Co-Locate Client Access and Edge Transport Role on Same Server?

Co-Locate Client Access and Edge Transport Role on Same Server?
Is it possible/supported to install the Edge Transport Server Role on the same machine that the Client Access role is installed on now that 2013 SP1 has added support back in for the Edge Transport Role?
jon

No.
Unless something has radically changed from before...
EDIT
No, nothing has changed:
"If you want to install the Exchange 2013 Mailbox or Client Access roles on a computer, see
Install Exchange 2013 Using the Setup Wizard. The Edge Transport role can't be installed on the same computer as the Mailbox or Client Access server roles."
http://technet.microsoft.com/en-us/library/dn635117(v=exchg.150).aspx
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

Similar Messages

  • How to install and configure ms exchange server 2007 both role hub and edge transport role in one network

    How to install and configure ms exchange server 2007 both role hub and edge transport role in one network 

    Hi,
    Edge role is design for perimeter networks, to keep security risks minimum.  So it’s not recommended to have edge role in internal network. Must have separate network or subnet for edge services.
    If you are playing around it in labs, then you can put edge role within same subnet as other exchange roles and no specific requirements in that case.
    Thanks.
    MachPanel - Premium Cloud Automation Solution

  • Edge Transport Role as Email Gateway

    Hi Experts,
    We are planing to deploy exchange email server (Exchange Server-2013 Multi-Role servers) in our HQ (contoso.com) and 4 Edge Transport in other 4  client development sites(client1.com, clinet2.com, client3.com and Client4.com) so that applications running
    in HQ can send emails to respective client development sites domain using edge transport. Development sites are using external email address (mail.clinet1.com and so on). There is no requirement of incoming mail on Edge in Client site because they have compete
    hosted email solution. Just our Edge transport in client will process the mail received from HQ and will forward to Client's  External email address.
    I would appreciate if you can help me to get answer for these queries.
    Do you think this conceptual design is possible? Exchange solution in HQ and Edge transport in Client site and that Edge will forward emails to External Domain using send connector for  restive client's domain? 
    What secure (Only secure) port we need to open on Edge so that It can talk to External Email servers to deliver emails? 
    If we don't want to expose our Multi-Role exchange severs in HQ to Internet , do you think Exchange server in HQ  should be capable for incoming emails using one additional EDGE or still need to expose CAS services in HQ. We need Outlook, OWA and
    Active Sync as well for HQ (contoso.com).
    What secure port we need to open in case of CAS server? 

    Hi  Lynx
    Thank you for your question.
    I think you have a CAS and mailbox in your site. In order to receive HQ’s email, you can create accept domain, you can refer to the following link:
    http://technet.microsoft.com/en-us/library/bb124423(v=exchg.150).aspx
    in your HQ, I suggest you can separate multi-role servers into two parts, you can do NLB and DAG, because NLB cannot co-existed with DAG. I also suggest you have an edge server in your HQ.
    If client site want to talk to external email, you need to register domain name in your ISP, for example mail.domain.com,autodiscovery.domain.com……
    Secure ports were opened  that is determined  the connect way of your outlook; the more details you can refer to the following link:
    http://blogs.technet.com/b/exchange/archive/2013/02/18/exchange-firewalls-and-support-oh-my.aspx
    If there are any questions, please let me know.
    Best Regard,
    Jim

  • Managing Exchange Edge Transport Role from my workstation

    Hi Guys
    I want to manage my Edge Transport Role (2010 sp3) that resides in DMZ  from my workstation that resides on internal network. 
    What ports EMC 2010 is using? so I can open them on firewall.
    How can I add edge transport server in my EMC when ports are opened?
    Thanks in Advance
    Farhad

