CN41 report display in Object Currency

Hi,
I have a requirment to display CN41 in Object currency i.e. company code currency. CN41 will display in Controlling area currency. Please advise if nay one has coem across this issue.
Thanks & Regards,
Ranjan

Hi
Drill down to cost overview of CN41 on top menu (Go to > Structure Overview > Cost Overview). Once you are into that overview, click on 2nd symbol from left (Currency translation or Ctrl + shift + f4). Here you can change the currency as per the Co code currency.
But it will need manual intervention to translate to reqd currency and may be you can save as variant also
Thanks
Sarang

Similar Messages

  • GR55 reports display in different currency

    Hi SPL gurus,
    Hope you can help me with this GR55 question.
    My customer needs to apply different (constant) exchange rate type while running the GR55 reports for all the company codes to ensure constant reporting across without taking account the flux in the exchange rates. I have therefore setup a constant exchange rate types, ratios and exchange rates in customizing.
    When I then run GR55 some reports show the figures in the new rate and some seem to ignore the rate (currencies/company codes are the same). My question is - does anybody know if there is a second setting for the currency rate type on the Report Painter/Writer itself? If so can maybe somebody point me to it?
    Any other suggestions why some reports do work and some don't?
    Many thanks,
    Annika

    Hi Gaurav,
    Thanks for the answer. It is not user specific problem.
    I think I already found an answer myself - some of my reports are in corporate currency and some in local.
    Anything in Global currency does not for some reason convert, only the reports on local currency do apply the different exchange rates correctly.
    I think I will need to redesign all the Global currency reports. Do you agree?
    Thanks again,
    Annika

  • Display Report in Object currency

    Hi all,
    Report created by report painter, object currency(EUR), but report shows the values in controlling area currency(SEK).How can the values be seen in object currency in the report?
    Thank you.

    If it is a cost element report, then you can set the object currency as default in RPP0. If it is heirarchy reports, then you can use Settings>Currency inside the report, but you have to mention the currency here.

  • Cost Center Report in Object Currency

    Hi there,
    Any idea if it is possible to display the SAP standard Cost Center Reports in object currency instead of controlling area currency.
    Thank you.

    Hi there,
    Thanks for the reply. What about the SAP Standard report, i.e., S_ALR_87013611 - Cost Centers: Actual/Plan/Variance ?
    How can we have the object currency displayed?
    Pls advise.
    Thank you.

  • Report in Object currency

    Hi,
    Report is generated by using report painter, but report displays  the values in controlling area currency.How we can display values in object currency ?
    Regards,
    Rohit

    Hi,
    We have alredy referred to existing threds but the client requirement is sligtly different. The object currency should be displayed in report. Presently the report displyed in controlling area currency.
    Let me explain in detail, in report we have different co area currency, transaction currency & object currency. Now the report displayes the values in co area currency but actually at selection screen we are giving object currency. Why report displayed in co area currency?  We can chage the currency through currency translation but it is applicable for perticular project. Client requirement is report should automatically pick object currency in disply.
    Regards,
    Rohit

  • Residual order plan not calculated, in Object Currency for report 12KST1C

    Hello everybody,
    I have a question related to PS report painter Costs reports.
    I have created a form by copying the 12KST1C standard form, and I needed to create it, in order to change it and display the data (Costs, actual, commitment and so on) in <b>Object currency</b>, instead of CO Area Currency.
    The CO Area currency is USD and I need the reports in ARS (Argentinean Pesos)since the project objects (WBS elements, activities, etc) are in ARS too and I do not want to make a currency convertion to a specific date.
    So I created the Z12KST1C and change the ratios of the columns to Object Currency.
    The problem is that the Remaining order plan or Residual Order plan column, which is calculated at the runtime of the report is not showing any amount, while when I run the report in CO Area currency it shows the amount OK.
    I would like to know if that column (Residual Order plan) is only calculated in CO Area currency, or If I have to make adjustements to my form. Any ideas???
    I have read several SAP notes like 668240 (2 F) but I still do not see that amount calculated in Object currency.
    Thanks in advance
    Kind regards
    Pablo

