Cn=Users domain is not displaying after configuring new object class in OAM

We have configured a custom object class which inherits inetorgperson objectclass and reconfigured OAM. After the reconfiguration cn=Users is not available in OAM Attibute Access Control Management domain selection,Delegated Administration domain selection , Workflow Definition -workflow domain selection and searchbase domain.
If anyone has faced similar issue,please reply back.
Thanks inadvance.
Regards,
Srikanth

> I cannot RDP using the user
Any error message?
Greetings/Grüße,
Martin
Mal ein
gutes Buch über GPOs lesen?
Good or bad GPOs? - my blog…
And if IT bothers me -
coke bottle design refreshment (-:

Similar Messages

Forms not displaying after ATG 7 patch

Forms not displaying after ATG 7 patch., 11i Linux OS.
6241631

Hi;
AFAIK no, i also cant see this info at below doc
About Oracle Applications Technology 11i.ATG_PF.H.delta.7 (RUP 7) [ID 783600.1]
Please check upper note below part and be sure you have all those steps on your issue:
-Known Issues
-Instructions for Applying Oracle Applications Technology Update for 11i.ATG_PF.H.delta.7
-Implementation and User Documentation
Regard
Helios

Oem web page will not display after O/S dst patch

Hello,
The Grid web page will not display after we DST patch for the o/s.
All below start fine without any errors:
emctl start oms
emctl start iasconsole
opmnctl startall
emctl start agent
The Grid web page is not displaying. What might happened after the o/s dst patch that might cause this? Our GRID is 10204 with a 10104 repository. The 10104 has not yet been dst patch.
What logs should I be looking at to figure why the web page is not displaying? Thank you.

Provide the output of these comands:
$OMS_HOME/bin/emctl status oms
$OMS_HOME/opmn/bin/opmnctl status
$AGENT_HOME/bin/emctl status agent
$DATABASE_HOME/bin/sqlplus "/ as sysdba" << EOF
SELECT STATUS FROM V$INSTANCE;
EOF
$DATABASE_HOME/bin/lsnrctl status LISTENER_NAME
Regards

My iBook will not display after Power up Chime

Please I need Help.
My iBook (16VRAM) Does not display after the power up chime. so i have tried to reset the PRAM by holding down CMD, OPTION, P & R after the chime, But Nothing Happens, I dont hear a second chime (I dnt Knw how long am suppose to hold down the keys, But i held it for 2 mins and still nothing)
Please help.
Thanks.

Welcome to Apple Discussions Aaron
Force quit in the middle of an installation spells "trouble". Try starting the computer in Safe Mode. If successful, restart the computer and see if it fully boots. If not, you more than likely have directory damage that needs to be repaired. Disk Utility may be up to the task.
Post back

Mails are not displayed after migration to new iMac

Hello!
Today I migrated the contents of my old office iMac (G4, MacOS 10.4.11) to my new one (new 20'', MacOS 10.5) via FireWire.
Unfortunately my mails are not displayed on my new Mac:
I can see all my mailboxes on the left side, but the window, that should show the mails themselves is empty. I already took a look into the /library/mail folder and all my mails seem to be there.
They are just not displayed.
I use mail on that Mac with only one POP account.
What could cause this behaviour?
Thank you very much in advance!
Thomas

I figured out niw, how to solve the problem:
After the migration go to the Userdirectory-> Library -> Mail and delete the files:
MessageRules.plist
MessageRules.plist.backup
MessageSorting.plist
MessageSorting.plist.backup
Then Mail works properly.
(The only thing ist, that all filer rules are gone.)

Thumbnails do not display after using rebuild tool

I am using OSX 10.7.5, and iPhoto 8.1.2.
recently I made a back up copy of my files.
I then reinstalled my operating system.
I then copied my iphoto library back onto my computer.
imported my iPhoto library into iPhoto
Pictures are in iPhoto.
Thumbnails do not display.
I have used the rebuild tools provided by iPhoto.
Still no thumbnails displaying.
any other ideas?

It relates to your suggestion in that, the reason I posted was to solve a thumbnail issue.
"re: Thumbnails do not display after using rebuild tool"
Terence suggested reloading my back up library.
I asked Terence where I should import to.
I was thinking that my thumbnail issue was related to the way I imported my back up.
You clarified where to import the library...
I tried it and I still have no thumbnails
I have already tried repairing permissions and rebuilding thumbnails using the i photo repair tool.
can you help me?

