Cnu9375try is my serial number I need help getting past the bios password
Can't remember my bios password for hp mini cnu9375try
i,
I think you have more than two posts here.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Similar Messages
-
I need help getting past the installation error "windows cannot fint TEMP file"
I need help getting past the installation error "windows cannot find TEMP file"
Seems like some who have tried two devices on the JMICRON IDE port have had trouble. Try without the hard drive and see if you get that error. If that is the case I would try a PATA to SATA converter for your hard drive and connect it to one of the Intel SATA Ports.
http://www.newegg.com/Product/Product.aspx?Item=N82E16812107112
http://www.amazon.com/ADDONICS-IDE-SERIAL-CONVERTER-ADIDESA/dp/B000090169
http://www.compusa.com/products/product_info.asp?product_code=339900#ts
http://www.xpcgear.com/ide2sata.html
http://www.ubuyitdirect.com/-p-1045.html?currency=USD
http://www.satasite.com/sata-ide-converter.htm
http://www.pcgears.com/default.aspx?oid=187150
-
i lost my ipod 5 and i cant remember my serial number i need help with my serial number
Finding serial number for a device - https://discussions.apple.com/message/18246553 - from box or backup file, not from Apple.
http://support.apple.com/kb/HT2526 - If you registered a device you can use My Support Profile to find a list of serial numbers that have been purchased or registered with your Apple ID.
My Support Profile - https://supportprofile.apple.com/MySupportProfile.do
Maybe a way to find serial number after a device is no longer in your possession - https://discussions.apple.com/message/19524469 - "The easiest way to find your serial number is this Open Itunes...click help... run diagnostics.....(tick or untick as necessary) so that you just have ticked the last two, device connectivity and device sync. run these tests. it will say no ipod/ipad found but will give results of test....scroll down to bottom of results... here you will find the serial number of your last attached devices."
iPhone: Locating the serial number, IMEI, ICCID, or MEID - http://support.apple.com/kb/HT1267 - from phone itself, a computer to which it has been backed up, or packaging. -
I have a CS3 Creativ Suite. - I have uninstalled it fram XP the corret way. Now i have installed Windows 7 and try to reinstall the creative suite. It accept the first CD an the serial number, but when i get to the second CD it stop. Any one who can help?
If you have Windows 7 Pro you can try to install CS3 in XP mode.
-
HT4061 In cannot retrive my serial number because i cannot get into the phone
In cannot retrive my serial number because i cannot get into the phone
Please eject the Sim tray and underneath u would see the Serial # as well IMEI #.
Happy New YEAR -
My old iMac and OS 10.4 will not accept the New iTunes Version 10 application and I can't get past the screen offering to download iTunes 10. This is wrong and I need help getting past this situation. Help!
Sure, you can get around it if you don't need the newest version of iTunes. I still use version 7.5 because the newer versions didn't strike me as offering anything I needed.
If you do need a version 10-something then you will have to upgrade your operating system to Leopard (fi your computer will support it) at least. If you need 10.5 for some reason then there's no getting around it, you will have to buy a new computer. -
Please help with my iPhone I bought from a pawn shop but have no contact with the previous owner so I cannot get past the icloud activation Please anyone help. it would mean a lot, I paid good money for this phone
Return it to the pawn shop and get your money back. The device is permanently locked and with the previous owner to unlock it you can never use it except as a paperweight.
-
LOST MY CD WITH THE SERIAL NUMBER , I NEED HELP TO REINSTALL SOFTWARE
I HAVE AN USB 2.0 TV TUNER VOX , I HAVE LOST MY CD AND MY NOTEBOOK .
I ALREADY DOWNLOADED THE SOFTWARES : MSI PVS AND WIND DVD CREATOR PLUS , BUT I NEED THE SERIAL
NUMBERS .
THEY WERE ON THE SURFACE OF MY LOST CD.
CAN ANYBODY HELP ME ???
I NEED THESE SERIAL NUMBERS..
