CO Object required for one G/L in billing even though COPA config exists

Hi,
I am facing error where for one particular cost element CO object error is appearing (KI235). we have configured PA structure, OKB9 as well as SD condition type to COPA value field assignment for said G/L and condition type.
still system is showing this error.
Pl. suggest me..
Regards,
Sayujya

Hi,
check the billing doc. account assignment and if the object assigned is not statistical (internal order).
best regards, Christian

Similar Messages

Objects required for transport operations

Hello,
I am preparing to upgrade and migrate databases from 10g on AIX to 12c on OEL6. I found a great doc that details the use of Transportable Tablespaces for metadata movement and RMAN for the migration of the datafiles from big endian to little endian. The doc is 371556.1. The only thing that is unclear to me in that doc is bullet 2 in the Goal section. It states:
2.- Import objects required for transport operations from the source database into the destination database.
I'm not quite sure to which objects this is referring. It sounds like there are objects that are dependencies for transport operations, but again, not sure what those objects might be or what the operations are (e.g. using exp or data pump in tablespace mode?)
Or perhaps it's referring to objects that aren't typically transportable/exported in tablespace mode, such as synonyms?
With the exception of that one bullet point, the doc makes perfect sense. If anyone has any clarification on this, it would be greatly appreciated.
Thanks!
Jon

It looks like the link in my original post isn't working. The document is on MOS and is titled "How to Migrate to different Endian Platform Using Transportable Tablespaces With RMAN (Doc ID 371556.1)"

When I attempt to apply a lens profile in the Develop module the only choices are for the Fujifilm X100/S/T even though in the Library module the EXIF data correctly shows the camera as the X-T1 and the precise lens used to take the picture. How do I get

When I attempt to apply a lens profile in the Develop module the only choices are for the Fujifilm X100/S/T even though in the Library module the EXIF data correctly shows the camera as the X-T1 and the precise lens used to take the picture. How do I get the right profile available?

First, the required profile needs to be present. LR 5.4 supports the X-T1 in terms of understanding its Raw format, but will not come with a profile for every lens which can be mounted onto that.
A profile is made for each specific lens, as mounted on a certain camera. It can also be used with pictures taken on a different (reasonably similar) camera body than the one originally used during profiling. This is subject to the sensor format: you can employ a given lens profile made for full frame, on an image from a crop sensor behind the same lens - but not vice versa.
Next, the image type needs to correspond to the image type which has been built into the profile: Raw, or non-Raw.
Lightroom offers only profiles of the right type for the image(s) concerned. There are many more provided for correcting camera Raw, than for correcting camera JPG. That is also the case with additional profiles, e.g. those accessed via the Adobe lens profile downloader utility.
Finally, in the event that there simply is no profile out there for a given lens, it is not particularly difficult (though a little tedious) for the end user to generate one, using a further Adobe utility which is downloadable as a package, including a range of checkerboard calibration targets, each of which needs to be printed at a stated physical size.

Can you trade in a cracked Ipad 2 16 GB for the ipad trade in program even though it is cracked

can you trade in a cracked Ipad 2 16 GB for the ipad trade in program even though it is cracked

You can try. Go to http://www.apple.com/recycling/
When it asks for "Cosmetic condition", say "Poor".

I just bought a new Motorola modem. Do I need to reconfigure my Airport Express? For some reason we have WiFi even though the amber light is blinking.

I just bought a new Motorola modem. Do I need to reconfigure my Airport Express? For some reason we have WiFi even though the amber light is blinking.

Typically, when changing out networking hardware, it is always a good idea to perform a complete power reset of all of your networking equipment.
I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
If the above steps do not solve the problem, start over with step 1 above, but then perform the next steps between steps 1 & 2. above.
Disconnect the AirPort base station from the Internet broadband modem.
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
Continue with step 2 in the first set of steps.
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.

