Co-Editing. Received an .xml from Premiere Pro editor - no media attached

Is this normal? I thought all the media would come with it. If this is not the case, how do I get a sequence with media attached to import into FCP? Thank you!

Hi ush_publicity,
Premiere Pro project file stores only media location or the reference for it not the complete media. So, if you want to move the project from one machine to another use Project Manager from File >Project Manager.
To check how it works refer the link below.
http://helpx.adobe.com/premiere-pro/using/trim-or-copy-project.html
Once you get the project then open the project and export the XML file.
Regards,
Vinay

Similar Messages

Exporting from Premiere Pro CS4 using Media Encoder gets stop error

I am trying to export my timeline from Premiere Pro CS4, using the Adobe Media Encoder CS4 to export my timeline as an MPEG2 HDTV 1080 24, and it goes for about fifteen minutes then I get the blue screen and my computer restarts, telling me the program had a stop error. Is there a way to go around this step? Another method to get the mpeg2 without losing quality? Anything I can do?
Please offer any knowledge you have before I scream at my computer again.
Thank you

as I know Adobe products are buggy no matter what hardware you have.
I am sorry, but my experience has been the absolute opposite of what you have heard, or experienced. I have used many, many Adobe programs for almost 2 decades (maybe even more than 2 decades?), and have never observed such. I do have to admit that over those many years, I have always had a "state of the art" computer, but have made plenty of $ using Adobe software. Even with my now aging workstation, things work great. Time to upgrade though.
When troubleshooting issues, they shake out like this:
1.) system
2.) Assets
3.) Project
4.) OE
5.) Bugs
This is after troubleshooting Adobe issues from almost the time that PS hit the PC, when they were only NNTP, in what, 1985?
Now, I am not saying that your issue IS hardware, but only that that is the most likely issue, given a BSOD. Also, system is the #1 cause of issues, so that is where I start.
Good luck,
Hunt

Queuing from Premiere Pro to Adobe Media Encoder no longer working? CS6

Hi there,
Just very recently adobe media encoder has stopped accepting que's from premiere. I choose export in premiere, setup the export details and hit que, adobe media encoder launches, but then it flashes once (like disappears reappears, very quickly) and then it just simply does nothing. No item appears in the que. I have tried opening the premiere sequence directly from adobe media encoder but it does nothing either. If I drag the premiere project directly onto a preset in adobe media encoder, it crashes every time. (though not sure if it would of done this previous to my problem arising)
Anyway, very frustrating as I usually work on a different project whilst media encoder is rendering something out. Now i'm stuck with huge down times as I wait till the render is finished.
Recently updated to Mac OSX 10.8.3 - I think this is when the problem began.
Just updated the CUDA driver to 5.0.45 but this has not changed anything.
Working on a Mac Pro 5,1, 2x2.4Ghz 24GB RAM, EVGA GTX 660 FTW,

Some suggestions and answer at least the 16 questions at the end of the Wiki article.

Video: Editing on new MacBook from a Pro Editor

Hey guys, in an effort to give back to the community, I made a video to review the new MacBook and show how it fits into my own editing workflow (final cut studio) and whether or not it can adequately edit RED footage. It gets pretty technical in some parts so if you're really wanting to see the MacBook put through it's paces, you'll enjoy this.
http://www.vimeo.com/1996939

Thanks for the video. Nicely done!
I hope Apple takes notice that pros like yourself use the MacBook too and bring Firewire back! I too invested in a workstation-class Apple desktop, but would rather have a smaller (and more affordable) form-factor for editing audio away from the "office." USB 2 just won't cut the mustard for serious multitrack audio projects and the USB-only MacBook is as incompatible with my Firewire audio recording gear as it is with your Red camera.
Thanks again!
JP

Exported HD video from Premiere Pro CS4 via Media encoder Freezes mid way through video

Hi,
I couldnt find this raised by anyone else so thought id start a new thread. Ive tried a couple of times to export an edited project only to find the video is all good up until roughly half way through the video at which point the video freeezes, the time keeps moving along as if its playing but no video. It looks like the encode failed at this point. I have no problems if I split up the video and export it in smaller pieces but obviously this isnt good enough
Any ideas as to the cause?
Additional info:
Im patched upto CS4.1
Source footage is AVCHD
Project goes for just over an hour
Cheers

