CN22 - Print Shop Floor Papers for Network Orders

Hi All,
We are printing shop floor papers for network orders - the printers are setup, configuration is working fine.
However, there is a sporadic error: when we select "Print" and then "Save" in CN22, the system pops up a window with the list of all network activities. However, for some reason, the first time this is done, only a few network activities appear on the list. If we close the pop up, then select "Print" and then "Save" again, the whole list appears. Has anyone encountered this before? I looked through OSS, but couldn't tell if any of the notes would be applicable to resolve the issue.

Hi,
I just went through the same problem. Don't know if it is still open.
In customizing under "Project System"->"Structures"->"Operative Structures"->"Network"->"Printing in Networks" you will find entry "Recommendations for printing and print control". There it is stated that the number of time tickets or number of confirmation slips entered for the activity is greater than zero.
Check in transaction OPS0 if you have set the number of prints greater than zero in menu point "List control for transactions (double clic on the entry).

Similar Messages

PM: Printing Task List Attachments When printing Shop Floor Papers

Hi,
We have PDF documents attached to our PM Task Lists. My requirement is to print out these PDF attachments when the shop floor papers (ie Maintenance Pick List) print. I am able to determine each of the files and their paths attached to the task list, but as of yet, I am unable to automatically print them. Can anyone point me in the right direction?
Also note that using OLE to print the attachments seperately is not an option - The reason for this is that the shop floor papers would go to the SAP Spooler and the attachments would go to the network print server.
Thanks!
Scott

In transaction OPK8, in forms uncheck the 'New List' check box for the List.
Regards
Ramanujan

Printing shop floor papers

Can anybody explain me how to see the print preview of production Order, Goods receipt (for MB31 transaction), Confirmation slip in Production Planning?

Hello Srinivas,
One of the way I could think of is setting the print mode as 'background processing' and the checking the print preview in spool request (Tcode : SP01).
Cheers
K

Creating single spool request for printing all shop floor papers

Hello PP Gurus,
We are printing shop floor papers at the time of releasing production order using txn CO02. It creates individual spool request for printing different shop floor papers in the same orders . eg Pick list, goods receipt list etc.
Is it possible to do the cofiguration setting to create only one spool request for all the different SF papers belong to same order.? If yes, please let me know the steps for customising this.
Thanks for your help in advance.
Regards & Thanks
Rajesh D.

In transaction OPK8, in forms uncheck the 'New List' check box for the List.
Regards
Ramanujan

Printing of shop floor papers

hi guys,
very good morning,
plz explain in details the setting for printing shop floor papers with header and components with goods issue slip and confirmations slips,
thanks in advance,
Mohan

In OPK8
Name of the list - LG01, LG03, LK02, LV02
Spool parameters - User and plant = *
Reference operation - type - *, ref order = your order type
Forms -
LG01 - PSFC_OBJECT-LIST
LG03 - PSFC_ZUGL-LIST
LK02 - PSFC_GOOD-ISS-SL
LV02 - PSFC_CONF-TICKET
Print prig -
LG01 - PPPROBJU
LG03 - PPPRZUGL
LK02 - PPPRWARS
LV02 - PPPRRUEC
List control for transaction
ref order type, plant, MRP controler-*
transaction codes - CO01, CO02, CO03, CO04, CO05, CO07
Flow control for transaction - all are online
do this setting and then create Prod order/GI/Confirm and print
come back if required.

Print out of Shop Floor Papers in Default Language

Hi Folks,
User has a requirement to Print Shop Floor Papers in German language only irrespective of log on language.
He does not want to manually select the German language in IW3D, as it picks the log on language. He wants it to be set as German language (DE)
Please suggest.

Hi,
You can try to put DE as default login language for these users in SU01 , then by default printing will happen in DE by default ..
regards
pushpa

Printing Shop floor documents

Hello Experts,
Is it possible to print the shop floor documents in production order status CRTD ?
If yes what are the settings to be done to get printing before releasing the order?
Regards,
Jejesh
Edited by: jejesh yal on Jan 27, 2009 6:47 AM

Hi,
As per Standard SAP Practice, It is not possible to print shop floor papers befere release of Production Order i.e. It must have status REL and not CRTD.
You need to maintain following settings for Printing Shop Floor Papers :
In OPK8
Name of the list - LG01, LG03, LK02, LV02
Spool parameters - User and plant = *
Reference operation - type - *, ref order = your order type
Forms -
LG01 - PSFC_OBJECT-LIST
LG03 - PSFC_ZUGL-LIST
LK02 - PSFC_GOOD-ISS-SL
LV02 - PSFC_CONF-TICKET
Print Programme -
LG01 - PPPROBJU
LG03 - PPPRZUGL
LK02 - PPPRWARS
LV02 - PPPRRUEC
List control for transaction
ref order type, plant, MRP controller-*
transaction codes - CO01, CO02, CO03, CO04, CO05, CO07
Flow control for transaction - all are online
Hope this helps.
Regards,
Tejas
Edited by: Tejas Pujara on Jan 27, 2009 6:55 AM

Manual reservation creation for Network order

Hi ,
I am trying to create manual reservation (MB21) for network (movement type 281), I am getting error message "Manual reservation for order category 20 is not allowed". Whether it is possible to create manual reservation for network order by any other way or by config change?

