CN216B B210a printer. Replacement ink pad advice needed.

Hi Everyone. Apologies if this question has already been asked and answered but I'm new to this forum.
I have a 12 month old HP Photosmart B210a (CN216B) printer. The ink overflow pads in the base are quite full. I need to remove them and either clean or replace them. To do this, I need to be able to disassemble the unit to enable me to gain access. Can anyone offer advice please or point me in the direction of a service manual. I should add that I'm a qualified electrician but have only limited knowledge of printer construction (just enough to know that it's better to proceed with the right advice rather than dive in !). Many thanks in advance. Ed
This question was solved.
View Solution.

Hi,
The space under the parking point should be enough to clean. Regarding service manuels I dont think that they are available for consumers, i myself never seen one.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution"

Similar Messages

HP Officejet Pro 8600 - Now won't print in Black Ink Only!

Hi! After previously owning the Hp Officejet 8500a pro and experiencing numerous issues related to the 'Black Only' printing! We then decided to scrap the HP Officejet 8500a and move on to a new printer! We did a LOT of research into the new printer and at the time of purchasing the 8600 around August 2012 last year, we found no online content of similar issues relating to the 8500. We even contacted Live HP support to check if the 8600 would print in Black Ink Only with the colours cartridges levels at empty. The HP live chat representative informed us the printer WOULD indeed print in black only with all COLOUR cartridges installed and empty. Since we bought the new 8600, we have replaced just the Black setup cartridge with a Genuine HP Black 950xl. A few days ago all colours where at about 10% levels, apart from the yellow which then ran empty. We have been printing in Black Ink Only with the following message appearing, since the yellow ran out: "Yellow Cartridge out of ink, click continue to print in Black Ink only" As of this morning, the below message appeared with no option to print ink black only! "Depleted cartridges must be replaced to resume printing" The Yellow and now Magenta where out of ink, with no option but to purchase both cartridges, we replaced them and ran off 8 order sheets in Black Ink Only. Both cartridges where replaced with Genuine HP. Directly after printing these 8 pages, the current Ink Levels are now: Magenta - 100% fullCyan - Has now ran out with a Red X (Annoying!!!)Yellow - Is showing a 10% Ink level with a brand new cartridge installed!!!Black - 40% full 1. Why am I no longer able to print in Black Ink Only with the empty colour cartridges installed?2. Why is the Yellow showing 10% full with a brand new ink cartridge installed full of ink? Does anyone have any advice on how to resolve this, I would very much appreciate some imput. Kind RegardsKev Challis

I know it won't print without a cartrige. I was trying to explain that this "problem" is one that needs to be prepared for in advance by not having empty cartriges installed. I am not trying to find a way around the way the printer is made to function. My printer came with the color cartriges that I plan on having for a long time because I rarely need to print anything in color. The link Jason posted clearly states that this printer, being a IIC, needs all cartriges installed in order for it to print. Here is the section: For example, a driver color setting (by selecting "print in grayscale with the black cartridge only" in printing preferences) specifies printing using only black ink. In addition, many IPH printers can operate in "reserve mode," which allows the user to continue to print with just the black cartridge when the color cartridge is removed or not installed. In HP IIC systems, all supplies are required to be installed in the printer for the printer to function. (empahsis mine) Why it needs all supplies installed to function? I don't know and don't care. Why does it not print with empty color cartriges installed (the first question of the person that started this thread)? I don't know and it doesn't really matter. Have one set of color cartriges on reserve in case one of the ones you have runs out of ink. Don't want to hassle with this "problem"? Own another printer that is not an IIC inkjet printer.

Hp photosmart plus printer will not copy or print in black ink

HP Photo Smart Plus will not print black. I can get other colors to print. I have used print Doctor to diagnose and
could not find a problem. I did get printer to print black and all colors on test page. When printing I do not get a error message other than a red x. I have also tried a different ink cartidge with no results.