That suggests some failure somewhere in the encoding process. It could be something in your timeline around 43 minutes, maybe a blank space (even for a single frame), a disk hiccup causing some part to go missing, other hardware problems. It could be a myriad of things going wrong. What background processes are running, what is your hardware setup, what are the temperatures during encoding, etc. Check the second part of this link: If you need help quickly...Guideline for posting an effective question

Final Cut Pro XML from Premiere Generates Blank EDL Spreadsheet from Online Widgets

Using CS6, I am trying to create a spreadsheet based off a Final Cut Pro XML generated from Premiere Pro. I upload the XML to two different widgets (one of which being http://192.168.3.232/ingest/uploadFile.php), but then the spreadsheet that generates is blank, except for titles at the top of the columns (such as "Track #", "Shot #", etc. for this EDL). I've used these widgets to create EDL spreadsheets numerous times before, using both CS6 and CC, and this is the first time they've created blank spreadsheets.
Any help you could give would be much appreciated!
Angeli

Sort of a work around I am testing:
I have a cool script to open FCPro projects in AE. Sort of a free Automatic Duck. I was going to do this:
Remove all effects and proprietary tracks in FCPro, as some cause problems with this script. Trial and error here.
Use the free script FCP2AE to export to AE (it's hard to find now)
Open the timeline in AE via the script FCP2AE
Export that from AE as PPProCC 2014 project
Open in PPCC2014
That may work, it may also work just to remove all effects and then save the XML and open in PP CC 2014. Again sometimes it does work. The simpler the FCPro project the better.
Another option
I was able to open the FCPro audio only OMF in Audition. Then I exported via XML FCPro format from Audition and this opened the audio tracks in PPCC2014. The stereo tracks were broken and placed on two mono tracks so you'll have to address that one.

Is there a way to set a default "Source Range" in AME when exporting from Premiere Pro CC?

When exporting a sequence from Premiere Pro CC, you are able to toggle between 4 drop down options within Adobe Media Encoder on what Source Range you'd like to export (Work Area, Sequence In/Out, Entire Sequence, Custom) as seen here:
Is there a way to set the default Source Range to something besides Sequence In/Out?
My reason for asking is that sometimes I export multiple sequences at once using AME's Queue. I add my custom presets to each Sequence and hit export, but SOMETIMES I may have accidentally marked an in point on my timeline and by default it's set to export only that In-to-Out part of the sequence.
I know what you may be thinking...well, just don't add any In/Out points to your sequence on the timeline or clear them first. The trouble is that I often don't see them or catch them when working quickly. In Premiere Pro CC, I use the "Lighter Brightness" Appearance setting because it's easier on my eyes after editing 10 hours a day, 6 days a week. Sure, darker looks cooler, but it kills my eyes for some reason. Anyway, PPro CC has a troublesome appearance issue in CC where it's not "optimized" for editing when you change it to a lighter appearance like it was in CS6. I've already contacted Adobe about this and another appearance issue (involving highlighted clips when in Lighter Appearance setting) and they are "actively working on fixing this appearance issue asap".
For reference, here's Premiere Pro CC in/out points in default dark appearance (notice the slightly lighter grey area):
Now here's that same in/out in "Lighter Appearance":
Not exactly optimized. Can hardly see it. Good luck spotting that little guy on a long timeline. Sadly, this affects in/out points in the Source Window as well. Really hard to see.
Conversly, CS6 looked the best (the blue REALLY stands out making things easy to see):
So my question again...is there a way to set the default "Source Range" to something else besides Sequence In/Out so that I don't end up doing what I just did and leaving for several hours while batch exporting only to come back and find that I exported only a "portion" of one of my big sequences?
Thank you!

shooternz wrote:
Here is the solution: Slow down. Give your project some love. Smell the roses.
Agreed about the roses but alas my next project always calls. Actually, I think what happens is I give each project SO much love that when it comes to exporting, I've run out of time.
shooternz wrote:
Then it would not be a default...it would be an option and you already have that option.
Semantics aside, I would love to be able to have it at least default to whatever option was last chosen. Or, perhaps I shouldn't use the word default again...I'd love it to simply remember my preferred setting. That's all.

