft32, and CNET Download distribute free applications that have been packaged in a superfluous "installer."
☞ The software is advertised by means of spam or intrusive web ads. Any ad, on any site, that includes a direct link to a download should be ignored.
Software that is plainly illegal or does something illegal
☞ High-priced commercial software such as Photoshop is "cracked" or "free."
☞ An application helps you to infringe copyright, for instance by circumventing the copy protection on commercial software, or saving streamed media for reuse without permission. All "YouTube downloaders" are in this category, though not all are necessarily malicious.
Conditional or unsolicited offers from strangers
☞ A telephone caller or a web page tells you that you have a “virus” and offers to help you remove it. (Some reputable websites did legitimately warn visitors who were infected with the "DNSChanger" malware. That exception to this rule no longer applies.)
☞ A web site offers free content such as video or music, but to use it you must install a “codec,” “plug-in,” "player," "downloader," "extractor," or “certificate” that comes from that same site, or an unknown one.
☞ You win a prize in a contest you never entered.
☞ Someone on a message board such as this one is eager to help you, but only if you download an application of his choosing.
☞ A "FREE WI-FI !!!" network advertises itself in a public place such as an airport, but is not provided by the management.
☞ Anything online that you would expect to pay for is "free."
Unexpected events
☞ A file is downloaded automatically when you visit a web page, with no other action on your part. Delete any such file without opening it.
☞ You open what you think is a document and get an alert that it's "an application downloaded from the Internet." Click Cancel and delete the file. Even if you don't get the alert, you should still delete any file that isn't what you expected it to be.
☞ An application does something you don't expect, such as asking for permission to access your contacts, your location, or the Internet for no obvious reason.
☞ Software is attached to email that you didn't request, even if it comes (or seems to come) from someone you trust.
I don't say that leaving the safe harbor just once will necessarily result in disaster, but making a habit of it will weaken your defenses against malware attack. Any of the above scenarios should, at the very least, make you uncomfortable.
6. Java on the Web (not to be confused with JavaScript, to which it's not related, despite the similarity of the names) is a weak point in the security of any system. Java is, among other things, a platform for running complex applications in a web page, on the client. That was always a bad idea, and Java's developers have proven themselves incapable of implementing it without also creating a portal for malware to enter. Past Java exploits are the closest thing there has ever been to a Windows-style virus affecting OS X. Merely loading a page with malicious Java content could be harmful.
Fortunately, client-side Java on the Web is obsolete and mostly extinct. Only a few outmoded sites still use it. Try to hasten the process of extinction by avoiding those sites, if you have a choice. Forget about playing games or other non-essential uses of Java.
Java is not included in OS X 10.7 and later. Discrete Java installers are distributed by Apple and by Oracle (the developer of Java.) Don't use either one unless you need it. Most people don't. If Java is installed, disable it—not JavaScript—in your browsers.
Regardless of version, experience has shown that Java on the Web can't be trusted. If you must use a Java applet for a task on a specific site, enable Java only for that site in Safari. Never enable Java for a public website that carries third-party advertising. Use it only on well-known, login-protected, secure websites without ads. In Safari 6 or later, you'll see a padlock icon in the address bar when visiting a secure site.
Stay within the safe harbor, and you’ll be as safe from malware as you can practically be. The rest of this comment concerns what you should not do to protect yourself.
7. Never install any commercial AV or "Internet security" products for the Mac, as they are all worse than useless. If you need to be able to detect Windows malware in your files, use one of the free security apps in the Mac App Store—nothing else.
Why shouldn't you use commercial AV products?
☞ To recognize malware, the software depends on a database of known threats, which is always at least a day out of date. This technique is a proven failure, as a major AV software vendor has admitted. Most attacks are "zero-day"—that is, previously unknown. Recognition-based AV does not defend against such attacks, and the enterprise IT industry is coming to the realization that traditional AV software is worthless.
☞ Its design is predicated on the nonexistent threat that malware may be injected at any time, anywhere in the file system. Malware is downloaded from the network; it doesn't materialize from nowhere. In order to meet that nonexistent threat, commercial AV software modifies or duplicates low-level functions of the operating system, which is a waste of resources and a common cause of instability, bugs, and poor performance.
☞ By modifying the operating system, the software may also create weaknesses that could be exploited by malware attackers.
☞ Most importantly, a false sense of security is dangerous.
