CN41, CNS41 don't work on planning version 001 and project version

Iu2019ve an issue:
Iu2019m working on release ECC 6.0.
I did the overall planning, costs and revenues (structure planning on Project), then I saved data on project version and on planning version 001.
When I run the CN41 or CNS41 with plan data in plan version 001 (costs and revenues) and plan data (costs and revenues) in project version, the report doesnu2019t let me see the plan data in the Project version column neither in the planned cost/rev. 001 column.
The hot patches on my system is on SAPKH60013.
Any one could help me?
Pierluigi.

FYI for others searching on this issue, there are a few OSS Notes that explain this:
Note 148971 - Planned values in Project Information System
"4. The Planned costs column in the structure overview and the planning board corresponds to the Overall planned costs column in the hierarchy reports if you implemented Note 106823..
If you implemented Note 106823 (included in the standard system as of Release 4.0B), only the annual values of the WBS elements, networks and orders are displayed. Column 'Planned costs' in the structure overview and planning board corresponds to the 'Total of year'. If this effect is not desired, Note 106823 has to be removed or should not have been implemented beforehand. In addition, if you implement Note 127521, you must remove the changes in object REPS LHFPLU08 of Note 127521 (this applies to Release 30D - 31I). Any other changes can remain."

Similar Messages

I can't open video file in the page , i download and install flash many time but don't work , i use firefox 5 and windows 7

i can't open video file in the page , i download and install flash many time but don't work , i use Firefox 5 and windows 7

My current version of Chrome is having problems, too! It's so annoying. Anyone have any suggestions now? I basically can't view or download any PDFs because of this.
Does anyone else think this is a problem not only with Adobe? I would think Apple would have something to do with this? Wouldn't they get some idea from the developer versions that no browser can open PDFs while running Lion!? Pretty bad customer service on the part of a company that prides itself on being VERY customer-friendly. Wouldn't you say?

I just downloaded Yosemite OS for mac and Premier pro play buttons don't work in the Program, Source and timeline and no audio HELP?

Yosemite OS seem so not allow me to use premier pro. Specifically the play buttons don't work in the source, program and Timeline. Any one have this problem?

Hey,
I´ve got the same problem, that since i upgrade to Yosemite, my R3D Video Files are not longer supported, sometimes it works but most of time it says "not supported File format".. Hope Adobe will fix it.
Play button works. Try installing the latest Java 8 update. This might fix some problems.

My speakers on my mac don't work.the icon is dimmed and it won't let me play music or Skype.it tells me i have a problem with my speakers

my speakers on my mac don't work.the icon of the speaker is dimmed and it won't let me play music or Skype.it tells me i have a problem with my speakers

you may have flipped the micro switch inside the audio jack. To rectify this issue take a toothpick an gently wiggle it inside your audio jack.

I have the latest version of Thunderbird, my hyperlinks used to work fine now they don't work anymore I can send and receive email

I am running version 24.4.0 I can send and receive email but when I get an email that has a hyperlink that I click on and go to. But we don't go anywhere, I tried running in the safe mode that that help, tried rebooting that didn't help. I have an earlier version on my laptop that works fine.

https://support.mozilla.org/en-US/kb/Hyperlinks-in-Messages-Not-Working

Authorization-based formulas don't work in planning-query

Hi specialists,
I've got some trouble with authorization-based formulars in a query on an aggregation-level.
The forumulars are used for filtering. The problem is, that the filters remain empty - obviously no filter-values are pulled from the authorizations. The query-execution ends in the following error-message: "You are not authorized to use the object zcomp_code 'SomeName - Authorization-Object'"
Exactly the same variables are used in a second query as well - which is based on the the same cube as the aggregation-level. In this query the variables are filled (as expected) with the values from the authorizations.
In RSSM one can see that the relevant info-objects are marked as authorization-relevant for the above mentioned cube. For the aggregation-level I cannot configure them as authorization-relevant (because the fields are not editable/grayed-out).
Does anybody know this problem ?
Are there any hints how to check-out the concrete problem ?