Media Encoder not starting from Premiere Pro

I'm having issues Exporting from Premiere Pro - I'd rather queue it through Media Encoder so I can move onto the next edit, but when I select Queue and Media Encoder opens, it doesn't do anything - simply sits there with "Not Currently Encoding" as opposed to importing the data to export.
Help?
Adobe Media Encoder, 6.0.2.81
Also installed other CC products Ps, Pr, Id, Lr, Ai, etc
I have run Adobe Updater but no updates available for Me.
Mac OS X 10.7.5 (Lion)
I am using Adobe Media Encoder through a Creative Cloud Membership subscription
Project is 6 minute film shot on Sony FS700 (AVCHD) and exports from Premiere Pro
No error message, just no action from the Application
Have not seen the problem before - most of my work is vi Canon 5D MK III, so maybe it's a Sony Codec issue? Though I have exported footage from this camera before though...
Apple MacBook Pro, 17",
I am using Mercury Playback Engine GPU Acceleration in Premiere Pro
Cheers

Finally got fed up and rang Adobe (if all else fails...)
Video Support Team Member opened my Library folder (Go\Go to folder...\~/Library/) then went into \Preferences\Adobe\Adobe Media Encoder\ and changed the folder called 6.0 to 6.0old (i.e. rename it to anything else), then hit Queue in Premiere Pro and the project successfully opened in Media Encoder and was able to start encoding.
Hopefully that helps someone else suffering the same issue!
Ollie

Exporting 5.1 ac3 audio from Premiere Pro CS4

Hi there,
I wonder if anybody can help me out with exporting 5.1 ac3 audio from Premiere CS4 version 4.1.0?
I have a 3min long HD 5.1 clip that I need to cut down to 60seconds and add fade transitions to. The final clip will be used in a media player with very specific spec - the clip needs to remain HD 1080p with a frame rate of 29.97 and a maximum CBR of 38. The audio must be 5.1 aac. The format can be mpeg 2 or h.264. The overall quality loss needs to be minimal.
Up to now I have been cutting up footage that only needs to be stereo and I found the best way to to this while keeping quality was to use Prem Pro and export as mpeg 2 1080p 29.97, quality:5, bitratre: CBR 38, audio as mpeg layer 2 (as these clips were stereo only). These clips played back fine and looked great so I wanted to keep the 5.1 clip process as close to this as possible.
So far all I have been able to get from Premiere Pro is an audio codec called DVD_LPCM which the media player will not recognise. I'm a bit of a novice when it comes to 5.1 audio so I may be doing something obviously wrong...
- I have purchased the 5.1 surcode codec and its activated.
- I have started a new AVCHD (I need 1920x1080) 1080p 29.97 project with a 5.1 audio master
- The orignal file is an mpeg which I have pulled into PPro and selected Clip > Audio > Breakout to mono
- I take the 6 mono channels in the project panel and put them into thier own mono tracks in the sequence.
- the video I use is the original mpeg with the 5.1audio muted in the sequence.
- When i select each track in the project panel and go to Clip > Audio > Source channel mappings, I see that track has already been allocated a source channel. So I go to the Audio Mixer panel and adjust the 5.1 panners for each tyrack according to what the Source Channel Mapping window has told me - Audio 1 is is L, audio 2 is R, audio 3 is LS, 4 - Rs, 5- C and 6- LFE
- I cut the video and all the mono track to the 60seconds I need and export using these settings:
Video - exactly as before
Audio -
Format - Dolby Digital, Codec - SurCode, Audio Coding Mode: 3/1 (L, R, C, LFE, Ls, Rs - 5.1 Surround), LFE: on.
The clip exports with DVD_LPCM 5.1 audio. Is it to do with the AVCHD preset? Could anyone help me get aac? Any help would be appreciated.
Thanks in advance

Using AME and the SurCode Plug-in, here's how the dialog screen looks for the Audio Tab in PrPro 2.0. It should be similar in CS4:
You do have the Minnetonka SurCode DD 5.1 SS plug-in, right?
Good luck, and hope that this is helpful.
Hunt
PS - note that in the screen-cap, I have composited the dialog box, as though it fully displayed, with no need to scroll it. Depending on your display, you may need to scroll, and your scroll bars will look different from what you see here - just ignore that part of it.
Message was edited by: the_wine_snob - Added PS

Poor quality on movie after exporting it from Premiere Pro CS5.5

Hi!
As a part of my bachelor thesis in industrial engineering, I am making an animation that shows how different types of water turbines work.
The animation it self, I've created in a program called Autodesk Inventor. From Inventor I get an uncompressed video. This video is usually not possible to open directly, but when I convert this with FreeMake video converter, it works
Conversion in FreeMake:
From:
RAWVIDEO
1280 * 720
16:9
663,554 Kbps
30 fps
To:
. Avi, mpeg4
1280 * 720
16:9
3283Kbps
30fps
The video looks great now, but now when i have finished editing the film in Adobe Premiere Pro CS5.5 and exported it, the lines are very blurred and bad. I've attached a picture showing what I mean. I have tried many different settings in Premiere, but i cannot get it any better.
The picture on the left is after exporting, the image on the right is after converting it in FreeMake Video Converter.
Have tried with the flicker removal, but with poor results.
Does anyone have any tips on what I can do?