8. An AV product from the App Store, such as "ClamXav," has the same drawback as the commercial suites of being always out of date, but it does not inject low-level code into the operating system. That doesn't mean it's entirely harmless. It may report email messages that have "phishing" links in the body, or Windows malware in attachments, as infected files, and offer to delete or move them. Doing so will corrupt the Mail database. The messages should be deleted from within the Mail application.
An AV app is not needed, and cannot be relied upon, for protection against OS X malware. It's useful, if at all, only for detecting Windows malware, and even for that use it's not really effective, because new Windows malware is emerging much faster than OS X malware.
Windows malware can't harm you directly (unless, of course, you use Windows.) Just don't pass it on to anyone else. A malicious attachment in email is usually easy to recognize by the name alone. An actual example:
London Terror Moovie.avi [124 spaces] Checked By Norton Antivirus.exe
You don't need software to tell you that's a Windows trojan. Software may be able to tell you which trojan it is, but who cares? In practice, there's no reason to use recognition software unless an organizational policy requires it. Windows malware is so widespread that you should assume it's in every email attachment until proven otherwise. Nevertheless, ClamXav or a similar product from the App Store may serve a purpose if it satisfies an ill-informed network administrator who says you must run some kind of AV application. It's free and it won't handicap the system.
The ClamXav developer won't try to "upsell" you to a paid version of the product. Other developers may do that. Don't be upsold. For one thing, you should not pay to protect Windows users from the consequences of their choice of computing platform. For another, a paid upgrade from a free app will probably have all the disadvantages mentioned in section 7.
9. It seems to be a common belief that the built-in Application Firewall acts as a barrier to infection, or prevents malware from functioning. It does neither. It blocks inbound connections to certain network services you're running, such as file sharing. It's disabled by default and you should leave it that way if you're behind a router on a private home or office network. Activate it only when you're on an untrusted network, for instance a public Wi-Fi hotspot, where you don't want to provide services. Disable any services you don't use in the Sharing preference pane. All are disabled by default.
10. As a Mac user, you don't have to live in fear that your computer may be infected every time you install software, read email, or visit a web page. But neither can you assume that you will always be safe from exploitation, no matter what you do. Navigating the Internet is like walking the streets of a big city. It can be as safe or as dangerous as you choose to make it. The greatest harm done by security software is precisely its selling point: it makes people feel safe. They may then feel safe enough to take risks from which the software doesn't protect them. Nothing can lessen the need for safe computing practices. -
Execution time of Business Rule
Hi,
My rule is taking more than a day to run. How can i watch its exact execution time. I can't see it in job console as it shows that the business rule is still in processing. And i have also checked in HSP_JOB_STATUS table. It also shows that it is in processing.
Is there an other way to see the exact execution time of business rule.
Thanks and Regards.To see the exact execution time, you can check in HBRlaunch.log file in planning.
If you want to track the execution time of different parts of your calculation script/business rule then see the essbase application log in detail in EAS.
To see log specific to your business rule, use maxl and spool log to text file, this will give you the logs related to your business rule only and the execution time.
Thanks
YSP -
Hey guys,
Hope you are having a good day!
My IMac 3.1Ghz Intel Core I5, 16GB 1333MHz DDR3 memory running OSX 10.9.2 is having serious issues.
About 3 times per day sporadically it loses connectivity to the bluetooth keyboard and mouse, and is irrecoverable (I have tried everything, and it is not trying to connect to another device - e.g. IPAD).
When this happens, I am usually using an audio program (e.g. Logic Pro X, or Ableton Live), and when sound is playing, the event stops the sound altogether as well.
If I then hold the power button, the message asking if I want to shutdown or restart comes up, and the system appears responsive. However, there is no way for me to select anything because of the keyboard and mouse being down.
However, I jumped the gun and got a free IPAD app. that gives me limited control with a keyboard and mouse on there, enough that I am able to select to shut the computer down.
When this happens, the computer takes 5-10 minutes to force quit all active applications (e.g. logic pro, active audio interface program RME totalmix, etc.). When it finally, finally quits everything, and attempts to shutdown, it takes a very long time and gets stuck on a white screen. When it gets there the computer stops making noise altogether but has not properly shutdown yet, so it appears some sort of system failure is taking place.
It is really frustrating that this is happening, and I really hope my computer isn't broken. I would really appreciate any help or advice provided.
Thanks so much!!!!!!!!!!When you have the problem, note the exact time: hour, minute, second.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above. Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first. Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. In most cases, a few dozen lines are more than enough. It is never necessary or helpful to post more than about 100 lines. "The more, the better" is not the rule here.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting. -
Time Management _selection Rules
Hi all,
What is the use of selection rule concept in Time management Module....
