CNXSRV.dll missing in BO 4.0 designer.exe does not start

Hi,
I installed BO 4.0 in windows server 2008 and everything including information design tool, webi, cmc is working but the Universe design tool(designer.exe). from some of the previous post i thought it was an issue with its drivers being 64 bit which i changed to 32 bit and still have same issue. Please help its been a while now and no result.
this is the error.
The program cant start because cnxsrv.dll is missing from your computer. Try reinstalling the program to fix the problem.
I did try reinstalling it once but results were same. Universe design tool is not working and everything else is working fine.
Any help will be greatly appreciated.

I had same issue but also had another desktop where universe designer was working ok. I copied this dll and also rptdisp.dll from the working machine to,
C:\Program Files\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\wind32_x86
i don't why these dlls were copied their by installer - it maybe a corrupt download or a patch install failed.
A bit of a workaround I know...
AL

Similar Messages

TS4194 When I reboot my windows desktop i get a message that says apsdaemon.exe can not start because msvcr80.dll is missing. How do i fix this? Thank you in advance.

When I reboot my windows desktop i get a message that says apsdaemon.exe can not start because msvcr80.dll is missing. How do i fix this? Thank you in advance.

Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
http://www.apple.com/itunes/download/
(The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
If you still have the same error messages cropping up, then try the procedures from the following user tip:
Troubleshooting issues with iTunes for Windows updates

After Successfull Installation of Photoshop Element 3.0 On Mac OS 10.6.8, Photoshop Elements does not start saying that personalization information is invalid or missing

I have installed Photoshop Elements 3.0 from original disk on my MacBook Pro with Mac OS 10.6.8. The installation was successful. However, when I try to run Photoshop Elements, it does not start, with the message "Could not complete your request because of missing or invalid personalization information". I uninstalled Adobe Elements and deleted all Adobe files from both the System Library Preferences and from the User Library Preference. Then tried the installation again. The installation was successful, but the application fails to start with the same missing/invalid-personalization-information message.
Please advise

I am sorry Invalid Personalization but Photoshop Elements 3.0 requires a PowerPC processor or Rosetta installed in order to function. You can find the system requirements at System requirements | Adobe Photoshop Elements.
You may want to try following the steps listed at Mac OS X 10.6: If you need to install Rosetta to attempt to install Rosetta. That may still not resolve your licensing issue however as the application was also designed for Mac OS 10.2.8 and 10.3.

My Photoshop Elements does not start any more. It gives response "Photoshop elements cannot start or continue because of missing file(s). Please reinstall." How do I get the installing file again (I bought it via internet the first time december 2013?)

My Photoshop Elements does not start any more. It gives response "Photoshop elements cannot start or continue because of missing file(s). Please reinstall." How do I get the installing file again (I bought it from Adobe via internet the first time december 2013?)

Did you download the Basic/Free version?
I also thought the Trial period was as long as you needed!?
What is your Warranty and Return Policy?
You get to use VueScan for as long as you want before you buy it, so we recommend you test it before you buy it to make sure it meets your needs.
All sales are final and there are no refunds.
Isn't this a bit harsh? Naah I actually prefer to solve problems, and if I offer refunds, people give up too easily. If I can't solve your problem after you send a few Problem Reports (see above), I'm happy to give a refund.
http://www.hamrick.com/sup.html#q

Design standard 5.1 -illustrator does not start

Hello. I´m using an design standard 5.1 - and only my illustrator does not start a few weeks ago. what could be the problem?

Please post this question in the Illustrator forum. You’ll get far more attention there.

Corefoundation.dll is not found because the applesyncnotifier.exe will not start?

After my laptop boots up, I get an error message that says the applesyncnotifier.exe will not start because the corefoundation.dll is not found?
I did a serch and found the corefoundation.dll on the laptop but can't find the apple syncnotifier.exe.
Does anyone have a fix for this that doesn't require you to download a program that will fix your computer for a fee?

- First I would
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
- Next see if this helps
Trouble installing iTunes or QuickTime for Windows
- Last, try posting in the iTunes forum.

Itunes does not start because msvcr80.dll is missing

Having an issue since the new itunes updated to 11.1.4.62 on Windows 7x64. After the update to 11.1.4.62, Itunes can not start because mscvr80.dll is missing.
I have reinstaleed, uninstalled, reinatelled, same issue each time.
When I search for mscvr80.dll, my computer has numerous locations for this. I search on another PC win 7x64, with itunes, and the same search does not show msvcr80.dll associated at all with itunes.
Any ideas ?

turingtest2 post 01/2014: MSVCR80.dll missing, cannot install iTunes - https://discussions.apple.com/message/24618776
iTunes for Windows: Missing MSVCR80.dll - https://sites.google.com/site/appleclubfhs/support/advice-and-articles/itunes-wi ndows-missing-msvcr80-dll - install as administrator.

CS4 Design view does not render CSS correctly but browser does !?!?

