CO-PA Account Base

I've search the entire SDN, there seem to be no one with real answere to this:
-After I generated the COPA Datasource (account base), on the BW side, you replicate, create infosource and eventualy create a COPA cube.
The problem is this; the cube has no keyfigure. So how do we get the keyfugure created or assing for the account base. The cost base has keyfigure but not account base.
-Is there anything I needed to do in R3 side to generate DS that carries value field(keyfigure)?
-Am I suppose to create my keyfigure in BW and if so, how will that be done (please give practical cases)?
-Is there standard KF to be activated?
Your help is respectfully acpreciated.

SAP delivers only a select set of key figure schema. So that you can map the source fields to this corresponding fields.
SBIW - application specfic DS - profitability analysis - Assign key figures.
Other than that you need to create ur own KF's and units for all the value fields.

Similar Messages

Account base , cost base

hi sap gurus
   can anybody clear me about the copa base of account base and cost base , and what are the differences for these both?
   regards
venkatareddy

There are two ways COPA captures data
. Costing based
. Account based
Both use Characteristics to store the data abt info that is updates in COPA
Characteristics (Customers,Sales office,Sales grp,Material number,Strategic business unit,Co code,Profit center,Sales employee,Cont area,Prod hierarchy etc)
Main diff in how the 2 methods store data involves qty and values
Costing based stores values and qty in Value fields
Account based stores them in cost elements (accts) used in FI and rest of CO
Value fields group together similar values and qty
<b>Costing based COPA</b>
1-Costing based COPA allows you to manage sales based on when sales docs update and when data is trans from FI and other CO modules
2- Normally the largest data trans to COPA is from SD billing docs
3-Normal doc flow
        . Sales order
         .Delivery (creates goods issue - debit COGS / credit Inventory)
        . Billing docs (updates A/R, Sales revenue, Disc, Freights etc)
4-costing based COPA, COPA is not updated until billing docs are created
<b>Account based COPA</b>
1-Allows users to reconcile COPA data to FI data
2-According to the accts posted instead of the value fields
3-Data mainly trans from billing docs again
4-Acct based COPA updated during the delivery and creation of billing docs and not
   after itlike costing based
5-Normal doc flow
         1-Sales order
         2-Delivery (COGS is updated in COPA here itself)
        3- Billing docs
plz assign point as way of thanks

Dear apple my account base been hacked and when I try to reset by email authentication I don't recieve my mail . Can anyone help me?

Dear apple ,
my account base been hacked and when I try to reset by email authentication I don't recieve my mail . Can anyone help me?

Hello deborahmp,
Depending on how you have your Apple ID set up, reset or security related emails may either be sent to your primary or your rescue email address. If you are having issues resetting your Apple ID password, you may find the steps and options outlined in the following article helpful, up to and including contacting Apple Support directly if necessary:
If you forgot your Apple ID password - Apple Support
Sincerely,
- Brenden

Decesion of Costing base COPA over Account base

Dear Gurus,
I have read the defination of costing based and account based copa and understood the conceptual part of it.
On what basis does a a particular business determines that whether they will have to go for costing or account based copa or both ? In other words what are the parameter that I have to keep in mind before I suggest any of the copa method to the business?
Thanks

Hi
Costing based COPA is always preferred over Acct Based COPA (ABC), for the following reasons
Costing based vs. Account based copa (ABC)
a. Account based copa uses transaction tables and hence affects performance of CO transactions
b. Estimated values not possible in ABC (Stat Values)
c. Reports based on line items not possible in ABC
d. Actual Top Down distribution not available in ABC
e. Revaluation of actual data to plan data is not available in ABC
f. No key figure schemes are available in ABC
g. COGS breakup cant be achieved in ABC
Explanation on (b) - Using stat values, you can take tax values also to COPA.. i.e. you create a Stat cond type with 100% condition record on Sale Tax Cond Type... Hence, you can take tax values to COPA
If you use ABC, you cant use Stat Values.. And tax account being a balance sheet account cant be taken to COPA
Regards
Ajay M

Can you set a default "Reply-To:" on a per account basis?