How we will use this in real time...can any one of u explain me in detail with good examples...
is there any relation between these two table T553A and T553S?
Thanks & Regards,
Avanthika.kHi,
Please go through the attached thread which is giving the information with examples...
Time management-day type selection rule
Best Regards,
enkat.
Edited by: Venkateswara Sarma Bhamidipati on Feb 11, 2011 3:43 AM -
Lumia 520 rebooting several times a day
I have a Lumia 520 that asks for the SIM PIN several times a day. I noticed in app System Information by Eyjo that when that happens, the operating time is very low. I never witnessed it but I assume it rebooted.
What can I do? Thanks.
Phone
Model: NOKIA RM-914_eu_euro2_367
Time: Friday, June 27, 2014 ● 10:28:22 AM
Time zone: UTC
Turned on since: Friday, June 27, 2014 ● 10:08:21 AM
Operating time: 20 minutes and 1 seconds
Screen resolution: 480 × 800
Display language: English (United States)
Region format: English (United States)
OS version: 8.0.10517.0
.NET CLR version: 4.0.50829.0
Firmware version: 3056.40000.1349.2005
Hardware version: 1.5.0.1Confirm that the Battery contacts are not loose .. Put a paper packing along with the Battery to rule out this possibility.
Other major reason for this to happen is a faulty SIM. If your SIM is old or cut from a regular SIM, get one which is a ready Micro SIM. -
How many mails i can send at a time per day using APEX mail system?
HI,
I am working on application, when i have written a process to send mail, i have a project where i have to send mail at a time for all the email id's
given list there are upto 5000 email id's where text body also include certain set of data from a report. thinking at a time 3000 its difficult i divided
it region wise, but still each region have 2000 odd email id's. during testing when i run the process just 950 mails i could send then i got a error
saying "ORA-20001: You have exceeded the maximum number of email messages per workspace. Please contact your administrator." so please
can any one help me to know How many mails i can send at a time per day using APEX mail system?
Thanks in advance
GowthamiHi jfosteroracle,
You are getting the error may be the following reason,
Check the following,
Login as ADMIN and Goto -->Manage Instance-->Instance Settings--> Mail-->Maximum Emails per workspace
Actually this number denotes the Number of mails can be sent per 24 hour for the workspace,It may exceeded.
It may be the reason.
Thank you.
Regards,
Gurujothi
Edited by: Gurujothi on Jun 27, 2012 5:54 AM -
Doing something at a specific time of day
Hi all,
Basically what I am doing is an alarm clock, to wake me up to some MP3s. It all works fine.
My only concern is the following:
private Thread tTimeCheck = new Thread() {
public void run () {
while (true) {
cal = new GregorianCalendar();
int hour24 = cal.get(Calendar.HOUR_OF_DAY);
int min = cal.get(Calendar.MINUTE);
if (hour24 == JSelectHour.getValeur() && min == JSelectMinute.getValeur()) {
playMusic = true;
} else {
playMusic = false;
try {
t.sleep(1000);
} catch (InterruptedException e) {
};Is it unefficient to check every second, to see if the time of day is equal to the set time on the alarm clock? It seems to me that there has to be a better way to do this.Thank you for your reply.
This is my thread that plays the music.
while (true) {
if (playMusic && jpnl.getAlarmStatus() == 1) {
testPlay("C:/Documents and Settings/Seb/Desktop/Music/01-nirvana-smells.like.teen.spirit.mp3"); //hardcoded for now
}testPlay is executed the the entire song plays before the next iteration.
Next step: I'll look to put this in the taskbar (windows tray / whatever it's called), never done that before =)
Thanks,
Message was edited by:
Robocrotch -
Hard lock ups multiple times a day - How can I troubleshoot?
My machine locks up hard multiple times a day. If I happen to be sitting in front of it, I observe that the image on the monitors stops changing. Mouse and keyboard will not work at all (including Magic key SysRq sequences). I cannot ping the box from another machine. The system has not made it to 24 hours of uptime for some weeks.
I am beginning to suspect that this may be an issue with the NVIDIA driver, but that's only a guess since it's the only thing I've seen before that can lock up a machine hard like this. I have checked journalctl and the Xorg logs, but don't see anything telling.
What should be my next steps toward solving this issue?When it locks up, do any indicators on the keyboard blink? That would be an indication of a kernel panic.