Auth objects required for creating super,power,end user roles

Hi ,
I need to create 3 roles according to the below requirement. can you tell me what auth objects req inorder to fulfill customer requirement.
1.     Super User:
     Have the access to Create/Modify/Delete own queries
     Can create Variables, CKF, Structures, Formulas & RKF at the cube level (global)
2.     Power User :
     Have the access to Create/Modify/Delete own queries
     Can create Structures, Formulas at the query level
3.     End User
     Have the access to run and navigate reports at the local level
Hope I will get reply soon
Thanks

Karunakar -
Few things you have to keep in mind when you are giving access to the reports and queries.
S_RS_COMP only will not do.
have you assigned S_RS_COMP1 and S_RS_MPRO for info areas and multi/info providers.
and one more auth object S_RS_ICUBE for info cubes. you have to assign what ever the info cubes that you need to give access to the users.
Then only user will get full access.
precisely in order you can say,
S_RS_COMP
S_RS_COMP1
S_RS_ICUBE
and S_RS_MPRO.
These are main auth objects which are related to info cube, info area access and BEx access.
Hope this would give you clear pic.

Customer giving requirement for one year

Customer is giving order for the materials to be supplied for one year (the quantity can change to some extent) at a particular rate. With reference to that order he is also giving monthly schedule (in which he mentions how much quantity to be delivered on which dates).
Please suggest me a solution for this scenario also tell me if rate gets changes during the year for the order given how do I go about.
regards,
Rajesh

use scheduling agreements.
the overall quantities scheluder for the year can be put into the system as indipendent requirements (PP) splitted over the months.
Then the scheduling agreement set the delivery quantities day per day (or weeks or months): using the right planning strategy (I think 011 with requirement class KSV but i'm not sure) the indipendent requirements are compensated from schedule lines requirements.
Roberto

Two deliveries required for one sales order

Hello Friends,
I have a quirey , I have two types of goods in one sales order, one is dangerous goods and other one is normal. How ever we are thinking to make two seperate deliveries even they are in one sales order. How can two diff deliveries gets created.
We are planning to create new shipping point with new loading group for the dangerous goods .
Will the above decision works or is there any simplest way to create two auto deliverys for one sales order.
Reg.

Hi all,
I have yet another proposal - using copy control and adding there dangerous goods profile LIPS-PROFL as split criterial. This field is populated originally from material master MARA-PROFL field. You can check for example routine FV50C201. Split criteria are defined in likp-zukrl field.
I think that is better solution then introducing new shipping point. Because there are some determinations and dependencies related to shipping points. So the more shipping points you have, the more additional config you have. If it is needed by business to have separate shipping points - then fine. But if the goods are shipped from the same place, then I would rather modify copy control instead of multiplying config and master data. I say duplicated effort in master data - because with 2 shippiong points you would need to maintain DG profile field and additionally loading group.
Kind regards
Witek Prawecki.

Mac 10.9.5 trying to launch Illustrator CS6 for first time and prompts Java even though I have Java 8 installed.

Mac 10.9.5 trying to launch Illustrator CS6 for first time and won't launch, prompts for Java 6 even though I have Java 8 installed!
Apple says Java 6 is very insecure and not to use it. I have the latest Java installed. Why won't Illustrator launch? What else can I do?

tm,
I believe you should be able to get round the issue by following this:
http://oliverdowling.com.au/2014/03/28/java-se-8-on-mac-os-x/
It is even more thoroughly described in this thread, see post #3 on by gator soup:
https://forums.adobe.com/thread/1706469

Authorization object required for materail and vendor.

Hi All,
I have Z report where material and vendor are there on the selection screen.I need to put authorization check on materail and vendor. Can u plz suggest which authorization object I should use for this?
thnks
MSi

On the other hand, assuming your program will run in a properly maintained SAP installation, I would always use standard authorisation objects as much as possible. Try finding a standard SAP report with similar selections and output and see how it is done there. Trace the execution via ST01 and see which objects are being checked.
Also use the repository infosystem to browse the available standard objects. Talk to a functional and/or security expert to clarify your requirement regarding necessary authorization checks.
Thomas

How to create many objects listening for one event

I'm experimenting with the EventDispatcher class and I have a
test class working. I want to use a loop to create a variety of
movie clips that all listen for an event that gets dispatched every
half a second. I have the event dispatching properly. My problem is
that when creating the objects, the temporary variable I use to
hold each created object has a life that extends beyond the loop in
which it is instantiated. Rather than all five created objects
changing color, only the last one changes color (see the code
below--it lives on the first frame of an FLA file).
This is not entirely surprising when I look at the code --
'this' refers to the global scope and 'square' refers to the last
created object that it pointed to. Here's the resulting trace:
handler runing, square name is square 4
this class name is global
handler runing, square name is square 4
this class name is global
handler runing, square name is square 4
this class name is global
handler runing, square name is square 4
this class name is global
handler runing, square name is square 4
this class name is global
How can I modify this code so that each square object changes
its own color?

