CN41N and S_ALR_87013533 report not showing Production order planned cost

Hi Experts,
I am having issue to get total planned production order values in my CN41N or S_ALR_87013533 cost report. I am facing 2 issues :
1. CN41N repoet does not show individual material cost planned in BOM.
2. CN41N report and S_ALR87013533 report does not show total value but only picking fixed value.
Example :
1. CN41N report :
Above screenshot shows no values in Project plan cost & Order cost column but it shows total cost as a lumpsum on top for project. I need to know how can i get material cost populated here for Project Valuated stock material?
2. S_ALR_87013533
This report shows Total Cost of BOM as 1 line under Material Procurement activity similar to CN41N report. Also Order value is picking from Fixed cost from planned order and total cost is added on top. How can i get Total cost picked from production order?
Is there any Setting in PS config which allow me to pick the detail production order plan cost in both report under planned cost.
Thanks in advance.
Ashish

Hi Ashish,
I doubt whether Item level reporting in S_ALR... (hierarchy report) is possible or not because I haven't seen item level cost in them only the lump-sum cost because they are summarized at cost object level itself. Navigation path are there which we use to go into details of cost.
Please check the following links:
https://scn.sap.com/thread/1743833
(In the above thread,focus on Mr. Mohamed Rafi comment.)
http://scn.sap.com/thread/3530080
http://scn.sap.com/thread/1311820
Order cost plan in report CN41N
Display of plan cost.,&nbsp;CN41N&nbsp;|&nbsp;ABAP,&nbsp;SAP,&nbsp;benX AG,&nbsp;benXBrain,&…
Just an additional pointer ,have a look on your costing variant and variation variant settings for material section.
Regards
Saurabh

Similar Messages

Material cost in production order plan cost

Dear all,
-we are in sales order cost object with non-valuated stock...
-we have created two production orders from MRP run. First one is for semi finished material and second one is for finished material.
Issue-1
Both production orders not showing material cost in production order plan cost...
Issue-2
When i consumed raw material against semi-finished material production order (261-E), system not gnerated any document and material cost not updated either in production order or sales order...
where should i do changes in configuration to get updated material cost in the production order...
Best regards
Kishore

Hi
Issue 1 : Check Whether Standard cost is present for header material of prod order, and under control tab of order costing variant for plan is present.
Issue 2 : Use 261 instead 261E.
Rajneesh

BI Publisher 11g 11.1.1.6.0 and OIM Reports Not Showing Up

After upgrading to OIM BP04, I following the readme to install BI Publishing, but used the 11.1.1.6.0 version.
After creating: C:\Oracle\Middleware\Oracle_BIP\user_projects\domains\bifoundation_domain\config\bipublisher\repository\Reports\Oracle Identity Manager
I copied C:\Oracle\Middleware\Oracle_BIP\user_projects\domains\bifoundation_domain\config\bipublisher\repository\Reports\Oracle Identity Manager\OIM_11gR1_BIP11gReports.zip and uncompressed it here..
Then I restarted everything except for the database.
When I logon to the BIP console, go to Catalog then Shared Folders, there is no 'Oracle Identity Manager' folder...only the original Components and Sample folders.
What's up with that?

The answer is to open up the weblogic security schema for BIP and add a user account with the same name used to access OIM, then add the BI_Authors role. Save. Restart BIP. This got me the Resource Reports.
The DB Roles and Privs reports still don't work OOTB because the jobs don't update the UD_DB_ORA_P and _R tables. Still working on how to get that down. What's that...you know how...please do tell. Thanks :)

In which table production order planned cost and actual cost i can see?

Dear PP Guru,s,
from which table i can see productuion order planned and actaul cost. i checked following tables AUFK, AFVC, AFVV, CAUFV, AFRU, AFKO, AFPO. but i did not found planned cost and actual cost field. is there any other way to get this data with respect production order?
Regards,
sree

Dear,
Planned and actual costs of prod order from COEP, COSS, COSP S027 tables
production order shows the planned cost based on the quantity structure.
Please refer my reply in this thread for details,
Re: Actual Halb Material Cost
Regards,
R.Brahmankar

Production order -plan cost

Dear all
MY scanerio is MTO . A is a header material and B is a component .both material is having individual indicator 1 in material master.
sale order----mrp run ---plan order generated.
when i have converted plan order to production order ,bom has been copied but costing relevency indicator has not copied in component overview screen in production order . but that indicator is available in bom at component level.(material B)
but whey i have been removed individual indicator from material master of material B and assigned 2 (collective indicator) .In that case costing relevancy is copied in production order at component lavel (material B)
PLzz guide me what setting is required for copy the costing relevency indicator in component lavel in production order

Surendra,
I think your Sales order stock is non-valuated, that is the reason you are not getting cost relevancy Indicator active for the Component. Meaning that when you recieve the component against the sales order, that time itself the cost of the component gets transferred to the Sales order and in Production order you are just Issuing Quantity and it will not have values.
You can check in the Production Order header - Goods Reciept tab, that the "GR Non- Valuated" check box would be active.
So if you want the component cost to be transferred to the production order and then the sales order, then you can use "Collective Indicator -2" in the material master of the component. This means you are not purchasing against the sales order, rather consumping from avaialble inventory.
Regards,
Prasobh