If there are no blinking lights, does it unlock eventually?
Has the machine ever been stable?
Have you tried installing a RAM test in your boot loader and running it?
Next, I would start blacklisting any kernel module you don't absolutely need to see if you can isolate it that way.
Also, this looks ominous:
Apr 29 07:49:48 lore kernel: This system BIOS has enabled interrupt remapping
on a chipset that contains an erratum making that
feature unstable. To maintain system stability
interrupt remapping is being disabled. Please
contact your BIOS vendor for an update
I redouble my suggestion you pare down loaded modules to try and isolate this.
Also, I see that it looks at the microcode
Apr 29 07:49:48 lore kernel: microcode: CPU0 sig=0x106a5, pf=0x1, revision=0x11
Apr 29 07:49:48 lore kernel: microcode: CPU1 sig=0x106a5, pf=0x1, revision=0x11
Apr 29 07:49:48 lore kernel: microcode: CPU2 sig=0x106a5, pf=0x1, revision=0x11
Apr 29 07:49:48 lore kernel: microcode: CPU3 sig=0x106a5, pf=0x1, revision=0x11
Apr 29 07:49:48 lore kernel: microcode: CPU4 sig=0x106a5, pf=0x1, revision=0x11
Apr 29 07:49:48 lore kernel: microcode: CPU5 sig=0x106a5, pf=0x1, revision=0x11
Apr 29 07:49:48 lore kernel: microcode: CPU6 sig=0x106a5, pf=0x1, revision=0x11
Apr 29 07:49:48 lore kernel: microcode: CPU7 sig=0x106a5, pf=0x1, revision=0x11
But I don't see it being updated. That might be normal for your processor, but double check that and ensure you have the microcode update stuff installed in the boot loader correctly. -
IPhone 4S battery draining too fast...Need to charge 3 times a day
Finally after 4 years I was very excited to get an iPhone that has all the features I wanted…but I am disappointed so far.
I purchased an iPhone 4S 32GB on 10/7 and has not been impressed with the battery life. I have to charge my iPhone at least 3 times a day. I go to work at 8 AM and by 11:30 AM the battery is at 20 %, so I charge it again which takes only about 60 to 120 minutes to charge, and by 5:30 PM I have to start charging again…the third charge has start around 11:30 PM and I have to keep the phone plugged overnight otherwise it will be dead by 6 AM.
I have read other posts on the web and people have suggested turning notifications, location services…etc which I went ahead and did but that did not change the battery issue. What is the purpose of having the iPhone 4S if all the features have to be turned off.
I always try to kill apps that running in background but still no fix to battery issue.
on 10/19/11 I went to Apple store and exchanged the phone with new one. The apple rep activated the phone for me and the charge was at 78 %. I left the store and 10 minutes later I was at my house, but again I was surprised to see the battery has drooped to 65 % within 10 minutes. While I was driving home I did not touch the phone or make/receive calls.
When I got home I plugged the phone and when it was charge at 100 % I unplugged it and 40 minutes later the battery dropped to 70 %.
Today I unplugged my iPhone 4s at 8:20 this morning with 100% and by 10:43 AM I am down to 63%. By 11:13 AM the battery was at 54% and by 11:46 AM the battery was down to 44% with me not touching it. I have turned everything off such notifications, locations services...etc and nothing in the background is working and I only used it for a 10 minute conversation.
It seemed that a lot of users are have similar issue. Not sure if the issue related to iOS 5, iPhone or bad batch of iPhone or iPhone batteries.
Before getting the iPhone 4S i had a 3GS from a family member that i had to charge at least 3 times a day. The only reason I got the new 4S is to not have to deal with frequent charge. I think I am 90 % close to returning the phone back to Apple and wait few months before attempting to purchase another phone.
Thanks.....BWhat made the trick for me was to drain the phone completely - until it dies. (It took quite a while to go from 3% to 0...). Then, charge it overnight.
Previous days I would start charging it with the battery at 10-15%, on red. Also for the last week I've been trying disabling functions, with the hope of finding what was the "offending" piece but without much success. Still was loosing about 10% per hour, just by using it to check emails, maps, and sometimes a call.
Today is almost two hours since I left home, with everything turned on again, used mail, maps with traffic during the ride to work, some browsing - using it "normally" - and the battery is still at 95%.
That looks more like normal to me.!!
Might try to drain it to 0% again as many other suggested, but if it is a battery charger "calibration", it shouldn't be necesary to do it more than once. -
Just installed Mavericks and my computer crashes 4-5 times a day now.