Why Netflix does not open after the new 7.0 update?

WHY Netflix does not open after the new update 7.9?

Vincent149 wrote:
I went to At&t yesterday, they said you have to call Apple support! Which im gong to try today since no one on here has posted anything back! Im frustrated! Maybe its there way of selling new phone!!!!
These are user to user forums. You are not addressing Apple by posting here. If some other person has a solutoin for you, then they will post it.

HT4623 my phone main button not working after installed new version software 7.0.6

my phone main button not working after installed new version software 7.0.6

Arrange some liquid like petrol spirit and w 40
two drops in to home button.
30 times press slowly slowly and then restart your apply iphone.
You will get ready.
I am sure. Thanking you...

User Forms are not displaying in SAP B1 2005

Hi,
I have created an application using SAP B1 2004. All user forms are displaying properly in SAP B1 2004. But when I am trying to run the same application in SAP B1 2005, It is unable to display some of the User Forms.
Can any body help me for the same?
Thanks.
Archana.

Hi Archana,
Are you using some special items in your form?
You say the form is not displayed, do you have a return error or exception when trying to open it in debug mode?
In Debug mode please pay attention to the VS.NET configuration, you have in Debug Menu -> Exceptions to configure all types of exception to throw into the debugger. Sometimes the COM exception are not thrown and your code just jumps after the error to the end of your method...
Have you tried to open the xml of your form with the ScreenPainter to see if everything is correct in there?
Hope it helps
Trinidad.

Mac Mini login not displayed after screensaver

I have a Mac Mini that routinely (several times a week) will not display the login screen after the screensaver has kicked in. The screensaver is running find (e.g. changing which pictures are displayed) but when you move the mouse to stop the screensaver the photo being displayed freezes and the login (list of users) is never displayed. When this happens it is either hold in the power button or do a remote login to use the command line to force a reboot. This problem has existed for many months (multiple Mac OS X updates).
When this happens there are typically two users logged in. One an administrator and one a regular user with a few limitations. Parental Controls are enabled for the second account.
I tried searching the forum and couldn't find a solution mentioned. I apologize if there is one mentioned. Any help would be appreciated. This is a big issue since this is the machine my young kids use and they're not techie enough to reboot without risking corrupting file systems.
Mac Mini 2.26GHz
Mac OS X 10.6.7
Has one External drive connected and always on
Is set to never sleep (it acts as a server)
Is set to reboot on power outages

Okay, this is strange. I tried restarting three times yesterday with the same results. In fact I left it go overnight only to find the next morning that the bar was still stuck at 30%. I did a hard boot a little bit ago and waited a few seconds. I restarted an it booted up fine.
Larry

Active Directory Users and Computer not displaying column data?

I am running Windows 8.1 Enterprise with RSAT installed. My Domain controllers are Server 2008 R2.
I am having and issue with Active Directory Users and Computers. Typically I will turn on Advanced Features and then add Columns for Email address and Display Name. This for example allows me to easily export lists of users and there email
addresses among other things.
The issue is that on my Windows 8.1 client, the columns for Email and Display Name are empty. It simply will not display this information. It only displays Name, TYpe and Description.
If I use a Windows 7 client, the information displays correctly.
Has anyone run into this issue or heard of this problem when using ADUC on Windows 8.1?

ADUC is an AD tool that is no longer being improved, with Microsoft now focusing on ADAC (Administrative Center). In 8.1, it has improved quite a bit since 7. You can also just try using the
ActiveDirectory PowerShell Module, which is easy to use and fairly powerful. It can be simple to export lists, and the module for AD is included with RSAT tools.
Example:
Import-Module ActiveDirectory
Get-ADUser -Filter {Manager -eq "John.Smith"} -Properties DisplayName,Mail | Export-Csv dump.csv -NoTypeInformation
So, recommendation: either use ADAC, or PowerShell -- ADUC is part of the wave of deprecation.

Distribution group owner field in GAL not displaying for configured owner.

Quick question: for a configured DG owner to show up in the owner field when the properties are selected via Outlook using the GAL, does the owner need to also be a member of the group for the field to display that person? We have a case here where the owner
is configured in Exchange, but does not display in Outlook. I checked other groups and when the owner does display in Outlook, the owner is always a member of the group in question also.
Thanks!