I have two accounts set up in Apple Mail. One is a work account, and the other is my personal iCloud account.
For my personal emails, I would prefer to have any replies directed to an "email-for-life" address. My college alumni association has a service, which is essentially an email forwarder. The beauty of this is that I am not tied to a particular ISP such as iCloud, mobileme, .mac, etc. If I change ISPs, I only have to update the infomation on the forwarding system rather that letting all my personal contacts know that my email address has changed. For them, my permanent email address is of the form "<firstname.lastname>@<college>.alumni.edu". As such, I cannot use that address as my "From" address, as mosts ISP requirethe From address for authentication. I suppose this helps prevent spoofing.
I have seen instructions for setting a Default "Reply-To:" address in Apple Mail by setting the UserHeaders in Mail prefs via a Terminal window:
To set: Enter the following in a terminal window:
defaults write com.apple.mail UserHeaders '{"Reply-To:"="[email protected]";}'
To review settings: Enter the following in a terminal window:
defaults read com.apple.mail UserHeaders
To clear settings: Enter the following in a terminal window:
defaults delete com.apple.mail UserHeaders
My problem is that this sets the default for all email accounts in Apple Mail. I only want to do this for my personal email account. I want emails sent from my work account to reply to the work email addresss.
Is there a setting on the defaults write ... command such that I can apply the UserHeaders to only one account?
Regards,
Tim

What you could do is first rename the record to be imported
IMPORT SOURCE_TBL AS PS_SOURCE_TBL_ORG;
Then write a insert/select script from PS_SOURCE_TBL_ORG to PS_SOURCE_TBL defaulting column EXCHANGE_RATE_OPTN
Insert into PS_SOURCE_TBL (COLUMN,COLUMN,COLUMN,COLUMN, EXCHANGE_RATE_OPTN)
select PS_SOURCE_TBL_ORG (COLUMN,COLUMN,COLUMN,COLUMN, 'defaultvalue');
And then drop table PS_SOURCE_TBL_ORG to clean up your database.

My Account bas been hacked this morning

Please help me out, how can i get back my skype account, I have recieved this email today...
Registered email successfully changed
Registered email address successfully changed. We've updated your registered email address to [*****]. Visit your account to review your changes at any time.
If you have not changed your email address, please contact Skype Customer Service with any questions as someone may have fraudulently gained access to your account.
Talk soon,
The people at Skype
E-mail addresses are redacted from posts.

you can visit the link below for suggestions regarding hacked/compromised accounts;
http://community.skype.com/t5/Security-Privacy-Trust-and/Suggestions-on-how-to-handle-Hacked-Skype-A...
IF YOU FOUND OUR POST USEFUL THEN PLEASE GIVE "KUDOS". IF IT HELPED TO FIX YOUR ISSUE PLEASE MARK IT AS A "SOLUTION" TO HELP OTHERS. THANKS!
ALTERNATIVE SKYPE DOWNLOAD LINKS | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUSPICIOS CALLS AND MESSAGES
SEE MORE TIPS, TRICKS, TUTORIALS AND UPDATES in
| skypefordummies.blogspot.com |

Block and Unblock the .zip and .rar files based on doamin or user account base on incoming mails with ironport email security.

Hi All,
Request you all to help me out in blocking/dropping only the attachments with the extension .rar and .zip in incoming mails for particular users or domains.
as of now I have did for all the domains or users.However, I want to unblock it only for some particular/specific users and for rest it should block.
kindly help me with the steps to do the configuration.
Thanks a ton in advance
Regards,
LRN

It sounds like you just need to use different incoming mail policies per group of individuals you want to block/drop .rar and .zip and those which you don't want this to happen.
The fact that you want a specific group to be allowed receipt of these and everyone else should have these blocked I would recommend creating an additional incoming mail policy that does NOT have a content filter that performs this blocking. Add the appropriate users to this incoming mail policy. Then create a incoming content filter that does this dropping of .rar and .zip files and apply this to the Default Incoming Mail Policy.
The content filter in this situation would not need a condition, just a action of strip attachments by file info , filename contains .rar or .zip
Here is a useful regex for the content filter action: (?i)\.(zip|rar)
Hope this helps!
Steve

Reg. Stock account purchase with sale order

Dear Friends
We want to purchase Row,semifinished and Accessories material with stock account against sale order (E). If we purchase without any account assignment mean the material goes to stock account base on their material type whereas If we use E the material account goes to consumption account,how to divert the account from going consumption to Stock account. Pls help me.
Thanks
Rajakumar.K