Thank you for the warm welcome
Yes, the video from autodesk is uncompressed avi. These files are impossible to import in Premiere, and i cant open them in either VLC or WMPlayer.
After a conversion with FreeMake VideoConverter they are possible to import, and they look very good in VLC.
My Sequence settings are:
Editing mode: HDV 720p
Timebase: 29.97 frames/second
Video:
Frame size: 1280*720
Pixel Aspect ratio: Square Pixels (1.0)
Fields: No fields (progressive scan)
Display format: 30fps Drop-Frame Timecode
Audio:
Sample Rate 48000Hz
Display format: Audio samples
Video Previews
Preview File format: I-Frame Only MPEG
Codec: MPEG I-frame
With: 1280
Height: 720
Maximum bit depth and Maximum render quality is checked.
I have tried with a variety of export settings, but my current ones are:
Output:
Format: Quicktime
Video Codec: H.264
1280*720, 29,97 fps, Progressive, Quality 100, 48000Hz, Stereo, H.264
Aspect: Square Pixels
Render at maximum depth
Depth: 24bit
Use maximum render quality.
One thing I find quite strange is that i have to short clips at the beginning, which both seem fine.

Premiere Pro CC 2014 keeps freezing when loading projects from Premiere Pro CC

Hi everyone,
I'm reporting this issue in case someone else would have the same problem.
I just downloaded the 2014 version of Premiere Pro CC, and when I'm loading a project from Premiere Pro CC into CC2014 I have the software freezing and being unable to even play the loaded sequences. It seems that dynamic link is having trouble linking the CC and the CC2014 version of Premiere Pro.
Until now the only solution I found was to kill the process of the software and start it again, after 8 times I got my sequence loaded alright, then sometimes it is freezing again, killing process, starting software again, and so on. Does anyone has the same problem ?
I'm running a Windows 7 Ultimate PC with 12Go RAM dedicated only to Premiere Pro.
Cheers,
Vincent