In iOS7, location-based reminders won't fire if the Reminders app is explicitly terminated by the user.
That is if the user removes an application from the Multi-Tasking application list (brought up with a double-press of the Home button), iOS 7 will conclude that the user doesn't want this app to get any more run-time. That implies that Reminders won't be launched again to display your location-based reminders.
The Reminders app needs to be running in the foreground or to be put in the background for location-based reminders to work.
This is not a bug. This is intended behavior.

Facetime Audio don´t work with 10.10.2 and iOS 8.1.3

Hello!
After the Upgrade to Yosemite 10.10.2 on my Mac Pro and iOS 8.1.3 on my iPhone 5 i cannot make Facetime Audio Calls anymore. The Problem is that when i get a call or make a call i can hear the people but they dont hear me. The settings don´t change. The Microphone on my Logitech Webcam is selected in Facetime App and in audio settings but it dont works. The Microphone is not broken i tested it with Quicktime.

i Must correct again. With soundblaster drivers deinstalled Facetime Works better as before but the bug was already there. Sometimes my voice disappeared and the caller don´t hear me. i think there is a Bug between Yosemite 10.10.2 and iOS 8.13 and i hope with 10.10.3 and 8.2 this bug was fixed.

Custom Split views don't work like the use to pre- Project 2010

Hi
Either we've lost some functionality along the way, or there must be another way of doing the following...
Up until and including version 2007, I was able to create multiple custom split views in a file (or global.mpt) where the I could specify a different Task Form (e.g., "Predecessors & Successors" or the "Work") depending on which custom
split view I selected.
In 2010 and 2013, you have to manually select the Task From you want; the custom split view won't can help you get the specific Task Form you want ((e.g., "Predecessors & Successors", "Work"). At least that has been my experience...
does anyone have a solution apart from needing to write a VBA event handler?
Thanks in advance,
\Spiro Theopoulos PMP, MCITP. Montreal, QC (Canada)

I agree with Dale. Project remembers the last set of details applied in form views such as Task Form. Using VBA event handlers you can change this behavior.
1. Open the project file on which this change should be applied.
2. In the View ribbon, click Macro command and select Visual Basic
3. If you want the details displayed in the Task Form to be applied to the current file, double click "ThisProject" node under the VBAProject(your file name) or else double click "ThisProject" node under ProjectGlobal (Global.MPT)
4. Paste below lines in the Project_Open event handler. Save the code.
Private Sub Project_Open(ByVal pj As Project)
    ViewApplyEx ApplyTo:=1, BuiltInView:=pjViewTaskForm
    WindowActivate TopPane:=False
    ViewShowPredecessorsSuccessors
End Sub
5. You can replace the last statement ViewShowPredecessorsSuccessors with another statement that is compatible with Task Form view
Sai PMP, PMI-SP, MCTS Project, MVP Project

Download links don't work, tabs won't close, and firefox not responding

Everything was working fine yesterday until I updated my computer with windows update. Aft5er that I wasn't able to download any gaming links from the piratesbay and other gaming sites, I would look to see what is wrong the I look in the url and I see a box with a circle with a line crossed over it like it wouldn't allow me to click the link. When I hover my arrow over it it would give me an option of allowing the blocked pop up, edit it etc. I did everything by clicking 'allow pop up,' 'block pop up,' everything, but it still didn't work. There are times where I would give up on downloading the link and exit the tab but then it wouldn't let me. I tried going to other tabs and it won't let me either. SO I had to restart firefox and it worked normally again.
I could hide firefox web browser but nothing else, yesterday I could exit the browser but when I click on it it won't work until I restarted my computer. Now, today I can't exit of firefox browser, so I had to restart my computer with the browser still active. Only then, did everything worked normally again. However, it would repeat the same process over and over.
What is wrong with firefox? I don't want to keep restarting my computer each time this happens.

Hello,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state '''while saving your essential information.'''
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.

Ever since the latest update on my ipod alot of my apps don't work. Screen turns black and it bring me back to my home page.