Hi. Just a few days ago I finally gave in and upgraded to Mavericks (10.9.5) from 10.6.8 as there was some software that I needed to use that necessitated the upgrade. Since I've upgraded, my MacBook Pro crashes at least 4-5 times daily. I am not doing anything unusual when it occurs. Usually typing an email, or switching between tabs in Safari or clicking save on a word file. In another post I was introduced to an app called Etrecheck which seemed to me to be a fine way to show all the Mac geniuses on this forum whats going with my computer (unfortunately I am not savvy enough to look through it and understand what's going on). I've posted the report below. Maybe someone can help me figure out what's causing my computer to crash?
The next time it happens I can also copy the report that shows up after the crash and post it as well. Many thanks in advance.
Problem description:
Since I downloaded Mavericks (10.9.5) my computer crashes randomly 4-5 times per day.
EtreCheck version: 2.0.4 (89)
Report generated October 15, 2014 at 8:07:20 AM EDT
Hardware Information: ℹ️
MacBook Pro (15-inch, Mid 2010) (Verified)
MacBook Pro - model: MacBookPro6,2
1 2.66 GHz Intel Core i7 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1067 MHz ok
BANK 1/DIMM0
2 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics - VRAM: 288 MB
Color LCD 1680 x 1050
NVIDIA GeForce GT 330M - VRAM: 512 MB
System Software: ℹ️
OS X 10.9.5 (13F34) - Uptime: 9:9:52
Disk Information: ℹ️
ST9500420ASG disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (75.82 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
MATSHITADVD-R UJ-898
USB Information: ℹ️
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Internal Memory Card Reader
Apple Inc. Built-in iSight
Apple Computer, Inc. IR Receiver
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Toast 6 Titanium.app
[not loaded] com.roxio.TDIXController (1.2) Support
/System/Library/Extensions
[loaded] com.Cycling74.driver.Soundflower (1.5.1) Support
[not loaded] com.IKMultimedia.driver.StompIO1 (1.0.0) Support
[not loaded] com.digidesign.fwfamily.driver (8.0.5f2) Support
[loaded] com.digidesign.iokit.DigiDal (8.0.5f2) Support
[not loaded] com.digidesign.mbox2.boot.driver (8.0.5f2) Support
[not loaded] com.digidesign.mbox2.driver (8.0.5f2) Support
[not loaded] com.digidesign.usb.elevenrack.driver (1.0.1) Support
[not loaded] com.frontierdesign.iokit.alphatrack (1.4.1f1) Support
[not loaded] com.ikmultimedia.driver.StealthPedal (1.0.0) Support
[not loaded] com.paceap.kext.pacesupport.master (5.9 - SDK 10.6) Support
/System/Library/Extensions/PACESupportFamily.kext/Contents/PlugIns
[not loaded] com.paceap.kext.pacesupport.leopard (5.9 - SDK 10.4) Support
[not loaded] com.paceap.kext.pacesupport.panther (5.9 - SDK 10.-1) Support
[loaded] com.paceap.kext.pacesupport.snowleopard (5.9 - SDK 10.6) Support
[not loaded] com.paceap.kext.pacesupport.tiger (5.9 - SDK 10.4) Support
Startup Items: ℹ️
Digidesign Mbox 2: Path: /Library/StartupItems/Digidesign Mbox 2
DigidesignLoader: Path: /Library/StartupItems/DigidesignLoader
Qmaster: Path: /Library/StartupItems/Qmaster
Startup items are obsolete and will not work in future versions of OS X
Launch Agents: ℹ️
[running] com.amazon.sendtokindle.launcher.plist Support
[running] com.eastwest.server.plist Support
[running] com.frontierdesign.alphatrack.daemon.plist Support
[running] com.sony.PMBPortable.AutoRun.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[running] com.digidesign.elevenrack.helper.plist Support
[running] com.digidesign.fwfamily.helper.plist Support
[running] com.paceap.eden.licensed.plist Support
[loaded] PACESupport.plist Support
User Launch Agents: ℹ️
[invalid?] com.amazon.cloud-player.plist Support
[loaded] com.google.keystone.agent.plist Support
User Login Items: ℹ️
iTunesHelper UNKNOWN (missing value)
Dropbox Application (/Applications/Dropbox.app)
TomTomHOMERunner ApplicationHidden (/Users/[redacted]/Library/Application Support/TomTom HOME/TomTomHOMERunner.app)