Hi Vincent,
I feel your pain, you are not alone. Here are my machine specs and my very frustrating situation, if anyone has any idea as to how I should move forward, I would really appreciate the input/advice...
iMac - 27" Late 2013
Processor 3.4 GHz Intel Core i5
Memory 12 GB 1067 MHz DDR3
Graphics NVIDIA GeForce GTX 780M 4096 MB
Software OS X 10.9.4 (13E28)
I'm having similar issues that began when I installed Premiere Pro CC 2014, and actually got worse with the latest update/release. The majority of my projects worked fine at first, but the update last week ended that quickly. I did what I know I never should do and updated Adobe CC while completing a project on a deadline. I thought some of the fixes would help me complete the project sooner. Needless to say, the deadline has passed, my client is pissed enough to not pay me or hire me again and I'm stuck with an almost-there version that I can't export correctly because of this software. This is my problem, not Adobe's, but I didn't expect such a detrimental update to halt my operation.
After doing some research, I found that some plugins could be the cause of some specific editing issues, mainly due to incorrect or inaccessible folders - who knows if its Dynamic Link, CC apps or 2014 apps. I concluded that my issue at the time was a plugin permissions issue on the Adobe "Preference" Folder, so I reset the permissions on the folder so that CC and 2014 apps would be able to access its contents without any problems. This was the wrong decision. For some reason, resetting this folders permissions also effected the main HDD, it's Kernel Text files and their respective permission. I could not boot my machine, just got the Apple and spinning wheel until I had to power down. I ended up on the phone with 3 different AppleCare reps who helped me at least be able to turn the machine back on and access my desktop/files, apps, etc. Outside of this, no one could offer anything other than "Uninstall the problematic application, reboot, reinstall, etc..." or "Backup your files and reimage the HDD." When I mentioned the recent CUDA driver update for my graphics card (NVIDIA GeForce GTX 780M 4096 MB now running CUDA Driver Version: 6.0.51), it was like they had never heard of graphics cards being used in their machines.
Resetting permissions on Adobe Preference Folder...
This is what I read would get the CC and 2014 apps communicating correctly so that they could utilize my plugins. There is a problem, I believe, in that their are TOO MANY locations where Adobe folders/components live. There are 3 "Preferences" folders that I found, and I don't know which effects what process, but the folder I changed permissions on clearly effects the operation of all of the CC & 2014 apps I had installed, as well as my HDD. Kernel Extensions and the entire system.
Based on my perceived effects of the Preference folder, I needed to uninstall everything, run the Adobe CC Cleaner Tool, download/install just the 2014 releases and see if that resolved the issue. I'm not downloading CC apps, the 2014 releases should run fine on their own. I've yet to confirm this with Adobe, as what I've read has simply said to install the new release next to the CC apps, rather than on top of, as traditional update releases work. Anyway, one by one, I reinstalled the 14 apps that I use on a regular basis on a "clean" machine with no trace of previous Adobe apps.
After reinstalling (without any plugins), I was at least able to open Premiere Pro from the Application folder and work for a few minutes before both Program and Source monitors froze and had to force quit the app. If I try to open the Project File by double clicking it in the Finder, SpeedGrade opens up instead of Premiere Pro - never seen that before. I also had to force quit to end that process and reopen in Premiere instead of SpeedGrade.
So back to Premiere, if I do have success in opening a project in the right application, Premiere freezes - if not immediately, eventually it will just stop responding. The video clips, sequence segments and UI freeze, but the audio will keep playing until I force quit. When I force quit, Premiere Pro doesn't close entirely. The UI closes, but the process still runs. I've even force quit from Finder, force quit again from the Dock, Shut Down the machine, restarted and Premiere Pro will still be open, but "Not Responding", so I force quit again and open the project. Just now, I opened PP, made minor edits to a sequence, sent it to Media Encoder, exported, but the video I tested exported without audio. I force quite PP twice just before that and it is still running now, but again, it is "not responding".
Ultimately, none of this works, nor have my attempts at resolving these many issues. One thing I know is that there is something VERY WRONG with either the latest release/update to 2014 apps, the Preference folder or the permissions that were changed.
As I mentioned previously, and what I think is a major oversight by someone at Adobe, is that for some reason the permission changes to ONE Adobe folder also effected my entire system and Macintosh HD. Some Kernel Extension files went missing, which is never good and should not happen when resetting folder permissions, so I believe my issues are far greater than the faulty Adobe CC 2014 applications, and is the cause of many of my problems right now. If I can't get things sorted soon, I'm going to reimage my HDD and start from scratch. As much as I would like to avoid this, I really have no choice if I want to get back to work and not lose clients over inexplicable technology issues.
If I find a solution, I will repost, but I think Adobe has to make some serious fixes on this release before anything is resolved entirely. I pay them monthly and rely on their software and platform to work without issue, which is foolish - I know, but I've used CC since it was introduced and it has work well enough until now.
Is there anyone at Adobe that can offer some advice??

Exporting from Premiere Pro CC 2014

Hello there,
Every time that I am willing to export my project my Premiere Pro CC 2014 stop responding all together. I tried the short cut (Commend+M) or going through the Manu bar. the result is the same, Premiere Pro CC 2014 just freezes and does not respond to anything till I force quit it and restart it allover again. I tried exporting from Premiere Pro it self, without using Media Encoder, but the problem remains the same.
I am using the new Mac Pro. I heard Adobe Premiere Pro is experiencing problems with the New Mac Pro. Is that true? Or is there other issue?
Thank you and looking forward to hear back,
Maruf

Hi Maruf,
Maruf Noyoft wrote:
Kevin,
I reset as you suggested and it took care of it.
Great!
Maruf Noyoft wrote:
So, if you don't mind explaining me the cause of the problem that I had? Or
an article about it. It is just for me for getting to know better the program and the system.
Thank you very much and appreciate your help enormously.
Since preference files get touched by the application frequently, there is always the possibility of their corruption. When this happens, you start to see what we call "unexpected behaviors" from Premiere Pro. This problem happens infrequently, but it is a good first troubleshooting step to try on your own. This is the case with most every non-linear editing application I have used over the years (Final Cut Pro, Avid, Media 100, etc.).
Thanks,
Kevin

No sound from Premiere Pro

I was reviewing a video in the source tab when i realized that I couldn't hear any of the sound from Premiere Pro.
I can see the sound db raising in the sound value bar but I cannot hear anything from Premiere Pro.
I can hear everything outside of Premiere but nothing inside of it.