Ever my last ipod update alot of the apps don't seem to work. everything goes black then it kicks me out to home screen. my ipod is also slower then it was before.

same problem here. Has there been any update on how to fix it?

When I click on links in websites the links don't work unless I right click and choose open website in another tab/window. This is even a problem on the Firefox page.

When I try to open a link on any page/website Firefox does not open the link. It doesn't even "work" at opening the link, it just sits idling. I have to right click and choose "open link in new tab/window" in order for Firefox to open the link. It doesn't happen 100% of the time but happens especially if there is a button or picture that must be clicked. Simple text links seem to work more often then button or picture links. One example provided below. When you click on the "launch Jumpstart" button it will not open unless you right click & open new. This also happens from my Yahoo! Email account, on Facebook, Cructhfield.com and other websites with "button" related links.

I have the same problem but it appears that an add-on I'm using is causing the problem. Try opening Firefox in safe mode (which disables add-ons) Then try it. If that solves the problem, you need to disable all your add ons and enable them one by one to figure out which one(s) is causing the problem.
[http://www.chowins.com David Chowins]

Quite disgusted that the flash drive and camera kit don't work with apples usual ease and style. Fix it and redeem yourselves.

when will you fix this issue?

We are just fellow users here, these forums are not monitored by Apple - if you want to leave feedback for Apple then you can do so here http://www.apple.com/feedback/ipad.html
But in terms of the camera connection kit, it works as it is specified- as an SD card reader and as a direct connection to a camera. It is not advertised as being a flash drive connection kit.