    Hi Farhad,
    I find a topic that provides information about ports, authentication, and encryption for all data paths. Details for your reference:
    http://technet.microsoft.com/en-us/library/bb331973(v=exchg.141).aspx
    Information :
    1. On servers that have Internet Information Services (IIS) installed, Windows opens the HTTP port (port 80, TCP) and HTTPS port (port 443, TCP). Exchange 2010 Setup doesn't open these ports. Therefore, these ports don't appear in the preceding table.
    2. Make sure the Port 25 open by communication between Hub and Edge, Edge and Edge.
    Thanks

  • Error During Exchange 2013 Mailbox Transport Role Install On Server 2012

    I was installing Exchange 2013 on Server 2012.  The server is not a DC, but is a member of a domain with a 2008 R2 functional level, and I was logged in as a domain admin.  There has never been an Exchange instance on this domain.  I got past
    the prerequisite checks, and the installer showed 15 steps, so I walked away.  When I came back, I saw this:
    Step 8 of 15: Mailbox role: Transport service
    Error:
    The following error was generated when "$error.Clear();
              $maxWait = New-TimeSpan -Minutes 8
              $timeout = Get-Date;
              $timeout = $timeout.Add($maxWait);
              $currTime = Get-Date;
              $successfullySetConfigDC = $false;
              while($currTime -le $timeout)
                $setSharedCDCErrors = @();
                try
                  Set-SharedConfigDC -DomainController $RoleDomainController -ErrorVariable setSharedCDCErrors -ErrorAction SilentlyContinue;
                  $successfullySetConfigDC = ($setSharedCDCErrors.Count -eq 0);
                  if($successfullySetConfigDC)
                    break;
                  Write-ExchangeSetupLog -Info ("An error ocurred while setting shared config DC. Error: " + $setSharedCDCErrors[0]);
                catch
                  Write-ExchangeSetupLog -Info ("An exception ocurred while setting shared config DC. Exception: " + $_.Exception.Message);
                Write-ExchangeSetupLog -Info ("Waiting 30 seconds before attempting again.");
                Start-Sleep -Seconds 30;
                $currTime = Get-Date;
              if( -not $successfullySetConfigDC)
                Write-ExchangeSetupLog -Error "Unable to set shared config DC.";
            " was run: "Unable to set shared config DC.".
    The only option on the screen was exit, so I did.  I checked the start menu, and there were two new Exchange icons, but I did not click them.  I ran the installer again, and it detected an incomplete install, the only option was to click next to
    finish the install, so I clicked next.  This time, I eventually got the same error, except the screen showed "Step 8 of 15: Mailbox role: Transport service."  I did install some Exchange 2010 prerquisites on the server before Exchange Server 2013
    came out, and I can rebuild the server and try the install again if that would be best, but I thought I should post here first and try to work through this since the product is so fresh.  Any suggestions?