A little more information:
I'm listening on my headphones when the sound didn't work.
I therefore tried to turn them off and listen over the computers and it worked over the computers speakers.
But it still doesn't work on my headphones. I can hear every other sound than the sound from Premiere on my headphones.
While I hear a song from for example Spotify while I edit in Premiere then I still can't hear anything from Premiere on my headphone(because it is on my computers speakers) but i can still hear everything from Spotify.

Big problems exporting from Premiere Pro CS3

Hey all.
Would be massively grateful if anyone here could help me out. I'm in the process of trying to export a 23 and a half minute project from Premiere Pro CS3. I've tried exporting to different formats, (Quicktime, MPEG2, etc..) but keep arriving at the same conclusion. The process will freeze midway through, and I'm greeted by the following error messages:
"premiere pro debug event
premiere pro has encountered an error
[..\..\Src\PPixHandleUtilities.cpp-114]"
When I close that, another window pops up saying;
"export error
application failed to return a video frame.
cancelling the operation."
I'm not really sure where to go from here. Previously during the process of editing this project, I would occasionally get a message telling me that premiere pro was "running low on system memory". Fearing this to be the problem I was having while exporting, I attempted to export an extremely low quality version of the project, but arrived at the same conclusion. I also wondered if there was a corrupt frame or clip somewhere that was causing the issue, so I overlayed one whole transparent clip over the whole sequence and tried to export, but again, the same result.
I now have to put all my faith in you Adobe Wizards! Please ask me any questions that might help you to arrive at what may be causing the problem, I'll answer them the best I can
Many thanks!
Andy

>13.4GB free
FAR too small !!!
The program itself uses more than that for temporary working files
Also, unless you already have a 2nd hard drive or eSata external, you are below specification
Trying to use only ONE Hard Drive for Video Editing
You are a music conductor, with a baton that you use to point to various parts of the orchestra... this is like Windows pointing to various parts of the hard drive to do Windows housekeeping or to load program segments for various functions
Now, at the same time and with the same hand... while still using the baton to conduct the orchestra... pick up a bow and play a fiddle... this would be doing something with your video file at the same time as all the other work
You as a person cannot do both at the same time with the same hand
A computer is a LITTLE better, in that it can switch from one kind of task to another very quickly... but not quickly enough for EASY video editing
You need AT LEAST two hard drives (separate drives, never a partition http://forums.adobe.com/thread/650708 for more) with Windows (or Mac OS) and software on your boot drive, and video files on a 2nd drive so the boot drive is not slowed down by trying to do everything
Partition = Crash http://forums.adobe.com/thread/957286
I find that the three drives I use work very well for me, for editing AVCHD video... some people use a 4th drive, so video INPUT files are on drive three and all OUTPUT files are on drive four... I only bought a mid-tower case instead of a full tower case (my bad... but had to fit in the space available on my office desk!) so I use the three drives that will fit
Depending on your exact hardware (motherboard brand & model AND USB2 enclosure brand & model AND external hard drive brand & model) AND the type of video file, you may... or may NOT... be able to use an external USB2 hard drive for SD (Standard Definition) video editing
Steve Grisetti in the Premiere Elements forum http://forums.adobe.com/thread/856208 and Jim Simon in the Premiere Pro forum http://forums.adobe.com/thread/856433 use USB externals for editing
A USB3 hard drive connected to a motherboard with USB3 is supposed to be fast enough for video editing (I don't have such, so don't know) but eSata DOES have a fast enough data transfer for video editing... I have not used the eSata Dock below... for reference only, YMMV and all the usual disclaimers
http://www.amazon.com/Thermaltake-BlacX-eSATA-Docking-Station/dp/B001A4HAFS/ref=cm_cmu_pg_ t

I'm having this message when I try to export my video from Premiere Pro: "Error compiling movie. Unknown error"

I'm having this message when i try to export my video from Premiere Pro:
"Error compiling movie. Unknown error" Do anybody knows what to do?

1st, I moved your message to the correct forum
2nd, More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
3rd, Error Compiling Movie... some past discussions and ideas
-http://helpx.adobe.com/premiere-pro/kb/error-compiling-movie-rendering-or.html
-http://helpx.adobe.com/premiere-elements/kb/error-error-compiling-movie-render.html
-and nested sequences http://forums.adobe.com/thread/955172
-and WMV files frame rate http://forums.adobe.com/message/4629210

Co-Editing. Received an .xml from Premiere Pro editor - no media attached

Similar Messages

Maybe you are looking for