MSXML6.dll method"SEND" don't work in Windows Server 2012 and SQL 2008R2

Hi all,
I have a SP to send a WebService data
It works fine on Windows 2008R2 server and also on Windows Server 2003.
moving it on Windows Server 2012 with SQL 2008R2 express (32bit) or SQL 2012 express (32bit), it doesn't work anymore.
Below the SP.
-- =============================================
-- Author: Giancarlo MADA Service 2008
-- Create date: 09/09/2008
-- Description: Web Service Interface
-- =============================================
CREATE PROCEDURE [dbo].[spmd_HTTPRequest]
@URI varchar(2000) = '',
@methodName varchar(50) = '', -- POST, GET
@requestBody varchar(8000) = '', -- XML Document envelope
@SoapAction varchar(255),
@UserName nvarchar(100), -- Domain\UserName or UserName
@Password nvarchar(100),
@responseText varchar(8000) output
as
SET NOCOUNT ON
IF @methodName = ''
BEGIN
select FailPoint = 'Method Name must be set'
return
END
set @responseText = 'FAILED'
DECLARE @objectID int
DECLARE @hResult int
DECLARE @source varchar(255), @desc varchar(255)
EXEC @hResult = sp_OACreate 'MSXML2.ServerXMLHTTP.6.0', @objectID OUT
IF @hResult <> 0
BEGIN
EXEC sp_OAGetErrorInfo @objectID, @source OUT, @desc OUT
SELECT hResult = convert(varbinary(4), @hResult),
source = @source,
description = @desc,
FailPoint = 'Create failed',
MedthodName = @methodName
goto destroy
return
END
-- open the destination URI with Specified method
EXEC @hResult = sp_OAMethod @objectID, 'open', null, @methodName, @URI, 'false', @UserName, @Password
IF @hResult <> 0
BEGIN
EXEC sp_OAGetErrorInfo @objectID, @source OUT, @desc OUT
SELECT hResult = convert(varbinary(4), @hResult),
source = @source,
description = @desc,
FailPoint = 'Open failed',
MedthodName = @methodName
goto destroy
return
END
-- set request headers
EXEC @hResult = sp_OAMethod @objectID, 'setRequestHeader', null, 'Content-Type', 'text/xml;charset=UTF-8'
IF @hResult <> 0
BEGIN
EXEC sp_OAGetErrorInfo @objectID, @source OUT, @desc OUT
SELECT hResult = convert(varbinary(4), @hResult),
source = @source,
description = @desc,
FailPoint = 'SetRequestHeader failed',
MedthodName = @methodName
goto destroy
return
END
-- set soap action
EXEC @hResult = sp_OAMethod @objectID, 'setRequestHeader', null, 'SOAPAction', @SoapAction
IF @hResult <> 0
BEGIN
EXEC sp_OAGetErrorInfo @objectID, @source OUT, @desc OUT
SELECT hResult = convert(varbinary(4), @hResult),
source = @source,
description = @desc,
FailPoint = 'SetRequestHeader failed',
MedthodName = @methodName
goto destroy
return
END
declare @len int
set @len = len(@requestBody)
EXEC @hResult = sp_OAMethod @objectID, 'setRequestHeader', null, 'Content-Length', @len
IF @hResult <> 0
BEGIN
EXEC sp_OAGetErrorInfo @objectID, @source OUT, @desc OUT
SELECT hResult = convert(varbinary(4), @hResult),
source = @source,
description = @desc,
FailPoint = 'SetRequestHeader failed',
MedthodName = @methodName
goto destroy
return
END
-- send the request
EXEC @hresult = sp_OAMethod @objectID, 'send', NULL, @requestBody
IF @hResult <> 0
BEGIN
EXEC sp_OAGetErrorInfo @objectID, @source OUT, @desc OUT
SELECT hResult = convert(varbinary(4), @hResult),
source = @source,
description = @desc,
FailPoint = 'Send failed',
MedthodName = @methodName
goto destroy
return
END
declare @statusText varchar(1000), @status varchar(1000)
-- Get status text
exec sp_OAGetProperty @objectID, 'StatusText', @statusText out
exec sp_OAGetProperty @objectID, 'Status', @status out
select @status, @statusText, @methodName
-- Get response text
exec sp_OAGetProperty @objectID, 'responseText', @responseText out
IF @hResult <> 0
BEGIN
EXEC sp_OAGetErrorInfo @objectID, @source OUT, @desc OUT
SELECT hResult = convert(varbinary(4), @hResult),
source = @source,
description = @desc,
FailPoint = 'ResponseText failed',
MedthodName = @methodName
goto destroy
return
END
destroy:
exec sp_OADestroy @objectID
SET NOCOUNT OFF
The underlined portion is the one that gives error, reported below.
"Msxml6.dll 0x80070057 The parameter is incorrect. Send failed POST"
Previously the SP used MSXML3.dll and also with that it gives the same problem.
I can't understand what the wrong parameter is.
Even because, as mentioned at the beginning, everything works fine on windows server 2008R2 and Windows Server 2003
Some ideas?

Hello,
We have built a dll via CLR on the database.
Below is the code.
If you want to send the file SOAP.dll. Give me an e-mail ..
USE MydatabaseGO
/****** Object: SqlAssembly [SOAP] Script Date: 03/05/2014 12:59:14 ******/
CREATE ASSEMBLY [SOAP]
AUTHORIZATION [dbo]
FROM MyPath\SOAP.dll
WITH PERMISSION_SET = EXTERNAL_ACCESS
GO
USE Mydatabase
GO
/****** Object: StoredProcedure [dbo].[spmd_HTTPRequest3] Script Date: 03/05/2014 12:53:32 ******/
CREATE PROCEDURE [dbo].[spmd_HTTPRequest3]
@URI [nvarchar](4000),
@methodName [nvarchar](4000),
@requestBody [nvarchar](4000),
@SoapAction [nvarchar](4000),
@UserName [nvarchar](4000),
@Password [nvarchar](4000),
@responseText [nvarchar](4000) OUTPUT
WITH EXECUTE AS CALLER
AS
EXTERNAL NAME [SOAP].[StoredProcedures].[spmd_HTTPRequest3]
GO
Now call the new SP called spmd_HTTPRequest3
By..