    I've tried three times since my last post, following
    http://msexchange2010.info/archives/2330 as closely as possible the most recent time.  I am consistently getting the same error that appears to imply I don't have write access to the domain.  I don't understand this, because I am using the
    same domain admin account I have been using all along.  Nonetheless, here is the powershell output starting with the first Exchange setup.exe step (all other steps were already performed, all available updates were installed, and the server was rebooted
    prior to this):
    Windows PowerShell
    Copyright (C) 2012 Microsoft Corporation. All rights reserved.
    PS (domain admin home)> D:
    PS D:\> .\Setup.exe /PrepareSchema /IAcceptExchangeServerLicenseTerms
    Welcome to Microsoft Exchange Server 2013 Unattended Setup
    Copying Files...
    File copy complete. Setup will now collect additional information needed for installation.
    Performing Microsoft Exchange Server Prerequisite Check
    Prerequisite Analysis COMPLETED
    Configuring Microsoft Exchange Server
    Extending Active Directory schema COMPLETED
    The Exchange Server setup operation completed successfully.
    PS D:\> .\Setup.exe /PrepareAD /OrganizationName:PRD-INC /IAcceptExchangeServerLicenseTerms
    Welcome to Microsoft Exchange Server 2013 Unattended Setup
    Copying Files...
    File copy complete. Setup will now collect additional information needed for installation.
    Performing Microsoft Exchange Server Prerequisite Check
    Prerequisite Analysis COMPLETED
    Setup will prepare the organization for Exchange 2013 by using 'Setup /PrepareAD'. No Exchange 2010 server roles have b
    een detected in this topology. After this operation, you will not be able to install any Exchange 2010 servers.
    For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.NoE14ServerWarning.
    aspx
    Configuring Microsoft Exchange Server
    Organization Preparation COMPLETED
    The Exchange Server setup operation completed successfully.
    PS D:\> .\Setup.exe /Mode:Install /Roles:ClientAccess, Mailbox, ManagementTools /t E:\Exchange /IAcceptExchangeServe
    rLicenseTerms
    Welcome to Microsoft Exchange Server 2013 Unattended Setup
    Copying Files...
    File copy complete. Setup will now collect additional information needed for installation.
    Languages
    Management tools
    Mailbox role: Transport service
    Mailbox role: Client Access service
    Mailbox role: Unified Messaging service
    Mailbox role: Mailbox service
    Client Access role: Front End Transport service
    Client Access role: Client Access Front End service
    Performing Microsoft Exchange Server Prerequisite Check
    Configuring Prerequisites COMPLETED
    Prerequisite Analysis COMPLETED
    Configuring Microsoft Exchange Server
    Preparing Setup COMPLETED
    Stopping Services COMPLETED
    Copying Exchange Files COMPLETED
    Language Files COMPLETED
    Restoring Services COMPLETED
    Language Configuration COMPLETED
    Exchange Management Tools COMPLETED
    Mailbox role: Transport service COMPLETED
    Mailbox role: Client Access service COMPLETED
    Mailbox role: Unified Messaging service COMPLETED
    Mailbox role: Mailbox service FAILED
    The following error was generated when "$error.Clear();
    if ($RoleIsDatacenter -ne $true)
    if (Test-ExchangeServersWriteAccess -DomainController $RoleDomainController -ErrorAction SilentlyContinue)
    $sysMbx = $null;
    $name = "SystemMailbox{bb558c35-97f1-4cb9-8ff7-d53741dc928c}";
    $dispName = "Microsoft Exchange";
    Write-ExchangeSetupLog -Info ("Retrieving mailboxes with Name=$name.");
    $mbxs = @(Get-Mailbox -Arbitration -Filter {name -eq $name} -IgnoreDefaultScope -ResultSize 1 );
    if ($mbxs.Length -eq 0)
    Write-ExchangeSetupLog -Info ("Retrieving mailbox databases on Server=$RoleFqdnOrName.");