HI,
First I want to Let you know that it is standard setting that when ever you procure with Blank account assignment category ,it Goes to the Stock account that is defined in the T code OBYC--
in the trsaction key BSX.
But know you are saying that you are using a account assignment category E.
Which says cleary that it has to a Sales order comsuption account.
KNow the question is wheter the you are able to See the Stock in MB52 under Special stock indicator E
or after GRN it is going to the consumption directly.
it happens completly depending on the acount assignment category setting
SPRO--> MM --> Purchaing (OLME) > Account Assignment> Define Acc asign.
in this for the account Assignment E check ..the below
Consumption Posting -- ? ,if it E ..then it is for sales Order.
Account Modificaition--? it would having some Key..
this KEy is the one against which GL the consumption should GO..(here you can change your GL if required)
it is maintained in OBYC-- Trasac - GBB> and in that gainst the key eg --VKA ..the GL is maintained .
and the other thing is Special stock indicatoe -- ? -- if it is E ..then it is allocated to Stock.
Hope so i am clear .on what to be done
Regards
Anjanna

Two IPod Family: How do we separate our accounts?

I have had my IPod Nano for a year now. My son just bought himself one yesterday and we loaded the program unto the computer. Two Itune Icons appeared and each of the two downloaded my songs which are not his taste. So I deleted my songs from the second newly generated Itunes Icon which is suppose to be his and when I went back to my old Itunes Icon I found all my songs had been deleted from my Itunes.
What's the deal? We're using the same computer, we each have our own IPods, we have different tastes. I don't want to listen his music and he does not want to listen to mine. I do not want to give up my music (I kept my songs in the library) and he wants to add his. This is not working out. My husband and our other son wanted to buy IPods too, but now that we have seen what has happened they are reconsidering their plans. We each have our own music preferences.
Now that my son and I are conjoined at the IPods, how can you separate us without damage to our IPods? Has anyone thought about a multiple IPod household with different tastes and a posibility that each may want to listen to their own choice of music. Is there any help for us?

Use the instructions in this article to transfer different songs to each iPod. The iTunes library is stored on a per-account basis by default; all copies of iTunes will have the same iTunes library when run from the same account.
(15593)

Liquidity planner customer / vendor / gl account based query

Hi gurus ;
My client want to see cash flows at customer , vendor and gl account base. Are there any way to classify query results for customer , vendor and gl accounts.
Thanks ;
Koray

Hi,
As a standard solution, you need to define Planning Group in such a way which will give direct difference to Vendor/Customer records. As a result the CM settings can also be configured seperately for different Planning Groups.
Liquidity Planner will show the balance in drill down layout with different Planning Group also.
Regards
prasad

Can Apple Mail filter spam per account?

Sorry if this is to the wrong forum - I didn't see one for Apple Mail.
I have two mail accounts setup in Apple Mail: one for work (an MS Exchange server) and one for home (a gmail account via IMAP). When I originally setup Mail, junk filtering was on, but I vaguely recall the junk filtering interfering with the filtering Google's own junk mechanism (which, by the way, is amazingly effective!), so I turned off Mail's junk filtering. But lately, I've been getting more junk mail on my work account and would like to do junk filtering there. But it appears that "Junk" filtering can only be turned on globally - not on an account basis. Or is there a way?
Thanks for all info/suggestion.

There's really no way for the Mail's Junk filter to interfere with Google's. Google's filter acts before Mail even sees the message. I would just turn it on. If Google's filter is good, Mail will rarely see any spam that Google didn't already deal with.
But if you really want to exclude an account, choose Perform custom actions in the Junk Mail pane of Mail preferences. Then in the Advanced dialog, set criteria to restrict the filter according to Account.

IOS 5: I want to manage app permissions for multiple Twitter accounts

I have two Twitter accounts, one personal and one for work. I want to use different apps to manage them to avoid accidental cross posting. However since I upgraded to iOS 5, any account I use in one app seems to then be added to all other apps too.
I have found the settings panel to allow different apps access to your Twitter credentials or not, but this only work for all Twitter accounts or none. I want to be able to use the phone-wide Twitter integration with my personal account, but I want to lock down my work account to only publish using one specific app. I have tried deleting my work account from the settings panel, and signing into my work account with a third party app, but even though Tweetbot has a button to 'Add account to iOS', apparently it automatically shares it anyway without me giving permission to do so.
This has already caused problems with third party apps using my Twitter log in and not asking which account I wanted to publish to (so it chose both) and I am not happy that apps which I have not explicitly given permission to are able to do this with my second account. Permissions should be able to be granted on an account basis. If you know of a way to do this, or a third party Twitter app which doesn't share your details with the rest of iOS, I would be very grateful, thanks.

