CO Number range group error.

hi
When I am maintaining  number ranges in the production server in kank.
Some of the groups already exist there when I went to maintain number range by selecting one group
Interveal>maintain
I am getting following error.
The number range number 01 does not exist
Message no. NR019
When I am  trying to create new group by giving new name to the group with interval that group is not coming I mean I cant able to see it within the group.
I have run the program Run RKTKA04C report (via SE38 transaction).
i can see business like COIN CO Through-postings from FI, FIPA Payment scheduling, which are not assigned down side no problem for this.
I facing the problem in creating new groups.
If any body had faced same situation please help me.

Hi kareem,
Please review the note [11294,|https://css.wdf.sap.corp/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=0000011294] which has the report RSSNR0T1 included. This report will tell you what inconsistencies there are in the number ranges etc. Please be careful before updating the report by saving. If there are some corrections that you would not like to update you just need to save. Please try this in the test System first just in case.
Please also review the notes 52390,165792 which gives details of the best method of transporing number ranges. I hope it is of help in the future.
Regards,Declan

Similar Messages

  • Costing Variant not assigned to Number Range Group

    Hi,
    I have an error while doing Sales order costing. When i create Sales order and do costing for it (Ctrl+F7) it give me an error,
    "Costing variant XYZ is not assigned to a number range group"
    Where do i need to assign the costing variant to a number range group.
    Please advise.
    Thanks in Advance,
    Safi

    Hi Ramana,
    Thanks for the reply.
    I have mainted the number rnages in VN01.The issue still persists.
    Safi

  • How to transport number range group Configuration in Material Master

    Hi,
    I have this query regarding how to transport number range group in material master from one server to another.
    Problem: There was no number range assignment done for a particular material type. So, i assigned the particular mat. type to a group which had some number range intervals with the help of T-Code MMNR.
    But when i want to transport this config. to other sever, it is only transporting the interval but not the assignment done to that group. In the menu bar only Interval transport option is there.
    Can anybody help me with this I hope the query is clear.
    Regards
    Vivek

    Hi,
    Number range objects can be transported using Workbench requests.
    Thanks
    Kishore

  • CWIP, profit center  number ranges groups difference

    Hi
    Gurus, smarts,
    I have two clients 000,800
    my problem is
    Capital work in progress number ranges for company attachment groups one client i.e 000 showing. but another client 800 not showing the same groups for assignment of company code.
    why like this?
    profit center accounting number ranges groups one client showing but another client not showing same group. T.Code: GB02.
    why like that showing difference groups for each client.  where i can
    please anybody resolve the problem. last four days i am facing the same problem.
    Thank you
    Anil

    Hi
    Please refer GB02
    ~Thanks
    Rajesh

  • Delete a number range Group in internal order

    Dear experts!
    Now, I'm getting some issue about maintain number range group in internal order.
    So I defined a number range group, after that I want to delete the number range group. How do I have to do?
    Best regards, Huy

    Done the question!

  • Maintain Number range group for Internal order

    Hello,
    I have created Internal order type, now, i would like to create/maintain the number range group for this already created order type.
    When i goto Maint Number ranges for orders->click on Group->Maint and again click on group insert... when i mention here the group name and number range for that group and say save the system in accepting but when view all the groups, i do not find this new group created by me.
    How do i view the newly created group, is there any other steps to be followed? please advice.
    regards,
    radhakrishna

    Hi:
    It's a little late for this post but it is still important to record.
    When you try to create a group in KONK transaction, the system doesn't show the new group.
    This is because there are a inconsistences in the old groups.
    You must execute RSSNR0T1 program to solve the problem.
    Greetings
    Marco

  • Order number range - Group

    Hi,
    Client requirement is to maintain different number ranges for each order type.
    Whenever I try to create a Group(Menu-Group-Insert). Then Text. Then number range.
    I created new group, text,assigned number range but the new group is not coming.
    (system is not throwing any warning/error message regarding overlapping)
    Kindly share your views where i'm going wrong.
    Thanks
    Prasad

    Hi ,
    Whenever we add new group it comes at the bottom ie before Not assigned.
    But it's not coming(the new group).
    It's coming in Sandbox client but not in Testing client.
    Kindly share your views.I'm under pressure from Client....
    Pete & Thyaga...waiting for your views
    Prasad

  • Number Range & Grouping

    Dear Experts,
    I am doing rollout in CRM 2007 and for the other branches i have created and maped the nuber range for  grouping also. But when tested in WEB GUI , BP is taking the assigned number range. How to assing this number range to the purticular Sales org.
    Kindly  reply with a solutins.
    Regards,
    VJ

    Resolved.