    $dbs = @(Get-MailboxDatabase -Server:$RoleFqdnOrName -DomainController $RoleDomainController);
    if ($dbs.Length -ne 0)
    Write-ExchangeSetupLog -Info ("Retrieving users with Name=$name.");
    $arbUsers = @(Get-User -Filter {name -eq $name} -IgnoreDefaultScope -ResultSize 1);
    if ($arbUsers.Length -ne 0)
    Write-ExchangeSetupLog -Info ("Enabling mailbox $name.");
    $sysMbx = Enable-Mailbox -Arbitration -Identity $arbUsers[0] -DisplayName $dispName -database $dbs[0
    ].Identity;
    else
    if ($mbxs[0].DisplayName -ne $dispName )
    Write-ExchangeSetupLog -Info ("Setting DisplayName=$dispName.");
    Set-Mailbox -Arbitration -Identity $mbxs[0] -DisplayName $dispName -Force;
    $sysMbx = $mbxs[0];
    # Set the Organization Capabilities needed for this mailbox
    if ($sysMbx -ne $null)
    # We need 1 GB for uploading large OAB files to the organization mailbox
    Write-ExchangeSetupLog -Info ("Setting mailbox properties.");
    set-mailbox -Arbitration -identity $sysMbx -UMGrammar:$true -OABGen:$true -GMGen:$true -ClientExtensions
    :$true -MailRouting:$true -MaxSendSize 1GB -Force;
    else
    Write-ExchangeSetupLog -Info ("Cannot find arbitration mailbox with name=$name.");
    else
    Write-ExchangeSetupLog -Info "Skipping creating E15 System Mailbox because of insufficient permission."
    " was run: "Database is mandatory on UserMailbox.".
    The following error was generated when "$error.Clear();
    if ($RoleIsDatacenter -ne $true)
    if (Test-ExchangeServersWriteAccess -DomainController $RoleDomainController -ErrorAction SilentlyContinue)
    $sysMbx = $null;
    $name = "SystemMailbox{bb558c35-97f1-4cb9-8ff7-d53741dc928c}";
    $dispName = "Microsoft Exchange";
    Write-ExchangeSetupLog -Info ("Retrieving mailboxes with Name=$name.");
    $mbxs = @(Get-Mailbox -Arbitration -Filter {name -eq $name} -IgnoreDefaultScope -ResultSize 1 );
    if ($mbxs.Length -eq 0)
    Write-ExchangeSetupLog -Info ("Retrieving mailbox databases on Server=$RoleFqdnOrName.");
    $dbs = @(Get-MailboxDatabase -Server:$RoleFqdnOrName -DomainController $RoleDomainController);
    if ($dbs.Length -ne 0)
    Write-ExchangeSetupLog -Info ("Retrieving users with Name=$name.");
    $arbUsers = @(Get-User -Filter {name -eq $name} -IgnoreDefaultScope -ResultSize 1);
    if ($arbUsers.Length -ne 0)
    Write-ExchangeSetupLog -Info ("Enabling mailbox $name.");
    $sysMbx = Enable-Mailbox -Arbitration -Identity $arbUsers[0] -DisplayName $dispName -database $dbs[0
    ].Identity;
    else
    if ($mbxs[0].DisplayName -ne $dispName )
    Write-ExchangeSetupLog -Info ("Setting DisplayName=$dispName.");
    Set-Mailbox -Arbitration -Identity $mbxs[0] -DisplayName $dispName -Force;
    $sysMbx = $mbxs[0];
    # Set the Organization Capabilities needed for this mailbox
    if ($sysMbx -ne $null)
    # We need 1 GB for uploading large OAB files to the organization mailbox
    Write-ExchangeSetupLog -Info ("Setting mailbox properties.");
    set-mailbox -Arbitration -identity $sysMbx -UMGrammar:$true -OABGen:$true -GMGen:$true -ClientExtensions
    :$true -MailRouting:$true -MaxSendSize 1GB -Force;
    else
    Write-ExchangeSetupLog -Info ("Cannot find arbitration mailbox with name=$name.");
    else
    Write-ExchangeSetupLog -Info "Skipping creating E15 System Mailbox because of insufficient permission."
    " was run: "Database is mandatory on UserMailbox. Property Name: Database".
    The Exchange Server setup operation didn't complete. More details can be found in ExchangeSetup.log located in the
    <SystemDrive>:\ExchangeSetupLogs folder.
    PS D:\>
    I am cleaning out in ADSI and rebuilding the server for now, because the server is behaving oddly (not as oddly as it was with 6GiB, but oddly, nonetheless).  I probably won't try to install Exchange again before tomorrow.  What should I do to prevent
    encountering the above again and/or if I encounter it again?