Hi Dee54321,
Thank you for visiting the HP Support Forums! I see you are not able to print in black ink on your HP Photosmart Plus B210a.
I would like you to continue here: Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages, I understand you may have done some of these steps already but I need you to complete all steps in order to resolve the missing black issue you are experiencing.
Please note: There are three printhead cleaning stages. Complete all three stages if necessary. If the printhead is badly clogged, it might require another cleaning cycle. If so, wait 30 minutes after the last (third) cleaning stage to start the first stage of the cleaning process over again.
If you are still unable to print in black ink, I suspect the issue may be the printer and not the cartridge. I highly recommend you call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www.hp.com/cgi-bin/hpsupport/index.pl
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

PhotoSmart Plus E B210A Printer Settings

I just bought the Photosmart Plus E (B210a) printer, and I think some settings are missing in the printer properties/preferences. Usually "Color Management" (advanced) seems to provide a wide variety of adjustments to the ink settings. All I get are monitor/display menus.
The printer is very nice, and It seems to be functioning normally, but I can't find any menus to adjust color saturation (for the individual inks), brightness, cool/warmth, sharpness, etc. There were also presets for draft, best, charts & graphs, and others to select for quick setting adjustments.
Does the B210 not offer any of these customizations? I've tried the driver on the CD and the driver from the website, and neither make a difference. My previous few Photosmart printers always had these options.
I was told to try setting the driver for the 9800 Deskjet, but that didn't help either.
Maybe I am trying to find a menu that doesn't exist, but documentation seems to hint at these settings...
Can anyone confirm that such menus exist? Anyone have an idea for a solution?
Thanks for your time.
Brian
Windows7 32-bit Ultimate, Printer is wirelessly networked

Wow, that was fast. Well, before I give you a "kudos", I should've mentioned I tried that driver. Several people referenced that, and so I used it as requested. Still, no luck.
I must admit, I didn't install the coupon option, or the bing bar, but I assume my color options don't depend upon those items being installed!
So...I've tried the driver that CD came with, the driver on HP's site, and two alternate drivers (9800 and 920c deskjets).
I'm really stumped, as I'd like to keep the printer, but nobody seems to know how to fix this issue...or if it is, indeed, an issue. Someone in Tokyo said those features don't exist for this printer (which I do not believe to be true).
I don't know if something is blocking the driver from connecting to these options, but it is very frustrating.
Brian

B210a Printer won't print yellow and anything yellow based.

I just replaced all of the ink cartridges on my Photosmart Plus B210a printer (genuine cartridges by the way) and now the printer won’t print yellow or any yellow based color (green, orange etc). Help?

This article should help resolve your blank pages:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01892627&cc=us&dlc=en&lc=en
Give the steps listed under your operating system a try and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Printer is recognised , inks seem ok, but printing blank pages

Printer is recognised , inks seem ok, but printing blank pages

This is my story, sounds like yours. Let me know if you get any help please.I will do the same.
OK, this is the craziest thing I have seen in a while. My HP printer that has worked flawlessly for years with my Windows XP PC, printed an incomplete page. I tried to print the page once more, it went through the motions of printing, paper feed, printer head went back and forth. When I looked at the page there was no text printed at all, not a trace. Okay, so I must be out of ink, checked the level in tools and it said about a quarter was left. The heck with it, lets put a new ink cartridge in. Did it, checked the level again, now full. Printed the same page and it went through the motions of printing, paper feed, printer head went back and forth. When I looked at the page there was no text printed at all, not a trace. I tried the printer from my laptop, same thing. My wife PC, same thing. So the printer must be dead. This is where it gets crazy! I had a new printer from a combo PC purchase I made in December. I installed the NEW HP printer and the drivers, everything went fine. I printed the test page which is two pears (fruit) in COLOR and it printed fine. Great I am back up and running. Tried to print the page that failed on the old printer and the same thing happened. Are you kidding me! Tried the new printer from my laptop and the same thing happened, no text. It will print in Paint, in color and black. It will print from HP software when printing pictures in color and black and white. It will print from my email suite (Thunderbird) in color and black. It won't print in Open Office in color or black. It won't print in Word, in color and black. It won't print in Word Pad or Note Pad in color and black. New printer, new ink, I don't understand. PLEASE HELP ! Thank you for your time. Windows XP, USB cable, New Deskjet D1341.

HT1695 I have Canon MG3250 air printer but I am unable to print from my I-pad, please can you help?

Please help me to be able to print from my Canon MG3250 Air printer from my I pad.

Your printer is AirPrint capable - make sure your iPad and the printer are on the same WiFi network.
Here's a guide that includes troubleshooting tips:
AirPrint Basics

AirPort Extreme 6th gen, not recognize my printer HP deskjet ink advantage 1515

I have AirPort Extreme 6th gen, it can not recognize my printer HP deskjet ink advantage 1515.
I already contact hp support and they reply my printer is support by AirPort Extreme. This is the link web statement http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00710847&tmp_task=useCatego ry&cc=us&dlc=en&lc=en&product=5385208#N59
Also doing all instruction on the web, update firmware for AirPort Extreme and my ipad to latest firmware.
But until now I can not share my printer through my AirPort Extreme 6th gen in my network.
Anyone know how to solve this problem?