  • Billing document( T code:VF01) number range interval error

    Hi Guru,
    While Creating Billing document i.e (VF01) I got an error. But apart from that I already maintain the Number range Interval in FBN1 as well as SNUM. But that number ranges I assigned in Billing document type also. Then also facing the same error.
    So please give me some solution Asap
    Regards,
    Sukdev.

    Dear Neel,
    Please find the Screen shot for VN01
    and please find my Sales document type Number range assignment.
    and please find my billing document type number range assignment.
    Regards,
    Sukdev.

  • CO number range program error- Urgent

    I am getting a program error while trying to maintain number ranges for CO in KANK . The program gives a dump.
    The ABAP guy gave the following reason:
    "Controlling area 1000 is the one giving dump. Actually the program is checking entries from the Internal table XINRG.
    In the client 120( golden) , this internal table has the entries for the controlling area which we are trying to maintain. But in 140( unit testing), this internal table does not have any entries in this internal table.
    In the client 140, If I select controlling area 0001 or US01, it takes me to the next screen.
    Looks like for 1000, somewhere some dependency has to be maintained. "
    I encountered the same problem long time back and I remeber running a report thru se38.
    If anyone is aware of this pls suggest as I have to begin unit testing and without this fixed I cannot proceed.
    Thanks very much.

    Can you give more details:
    Which screen where you in (the first with the selection of Area, Interval display/ chane, Status)?
    What does the dump say? XINRG does not exist in 46c or ERP6.
    Are you able to copy from another co-area?
    Cheers
    Hein

  • Number Range Object  error

    I created a number range Object in SNRO Trans, but while saving that object it is showing this error as 'Invalid call sequence for interfaces when recording changes' and further i am not able to proceed.

    Rama,
    What number range are you creating?
    This error seems to be from the transport system. It is trying to record the changes into a transport request.
    Cheers
    Aneesh

  • Assign Product category to number range group

    Hi,
    I have defined an product Category in CRM .. COMM_hierarchy.
    when i open the tcode COMCMATERIALId..
    i am not getting the new product category in the non-assigned elements to assign the category to the number range..
    thanks..
    Dinesh

    Dear Rajprabhu,
    Please follow the link.
    Re: how to transport number range
    Hope this is clear
    Thanks & Regards
    Kundan Kumar

  • Error Message on attempting to delete a Number Range in CO82--Msg No-NR019

    While deleting the Number range groups in CO82, initially I was able to delete them, but later, I was not able to do so. The error message is as below.
    "The number range number 18 does not exist
    Message no. NR019"
    What is the implication and how to solve or correct this?
    I have seen the earlier threads, but the solution is not clear.
    Thanks in advance
    Sanjay

    Closing the issue

  • Error message when maintaining number range for controlling area

    hello everybody:
    I am just creating a new controlling area in current system, it's ok for me to maintain (tcode KANK)the CO number range in Development system, but when comes to QAS, I want to maintain the number range groups (F6) manually, but not possible. A error message is throwed out by SAP saying:
    No elements exist for the object/sub-object 0060.
    Message no. NR004.
    Can anyone give me any suggestion on what reason this message comes?
    Regards.
    Andy

    Hello Andy,
    Please apply the OSS note 4958. This will help you to solve the problem with error NR004 and to define the CO number range objects.
    Kind regards,
    Carmen

  • Error in EA27 BBP for Number ranges

    Dear All,
    We are getting an error in Batch Job for EA27 for the number ranges.The error is as below :-
    Shor Text :-
    No number range determined for payment forms
    Long Text:-
    Message no. >2459
    Diagnosis
    You want to print forms that contain a payment form and number the payment forms. For payment forms, internal unique numbers are assigned automatically from predefined number ranges. In this case, no appropriate number ranges have been set up, or all number ranges set up are locked by parallel processing runs.
    System Response
    Error message and termination of processing, since the system cannot number the payment forms.
    Contact your system administrator.
    Procedure for System Administration
    Check whether number ranges are set up as follows.
    To do so, choose Maintain entries or Customizing.
    Number range Number from Number to
    00 000000000001 009999999999
    01 010000000000 019999999999
    02 020000000000 029999999999
    03 030000000000 039999999999
    04 040000000000 049999999999
    05 050000000000 059999999999
    06 060000000000 069999999999
    07 070000000000 079999999999
    08 080000000000 089999999999
    09 090000000000 099999999999
    Create the missing number ranges. If necessary, you can create more number ranges than the 10 proposed.
    I am clueless about this error , please help me to resolve  this error.
    regards,
    Sagar

    check
    PA04  check with number ranges
    ans also check PE03  NUMKR

Maybe you are looking for