  • Service 'MSExchangeADTopology' failed to reach status 'Running' while installing Hub transport role of exchnage server 2010 sp1 on Window Server 2008 r2

    Hi
    Getting this error while installing hub transport role of exchange server 2010 sp1 on window server 2008 R2.
    Hub Transport Role
    Failed
    Error:
    The following error was generated when "$error.Clear();
              if ($exsSid -eq $null -or $exsSid -eq "")
              $exsSid = get-ExchangeServerGroupSID -DomainController $RoleDomainController
              start-setupservice -ServiceName MSExchangeADTopology -ServiceParameters $exsSid,$RoleDomainController
            " was run: "Service 'MSExchangeADTopology' failed to reach status 'Running' on this server.".
    Service 'MSExchangeADTopology' failed to reach status 'Running' on this server.
    Click here for help...
    http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.1.218.11&e=ms.exch.err.Ex88D115&l=0&cl=cp
    Elapsed Time: 00:25:35
    Sandeep Gupta

    Hi,
    It might be a permission issue.
    1 :
    Add Manage auditing and security log Properties
    Administative Tools > Local Security Policy > Local Policies > User Rights
    Assignment > Manage auditing and security
    Add
    Exchance Servers.
    2. Check Exchange Trusted Subsystem
    1)Open Active Directory Users and Computers
    2)Under domain name (For example contoso.com),navigate to the Builtin Container,on
    the right hand side select the Administrator group,goto the properties
    3)Click members tab and add Exchange Trusted Subsystem
    4)Click ok twice
    5)Reboot the Exchange server
    6)Rerun the Exchange setup
    Best Regards!

  • How can I create a client console and work together with the Cache Server?

    How can I edit the following Cache-Server.cmd file to create a client console and work together with the Cache Server?
    The following is the cache server file: contacts-cache-server.cmd
    @echo off
    setlocal
    if (%COHERENCE_HOME%)==() (
    set COHERENCE_HOME=c:\coherence
    set CONFIG=C:\home\oracle\coherence\Contacts
    set COH_OPTS=%COH_OPTS% -server -cp %COHERENCE_HOME%\lib\coherence.jar;C:\home\oracle\
    coherence\Contacts;C:\home\oracle\coherence\Contacts\classes;
    set COH_OPTS=%COH_OPTS% -Dtangosol.coherence.cacheconfig=%CONFIG%\contacts-cache-config.xml
    java %COH_OPTS% -Xms1g -Xmx1g -Xloggc: com.tangosol.net.DefaultCacheServer %2 %3 %4 %5 %6 %7
    :exitEdited by: junez on 23-Oct-2009 09:20

    Hi
    To run the console, change DefaultCacheServer to CacheFactory
    Paul

  • Delete the existing sharepoint farm it is a development machinie and re create again in same server

    Hi
    i want to 
    delete the existing sharepoint farm it is a development machinie  and re create again in same server.
    because i am facing issues to configure user profile service, 
    the user profile syncronisation service starting and after some time its stopped.
    while i am reading http://www.harbar.net/articles/sp2010ups.aspx
    in current farm i given ip address for sql server while installing sharepoint
    you have not used a Fully Qualified Domain Name or IP Address when specifying
    the SQL Server when running the SharePoint Configuration Wizard (PSConfig). Using either is strongly discouraged,
    if i recreate the farm is it creates new databases in sql srver?
    adil

    1. Uninstall any custom / third party solutions deployed in server.
    2. from central admin, delete web applications along with DB.
    3. delete all service applications.
    4. From the program settings, un-install sharepoint.
    5. Go to SQL and delete if any DB from SP is left.
    6. Uninstall SQL, if you see any issue.
    These are high level reverse steps of the installation.
    Thanks, Ashish | Please mark a post helpful/answer if it is helpful or answer your query.

  • SQL 2000 AND SQL 2005 ON THE SAME SERVER

    Hi all ,
    I have an installation of    SAP4.7SR1 /MSSQL2000 on a windows 2003 server.
    I want to install SAP SOLUTION MANAGER 4.0 /MSSQL2005 on the same server ... it is possible that two version of SQL ( 2000 and 2005 ) coexists on the same server ? It's sufficent to install SQL into two different directory ?
    Thank's a lot.
    Antonio Voce.