Android File Transfer Agent Application (/Users/[redacted]/Library/Application Support/Google/Android File Transfer/Android File Transfer Agent.app)
Internet Plug-ins: ℹ️
WidevineMediaOptimizer: Version: 6.0.0.12757 - SDK 10.7 Support
FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
Default Browser: Version: 537 - SDK 10.9
Flash Player: Version: 15.0.0.152 - SDK 10.6 Mismatch! Adobe recommends 15.0.0.189
QuickTime Plugin: Version: 7.7.3
CitrixICAClientPlugIn: Version: 11.2.0 Support
OfficeLiveBrowserPlugin: Version: 12.3.6 Support
iLokClientHelper: Version: 3.4 Support
iPhotoPhotocast: Version: 7.0
User Internet Plug-ins: ℹ️
WebEx64: Version: 1.0 - SDK 10.6 Support
Audio Plug-ins: ℹ️
DVCPROHDAudio: Version: 1.3
JackRouter: Version: JackRouter Support
Digidesign CoreAudio: Version: 8.0.5 Support
3rd Party Preference Panes: ℹ️
Citrix Online Plug-in Support
Digidesign Eleven Rack Support
DigidesignMbox2 Support
Digidesign Mbox 2 Pro Support
Flash Player Support
Perian Support
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
10% com.apple.WebKit.Networking
7% fontd
2% com.apple.WebKit.Plugin.64
1% WindowServer
0% configd
Top Processes by Memory: ℹ️
172 MB com.apple.WebKit.WebContent
125 MB WindowServer
112 MB softwareupdated
86 MB Safari
82 MB Mail
Virtual Memory Information: ℹ️
25 MB Free RAM
1.46 GB Active RAM
1.45 GB Inactive RAM
856 MB Wired RAM
2.11 GB Page-ins
414 MB Page-outsSure enough the computer just crashed a few minutes after posting. Here's the report after the computer rebooted:
Anonymous UUID: 40656744-595E-FDB7-F6E9-0497F4D35619
Wed Oct 15 08:27:05 2014
panic(cpu 0 caller 0xffffff7f9fa95f7c): "GPU Panic: [<None>] 5 3 7f 0 0 0 0 3 : NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xc0000000 0xffffff80c5ad5000 0x0a5480a2, D0, P3/4\n"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.6.22/src/Apple MuxControl/kext/GPUPanic.cpp:127
Backtrace (CPU 0), Frame : Return Address
0xffffff80b3abaf80 : 0xffffff801d622f79
0xffffff80b3abb000 : 0xffffff7f9fa95f7c
0xffffff80b3abb0d0 : 0xffffff7f9e11bf1b
0xffffff80b3abb190 : 0xffffff7f9e1e550a
0xffffff80b3abb1d0 : 0xffffff7f9e1e557a
0xffffff80b3abb240 : 0xffffff7f9e464056
0xffffff80b3abb370 : 0xffffff7f9e208ba9
0xffffff80b3abb390 : 0xffffff7f9e12296d
0xffffff80b3abb440 : 0xffffff7f9e120478
0xffffff80b3abb640 : 0xffffff7f9e121dc7
0xffffff80b3abb710 : 0xffffff7f9f086e1d
0xffffff80b3abb890 : 0xffffff7f9f086823
0xffffff80b3abb8a0 : 0xffffff7f9f04baf0
0xffffff80b3abb8b0 : 0xffffff7f9f04bb65
0xffffff80b3abb8c0 : 0xffffff7f9f037c51
0xffffff80b3abb8e0 : 0xffffff7f9f036fd9
0xffffff80b3abba60 : 0xffffff7f9f066940
0xffffff80b3abbb20 : 0xffffff7f9f035ad9
0xffffff80b3abbb70 : 0xffffff801dacf146
0xffffff80b3abbb90 : 0xffffff801dad0741
0xffffff80b3abbbf0 : 0xffffff801dace1af
0xffffff80b3abbd40 : 0xffffff801d6b6998
0xffffff80b3abbe50 : 0xffffff801d626bc1
0xffffff80b3abbe80 : 0xffffff801d6139c5
0xffffff80b3abbef0 : 0xffffff801d61e013
0xffffff80b3abbf70 : 0xffffff801d6c9b9d
0xffffff80b3abbfb0 : 0xffffff801d6f4196
Kernel Extensions in backtrace:
com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[D61B2BB9-4289-318D-9197-5E1E13B 1FF32]@0xffffff7f9e0cc000->0xffffff7f9e334fff
dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f9dcbf000
dependency: com.apple.iokit.IONDRVSupport(2.4.1)[D41125CE-69BD-32E7-9B1D-4E83431662DD]@0xff ffff7f9e0bc000
dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[75D81741-64C1-3941-ADFA-9D6B6C434EE4]@0 xffffff7f9e079000
com.apple.nvidia.classic.NVDANV50HalTesla(8.2.4)[B0E6AAA7-E970-3D81-8B43-145D56 A3A4AC]@0xffffff7f9e33f000->0xffffff7f9e5e8fff
dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[D61B2BB9-4289-318D-9197-5E1E13B 1FF32]@0xffffff7f9e0cc000
dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f9dcbf000
com.apple.GeForceTesla(8.2.4)[B0074750-2FC6-3E26-BEA0-5AD5469686CF]@0xffffff7f9 f024000->0xffffff7f9f0eefff
dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f9dcbf000
dependency: com.apple.iokit.IONDRVSupport(2.4.1)[D41125CE-69BD-32E7-9B1D-4E83431662DD]@0xff ffff7f9e0bc000
dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[75D81741-64C1-3941-ADFA-9D6B6C434EE4]@0 xffffff7f9e079000
dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[D61B2BB9-4289-318D-9197-5E1E13B 1FF32]@0xffffff7f9e0cc000
com.apple.driver.AppleMuxControl(3.6.22)[32862231-50BC-3AF6-87A2-703321AE4F90]@ 0xffffff7f9fa87000->0xffffff7f9fa9afff
dependency: com.apple.driver.AppleGraphicsControl(3.6.22)[AA46D551-BE0F-33DA-93A3-8F46197BB 36F]@0xffffff7f9fa7f000
dependency: com.apple.iokit.IOACPIFamily(1.4)[045D5D6F-AD1E-36DB-A249-A346E2B48E54]@0xfffff f7f9df7f000
dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f9dcbf000
dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[75D81741-64C1-3941-ADFA-9D6B6C434EE4]@0 xffffff7f9e079000
dependency: com.apple.driver.AppleBacklightExpert(1.0.4)[80899285-3952-30DA-A0F9-357C51E104 CF]@0xffffff7f9fa82000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
13F34
Kernel version:
Darwin Kernel Version 13.4.0: Sun Aug 17 19:50:11 PDT 2014; root:xnu-2422.115.4~1/RELEASE_X86_64
Kernel UUID: 9477416E-7BCA-3679-AF97-E1EAAD3DD5A0
Kernel slide: 0x000000001d400000
Kernel text base: 0xffffff801d600000
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 8076473822747
last loaded kext at 654256352755: com.apple.filesystems.smbfs 2.0.3 (addr 0xffffff7f9fb9f000, size 335872)
last unloaded kext at 334416608476: com.apple.driver.AppleUSBUHCI 656.4.1 (addr 0xffffff7f9e8bd000, size 65536)
loaded kexts:
com.paceap.kext.pacesupport.snowleopard 5.9
com.Cycling74.driver.Soundflower 1.5.1
com.digidesign.iokit.DigiDal 8.0.5f2
com.apple.filesystems.smbfs 2.0.3
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.iokit.IOBluetoothSerialManager 4.2.7f3
com.apple.driver.AGPM 100.14.34
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleMikeyDriver 2.6.3f4
com.apple.driver.AppleHDA 2.6.3f4
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleMuxControl 3.6.22
com.apple.driver.AppleIntelHDGraphics 8.2.4
com.apple.driver.AppleIntelHDGraphicsFB 8.2.4
com.apple.GeForceTesla 8.2.4
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.driver.AppleMCCSControl 1.2.5
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.7f3
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleUSBCardReader 3.4.1
com.apple.driver.AppleIRController 325.7
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.iokit.SCSITaskUserClient 3.6.7
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.6.0
com.apple.driver.AppleUSBHub 683.4.0
com.apple.driver.AppleFWOHCI 5.0.2
com.apple.iokit.AppleBCM5701Ethernet 3.8.1b2
com.apple.driver.AirPort.Brcm4331 700.20.22
com.apple.driver.AppleUSBEHCI 660.4.0
com.apple.driver.AppleAHCIPort 3.0.5
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 217.92.1
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 217.92.1
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.AppleGraphicsDeviceControl 3.6.22
com.apple.driver.DspFuncLib 2.6.3f4
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.iokit.IOAudioFamily 1.9.7fc2
com.apple.kext.OSvKernDSPLib 1.14
com.apple.iokit.IOSurface 91.1
com.apple.iokit.IOBluetoothFamily 4.2.7f3
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.AppleGraphicsControl 3.6.22
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.nvidia.classic.NVDANV50HalTesla 8.2.4
com.apple.driver.AppleSMBusController 1.0.12d1
com.apple.nvidia.classic.NVDAResmanTesla 8.2.4
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.7f3
com.apple.driver.AppleHDAController 2.6.3f4
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.iokit.IOHDAFamily 2.6.3f4
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.7.1d6
com.apple.driver.AppleSMC 3.1.8
com.apple.driver.AppleUSBMultitouch 240.10
com.apple.iokit.IOSCSIBlockCommandsDevice 3.6.7
com.apple.iokit.IOUSBMassStorageClass 3.6.0
com.apple.iokit.IOUSBHIDDriver 660.4.0
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 656.4.1
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.7
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.7
com.apple.iokit.IOUSBUserClient 660.4.2