I have both this and a slightly different question. I have multiple Twitter accounts on both my iOS5 and iOS6 (test) devices. i like to post tweets from various apps like the Wall Street Journal, etc. In my case, the built-in functionality simply seems to pick the first of my Twitter accounts in my list of accounts in the Settings panel, and post to that one. It would seem to make sense that there should be a user-selectable option for which account(s) should process a tweet, and it probably ought to be system-wide. No?

Keep mail local on per folder basis

I have multiple email accounts in Mail. One of them is an Exchange account and one of the folders that is shared with me is one called "Public Folders". This folder has sub-folders that I need and sub-folders that I do not need. The sub-folders that I do not need are taking up too much disk space.
In preferences it gives me the option (per account) to download All message and their attachments or not to download message, etc.
Question: Is there a way that I can have that option to download messages or not be on a per folder basis instead of on a per account basis?

No, and you cannot unsubscribe to any mailboxes either. It’s either all or nothing, but setting Keep copies of messages for offline viewing to Only messages I’ve read should be close to what you want, except the junk filter won’t work in that case...

Help needed - setting password policies for different types of accounts

Hello,
We have a situation where we have different types of users created on a solaris server. We have regular users, admins, functional accounts and device accounts. Of course solaris does not differentiate between regular user and other types, i think. The default password policy applies to all the users on the server. I want to configure different policy for different types of user accounts. Is it possible? The difference between the accounts on our side is
Regular user accounts - 8 digit numbers ( 00667265) - expire password every 90 days
Functional accounts - 8 digits starting with F ( F0253466) - do not expire, but password length must be 10-12 and complex
Device Accounts - 8 digits starting with Z ( Z2367249) - do not expire, but password length must be 12 and complex - like upper case, lower case, number, special chars etc.
Is it possible to set up different password policies, is so how?

The password expiration policy is pretty easy, it can be set on a per account basis when the account is created. I'm not aware of a simple way to define a complexity policy for groups of accounts but the policy is enforced using pam, so you should be able to write a pam module which would enforce your complexity policy. The pam manual page would be a reasonable starting point for learning about pam.

Help for scripting Multipliying inflation per Account Value

Hello Experts,
I am developing a script logic in BPC 10 to get the accounts month value multipied by the month inflation. Here is my script:
// In this part I am setting my scope:
*XDIM_MEMBERSET AUDITTRAIL= IC
*XDIM_MEMBERSET ENTITY = US
*XDIM_MEMBERSET INTERCO = I_US
*XDIM_MEMBERSET PRODUCT = ProductA
*XDIM_MEMBERSET RPTCURRENCY = USD
*XDIM_MEMBERSET MEASURES = PERIODIC
// In this section I am searching the inflation of January, 1st. QUESTION, how do i do this value dynamic so I can return the value of each month?
*LOOKUP Rates
*DIM Val: CATEGORY="Actual"
*DIM Val: INPUTCURRENCY="AED"
*DIM Val: R_ACCOUNT= "AVG"
*DIM Val: TIME= "2014.01"
*DIM Val: MEASURES= "PERIODIC"
*DIM Val: R_ENTITY="Global"
*ENDLOOKUP
// In this section I am multipliying the result of the lookup (inflation) with the Accoutn value. But i see not results, It only work when I set a specific account, but when I set BAS oif the accoutn PL100 it doesen WORK. 2nd question How do i make this to work?
*When ACCOUNT
*IS BAS(PL100)
*REC(FACTOR=(1+LOOKUP(Val)), CATEGORY="Actual")
*ENDWHEN
Any idea how can I solve the issues of this script logic?
Thank you in advance for your answers.
Best Regards.

Hi Sebastian,
First I don't see TIME scope of this script.
"In this section I am searching the inflation of January, 1st. QUESTION, how do i do this value dynamic so I can return the value of each month" - simply remove this line:
*DIM Val: TIME= "2014.01"
then LOOKUP will use TIME from the current record in WHEN/ENDWHEN
Second, instead of *IS BAS(PL100)
Use scope for ACCOUNT:
*XDIM_MEMBERSET ACCOUNT=BAS(PL100)
and *IS *
Vadim

CO-PA Account Base

Similar Messages

Maybe you are looking for