graphics.clear in the context of that function handler in my
code would refer not to the squares but to the global scope,
wouldn't it? In which case you'd be clearing all the graphics from
your top level movie. I tried changing 'square.graphics' to just
'graphics' in my handler and my squares just remained the original
steady black.
Your code doesn't use a loop and therefore isn't re-using a
variable. You've escaped my 'logical errors' through brute force.
(BTW, I think my code would work in AS2 if I used the old-school
draw methods). Suppose you had to create 100 objects? Would you
want to manually instantiate each one, typing that function over
and over again? You'd have 500 lines of highly redundant code!
Maybe try your example using a loop instead? I think you'll
find it's pretty tough to sneak any vars like 'i' or 'square' from
the global scope into the handler--the handler refers to the
living, breathing variable rather than it's value at the time the
handler was instantiated. Furthermore, you can't sneak any
information about the square into your handler via the event object
because the event object is created in a totally different place.

CSS Newbie - Modules required for One-Legged topology

Hi all,
I'm looking to setup a system to load balance 12 http web application servers which talk to a backend database cluster. The servers are connected to top of rack 4948 switches which are dual homed to a pair of 6500 chassis for resilience.
Looking through the application networking pages on CSS's I think that a one-legged pair of CSS11503 switches (possibly in an Active-Active standby mode) connected one to each of the 6500's should do the trick. My question is does this sound sensible and would I need any other module in the CSS11503 other than the SCM?
Thanks in advance,
Zac

Zac,
be aware that the CSS is splitting the traffic accross all the modules [no matter where the traffic came in]. So the more modules you have, the more connections the CSS can handle.
For this purpose we sell SAM module that have no interfaces and their only purpose is to perform loadbalancing decision.
Also, regarding one-armed solution.
At first glance it is easy deploy.
However, the CSS is a stateful device, so it requires to see for a single connection all the packets from the client and all the packets from the server.
In a one-armed scenario, this is not automatic. You need to set the CSS to be the default gateway of the server, or use client nat or policy routing.
If you go for client nat, the servers will see connections from one ip address only and you won't be able to perform stats about the clients.
Gilles.

How many channels are required for one G711 Call on T1 PRI

Hi Everyone,
Just have a basic question.
Lets say i want to make one G711 call which is compressed. below will be the bandwidth required.
Calculation:
Total packet size (bytes) = (Layer 2 Ethernet header 6 bytes) + ( compressed IP/UDP/RTP header of 2 bytes) + (voice payload of 20 bytes) = 28 bytes. Total packet size (bits) = (28 bytes) * 8 bits per byte = 224 bits
PPS = (64 Kbps codec bit rate) / (160 bits) = 409 pps
Bandwidth per call = voice packet size (224 bits) * 409 pps = 90 Kbps
From what i know, 1 channel on a T1 has a bandwidth of 64kbps.
Question:
Does this call require two channels to start the conversation?
Will this call be successful?
How will one channel accommodate this call?

No, 64 kbps basically matches the payload, and the TDM T1 trunk needs no IP header overhead, so it matches, even if it did not you are trying to compare apples and oranges as when you send the call to channelized T1 circuit it's TDM based (bandwidth is irrelevant), if by T1 you meant data T1 then the circuit would not be channelized and would provide total 1.544 mbps.
Chris

How do I remove the requirement for one of my family members to ask for approval to download an app?

Approval to download app

Hi daviddrake20,
If you are talking about the Ask to Buy feature of Family Sharing, you can find the instructions for turning it on or off for any member under the age of 18 in the following article:
Request and make purchases with Ask to Buy - Apple Support
Regards,
- Brenden

How can I get past the age requirements for iTunes? I can't even create a new account for my parents.

I cannot create an iTunes account on my iPad2 because of age restrictions ("not old enough to create account"). My dad cannot add himself as a new account, because I am "not old enough to create a new account". I can't even download free apps. Now what?

Your dad can create an account for you without a credit card.
iTunes account without credit card:
http://support.apple.com/kb/HT2534

CO Object required for one G/L in billing even though COPA config exists

Similar Messages

Maybe you are looking for