    Hi,
    yes it is possible to install SQL2000 and SQL2005 on same server but there are certain special considerations that you should be aware of
    look at following blog
    http://blogs.msdn.com/sqlblog/archive/2006/09/27/co-existence-of-sql-2005-with-sql-2000.aspx
    also look http://msdn2.microsoft.com/en-us/library/ms143694.aspx
    but in case of SAP Installation i prefered that to upgarde SQL2000 to SQL2005  then install solman 4.0
    regards,
    kaushal

  • Can we run 11g RAC and 12c RAC in the same server?

    There is a requirement to run 11g RAC and 12C RAC in the same server for a year or so and then remove 11g RAC?
    Current setup:
    HP-unix 3 node RAC on 11g R2
    4CPU
    64 GB RAM
    3 TB SAN storage
    no ASM
    Upgrade setup:
    HP-unix 3 node RAC on 12C RAC
    8CPU
    128 GB RAM
    6+ TB SAN storage
    ASM
    We are asked to use the same server and upgrade Hardware to install and run 12C RAC. What are the implications of running RAC in the same server/nodes?
    Thank you for your time!

    Hi,
    The following table shows you the compatibility between various versions:
    Clusterware
    ASM
    DB
    Certified
    12.1
    12.1
    12.1
    Y
    12.1
    12.1
    11.2(a)
    Y
    12.1
    12.1
    11.1(a)
    Y
    12.1
    12.1
    10.2(a)
    Y
    11.2
    11.2(b)
    11.2
    Y
    11.2
    11.2(b)
    11.1
    Y
    11.2
    11.2(b)
    10.2
    Y
    11.1
    11.1
    11.1(c)
    Y
    11.1
    11.1
    10.2
    Y
    11.1
    11.1
    10.1
    Y
    11.1
    10.2
    11.1
    Y
    11.1
    10.2
    10.2
    Y
    11.1
    10.2
    10.1
    Y
    11.1
    10.1(d)
    11.1
    Y
    11.1
    10.1(d)
    10.2
    Y
    11.1
    10.1
    10.1
    Y
    10.2
    10.2
    10.2
    Y
    10.2
    10.2
    10.1
    Y
    10.2
    10.1(d)
    10.2
    Y
    10.2
    10.1
    10.1
    Y
    10.1
    10.1
    10.1
    Y
    (a) Pre-12.1 database instances require an ASM instance resident on the same node as the database instance. Pre-12.1 database instances cannot leverage the implicit HA of Flex ASM.
    Oracle Clusterware (CRS/GI) - ASM - Database Version Compatibility (Doc ID 337737.1)

  • Lync 2013 and SQL 2012 on the same server

    Hi,
    I'm in the process of migrating Lync 2010 to Lync 2013.  I have a clean install of Windows Server 2012 R2.  Is it possible to install Lync 2013 and SQL 2012 on the same server or does it have to be on separate servers.
    Thanks
    P

    Configure Separated SQL Server to use in an Enterprise deployment of Lync Server. Standard Edition servers use a collocated SQL Server Express version of SQL Server that is right sized for the workloads of a Standard Edition server.
    Also you can refer below link
    http://technet.microsoft.com/en-us/library/gg425848.aspx
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"

  • Exchange Server 2013 Edge Transport Role

    Dear,
             I have a question regarding Exchange Server 2013 SP1 that, I have installed Edge Transport Server Role on separate box without Domain Joined. Obviously I installed Exchange CAS and Mailbox on Same box with
    Domain Joined in Corporate LAN.. But my edge is placed on DMZ and it is ready with all configuration, Mailbox Server Synchronization is also installed with Edge. Means all required configuration are properly configured and it is verified. But I want clients
    to OWA Access from Edge only. Because I want to restrict my internal network from the internet. So kindly provide me any possible ways to access OWA from Edge only ??. I have see some another methods like "Web Application Proxy instead of TMG because
    TMG is expired"..
    Kindly provide me possible ways or URL so I will configure it..
    Thanks.
     Fuzail (FM)