XORG: Keyboard don't work right

Hi,
after the last System update my keyboard (under xorg) is totally messed up! The arrow keys,the del key the Pos1 key, the End key..... all don't work. All characters numbers and special characters like(!"§$%&/....) work though. Even the German "Umlauts" are working!
Here my xorg.conf:
# File generated by xorgconfig.
# Copyright 2004 The X.Org Foundation
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
# Refer to the xorg.conf(5) man page for details about the format of
# this file.
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the font modules
# Load "type1"
Load "freetype"
# Load "xtt"
# This loads the GLX module
# Load "glx"
# This loads the DRI module
# Load "dri"
EndSection
# Files section. This allows default font and rgb paths to be set
Section "Files"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
# FontPath "/usr/lib/X11/fonts/local/"
# FontPath "/usr/lib/X11/fonts/misc/"
# FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/Type1/"
# FontPath "/usr/lib/X11/fonts/TrueType/"
# FontPath "/usr/lib/X11/fonts/freefont/"
# FontPath "/usr/lib/X11/fonts/75dpi/"
# FontPath "/usr/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/lib/modules"
EndSection
# Server flags section.
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
# Option "DontVTSwitch"
# Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# Input devices
# Core keyboard's InputDevice section
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
EndSection
# Core Pointer's InputDevice section
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Auto" # Auto detect
Option "Device" "/dev/input/mice"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7. Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.
Option "ZAxisMapping" "4 5 6 7"
# Emulate3Buttons is an option for 2-button mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Monitor section
# Any number of monitor sections may be present
Section "Monitor"
Identifier "My Monitor"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 31.5 - 64.3
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-100
EndSection
# Graphics device section
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xorgconfig:
Section "Device"
Identifier "** ATI Radeon (generic) [radeon]"
Driver "radeon"
#VideoRam 262144
# Insert Clocks lines here if appropriate
EndSection
# Screen sections
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "** ATI Radeon (generic) [radeon]"
Monitor "My Monitor"
DefaultDepth 24
Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1400x1050" "1280x1024" "1024x768"
ViewPort 0 0
EndSubsection
EndSection
# ServerLayout sections.
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
# Section "DRI"
# Mode 0666
# EndSection
and the corresponding log:
X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.27-ARCH i686
Current Operating System: Linux stella 2.6.27-ARCH #1 SMP PREEMPT Fri Nov 28 10:56:24 UTC 2008 i686
Build Date: 05 December 2008 09:10:55PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Dec 9 17:03:13 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "My Monitor"
(**) | |-->Device "** ATI Radeon (generic) [radeon]"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd' or 'mouse' will be disabled.
(WW) Disabling Mouse1
(WW) Disabling Keyboard1
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81d5900
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 4.1
X.Org XInput driver : 2.1
X.Org Server Extension : 1.1
X.Org Font Renderer : 0.6
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0@1:0:0) ATI Technologies Inc RV350 [Mobility Radeon 9600 M10] rev 0, Mem @ 0xa8000000/0, 0xe0010000/0, I/O @ 0x0000c100/0, BIOS @ 0x????????/131072
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded by default.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.5.3, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(==) AIGLX enabled
(==) Exporting typical set of GLX visuals
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 6.9.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 4.1
(II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610, ATI RV670,
ATI Radeon HD3870, ATI Radeon HD3850, ATI RV670,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE, ATI Radeon HD 3470,
ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Mobility Radeon HD 3430,
ATI Mobility Radeon HD 3400 Series, ATI FireMV 2450, ATI FireMV 2260,
ATI FireMV 2260, ATI ATI Radeon HD 3600 Series,
ATI ATI Radeon HD 3650 AGP, ATI ATI Radeon HD 3600 PRO,
ATI ATI Radeon HD 3600 XT, ATI ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics
(II) Primary Device is: PCI 01@00:00:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) RADEON(0): MMIO registers at 0x00000000e0010000: size 64KB
(II) RADEON(0): PCI bus 1 card 0 func 0
(**) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 0.1.0
ABI class: X.Org Video Driver, version 4.1
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP)" (ChipID = 0x4e50)
(--) RADEON(0): Linear framebuffer at 0x00000000a8000000
(II) RADEON(0): AGP card detected
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Video Driver, version 4.1