Hi tonyioancy,
Welcome to the HP Support Forums! I see you are running into a few problems with your HP Deskjet Ink Advantage 1515.
I would like you to run the HP Print and Scan Doctor- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
If you run the PSDR and are still experiencing the issues, please contact our technical support at 800-474-6836 as your printer may still be in warranty. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www.hp.com/cgi-bin/hpsupport/index.pl
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Print in Black ink only - HP LaserJet Pro 100 color MFP M175nw

Hi, I have a HP LaserJet Pro 100 color MFP and use Mac OSX. How do I print in black ink only? I want to turn the colour ink off . . . I'd greatly appreciate any help. Thanks in advance!

Hello @Bob_Loblaw ,
Welcome to the HP forum.
I understand that you want to print in grey scale. I would like to help you with this.
I found some instructions on Cnet. How to print in grayscale in OS X.
There is also a short video on YouTube. Print Black and White on a Mac
Hope you find these helpful.
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

HP Photosmart 5510 will not print in black ink

Hello, I started having an issue with my photosmart 5510. It slowly stopped printing in black in. I started printing, it printed a few pages normally, but then phased out to not printing black at all. When searching for solutions, I found a forum where an expert mentioned different instructions that have to be messaged privately, may I also have these instructions?
I have tried all the suggested steps and still no black ink, only wasting colored ink while I try one fix or another and then do a test page after each try.
I have had this printer for more than a year, possibly more than 2 years even, so it is way out of warranty and I am willing to try anything at this point.
Thank you.
PS I did try to private message the expert, but it wouldn't send due to "Your post has been changed because invalid HTML was found in the message body. The invalid HTML has been removed. Please review the message and send the message when you are satisfied." and it still wouldn't send. So here I am making a whole new thread about it :/

Hi MamaChickadee,
Welcome to the HP Support Forums! I see you are running into some print quality issues on your HP Photosmart 5510, you are unable to print in black ink.
You have completed the steps listed here: Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages, with no success and would like to try the reset on the machine. I suspect the issue may be the printer and not the cartridge and do not feel a reset would help in this situation.
I would like to get this taken care of for you as soon as possible, can you please let me know which Country/Region you are in?
I hope to hear from you soon.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

HP 5510 wil not print in black ink after installing a new black ink cartridge

My HP 5510 printer will not print in black ink after installing an official HP black ink cartridge. I see other people have had the same problem. I have gone through all the troubleshooting suggestions.
I would like to know if anyone has been able to fix this problem. I just spend money on a new XL cartridge. Any help/suggestions would be appreciated.

Hi @obxgirl,
Welcome to the HP Support Forums! I see you are running into some print quality issues on your HP Photosmart 5510, you are unable to print in black ink.
I would like you to continue here: Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages, I understand you may have done some of these steps already but I need you to complete all steps in order to resolve the missing black issue you are experiencing.
Please note: There are three printhead cleaning stages. Complete all three stages if necessary. If the printhead is badly clogged, it might require another cleaning cycle. If so, wait 30 minutes after the last (third) cleaning stage to start the first stage of the cleaning process over again.
If you are still unable to print in black ink, I suspect the issue may be the printer and not the cartridge. Please let me know which Country/Region you are in as well as the product Warranty status: HP Warranty Checker
I hope to hear from you soon.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

HP Officejet Pro L7580 how to print in black ink only

My ink cartridges were all empty but I only bought the black ink. How do I just print documents using only the black ink cartridge because everytime I try to print, it tells me I need to replace all the other color cartridges. I selected grayscale and black ink only but still get that message. My OS is Windows 7. Is there anyway around this or do I need to buy the color ones too?

Hello @Rod24,
Welcome to the HP Forums!
I understand you only replaced the black, instead of the color inks because you only want to print in black ink. I will do my best to assist you! Looks like you need to replace the color ink cartridges as well in order to print black ink.
I looked in the manual here. It doesn't state anything about using single-mode ink cartridge. Please let me know if you have any further questions. Have a great day!
I worked on behalf of HP.

I have a Mac and use an EPSON NX510 printer. I would like my printer to only print in black ink unless I otherwise indicate. How do I do this?

I have a Mac and use an EPSON NX510 printer. I would like to print in black ink only and cannot locate how to do this?