THANKS A LOT......look in the TV@nywhere Master FAQ up top, there is a link in there with the serial number for MSIPVS...
and please don't type in CAPS as it is considered SHOUTING and is not polite -
Need help getting around the following error: JBO-27101: Attempt to access dead entity in EO.
Hi everyone,
My logic in prepareForDML() updates some attributes (shown in the snippet below) based on whether an insert or update is taking place. But, when I delete a line, I get the following error: JBO-27101: Attempt to access dead entity in EO. So far, I have not been able to catch this error.
if (operation == DML_INSERT) {
setLineId((new SequenceImpl("eo_s",
getDBTransaction()).getSequenceNumber()));
setCreatedBy(createdBy);
setCreationDate(currentDateAndTime);
setLastUpdatedBy(lastUpdatedBy);
setLastUpdateDate(currentDateAndTime);
} else if (operation == DML_UPDATE) {
setLastUpdatedBy(lastUpdatedBy);
setLastUpdateDate(currentDateAndTime);
Any advice would be appreciated. Thanks!
JamesHi Timo,
Thanks for responding. Whenever I delete a line and commit, I get the error. And, since inserts and updates are all that I am interested in, I did not think that I needed deletion logic. The VO contains several EOs, but all are reference EOs that cannot be updated except for the main EO.
Here is the entire prepareForDML() method:
protected void prepareForDML(int operation, TransactionEvent e) {
// BEGIN Initial Version
// Using prepareForDML is a best practice (versus doDML).
ApplicationModule am;
boolean lineIsValid;
byte entityState;
byte postState;
Date currentDateAndTime;
Date weekEndingDate;
Number createdBy;
Number lastUpdatedBy;
String amConfiguration;
String amDefinition;
String entityStateText;
String operationText;
String postStateText;
ServicesAMImpl servicesAMImpl;
Timestamp timeStamp;
// amDefinition = "com.model.services.ServicesAM";
// amConfiguration = "ServicesAMLocal";
// am = Configuration.createRootApplicationModule(amDefinition, amConfiguration);
createdBy = new Number(-1); // TODO fnd_profile.value('USERNAME')
entityState = getEntityState();
entityStateText = null;
operationText = null;
postState = getPostState();
postStateText = null;
lastUpdatedBy =
new Number(-1); // TODO fnd_profile.value('USERNAME'); is there a last login id?
// servicesAMImpl = (ServicesAMImpl)am;
// lineIsValid = servicesAMImpl.callValidateLineProcedure(getBillable());
timeStamp = new Timestamp(System.currentTimeMillis());
currentDateAndTime = new Date(timeStamp);
// TODO Should weekEndingDate be in the callValidateLineProcedure()?
weekEndingDate =
commonCode.nextDay(getActivityDate(), Calendar.THURSDAY);
setWeekEndingDate(weekEndingDate);
// TODO See https://community.oracle.com/message/9542286?tstart=14.
// if (entityState != Entity.STATUS_DELETED & entityState != Entity.STATUS_DEAD)...
System.err.println("prepareForDML - getLineId: " + getLineId());
switch (operation) {
case DML_DELETE:
operationText = "Delete";
break;
case DML_INSERT:
operationText = "Insert";
break;
case DML_UPDATE:
operationText = "Update";
break;
System.err.println("prepareForDML - operationText: " +
operationText); // TODO
// System.out.println("prepareForDML - operationText: " + operationText); // TODO
switch (entityState) {
case Entity.STATUS_INITIALIZED:
entityStateText = "Initialized";
break;
// Don't do anything.
case Entity.STATUS_UNMODIFIED:
entityStateText = "Un-Modified";
break;
// Don't do anything.
case Entity.STATUS_DEAD:
entityStateText = "Dead";
break;
// Don't do anything.