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(II) RADEON(0): Legacy BIOS detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.29.0
(==) RADEON(0): Page Flipping disabled
(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Generation 2 PCI interface, using max accessible memory
(II) RADEON(0): Detected total video RAM=65536K, accessible=131072K (PCI BAR=131072K)
(--) RADEON(0): Mapped VideoRAM: 65536 kByte (128 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) RADEON(0): Max desktop size set to 2560x1200
(II) RADEON(0): For a larger or smaller max desktop size, add a Virtual line to your xorg.conf
(II) RADEON(0): If you are having trouble with 3D, reduce the desktop size by adjusting the Virtual line to your xorg.conf
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEON(0): ref_freq: 2700, min_out_pll: 20000, max_out_pll: 35000, min_in_pll: 40, max_in_pll: 3000, xclk: 20000, sclk: 200.000000, mclk: 390.000000
(II) RADEON(0): PLL parameters: rf=2700 rd=6 min=20000 max=35000; xclk=20000
(II) RADEON(0): Bios Connector table:
(II) RADEON(0): Port0: DDCType-0x60, DACType-1, TMDSType-1, ConnectorType-1
(II) RADEON(0): Port4: DDCType-0x0, DACType-0, TMDSType-0, ConnectorType-7
(II) RADEON(0): Port5: DDCType-0x0, DACType-2, TMDSType-0, ConnectorType-5
(II) RADEON(0): Output VGA-0 using monitor section My Monitor
(II) RADEON(0): I2C bus "VGA-0" initialized.
(II) RADEON(0): Output LVDS has no monitor section
(II) RADEON(0): Panel ID string: AUO
(II) RADEON(0): Panel Size from BIOS: 1400x1050
(II) RADEON(0): BIOS provided dividers will be used.
(WW) RADEON(0): LVDS Info:
XRes: 1400, YRes: 1050, DotClock: 108000
HBlank: 240, HOverPlus: 48, HSyncWidth: 112
VBlank: 15, VOverPlus: 1, VSyncWidth: 3
(II) RADEON(0): Output S-video has no monitor section
(II) RADEON(0): Default TV standard: NTSC
(II) RADEON(0): TV standards supported by chip: NTSC PAL
(II) RADEON(0): Port0:
Monitor -- AUTO
Connector -- VGA
DAC Type -- Primary
TMDS Type -- None
DDC Type -- 0x60
(II) RADEON(0): Port1:
Monitor -- AUTO
Connector -- LVDS
DAC Type -- None
TMDS Type -- None
DDC Type -- 0x0
(II) RADEON(0): Port2:
Monitor -- AUTO
Connector -- STV
DAC Type -- TVDAC/ExtDAC
TMDS Type -- None
DDC Type -- 0x0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
finished output detect: 0
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
finished output detect: 1
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
finished output detect: 2
finished all detect
before xf86InitialConfiguration
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
in RADEONProbeOutputModes
(II) RADEON(0): Added native panel mode: 1400x1050
(II) RADEON(0): Adding Screen mode: 1280x1024
(II) RADEON(0): Adding Screen mode: 1024x768
(II) RADEON(0): Total number of valid Screen mode(s) added: 2
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
(II) RADEON(0): Output VGA-0 disconnected
(II) RADEON(0): Output LVDS connected
(II) RADEON(0): Output S-video disconnected
(II) RADEON(0): Using user preference for initial modes
(II) RADEON(0): Output LVDS using initial mode 1400x1050
after xf86InitialConfiguration
(==) RADEON(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) RADEON(0): Using XAA acceleration architecture
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.2.0
ABI class: X.Org Video Driver, version 4.1
(==) RADEON(0): Assuming overlay scaler buffer width is 1920
(II) RADEON(0): No MM_TABLE found - assuming CARD is not TV-in capable.
(!!) RADEON(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) RADEON(0): RADEONScreenInit a8000000 0 0
Entering TV Save
Save TV timing tables
saveTimingTables: reading timing tables
TV Save done
(II) RADEON(0): Dynamic Clock Scaling Disabled
(==) RADEON(0): Using 24 bit depth buffer
(II) RADEON(0): RADEONInitMemoryMap() :
(II) RADEON(0): mem_size : 0x04000000
(II) RADEON(0): MC_FB_LOCATION : 0xabffa800
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): Using 32 MB GART aperture
(II) RADEON(0): Using 1 MB for the ring buffer
(II) RADEON(0): Using 2 MB for vertex/indirect buffers
(II) RADEON(0): Using 29 MB for GART textures
(II) RADEON(0): Memory manager initialized to (0,0) (1408,8191)
(II) RADEON(0): Reserved area from (0,1200) to (1408,1202)
(II) RADEON(0): Largest offscreen area available: 1408 x 6989
(II) RADEON(0): Will use front buffer at offset 0x0
(II) RADEON(0): Will use back buffer at offset 0xd10000
(II) RADEON(0): Will use depth buffer at offset 0x1382000
(II) RADEON(0): Will use 38912 kb for textures at offset 0x19f4000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
(II) RADEON(0): [drm] framebuffer handle = 0xa8000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(==) RADEON(0): Using AGP 4x
(II) RADEON(0): [agp] Mode 0x1f000207 [AGP 0x8086/0x3340; Card 0x1002/0x4e50]
(II) RADEON(0): [agp] 32768 kB allocated with handle 0x00000001
(II) RADEON(0): [agp] ring handle = 0xb0000000
(II) RADEON(0): [agp] Ring mapped at 0xb37a2000
(II) RADEON(0): [agp] ring read ptr handle = 0xb0101000
(II) RADEON(0): [agp] Ring read ptr mapped at 0xb7f7a000
(II) RADEON(0): [agp] vertex/indirect buffers handle = 0xb0102000