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOEthernetAVBController 1.0.3b4
com.apple.driver.mDNSOffloadUserClient 1.0.1b5
com.apple.iokit.IO80211Family 640.36
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOAHCIFamily 2.6.5
com.apple.iokit.IOUSBFamily 686.4.1
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.11.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 23
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.pthread 1
com.apple.kec.corecrypto 1.0
Model: MacBookPro6,2, BootROM MBP61.0057.B0C, 2 processors, Intel Core i7, 2.66 GHz, 4 GB, SMC 1.58f17
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x802C, 0x31364A53463235363634485A2D3147314631
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x802C, 0x31364A53463235363634485A2D3147314631
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.7f3 14616, 3 services, 23 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST9500420ASG, 500.11 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: Hub
USB Device: BRCM2070 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Internal Memory Card Reader
USB Device: Apple Internal Keyboard / Trackpad
USB Device: Hub
USB Device: Built-in iSight
USB Device: IR Receiver
Thunderbolt Bus: -
New to FiOS - Set Top Box isn't showing time of day
I just had FiOS installed on multiple TV's HD and non-HD. All the set-top boxes don't show a time of day except the HD DVR. Is there a way to set the others up to show the time of day? If so, how?
The new HD STB's do no have a display at all. cannot get a clock on the QIP7100-2 STB's
====================================================================================
Error exists between keyboard and chair. -
DVR STB will not hold the display of the time of day.
I am new to FIOS. I have a DVR Set Top Box for my HD TV. I prefer to see the time of day displayed. I set this option in Menu/Settings/Set Top/Display and it works OK UNTIL you change the channel. Then it displays the new channel and DOES NOT revert back to the time of day as it is supposed to do.
Called Verizon. They reset the box. It worked OK for about 30 minutes then went back to the same problem. I don't want them to reset it again because when they did it wiped all of my favorites.
Any solutions will be greatly appreciated.
Solved!
Go to Solution.Try rebooting the STB and then change the clock setting and change it back. That worked for me when i had this issue. I have seen this reported a couple of times and most of the time if this fix didnt work, the issue resolved itself within a couple of days.
Also, it should be noted that with the 1.7IMG release they changed the way the front display functioned. It now changes to show the channel number at every program change and then reverts back to showing the clock after about 2 minutes.
"If your problem has been solved, please mark it as such. Don't forget to hand out your Kudos!"
Maybe you are looking for
-
'Message interface no longer exists in the Integration Repository ' Error
Hi , i am getting this message whenever i try to add Service in Receiver determination. what is the reason for this message as due to this i am not to select any message in XPATH.
-
Java OutOfMemoryError on File Upload in ADF
Hi All, I am using JDeveloper 11.1.1.5.0. I am uploading a file in ADF. i should be able to upload files upto 10MB. below is the method I am calling when user puts the filename. public void setUploadedFile(ValueChangeEvent valueChangeEvent) {
-
Lightroom encountered an error when reading it's preview cache and needs to quit
When I open the program, it shuts down with the above error. It says it will try to fix next time Lightroom opens. It does not. What can I do?
-
I clicked on my iphoto app, it wouldn't launch. Then I accidentally removed the app from my dock. How can I recover iphoto?
-
Neither my PowerBook nor my iMac will read video DVDs. When I insert the disc in either machine, I get the error message "Disc Insertion The disk you inserted was not readable by this computer.", along with the options of "Ignore" & "Eject". I don't