I am designing a layout using primarily CSS. I want to insert a table inside one of the div's. In design view the table gets pushed way out of position but in live view and on the web, the page looks correct. Why? Am I missing something in design view?
Here is the actual page I am working on Sample Page
Here is what I see in design view Design View
This glitch is making it difficult to add content to the table.
I tried to edit the page with Contribute CS4 and the table gets pushed so far out of position that it is impossible to access it. The page looks fine when I am connected but as soon as I try to edit it does not render properly.

This question comes up almost daily, and I dont recall seeing an answer that is much different. It comes down to that it does not matter what DV shows, it is the browser view that counts. How frustrating it is to spend time and effort to correct a view in DW Design, only to find out it throws your browser view all askew. Its hard enough to make x number of different browsers all look good with however many screen resolutions, to worry about something that in the end does not matter.....
Work more in code view, let F12 be your companion.
Gary

SharePoint Designer 2013 does not load working workflows in design view

Hello,
I would like to share with you a strange thing that happens to me with Sharepoint Designer 2013.
I designed two list workflows with SPD 2013 for a Sharepoint Online platform.
Both workflows works in the engine as designed, but sometimes happens that in SPD they just don't open in the designer view, even if they do not give errors in the execution view
The error message is that Sharepoint Designer has encountered an error and needs to be restarted. (Obviously restarting does not solve).
Sometimes happens also that the workflows opens but blank, with no steps.
Since this is an online platform, I can't consult logs.
I am thinking to open a ticket with Microsoft, but I would like also to ask to the community if someone encountered this and can suggest a way to troubleshoot what happened and why.
Thanks!

Hi,
According to your description, my understanding is that the workflow cannot be opened in SharePoint Designer and sometimes it opened with no steps.
Did this issue occur with other workflows and did it occur often with the same workflow?
I recommend to uninstall SharePoint Designer, delete all the files in the three locations below:
C:\Users\<username>\AppData\Local\Microsoft\WebsiteCache
C:\Users\<username>\AppData\Roaming\Microsoft\SharePoint Designer\ProxyAssemblyCache
C:\Users\<username>\AppData\Roaming\Microsoft\Web Server Extensions\Cache
After that reboot the client and re-install SharePoint Designer 2013 with the latest updates packaged to see if the issue still occurs.
If the issue still occurs with the same workflow, it may be caused by a known issue or by manual manipulation of the XAML in
SharePoint Designer 2013 that can
corrupt the workflow, then we need to recreate the workflow.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Bug: HTML table row with id on design mode does not display properly

JDeveloper studio edition version 10.1.3.3.0.4157
Created a very simple JSP file, which has a table of 3 rows, 3 columns.
Added id attr to second row, JDeveloper does not recognize the row in Design mode. See sample code below.
<html>
<head>
<title>JDeveloper JSP Design Mode tr with ID</title>
</head>
<body>
<table cellspacing="0" cellpadding="5" border="1" width="300">
<tr><td>1</td><td>2</td><td>3</td></tr>
<tr id="row2"><td>4</td><td>5</td><td>6</td></tr>
<tr><td>7</td><td>8</td><td>9</td></tr>
</table>
</body>
</html>

Thanks for your quick response.
I will post another bug. Please check.
thanks!

InDesign does not start after installing it first time due to missing plug ins ("Zusatzmodule")

Hello,
I was using up to now InDesign CS3, but I bought the upgrade to InDesign CS 6.
After installing the new version I tried to start it, but during the start it complains about missing plugins and stops.
So, I can not run CS 6.
The missing modules are: SVG Export.apln and Dynamicdosuments.rpln.
What can I do to make CS 6 running?
Thank you,
Gunnar

Hello Mylenium,
thank you for your answer.
I have to admit, that unfortunately I dont understand the reply. I was uninstalling, running the Adobe CS cleaner tool for CS 6, reinstalling (as suggested in other entryies of the forum). No improvement.
Question A: Do I have to run the cleaner tool for all CS including CS 3? I am a bit afraid of side effects and have nothing running afterwards. Since nobody confirmed in the forum that this will help I dont dare to play around.
Question B: Coming back to your proposal, what do you mean by proper admin privileges? I am the only user on this laptop and never did something to any admin configurations.
Finally, I installed CS 6 on another laptop. This works. However, this one I dont want or can't work with for other reasons.
Gunnar

Design Standard does not appear in the options

I have downloaded the application manager from the Design Standard downloads on the website, but when it installs and runs, Design Standard is not in the applications available. Only Premium, Master and the individual applications. Where is and how do I download and install the Design Standard suite?

I'm having the same problem. What you suggest does not work. I've done it exactly like this and no download.
Design CS6 standard is not an option. And initiating from the web page: http://www.adobe.com/cfusion/tdrc/index.cfm?product=design_standard does not cause download to happen autopmatically. Please provide a real solution.
I'm on new macbook pro using safari.