(II) RADEON(0): [agp] Vertex/indirect buffers mapped at 0xb35a2000
(II) RADEON(0): [agp] GART texture map handle = 0xb0302000
(II) RADEON(0): [agp] GART Texture map mapped at 0xb1922000
(II) RADEON(0): [drm] register handle = 0xe0010000
(II) RADEON(0): [dri] Visual configs initialized
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xabffa800 0x1fff0000
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(==) RADEON(0): Backing store disabled
(II) RADEON(0): [DRI] installation complete
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 10
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 29884416
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0): MC_FB_LOCATION was: 0xabffa800 is: 0xabffa800
(WW) RADEON(0): MC_AGP_LOCATION was: 0xffffffc0 is: 0xb1ffb000
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xabffa800 0xabffa800
(II) RADEON(0): MC_AGP_LOCATION : 0xb1ffb000
(II) RADEON(0): Direct rendering enabled
(II) RADEON(0): XAA Render acceleration unsupported on Radeon 9500/9700 and newer. Please use EXA instead.
(II) RADEON(0): Render acceleration disabled
(II) RADEON(0): num quad-pipes is 1
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) RADEON(0): Acceleration enabled
(II) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00674c00
(II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00678e00
(II) RADEON(0): Largest offscreen area available: 1408 x 6983
(II) RADEON(0): No video input capabilities detected and no information is provided - disabling multimedia i2c
(II) Loading sub module "theatre_detect"
(II) LoadModule: "theatre_detect"
(II) Loading /usr/lib/xorg/modules/multimedia//theatre_detect_drv.so
(II) Module theatre_detect: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 4.1
(II) RADEON(0): no multimedia table present, disabling Rage Theatre.
(II) RADEON(0): Set up overlay video
(II) RADEON(0): Set up textured video
init memmap
init common
init crtc1
init pll1
restore memmap
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xabffa800 0xabffa800
(II) RADEON(0): MC_AGP_LOCATION : 0xb1ffb000
restore common
restore crtc1
restore pll1
finished PLL1
restore LVDS
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/r300_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 370 x 277
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 0.99.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(II) Synaptics touchpad driver version 0.99.1
(**) Option "Device" "/dev/input/event8"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle double triple
(--) SynPS/2 Synaptics TouchPad touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(--) SynPS/2 Synaptics TouchPad touchpad found
(II) config/hal: Adding input device Logitech USB Receiver
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 2.0.7
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(**) Logitech USB Receiver: always reports core events
(**) Logitech USB Receiver: Device: "/dev/input/event4"
(II) Logitech USB Receiver: Found keys
(II) Logitech USB Receiver: Configuring as keyboard
(II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
(**) Option "xkb_rules" "base"
(**) Logitech USB Receiver: xkb_rules: "base"
(**) Option "xkb_model" "evdev"
(**) Logitech USB Receiver: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) Logitech USB Receiver: xkb_layout: "us"
(II) config/hal: Adding input device Logitech USB Receiver
(**) Logitech USB Receiver: always reports core events
(**) Logitech USB Receiver: Device: "/dev/input/event3"
(II) Logitech USB Receiver: Found x and y relative axes
(II) Logitech USB Receiver: Found mouse buttons
(II) Logitech USB Receiver: Configuring as mouse
(II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE)
(II) config/hal: Adding input device C-Media USB Headphone Set
(**) C-Media USB Headphone Set: always reports core events
(**) C-Media USB Headphone Set: Device: "/dev/input/event2"
(II) C-Media USB Headphone Set: Found keys
(II) C-Media USB Headphone Set: Configuring as keyboard
(II) XINPUT: Adding extended input device "C-Media USB Headphone Set" (type: KEYBOARD)
(**) Option "xkb_rules" "base"
(**) C-Media USB Headphone Set: xkb_rules: "base"
(**) Option "xkb_model" "evdev"
(**) C-Media USB Headphone Set: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) C-Media USB Headphone Set: xkb_layout: "us"
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "base"
(**) AT Translated Set 2 keyboard: xkb_rules: "base"
(**) Option "xkb_model" "evdev"
(**) AT Translated Set 2 keyboard: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) AT Translated Set 2 keyboard: xkb_layout: "us"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Found mouse buttons
(II) Macintosh mouse button emulation: Configuring as mouse
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
in RADEONProbeOutputModes
(II) RADEON(0): Added native panel mode: 1400x1050
(II) RADEON(0): Adding Screen mode: 1280x1024
(II) RADEON(0): Adding Screen mode: 1024x768
(II) RADEON(0): Total number of valid Screen mode(s) added: 2
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
sorry for this huge post - but i think that's all needed.... so does anybody have a clue?
thanks and bye
smax