Production order Planned cost

Hi gurus,
may i know how planned cost in production oder is being generated and in table COSS or COSP, what are the criterions that the system will considered before it determines which period will the planned cost be posted to?
Thanks in advance.
Regards
Yiming

Planned cost for a production/planned order is determined based on the cost of the raw materials and on the activity cost.
In material master we will define the cost of the material.In BOM we will define how much qty of components/rawmaterial is required for making the header material.Based on thisraw material cost for making an item will be calculated
In routing we will define how much power,labour etc required for making an item.In KP26 we can maintain cost on a monthly basis.Based on this cost system will calculate the activity cost.
I think now it is clear

MTO Production order planned cost

Hello
We have a MTO production order.Need to know plan cost of order.But unable to get in COEP or other csoting tables.Any other table where we can get the data.
Thaks in advance.

Hi,
Check COSP table it is for planned cost.
Regards,
Sreekanth

In production order the cost analysis report is not displaying correct

Hi,
when i create production order and do some posting activities i could not see the GR cost row details in the cost trend report in the production order.
i could see the goods issue, confirmations and overhead rows segments in it. but i could not see the goods receipt tab in the <b>cost trend report .</b> where the implication lies can u suggest.
regards
madan

Hi,
In t.code oplr (order type dependent parameters) check in the controlling tab if you have given the costing variant as PPP2 for the Actual cost calculation & PPP1 for the planned cost for your order type.
Regards,
SDs

HT1551 I ordered a rental movie on my computer and want to watch it on my 1st generation apple TV and it is not showing up there...any suggestions?

I ordered a rental movie on my computer and want to watch it on my 1st generation apple TV and it is not showing up there...any suggestions?

I had same problem last night with a movie rental not showing up under the 'Rented' tab in iTunes/Movies on my iMac: as I had no other rentals, there was no 'Rented' tab at all.
In iTunes 11, the Downloads icon only appears next to the Search bar while there is an active download. Once any downloads are finished, the icon disappears. I had no icon so I had to assume the downloading had finished (in the previous UI you could check download progress even after they had finished).
My movie rental did, however, show up under 'Rented Movies' under the 'Movies' tab in iTunes/Devices/(select any i/device) so I knew it was somewhere in my iTunes. Yet, we couldn't access it via Apple TV.
I fiddle around for a bit, restarting iTunes, restarting the iMac, to no avail. Then I did a little housekeeping and moved a different movie I'd imported awhile ago, from the 'Home Videos' tab under iTunes/Movies. Under File/Get Info, the 'Media Kind' was incorrectly set to 'Home Video' so I changed it to 'Movie'. Thus the file was moved over into the Movies tab. Hey Presto! The Rented tab suddenly showed up, and there was my rented movie!
This is the second time a movie rental did not show up after downloading. Unfortunately my husband initiated the download so we figured he must've messed up somehow as he's not as familiar with iTunes as me. Hence we opted to download the movie under a different iTunes account, which worked the second time with no problem. Needless to say the invoice for the original download had no problem in finding us, hence we were effectively being charged twice for the same movie! We have to contact apple support (such a hassle) but hopefully they will understand the issue (that's the difficult bit) and they are usually good at refunding when they finally accept the customer is genuine in their claim.
In case anyone is tempted to critique my method, we download rentals through iTune on our computer as we had too many problems trying to rent via Apple TV. Often the movie was not available to watch for many hours after it was rented, even though we'd start 'download' halfway through the day and sit down at night to watch it! We have also had problems with movies that kept stopping during viewing because it wasn't streaming fast enough. We'd give some time and come back to viewing, only to encounter the same. One time we gave gave up and tried again the next evening, only to find the movie expired. There is meant to be 48 hours after you've started viewing to resume watching a movie. Apple's only response to this was to advise we needed a broadband internet connection to stream the movie - this was despite me already telling them we have broadband.
Anyway, I hope this helps anyone experiencing similar issues with movie downloads.

I ordered at around 12:30AM pacific and it does not show in my order history. When I look it up on the order status page, it just says "received and processing". Do I have any chance of getting it on friday?

I ordered at around 12:30AM pacific and it does not show in my order history. When I look it up on the order status page, it just says "received and processing". Do I have any chance of getting it on friday?

It seems to depend on a variety of different things.
Verizon appears to be going by the process time of orders, and not the order time of orders. Your process time will be the timestamp on your confirmation email.
It also depends on which model, GB, and color you ordered. The 6+ were in high demand and low supply.
It also depends on which warehouse (order location) your order was being processed through. Verizon reps have told me that some warehouses have more of certain phones than others, and if your order went to a warehouse that doesn't have enough of that particular phone then you are SOL and will have to back for a backdated order.
There is a possibility you will get it, but if you ordered any of the 6+ models, then it is unlikely.

