CO-PA- Actual Values are not flowing in the CO-PA

Hi ,
   I have created an operating concern and created the characteristics and value fields as per our requirement. I have assigned a particular cost element to a value field through FI direct posting .
I have mapped SD Condition types to my value fields
I have also activated the Operating Concern
Now when i am tryinng to post the document from FI no CO-PA document is getting generated nor the actuals are getting transferred to the CO-PA.
And when i am trying to post a document from FI to Profitability Segment (through account assignment) iam getting following dump.
The current ABAP program "SAPLKEET" had to be terminated because one of the
statements could not be executed.
                                                                                This is probably due to an error in the ABAP program.
                                                                                In program "RK2FGPKE ", the following syntax error occurred
in the Include "RK2FGTKE " in line 23:
"The Dictionary structure or table "T25A2" is either not active or does"
" not exist."
But I have already created a segment as my characteristics and i have created a segment for my operating concern and I have checked that this is getting stored in table T2509.
I have checked with the table T25A2 it is not activated .
Can anyone suggest am i going wrong in the customisation part.
how do i solve it plz assist me as early as possible.
Regards
Sunil

hi sunil
as per ur mail this problem is occured in table space . kaindly consult ur BASIS onsultant first. based on that ask the ABAP ER . some times it will happen if any oracle applicastion not works

Similar Messages

Service order/confitimation - plannedvalues/actual values or not flowing

Hi All,
When I am creating a Service contract in SAP CRM an internal order is created with planned values but when I am creating a service order/service confirmations and assigning it to a contract t the planned values/actual values are not flowing on to the internal order
Can you please let me if any specific configuration is missed or required for the above scenario?
Thanks
SK

closed

Depot Sales-Excise values are not flowing from J1iJ to VF01

Hi Gurus,
In Depot Sales: while doing excise invoive from T-code J1iJ Go to delivery -RG23D selection select the delivery number XXXXX Excise Group 51 and series Group: 50 ENTER - select the line item and click on F6 and here we have to click on excise invoice Button for capturing the Input excise duties for taking the reference. And the excise values are shown here correctly.
Issue: In VF01- when we are raising the commercial invoice , the duty values are not flowing from the J1IJ transaction. Instead the values are showing Zero for all the three condition types namely JEXP, JECS and JHCS. We have used the Pricing Procedure ZINDEP and 356 routine.
Inputs on this how to solve will be highly appreciated.. as we are in critical stage.
What are the checks to be ensured to Get the values flow from J1IJ to VF01.
Scenario: STO from Mfrg Plant to Depot and Depot sales to customer.
Me21N-Me29N-VL10B-VL02N-VF01-J1IIn-MIGO-(STO process completes)-VA01-VL01N-J1IJ-VF01(duty values should flow from the J1IJ referenced Excise Invoice) Correct me if I am wrong.
Any user exits, Notes please let me know. I could not find any. I have gone through the forum threads, which speaks about 356 routine, J1ID- checks etc.
Thanks&Regards
Sreekanth:

Hi!
Am sure you would have captured the Excise at Depot with J1IG.
Also, have you saved the billing document to check the duties?
Thirdly, after save, again open the billing doc and go to Header-Conditions then Save. This part does not seems logical, but i am sharing my practical experience.
Please check condition records if any.
Regards
Arun

Excise Values are not flowing from J1IJ to VF01

Hi All,
I am facing the problem in Invoice to Customer(from Depot). Excise Values are not flowing from J1IJ. I maintained Alt Cal type as 356 in Pricing procedure for Excise condition types. Even though its not flowing. I am using Tax Procedure TAXINN.
I have gone through SDN, everybody is suggesting about 356 routine.
My scenario is STO from Plant to Depot and Sale from Depot to Customer.
ME21N->VL10B->VF01(Proforma)->J1IIN->MIGO->VA01(from Depot)->VL01N->J1IJ(Depot Excise)->VF01(Invoice to Customer)
In J1IJ, excise values are coming but in VF01 it is not coming.
Kindly help me.
With Regards
Azeez.Mohd

Hi,
in j1ig initial screen which excise group/series group i need to enter
is it of supplying plant or depot --- Enter Your Excise group
If i enter material document no say 5000000265 (corresponds to migo-101 at depot )& year
it'm getting error message excise invoice already exists for5000000265 --> Check the Year of material document
You can also use the Excise Invoice Details tab
Enter Vendor's Ex.Inv.No. , enter your STO's Excise Invoice No. and Click on Own factory and enter factory's Series Group in n case of STO from factory,
use Depot Excise Invoice in case of transfer from another depot
and Excise Inv. Date
On next screen,
In case of non availability of Internal Excise No., select the line item and click on button. On next screen, enter Excise Inv. No., Date, Challan Qty, Excise Base value, ensure that Excise Duty rates are maintained in respective duty rates column, you can also manually enter the excise duty amount and press Enter . System will give warning messages, press Enter for each message and press Back button. System will display the excise duty amount, check the same and click on Save button.
Hope this will resolve your issue.
Regards,
Krishna O

Revenue values are not flowing into COPA

Dear Experts,
We are processing the MTS normal scenario. Here the revenue values are not flowing into COPA when FG sale. But when we process the Raw material Sale values are flowing to COPA smoothly. Here the SD condition Type, Revenue Account and COPA value Field same for RM and FG.
May I know the exact reasonu2026.
Please suggest me in right wayu2026.
Regards,
Balaji Bhonsle.