Thanks Bob for that very fast reply!
But neither "Modifying hal configuration" nor "Using the Desktop Environment settings" (xfce) worked. So I tried the "I don't want this crap, how do I turn it off?" solution and well it works
Maybe I turn it back on in a month or so.. but for now i'm fine with no hot plugging but a working keyboard...
Thanks and Bye!
smax
Last edited by smaxer (2008-12-09 17:42:43)

Flickr doesn't work in this version - How can I Downgrade to a version that flikr works?

Many of the buttons on the Site Flickr don't work in this version - How do is Downgrade Firefox to an earlier version so I can use flickr. -
The buttons work fine with the same account on other browsers. They worked fine in the earlier version. I trashed Firefox and reinstalled it - I installed Firefox 4.0 beta - both had no effect.
The buttons that don't work are the "action" buttons - the "share" button - the left and right arrow buttons on either side of the row of 5 preview pictures.
I am running Firefox on a mac powerbook G4 - lots of memory,

hello, although it is meant mainly for enterprise use, for the moment you could still use the firefox 17esr release which will receive security updates for another one or two months: https://www.mozilla.org/en-US/firefox/organizations/all.html (scroll down into the second part of the page)
just as a general pointer: i wouldn't trust a bank very much when it forces you to use outdated and vulnerable browser for such a sensible task like online-banking...

CN41, CNS41 don't work on planning version 001 and project version

Similar Messages

Maybe you are looking for