    It really worked fine. Thanks a lot for your response to this issue.
    Kind regards
    Pablo

  • Display the document currency instead display Currency in Report

    Hi Experts,
      I am having  a query in support system, in that one characteristic called document  currency is there under Unit Dimension and this Doc currency info object  having the Display currency and Document currency as Variables. Document currency Info object is in Free characteristics without related  variables (Disp.curr and Doc.curr)
    When I execute the query  defaultly Display currency will appear as a  variable in selection screen, because customer exit(cmod) has created like that
    Now user want to display the document currency instead Display currency  in the report, may I know how can I solve this problem?
    Here I am unable to get the customer exit  detatils and which program is there in CMOD, can anyone suggest me, how I will get the details?
    And one more requirement in this CR, that is user want to display the key figure amount in the report should be displayed with the document currency amount only
    May I know, want to do any settings for this?
    Thanks to All
    Regards
    Mrudula

    Hi rajesh,
    1.customer exit value you can change in CMOD,select your project and go to components  and select EXIT_SAPLRRS0_001.there go to  include zxrsru01,and change  display variable to document currency variable.
    2. if u want to display your key figure value in document currency ,,go to that key figure info object ,,,in currency ( reference) field give document currency info object.Then map the respective amount value again in transformation.load the data, now  in report document currency will be displayed along with key figure amount.
    Thank you,
    Joseph

  • Wrong Display of Japanese Currency in ALV Report

    Dear Friends,
           I am facing a problem in Displaying a Japanese Currency in the ALV Report Output. I am mentioning the Currency Key field and the Currency field in the Report.
    For example, the amount field should be displaying as 22838 instead of 228.38 where this is correct in case of USD but not correct in case of JPY.
    Code where the i am appending the fieldcatlog:
        ls_fieldcat-fieldname = 'WAERK'.
        ls_fieldcat-datatype  = 'CUKY'.
        ls_fieldcat-outputlen = 8.
        ls_fieldcat-seltext_l  = Text-088.
        ls_fieldcat-seltext_m  = Text-088.
        ls_fieldcat-seltext_s  = Text-088.
        ls_fieldcat-reptext_ddic  = Text-088.
        APPEND ls_fieldcat TO lt_fieldcat.
        CLEAR ls_fieldcat.
        ls_fieldcat-fieldname = 'BUCK0'.
        ls_fieldcat-datatype  = 'CURR'.
        ls_fieldcat-outputlen = 16.
        ls_fieldcat-seltext_l  = Text-017.
        ls_fieldcat-seltext_m  = Text-017.
        ls_fieldcat-seltext_s  = Text-017.
        ls_fieldcat-reptext_ddic  = Text-017.
    Please do suggest if any inputs on the same.
    Thanks in Advance for you reply.
    Thanks and Regards,
    Saritha K

    Hi,
    All the Decimals related to currency fields will be stored in the table tcurx.
    You have to get the currency and respective decimals into internal table.
    Read the internal the table with key equal to currency.
    And calculate the values as below :
    loop at gt_output.
          READ TABLE gt_tcurx WITH KEY currkey = gt_output-zwaers.
          IF sy-subrc EQ 0.
            IF gt_tcurx-currdec = '0'.
              gt_output-dmbtr = gt_output-dmbtr * 100.
            ELSEIF gt_tcurx-currdec = '3'.
              gt_output-dmbtr = gt_output-dmbtr / 10.
            ENDIF.
          ENDIF.
          MODIFY gt_output.
    endloop. Then pass the gt_output to ALV FM.
    In the above code gt_output is my final internal table which i am passing to the ALV FM. And gt_tcurx is the internal table consists of all the currency and their decimals.
    Thanks,
    Sri.

  • Currency fields in Salesforce reports display as "[Record]" in Power Query

    Currency fields in Salesforce reports display as [Record] in excel when using power query.    Can include screenshots due to forum rules.

    Thanks - that helped me figure it out.
    IF you right click on the source and click edit to get into edit mode on the query, then you have the option to expand the record.  Doing this and saving does the trick.  
    Will try and post some screenshots later if others run into this.