Dear,
Check : OSS notes 305231 and 43924
Also check: http://www.sapfans.com/forums/viewtopic.php?f=8&t=37714
Regards,
Syed Hussain.

Development of shop floor papers in Smartforms?

Hello,
To develop shop floor papares I am using standard for PSFC_STD_LAYOUT and print program PSFCOBJL for output type LG01. Is it possible to make the customization using Smartforms vs. SAPScript. In the configuration, I do not see any field which will accept Smartform object.

Hello,
Thank you for your reply.
To clarify :
For LG01 output type.
In OPK8, under Reference order types> Print program>I added the driver Smartforms.
Under Reference order types>Forms>LG01 type --> it still reads as PSFC_STD_LAYOUT. Do I need to keep this entry at all?
In your example for setting user/plant settings you are calling the same form. Would in reality they will be different forms for each plan?
read table caufvd_tab index 1.
case caufvd_tab-werks.
when '7200'.
i_formname = 'ZSF_OBJECT_LIST1'.
when '9200'.
i_formname = 'ZSF_OBJECT_LIST2'.
when others.
i_formname = 'ZSF_OBJECT_LIST3'.
endcase.
Thanks you so much in advance.

Standard print program & smart form for SALES ORDER

Hi,
I need
1. Print program &
2. SMART FORM
for "Sales Order".
and also please let me know how to migrate and do the required changes in smartform & print program.

Hi Sameer,
Goto NACE tcode-> choose the application u want( like billing for invoice, PO)->output type->output type->processing routineon left side
Here u will find the standard program name and smartform .
Thanks,
Reward If Helpful.

Shop floor paper printing

Hi Team,
I am new to use the transaction OPK8. I need to configure to print production order details for shop floor paper printing.
How to use this transaction to print shop floor papers as per our requirement?
I need to print some BOM component details and kanban control cycle informations (eg: storage bin) in the shop floor papers. Is these informations available by default in OPK8 transaction?
I am beginner to use this transaction. So your valuable guidenace required.
Thanks
psk

Hi chandan
Priniting layout can be set on your for printing shop floor paper. The required field can be set from production.
Regards
J . Saravan

Form for production order

hi experts,
i need the standard print progarm for printing production order.

Hi Vijay
the printers first need to be configured by the BASIS consutant who will assign printers to Users based on their Roles and authorizations and i think this is a Config activity and needs to be transported
also from the menu go to user profile, under own data and under defaults Tab, you need to assign the printer here and save it and first log off and then i think it should help
also check in the Control key setting in OPL8 which you have used for routings operations whether they allow printing shop floor papers and confirmations and time tickets based on your requirements
this should probably help
if useful plese reward points
regards

Sfp adobe form for production order

I need to supress printing a field within an adobe form base upon a condition. I customized print program to allow printing production orderwhen order type is RM01 but I do not want to print the barcode field OPSDATA-RUECK. I need to know how to supress printing under certain circumstances.
How do I condition a field to prevent printing?

Hi Vijay
the printers first need to be configured by the BASIS consutant who will assign printers to Users based on their Roles and authorizations and i think this is a Config activity and needs to be transported
also from the menu go to user profile, under own data and under defaults Tab, you need to assign the printer here and save it and first log off and then i think it should help
also check in the Control key setting in OPL8 which you have used for routings operations whether they allow printing shop floor papers and confirmations and time tickets based on your requirements
this should probably help
if useful plese reward points
regards

Seperate Adobe Form printing for each order

Hi,
I have a scenario where i need to print Adobe Form for each order.
Right now i am handling this from print program(Executable) by looping at the Adobe form FM for each order.
So it will print seperate Adobe form for each order with corresponding Header & Item Data.
To get next order i need to hit on right & last arrows etc...
So right now i am handling it through Print Program.
Is there any way it can be handled directly at Adobe Form level.
By passing all orders to Adobe FM at a time (Intsead of looping) and handling Adobe Form printing for each order at Adobe Form level itself!
Thanks in advance.
Thanks,
Kumar.

simple,
create one new program not driver program . Then u have to call that FORM
1.Get all the data created during the dates.
split the data into , based on the date ranges.
2.
loop at itab1.
perform open_form
write_form
close_form
endloop.
loop at itab2.
endloop.
1) I need to print the form automatically when an Order is created.---->COnfig
2) Every June 15th and Dec 15th I need to print the form for that Order
automatically with some other data.
---> what ? what u split ?
*--Similarly I need to trigger the form in this way automatically for all Orders.
---> Config+ABAP
How can I trigger the Form automaticall for the above requirement
Regards
Prabhu

Mass printing of shopfloor papers

Hi all,
   1. Is the standard functionality of t-code COPI is to print one shopfloor paper at a time....???
   2. Is there any other t-code to process more than one shop floor papers at a time
       ie if more than one process orders are selected automatic printout should happen for all the process orders.
Regards,
Joseph.

Hi,
   In COHVPI when we select more than one process orders the printing does not happen in one stretch.....Printing is done one after the other...So if i have 10 process orders to be printed i have to take each process order printouts one by one...How can i tackle this scenario in sap....???
Regards,
Joseph.

CN22 - Print Shop Floor Papers for Network Orders

Similar Messages

Maybe you are looking for