    Hi,
    Is there any further question on this thread?
    Thanks,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Simon Wu
    TechNet Community Support

  • Exchange 2007 Client Access and Receive Connector options not available (EMC)

    We have a SBS2008 server with Exchange 2007
    When I open the EMC and go to Server Configuration --> Client Access, none off the options are available (greyed out). OAW, OWA, ActiveSync are working without any problems. Outlook anywhere enabled shows False,when I try to reanable it I get the following
    error message:
    Summary: 1 item(s). 0 succeeded, 1 failed.
    Elapsed time: 00:00:01
    SERVERNAME
    Failed
    Error:
    The Active Directory object for virtual directory 'IIS://SERVERNAME.domainname.local/W3SVC/3/ROOT/Rpc' on 'SERVERNAME' could not be created. This might be because the object already exists in Active Directory. Remove the object from Active Directory, then re-create
    it.
    Unexpected Error
    Warning:
    Outlook Anywhere will be enabled on your Client Access server after a configuration period of approximately fifteen minutes. To verify that Outlook Anywhere has been enabled, check the application event log on server SERVERNAME.
    Exchange Management Shell command attempted:
    enable-OutlookAnywhere -Server 'SERVERNAME' -ExternalHostname 'mail.domainname.net' -DefaultAuthenticationMethod 'Basic' -SSLOffloading $false
    Elapsed Time: 00:00:01
    Also the receive connectors are not visible from EMC, it's just blank under receive connectors, but mails are received without any problems.
    Does someone know a way to resolve this?

    That worked!
    I created a new account and placed it into the Exchange Organization Administrators role, now I'm able to see all the options normally.
    I also re-added the original account to the EOA role but I still don't see the options there. When I go to Organization Configuration I also get the following error message:
    You do not have permissions to read the security descriptors on CN=servername,CN=Server......DC=domainname, DC=local. It was running command 'get-ExchangeAdministrator'
    So it must be a permissions issue. The strange thing is that under Exchange Administrators I can see my account and it has the role Exchange Organization Administrators.

  • Client independent and dependent transport request

    Hi
    I have a list of transport requests, I need to find which is a client independent and which is client dependent request.
    I am aware that workbench req is client independent and customizing req is client dependent.
    But i think i need to look someting else also, please help
    Regards

    Very interesting!
    As we all know that customizing requests are always client dependent, the question obviously target workbench requests.
    To my knowledge tables are always cross-client, but their contents are not necessarily.
    As one can put table -contents- into a workbench request as well, this one would thus be client dependent. Same applies e.g. for forms.
    But E070* does not give any information about the transport contents.
    E071* however states the objects included, but not if those are client dependent or not.
    How are table -contents- and forms reflected in E071* ? Can I filter for those somehow?
    Thanks
    Christoph

  • How do I check set up of a client (OSX and iOS) operation with OS X Server based Software Update

    I have just updated OS X Server running on MacMini to version 3.2.1. I have the following services enabled on my private local network with Server active:
    Caching
    File Sharing
    Software Update (Advanced)
    Questions:
    How do I install/confirm Software Update at the Server, step-by-step?
    How do I confirm confirm that my clients - both OS X and iOS are presently pointing to Server for the first try at Software Update?
    Will the mobile devices, once pointed to Server when accessible (on my private network) still function to Apple's Update Server when on the road? If not is there a quick way to repoint them automatically?
    Please answer these concerns related to a private network config.
    Thanks,
    Henry

    Good morning Ajay,
    The checkbox appears on the 4th screen when you use the "New Transformation Wizard" to create a function (directly under checkbox "Function is deterministic").
    IMHO, whether the code is run in parallel or not depends on how the mapping is run; if parallel it would try to run the function in parallel as well (unless - I guess - you've altered the property of the function in the mapping which says it can only be run row-based).
    HTH.
    Regards, Patrick

Maybe you are looking for