DW CS5.5 Design View Does Not Show Accurate Width of Page Compared to Browsers

Hello
I use DW CS5.5 to make websites. The Design View in DW is not at all accurate as to the width of the page when compared to how the Browsers render the page. For example, when inserting a horizontal Spry Menu, the menu items will drop to a new line because it looks like there is not more space, In reality, as seen on the browser or Live View there is a lot more space for more list items. This makes it very hard to work on a page in DWCS5.5 because it looks way too narrow compared to the actual size. On the ruler, it looks like it is 960 px, but it isn't when seen at 100% on the browser window. It does not matter what setting I use for the page size. Any suggestions? Thank you in advance. Gail

indvik wrote:
...However it still seems odd to me that the difference is about 350 px.
That could be caused by a code error, generally DV won't be that far off.
Run your page through the validator at http://validator.w3.org to see if there aren't some issues in your html that could be causing the oddity in Design View.
If your code is clean and it's still off by that amount, something to check would be the use of both css and html attributes to control the sizing of tables and other elements. The program can get a little confused and start displaying things all over the place when you do that. I'm not sure if DW5.5 does this (I skipped that version) but DWCS4 certainly did, pretty inconsistently. One way to fix it, even though the code may validate, is to give all control to the css of the page rather than splitting some with the html.

Design View Does Not Work

The design view of my DW CS3 version 9 on Mac OS X does not
function. Normally I wouldn't care, but this problem prevents me
from viewing/testing the design-time style sheets that I am
required to build for end-users. I have tried remedies cited in
various posts, but none help. I have tested the problem, by using
the exact same files (pages and design-time css) on an install of
MX2004 on another machine, and they all work fine from there. But I
really don't want to use that other machine, or MX2004 for
developing the design-time stylesheets. Please advise.

Post a link to a page that doesn't display for you on OSX,
please.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"uknow-mav" <[email protected]> wrote in
message
news:g6tb9q$qi6$[email protected]..
> The design view of my DW CS3 version 9 on Mac OS X does
not function.
> Normally
> I wouldn't care, but this problem prevents me from
viewing/testing the
> design-time style sheets that I am required to build for
end-users. I have
> tried remedies cited in various posts, but none help. I
have tested the
> problem, by using the exact same files (pages and
design-time css) on an
> install of MX2004 on another machine, and they all work
fine from there.
> But I
> really don't want to use that other machine, or MX2004
for developing the
> design-time stylesheets. Please advise.
>

Dreamweaver Design view does not show parts of the page

Hello all,
I was working on a page update - page was created using a
template so
that the client can add content with Contribute - and have
discovered
that suddenly whole sections of the page are no longer
visible in Design
Mode. This caused me some panic until I viewed in code view
and found
everything still in there. Viewing in browser shows the page
there in
entirety too, and uploads just fine. But no matter what I do
- restart
the program, restart the computer - nothing changes, the page
design
does not show parts of this page. Everything is in an
editable area and
should be visible.
I have been editing the code as that was my only option, but
now I have
heard that my client cannot view those sections of the page
in her
Contribute either.
The page is here:
http://www.craft-design.ns.ca
Any help would be gratefully received.
Thanks
Ellie

> (I find it strange that it is now like this, as I
understood that th was
> depracated? So I went through and removed them all.)
<th> deprecated? Certainly not.
> There are editable regions in the page as it has been
working for the past
> year and a half. I find that after an amount of editing
by Contribute
> users, the pages do tend to fall apart.
Normal template files have two editable regions in the head
of the page -
doctitle, and head
The one you linked does not.
That's what I was talking about.
> Contribute sounds a great thing, but is a huge pain and
ends up costing me
> money fixing the messes my clients end up making, though
this should not
> be possible...
I have stopped recommending it to my clients.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Ellie" <[email protected]> wrote in message
news:[email protected]...
> Thanks Murray,
>
> I see all this.
>
> (I find it strange that it is now like this, as I
understood that th was
> depracated? So I went through and removed them all.)
>
> There are editable regions in the page as it has been
working for the past
> year and a half. I find that after an amount of editing
by Contribute
> users, the pages do tend to fall apart.
>
> I will have to remake the template and remake the page
from that.
>
> Strange thing is it was working perfectly well before.
>
> Thanks for the help, Murray.
>
> Contribute sounds a great thing, but is a huge pain and
ends up costing me
> money fixing the messes my clients end up making, though
this should not
> be possible...
>
> Ellie
>
> Murray *ACE* wrote:
>
>> You have no editable regions in the head of that
page - why is that?
>>
>> As for the display in DW, perhaps it's the 175
validation errors that the
>> W3C validator finds on the page?
>>
>>
http://validator.w3.org/check?verbose=1&uri=http://www.craft-design.ns.ca/mbg_past_shows.h tml
>>
>> Most of these are serious coding problems....
>>
>

CNXSRV.dll missing in BO 4.0 designer.exe does not start

Similar Messages

Maybe you are looking for