  • Doubt , how to display ole objects in report builder

    Please tell me, how to display ole objects in report builder.
    I mean i wanted to print ole object in report, so how to do that.

    Just to clarify Lixia's response.
    In Reports 9i we have deprecated our OLE functionality. Reports created in prior versions that contain OLE objects should still run, but you will not be able to create new reports containing OLE objects.

  • Different currency  CN41 report

    Does Anybody knows how to change the CN41 report currency? This report usually shows the project costs in controlling area currency. The customer wants to see both, the controlling area currency and another chosen currency.
    Thanks
    James

    Think currency translation is not covered in case of structure overview reports.
    Also you should be using CNS41 instead of CN41.
    Regards
    Sreenivas

  • BEX 3.5 To display amount and currency field side by side in report

    Hello Gurus,
    I have requirement where in i have a HR report and as per the requirement the users want to see in the BEx 3.5 report to show the currency and amount field side by side
    example: I need to show 6 key figure(Amount) and their original currency side by side in the report as below
    2009 Bonus            Currency                 2009 incentive    Curr               2009 Salary               curr
    1,000                        GBP                          1,000                  USD                   1,000                        INR
    We have created a formula for the mentioned 3 key figures with NODIM to replace the currency. But we could not able to achieve by bringing the currency side by side
    Thanks in advance
    Venka

    Hi,
    Normally ther should be a another field should be there along with amount some currency either dco currency ,loc currency those fileds are assigend to the info object like 0currency
    we can go with structure at columns level u bring one as amount bouns(RKF may be) besides that u keep currency then another RKF and currency like that u can keep an d try to see the data at report level.
    Thanks & regards,
    sathisj

  • KE30 report display in company cod currency

    Hi,
    We have two company code:
    1. In China, currency:CNY, controlling area:A  operatiing concern:C,   Operating concern currency is :CNY
    2. In HK: currency:HKD, controlling area:B  operating concern:C
    So two company codes having different currency, two controlling area, but same operating concern.
    Now for HK company code, every COPA posting, have two lines in CE1R***, one with currency:CNY with currency type:01 operating concern currency, one with currency:HKD with company code currency.
    My question is for KE30 report, for HK company code, how to directly show in HKD? If using currency translation, the number will not show correctly.
    Thanks.

    HI,
    the report creation/definition must be made for operating concern currency (CNY) and comp. code currency, this allows to select the currency type (10 or B0) during report execution.  Zhis happens when you are executing KE31 to create a new report and cannot be changed if the report is already created.
    If your report was only created for operating concern currency you cannot display comp. code currency values.
    Best regards, Christian

  • Object Currency.

    Hi All,
    I have a cashflow report which has multiple currencies and has Actuals & Planned values. This report needs to be displayed in local currency or object currency.
    Is their a way to convert the values into object currency.
    Kind Regards
    James

    Make sure you have liked the Doc currency or local currency as required at the transformation level.
    check if you need to do the Currecy Coversion in T.code RSCUR where you define the source and target Currency and the date /ifoobject on which the currency coversion needs to be created.
    If you define a Currency conversion in RSCUR, Create a variable for the corresponding info objects and Use it in corresponding Keyfigure by going into key figure properties and the one you defined in RSCUR will be displayed under Currency Conversio and select that one.
    Thanks.

  • CN41 and S_ALR_87013531 in transaction currency

    Hi Experts,
    In our scenario, both controlling currency and transaction currency are different. My requirement is both reports CN41 and S_ALR_87013531 should display in transaction currency. My user does not want to use currency change option (translation key) inside the reports. Is there any alternate way to represent these two reports in transaction currency automatically without manual intervention.
    Regards,
    Laxminarsimha

    @ laxmi,
    In Txn CJE4, Create Z form by copying the existing form
    10KEF1A and create Z report in Txn CJE1 by coyping the existing report
    10KEF1A.
    Now change the Z form in Txn Cje5. Right side Double Click on the plan costs
    column and change the KEY FIGURE to transcation currecny. Change the
    Key figure accordinly to all columns.
    Hope this helps you.
    Regards,

Maybe you are looking for