Thanks for the reply. Yes, I do see her as the MagedBy user:
[PS] C:\Windows\system32>Get-DistributionGroup .globalpeopleleaders | Ft Managedby
ManagedBy
{cds.int/Canada/Users/Laptop Users/Heutzenroeder, Audrey}
Yet, in Outlook the owner field in the properties of the DG is emtpy.
I'm told that she was made manager of the group 18 months ago.

Master-detail: detail field not displayed after changed by master field

I want to use the Depends on item with Clear/refresh value functionality in a master detail situation. Within the same group it is no problem to use the setter method of a field to change a second field and then displaying this new value. But in the detail group, I can not select items from the master group as a depends on item.
In the setter of the master field, the value in a field for each row in the detail (table layout) is updated. The only problem is that this updated value is not displayed, the old value doesn't change. When saving the changes, the displayed value is committed to the database. When de updated field is not displayed at all, the correct value is saved, so I know the detail field is updated.
How can I make sure the displayed value in the detail is displayed after changeing a master field? I already gave the detail field the correct partial trigger.

Wouter,
I guese you don;t see the changed value when you display the detail item because after the depends on item update changed the detail item, JSF procesing continues and the detail table changes are sent to the server which will override again the detail item attriibute, resetting it to the old, still displayed value.
So, the trick is to get PPR working. Make sure the partialTYriggers property of the detail item is set to the value of the id property of the master item. If it still doesn't work, try setting the partial triggers property on the table, instead of the individual item.
Steven Davelaar,
JHeadstart team

ALV Title Not Display after transporting the Programme from DeV to Qlty

Hellow Experts,
i developed one ALV report with two screens, i transported the report from Development server to Qulaity server.
in Development server report are working fine but in Qulaity server after transporting the TiTle of ALV not display , plz give me some hint , below is my code to display alv title
DATA: alv_grid       TYPE REF TO cl_gui_alv_grid.
DATA:alv_grid_ref type ref to CL_GUI_ALV_GRID.
DATA: layout    TYPE lvc_s_layo.
layout-grid_title = 'Daily Material Reports.' .
DATA: fieldcat TYPE lvc_t_fcat.
I m using ALL METHOD alv_grid->set_table_for_first_display method for display alv .
Thanks,
Regards
Neha.

Hi neha,
use the sap/help link to solve your issue,
[http://help.sap.com/saphelp_erp2004/helpdata/en/0a/b5533cd30911d2b467006094192fe3/content.htm]
if not use the below example code ,
Heading 3 :h3 Set the title of the grid
Fill the grid_title field of structure lvc_s_layo.
Note that the structure lvc_s_layo can be used for to customize the grid appearance in many ways.
DATA:
ALV control: Layout structure
gs_layout TYPE lvc_s_layo.
For example :
Set grid title
gs_layout-grid_title = 'Flights'.
CALL METHOD go_grid->set_table_for_first_display
            EXPORTING
           i_structure_name = 'SFLIGHT'
is_layout      =gs_layout*
           CHANGING
          it_outtab   = gi_sflight.
Regards,
Saravana.S
Edited by: saravanasap on Dec 21, 2011 8:13 AM

Fonts do not display after update

I just updated with the most recent release of Lion and now certain fonts do not show up on web sites and in some applications, including Apple's own iCal!
Can someone help!!

Restart your Mac and immediately hold down the Shift key when you hear the startup chime to boot into Safe Mode. Keep holding the Shift key until you see a progress bar towards the bottom of the screen. You can let go of the Shift key at that point.
OS X asks you to log in (you will get this screen on a Safe Mode boot even if your Mac is set to automatically log in). Let the Mac finish booting to the desktop and then restart normally. This will clear Font Book's database and the cache files of the user account you logged into in Safe Mode.
When back at the desktop from a normal startup, close all running applications. From an administrator account, open the Terminal app and enter the following command. You can also copy/paste it from here into the Terminal window:
sudo atsutil databases -remove
Terminal will then ask for your admin password. As you type, it will not show anything, so be sure to enter it correctly.
This removes all font cache files. Both for the system and the current user font cache files. After running the command, close Terminal and immediately restart your Mac.

Cn=Users domain is not displaying after configuring new object class in OAM

Similar Messages

Maybe you are looking for