case Entity.STATUS_DELETED:
entityStateText = "Deleted";
break;
// entity.revert();
// entity.refresh(Entity.REFRESH_CONTAINEES);
case Entity.STATUS_MODIFIED:
entityStateText = "Modified";
break;
// entity.refresh(Entity.REFRESH_UNDO_CHANGES);
case Entity.STATUS_NEW:
entityStateText = "New";
break;
// entity.refresh(Entity.REFRESH_FORGET_NEW_ROWS);
// entity.refresh(Entity.REFRESH_REMOVE_NEW_ROWS);
default:
entityStateText = String.valueOf(entityState);
System.err.println("prepareForDML - entityStateText: " +
entityStateText);
switch (postState) {
case Entity.STATUS_INITIALIZED:
postStateText = "Initialized";
break;
// Don't do anything.
case Entity.STATUS_UNMODIFIED:
postStateText = "Un-Modified";
break;
// Don't do anything.
case Entity.STATUS_DEAD:
postStateText = "Dead";
break;
// Don't do anything.
case Entity.STATUS_DELETED:
postStateText = "Deleted";
break;
// entity.revert();
// entity.refresh(Entity.REFRESH_CONTAINEES);
case Entity.STATUS_MODIFIED:
postStateText = "Modified";
break;
// entity.refresh(Entity.REFRESH_UNDO_CHANGES);
case Entity.STATUS_NEW:
postStateText = "New";
break;
// entity.refresh(Entity.REFRESH_FORGET_NEW_ROWS);
// entity.refresh(Entity.REFRESH_REMOVE_NEW_ROWS);
default:
postStateText = String.valueOf(postState);
System.err.println("prepareForDML - postStateText: " + postStateText);
// DeadEntityAccessException
if (operation == DML_INSERT) {
setLineId((new SequenceImpl("eo_s",
getDBTransaction()).getSequenceNumber()));
setCreatedBy(createdBy);
setCreationDate(currentDateAndTime);
setLastUpdatedBy(lastUpdatedBy);
setLastUpdateDate(currentDateAndTime);
} else if (operation == DML_UPDATE) {
setLastUpdatedBy(lastUpdatedBy);
setLastUpdateDate(currentDateAndTime);
// Configuration.releaseRootApplicationModule(am, true);
// END Initial Version
super.prepareForDML(operation, e);
Here is the entire doDML() method:
protected void doDML(int operation, TransactionEvent e) {
// BEGIN Initial Version
// This logic is for troubleshooting only.
String operationText;
operationText = null;
switch (operation) {
case DML_DELETE:
operationText = "Delete";
break;
case DML_INSERT:
operationText = "Insert";
break;
case DML_UPDATE:
operationText = "Update";
break;
System.err.println("doDML - operationText: " + operationText); // TODO
// System.out.println("doDML - operationText: " + operationText); // TODO
// END Initial Version
super.doDML(operation, e);
James -
I have a hp p6112p that was stuck by lightning. I had to replace the motherboard to get the power supply to turn on. The computer then goes to the Bios start up screen and when you hit F10 it say entering the configuration but never does just stay on the same screen. I replaced the CPU. Same problem. I had my hard drives tested and both are ok. I was told by the company that I purchased the MB from that my memory most likely wasnt compadible. I have tried super talent, g.skill, & acer and no memory worked. I called the company I got the MB again and he said it isnt a defective MB because I and getting to the start up of the Bios screen. He still says its the memory and that Its not like I am a computer store were I have 20 different brands I can try until I find one thats compadible. Can somebody PLEASE HELP ME???? I really am at witts end! Thanks
rebelthepitrebelthepit wrote: I have a hp p6112p that was stuck by lightning. I had to replace the motherboard to get the power supply to turn on. The computer then goes to the Bios start up screen and when you hit F10 it say entering the configuration but never does just stay on the same screen. I replaced the CPU. Same problem. I had my hard drives tested and both are ok. I was told by the company that I purchased the MB from that my memory most likely wasnt compadible. I have tried super talent, g.skill, & acer and no memory worked. I called the company I got the MB again and he said it isnt a defective MB because I and getting to the start up of the Bios screen. He still says its the memory and that Its not like I am a computer store were I have 20 different brands I can try until I find one thats compadible. Can somebody PLEASE HELP ME???? I really am at witts end! Thanks rebelthepit
Hello reblthepit, HP systems are a bit picky about what memory will work in a HP system.