Hi Balaji bhau
I guess the issue might be with your Item Category in SD.. Is it set relevant for billing??
See if the Billing Type has been entered in KE4W and the VF reset for it
Check in VFX3 if the invoice is lying there for any error.... Try to release the Billing to accounting and you may get the error message
br, Ajay M

Custom field values are not storing in the data base

Hi Friends,
We have created one Custom field called ZZ_APPROVER in Rfx Header , we have included this field in the below stuctures
1.INCL_EEW_PD_HEADER_CSF_BID
2.INCL_EEW_PD_HEADER_CSF
The data type of this field ( ZZ_APPROVER ) is CHAR and the length is 1 . we have given 2 fixed values in Value Range
1 -
X+2 Approver
2 --- Provisional Approver
so when we select either 1 or 2 ( in Drop Down ), its displaying properly on RFx Screen, but when we try save this document the values are not strong in the data base.
Can any one give me idea why its not stroring in the data base
Thanks in Advance
Kumar Srini

Hi Ganapathy,
A Record is created in table BBP_PDHSC , for other z fields, the values are stroing , but for this field ( ZZ_APPROVER ) [ drop down list ], the value is not stroring
Thnx
Kumar Srini

Excise values are not flowing in MIGO

Dear All,
I am facing a problem during MIGO.
THERE IS STOCK TRANSFER BETWEEN 2 PLANTS AND 2 PLANTS ARE UNDER DIFFERENT COMPANY CODES.
1 I have created a PO.
2.Delivery through VL10D
3.Picking-vl02n
4.Created Bill-VF01
5.Created Invoice and saved it
When I am doing MIGO the excise values are not following.in migo SCREEN.I I want to know do i need to post EXCISE INVOICE and how to do the same.
Pl let me know anything is missed out so that excise invoice is not flowing in MIGO screen.
Regards
Manash

Hi,
Have you miantained Tax code in STO ? if yes, then have you mainatained Settoff as 100% for that Tax Code in FV11 for which combination you are using
SETOFF Must Be Maintained:-
JMX1 --     IN: A/P BED setoff
JEX1 ---      Ecess Setoff Sta
HX1     IN: A/P SECess SOTot
If it is there please follow the Following steps for STO
1.     Create Purchase Order(STO) using ME21N
2.     Create Outbound Delivery using VL10B
3.     Create Billing Document using VF01
4.     Create Excise Invoice using J1IIN
5.                   GR with respect to Inbound delivery and in Excise Invoice give number of VF01.
Hope Help U !
Regards,
Pardeep Malik

Sub Contracting Values are not flowing in to COPA

Hi,
PP guy has run Sub-Contracting scenario, later when i see the postings in COPA, those are not flowing into COPA. Amount is showing only in FI.
510085 Consumption - Subcontracting =800
520085 Inventory Change - Subcontracting = -5800
How to bring them into COPA report. Please advise me..
Thanks
KB

Add those cost elements to the automatic account assignment table (t-code OKB9) ans click the profitability segment assignment box. If using cost based COPA, assign these cost elements to a PA transfer structure (KEI2) so that they are assigned to the correct value field.
thanks,

COGS Values are not flowing to COPA

HI
Dear experts
here i have prepared copa report , but cogs values are not comming to copa report
cogs elements have been created by taking cost element category "1"
Regards
RAJESH

Hi,
Can you check whether COPA document is created for billing document and COGS value field is updated in this document? If this value is not updated then you need to check COGS value field mapping to COGS condition type (generally VPRS).
If the COGS value is updated in COPA document then you need to check COPA form and report.
Let me know if you need further details.
Thanks & Regards,
ADI

Created a trigger but new values are not inserting in the backup table

I have created a backup table and writter a trigger on a table such that after update old values and new values are to be inserted into the backup table, but new values are not inserting. I am giving the code please help me
create or replace trigger "SUPPQUOTES_AUDIT"
after update or delete on phsuppquotes for each row
begin
insert into phquotes_audit(cprc_new,suppcode,itemcode,cprc_old,negodt,validdt,userid,TRANDATE) values
(:new.cprc,:old.suppcode,:old.itemcode,:old.cprc,:old.negodt,:old.validdt,:old.userid,SYSDATE);
end;

old values and new
values are to be inserted into the backup table, butwell you have only one insert there, inserting old values with a new id (which is ok if you don't update the id column, but I don't think that :new is available for deleting ops); you should have two inserts:
insert into
phquotes_audit(cprc_new,suppcode,itemcode,cprc_old,negodt,validdt,userid,TRANDATE) values (:old.cprc,:old.suppcode,:old.itemcode,:old.cprc,:old.negodt,:old.validdt,:old.userid,SYSDATE);
if (updating) then
insert into phquotes_audit(cprc_new,suppcode,itemcode,cprc_old,negodt,validdt,userid,TRANDATE) values (:new.cprc,:new.suppcode,:new.itemcode,:new.cprc,:new.negodt,:new.validdt,:new.userid,SYSDATE);
end if;
gojko adzic
http://gojko.net