You usually find an option to print in black and white or gray scale in the settings of your printer that come up when you choose "print" in the file menu of the program you are using at the time.
BUT, if what you want to do is print with only black ink because you are out of ink in one of the color cartridges, that is usually not possible. For some reason I can't remember, printers makers prevent the use of the printer as soon as one of the color cartridges is empty.

Office Pro 8000: Can't Print/Out of Ink Error even after installing new cartridge.

When I tried to use my printer a few days ago, I received a "Can't Print: Out of Ink" error message concerning the magenta cartridge. I had used the printer a few days before that, and had not received a low ink warning. It seemed suspicious to me that I would have received an empty cartridge error message without first receiving a low cartridge warning. The yellow and cyan cartridges read 70% full - all 3 were original cartridges.
I purchased a new 940XL magenta cartridge and installed it per instructions. Now I am getting a message that the new 940XL cartridge is empty. I can shake the old 940 cartridge and hear liquid inside. Obviously, the new cartridge is also full. I've tried cycling power, reinstalling the software, etc, with no change in status. If I swap back and forth between the old 940 and new 940XL cartridge, they are properly identified by type on my screen as the 940 or 940XL. Due to the way the problem has presented itself, I don't believe it is a cartridge issue.
Of course, problem first arouse on May 8th, and my warrantee expired April 26th. Any suggestions?
This question was solved.
View Solution.

I've solved my own problem, which was clearly a factory assembly defect. I looked inside my printer with a flashlight in the area where the ink cartridges are installed, and found magenta ink sprayed inside the printer. I disassembled the printer, and found that the magenta line had been damaged during assembly. There are four ink tubes which exit from behind the ink cartridges, then make a U turn back toward the front of the printer. Just after the U turn, they make another bend up-wards. It is at this point that I found the damaged magenta line, directly above a screw on the right-hand side of the ink cartridge housing. The lines are in a very narrow passage, and are held in place by several keepers molded out of plastic. It appears that the lines were put in place in the keepers, then the screw inserted from above. As I said, it is a very tight passage, and it would be very easy to damage the ink line at that point if the lines weren't carefully held back to insert the screw during assembly.
To solve the problem, I removed approximately 1/4 inch of damaged magenta ink line. I carefully cut the line with a sharp razor, to prevent collapsing the line or causing burrs to the tubing. I then placed about 3/4" of self-sealing heat shrink tubing over one end of the ink line. Next I spliced the line with a small piece of stiff plastic tubing from the handle of a cotton swab, which was a perfect, snug fit over the ink line. Being careful not to collapse the ink tube or cause further damage, I gently twisted the ink line back and forth until the ends were butted up inside the cotton swab splice. I then positioned the heat-shrink tubing over the splice, and shrunk it with a hair dryer. The heat-shrink tubing I used has hot-melt glue applied to the inside, which further aided in making a leak-proof splice. Again, there is not a lot of room, so the splice had to be kept small.
I reassembled the printer, reinstalled the ink cartridges, and powered up the printer. After the normal, long start-up delay, I printed several full-color test sheets, and all was fine. The magenta cartridge that I had installed previously now shows that it is full, and the remaining cartridges also read the levels that they had prior to disassembly.

How do I print in black ink only for a HP office jet 6200?

I'm new to my Macbookpro I just got and having problem printing emails,web info etc in black ink only. I have a HP officejet all in one 6200 printer and have tried but can't find any options for changing to black ink only when the print window comes up. I've checked for software updates and nothing there. I'm not very computer smart but I'm trying my best to figure this out. I've spent hours on this so far. Can anyone help me out?

Hi,
Follow the steps below in order to print using Black Ink only:
1. From the application used to print, click the File menu and select Print.
The Print window appears.
NOTE: The Print window might be minimized - Click the Show Details button to see all available settings.
2. To access the color options, click the lowest selection box listed as the name of the program (e.g. TextEdit)
Will appear as Copies & Pages within Microsoft Office applications.
3. Select Paper Type/Quality from the drop-down menu.
4. Click the triangle next to Color Options to expend the settings.
5. Set the Color field as Grayscale.
6. Set the Grayscale Mode as Black Ink Cartridge Only.
You may save the settings for future use by clicking Presets > Save Current Settings as Preset...
A used preset will remain as default till another preset will be used.

CN216B B210a printer. Replacemen​t ink pad advice needed.

Similar Messages

Maybe you are looking for

CN216B B210a printer. Replacement ink pad advice needed.