You might want to go to Crucial.com and run their memory configurator and let Crucial advise the memory that is certified compatible with your system. This takes the guessing out of trying to purchase memory that is supported for your system.
Just because the motherboard will boot the start of the bIOS does not neccessarily tell you a lot. If you had some memory issues, and no memory was recognized by the BIOS, you would be getting some beep error codes.
If the motherboard was not a genuine HP Provided motherboard, it will not work with the HP provided operating system. You would need to purchase a new operating system.
You also could not just replace the motherboard and try to start the system without a new installation of the operating system. There would just be too many driver conflicts.
Just some thoughts.
Please click the White Kudos star on the left, to say thanks.
Please mark Accept As Solution if it solves your problem. -
I need help to find the serial number for Photoshop Elements 11
Hi! I need help to find the serial number for Photoshop Elements 11 I downloaded last year on Apple Application Store.. I have been using photoshop on mac for over a year and now need the serial number to be able to use it on macbook. I looked up Adobe's website for help but found none and noone to ask for support.. Any ideas how I can get the serial number using the App Sore bill I have?
Please post Photoshop Elements related queries over at
http://forums.adobe.com/community/photoshop_elements -
I lost my Iphone and I need IMEI number, but I have only serial number. Can I get IMEI number through Iphone serial number ? if possible please help and let me know how
If you go to the computer where your sync your phone to and open itunes and then go to edit in the tool bar then preferences then device preferences then devices.. hover the mouse pointer over your device name in the back up lists that appear there and it shows the IMEI
-
I bought CS6 and got the Serial Number, but when I install, it said cannot verify this number, I need help!
Contact Adobe (You may need the chat option):
Contact Customer Care -
I am looking for direction on how to turn "OFF" find my phone. I do not have the phone or serial number.
Remove it from your account by signing in to icloud.com/find,
selecting the device, and clicking Erase. When the device has been
erased, click Remove from Account.
You do not need the serial number to do this, but you may
be able to find the serial number here:
iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number
Scroll down to the section on getting information from your computer. -
i bought illustrator 4 days ago. I didn't get a serial number but in order to access the program i need one?
Sarah,
Presuming CS6 purchased (as perpetual licence), you should ask Adobe (or the independent seller) for it.
Have you registered it?
You may try to contact Customer Care (tick I Still Need Help and hope for an agent available for a chat),
http://helpx.adobe.com/contact.html?product=illustrator&topic=downloading-installing-and-s etting-up
or Adobe Support (phone),
http://helpx.adobe.com/adobe-connect/adobe-connect-phone-numbers.html
Maybe you are looking for
-
This is my macs configuration: Model Name: Mac mini Model Identifier: Macmini3,1 Processor Name: Intel Core 2 Duo Processor Speed: 2 GHz Number Of Processors: 1 Total Number Of Cores: 2
-
Hi guys, My scenario. I have two plant A(Customs warehouse) & B(Manufacturing Plant). Generally i will be importing materials to plant B whch is a manufacturing plant. In some cases i will raise the purchase order from B plant and if need to brng th
-
I have tried deleteing the home files, creating and loging in under TEST, nothing seems to work. I need help!!!! Thank you!!
-
Hi All, as an example, through Goods Receipt Purchase Order (e.g item 'x' quantity 10 price 2 euros =20 euros). If finally I get from vendor a Purchase invoice (copy from) with item 'x' quantity 10 price 1 euros =10 euros I should expect to see that
-
Future Posting Date Not Allowed
Dear Gurus, Is there any way to restrict the future posting date while issue materials using T/Code MB11 ? I don't want to know the restriction of document date . I could not find any sweetable answer from the forum. With Best Regards Som