Measure Values are not shown in the pivot tables

Measures without aggregation (in rpd) are not shown in pivot table.
Im trying to add multiple columns in the fact table as measures,one which is summable had has the SUM function and three which are not summable.
The initial report will be as follows and I have been able to get the data displayed.
Year | Month| Company Name| SUM(C1)| C2|C3
However if I pivot the table as follows data in column C2 and C3 are not Displayed.
Columns
     Year
          Month
          Company
Rows
Measure Lablel
Measures
     SUM(C1)
               C2
               C3
Should we have an aggregation rule applued in C2 and C3 ?

Yes, all the column entries must have agg rule. You can specify one such as 'first' in the pivot table.

Values are not flow to COPA

Can you please clear some point.-
1.According to my understanding, From SD data will flow through condition type,which is assign with value field and condition types are assign with Pricing Procedure.
In my problem, Condition type-YREC(Packing tax) is in Pricing Procedure and YREC assign with value field VV031 but amount is not flow to COPA.
2.Please tell me the FI flow to COPA
Please help me.

<b>Pl try KE4ST billing transfer simulation</b>
Simulate Billing Document Transfer
In the activity "Simulating the Transfer of Documents from Billing", you have the option of simulating the transfer of billing document data into Profitability Analysis.
Simulation occurs on the basis of the Customizing settings valid at the time it is carried out. You can view the characteristics and value fields of the line item to be written to COPA.
The function "Valuation analysis" allows you to perform an analysis of the valuation strategy valid for valuating billing document data.
You can also restart the simulation of document transfers for billing documents that have already been transferred. This option should simplify in particular the analysis of error situations that have arisen.
Performing this simulation causes no data to be posted to COPA or to other modules.
<b>Check tcode KEAT also</b>
Check Value Flow in Billing Document Transfer
In this activity, you can compare your actual data in Profitability Analysis with the data posted in Financial Accounting (FI). This makes it possible to analyze the flow of values from SD billing documents to CO-PA, find and analyze any differences between the different applications.
Billing data is stored by condition types in SD, accounts in FI, and value fields in costing-based CO-PA. The reconciliation report yields a list of the balances for value fields, condition types, and profit and loss accounts.

Decimal values are not flowing to Excise Invoice created in J1IIN

Dear Sap Gurus,
Please help me with the problem. After creation of invoice in VF01 when i am creaing outgoing excise invoice decimal values for BED, ECS and SEC. ECess( AT1) are not coming instead values are rounded of to nearest whole number.
for ex.
if invoice values are as below
BED= 16
ECS= 3.2
HSC= 1.6
when excise iinvoice is created values are changes as below
BED= 16
ECS= 3
HSC= 2
please give propeer solution
reg.
suresh

Check in Logistics - General -> Tax on Goods Movements -> India -> Basic Settings -> Maintain Company Code Settings.
Also ensure that in V/06, for the respective excise condition types, rounding is not activated.
thanks
G. Lakshmipathi

AED and SED values are not flowing into Order

Dear Gurus,
We are using ECC 6 and TAXINJ. We did all the CIN configurations to the best of my knowledge. JMOD is flowing normally. But AED & SED are not. UTXJ is coming as also JIN6 (VAT), E Cess and S&HECess. We dont have Cess in the client's company, so Cess is not to be considered.
If a check list can be given, maybe I can check my customization with it, since I am an SD consultant and alot of things are involving MM too. Unfortunately we dont have any MM guy with us for the time being.
Any answers are most welcome.
Thanks and regards.
Venkat - Hyd.

Hi,
Go to SPRO > Logistics - General > Tax on Goods Movements > India > Basic Settings > Determination of Excise Duty > Maintain Excise Defaults
Here check whether AED and SED condition types are assigned under columns A/R AED Cond and A/R SED Cond respectively. If not then assign and check.
Also check in FV12 for the Tax Code used whether condition record has been maintained as 100 % for AED and SED conditions. If yes then check in J1ID, for "Excise Tax Rate", maintain rates for AED and SED.

Lead time values are not appearing in the report for current year.

Hi friends,
Iam checking a report in production. where lead time values are displayed as 0 for 1 key figure lead time3 (w/0 dim) . i found there is a formula for this it shows like NODIM ( 'Lead Time 3' ).and there is a value for cal.lead time
how can i get values in the report.
Thanks ,
VRV.

Hi,
Although your question is not clear, I understood that the formula built on that KF is NODIM. Basically it means, units of measurement is not considered when calculating.
Eg: 5 Minutes + 5 Kilograms = 10
You please try to analyze your KF by the above logic. Then you would be able to figure out why the data is not appearing in the report..
Assign if helps...
Regards,
Suman

CO-PA- Actual Values are not flowing in the CO-PA

Similar Messages

Maybe you are looking for