Order plan cost not appearing in PS report.

Dear PS friends,
I have an issue in order plan cost updation ( budget report ).
Used the prescribed WBS in maintenance order ( additional data ), but its not appearing in planned cost of CJ31 screen.
Checked the following
a) WBS is account assignment element.
b) Network type order appended indicator in OPSV.
c) Setting in network type parameters for " determine plan
cost".
d) WBS and order - both are showing plan cost when booked separately, but not integrated.
Can anybody help me to resolve this !
Thanks in advance
-- Sri --
Edited by: Srinivasan Madaswamy on May 18, 2008 2:15 PM

Hi,
In case of the maintenance order (Order Category:30)
Please check the follwoing in Tcode OPSV:
1. type is maintained default i.e ++++ (this will consider all the order types mantioned for maintenance order.
2. Please selelct the appropriate controlling area.
3. Appended plan indicator has to be checked mark,
4. Assigned funds in the plan indicator has to be checked mark,
5. In Tcode IW32: In the additional data Tab assign the WBS Element. Save the maintenance order.
Hope its useful.
Reward point if useful. Revert abck if any other issue.
Thanks..

S_ALR_87013543 report not showing line item correctly

Hi all,
The S_ALR_87013543 report or any other cost plan report not showing the line item report correctly.
eg When the S_ALR_87013543 report executed it showing 100 as a plan value against one of cost element when we double click and go to line item report it showing only one entry of 50 which is wrong.
when i checked the COSP table for the wbse with that cost element it has two entries with value type 1 and 29. value type 29 says value from sales order and 1 as plan .
My query is why S_ALR_87013543 report not showing the correct value or shall it not pick the value from value type 29.
regards
Shiv

Hi Preeti,
Thanks for the updates but one more issue. In one case COSP has a one entry for value type=1 with Busniess transaction SDOR but it was not shown in line item report. it says " no line item were selected". inspite of entry in COSP.
Screenshot of report attached,.
when i checked the drill down report for line item it says no line item found.
Any idea what went wrong
Regards
shiv

Project Plan cost report - not showing any output.

Dear Experts,
I have created several projects and done the planning. I have used work centers and activity types for manpower cost planning. Also created some PRs against the project.
When I goto the network activities and select the line item in the menu path Edit - costs - Planned/Actual - cost planned /actual
It shows me the planned cost of the activity correctly.
But when I am running the report CJI4, it shows nothing. The report is not at all executing.
I dont understand why it's \not showing.
I have checked the control key PS01 for the cost field is enabled (tick available on the cost friled)
Can any one please help me??
Thanks and Regards,
Praveen

1) Please check that the WBS element is integrated in plan, and the plan integration is fully activated in the project.
2) Plan line items are only written in certain cases.
The following rules are valid:
1. Plan line items can be written in
a) structure-oriented cost planning CJ40 (total values, annual values),
b) cost planning on orders KO12,
c) unit costing independent of cost elements,
d) structure-oriented revenue planning CJ42 (total values, annual values)
e) structure-oriented financial budgeting CJ48 (total values, annual values, period values)
f) primary cost planning,
g) activity planning,
h) revenue element planning.
2. Plan line items are never written in
a) Unit costing on cost element level
b) Network costing
3. Line items are only written if a user status permits the business transaction 'Write plan line items' explicitly.
Exception:
For plan-integrated WBS elements and orders, line items are written in cost-element oriented planning if integrated corporate planning is activated in the fiscal-year parameters of the respective plan version, regardless of the user status.
4. Plan line items for structure-oriented planning can only be displayed in the respective planning transaction under menu option "Extras-->Line items".
Let me know if this was useful
Ritesh

ISE 1.2 - Posture Detail Assessment - enforcement audit mode report not show status for non-compliant

ISE 1.2 - Posture Detail Assessment - enforcement audit mode report not show status for non-compliant.
- For old version 1.1.4 it can be reported for non-compliant, How can I generate report for this?
Thanks
Kosin Usuwanthim

It used to be in there (id 226635 is the last one with it); should I clean it up a bit and put it back with a bit more of a disclaimer?

HT1451 Why do the song names and cd name not show up on the IPod Shuffle?

Why do the song names and cd name not show up on the Shuffle?

MysticChyk wrote:
Why do the song names and cd name not show up on the Shuffle?
Err this is no longer April 1st you know.
The iPod Shuffle has never had a 'display' on which track names can be shown. See http://www.apple.com/ipod-shuffle/ if you want an iPod which does have a display on which you can see the tracks names and even the album cover art then look instead at the bigger and more expensive iPod Nano http://www.apple.com/ipod-nano/ or iPod Touch http://www.apple.com/ipod-touch/
PS. The current iPod Shuffle even though it has no display on which it can show the track names can read them out loud to you using a voice-synthesiser this is the VoiceOver feature described on the iPod Shuffle product page I listed above.

CN41N and S_ALR_87013533 report not showing Production order planned cost

Similar Messages

Maybe you are looking for