CO-PA External Data Transfer

Hello people
I am trying to use KEFC to load data from an external flat file (txt)
a) I used  Define Data Interface KEFA using CE3XXXX Y CE4XXXX tables.
b) I used Maintain Transfer Rules KEFB,  defining for characteristics the sender field and for ratios the formula field
c) Then I should create a txt file with the same order of the fields above defined ? or I need to define something more previous to use KEFC ?
because at the moment to try it, using parameters :
Sender structure : 10 (created with KEFA)
Input file : C:\10.txt
Editing : test run (flag)
The following message appear ; Enter either the physical file name or the logical file name
Thanks a lot!

Hi,
This error occurs when you specify the wrong file path. Please check the path you provide in the logical or physical input file name is correct. Also you need to specify a out put file name.
Please check these entries.
Regards,
Abhisek

Similar Messages

  • Any info about EDT (External Data transfer)

    Hi,
    I am working in insurance module of SAP. There is a business object called Business Partner which we need to migrate from legacy to R/3.
    Now for migration of Business partner generally LSMW is not used. People here use EDT (External data transfer).
    Does some one know about EDT as data transfer tools ?
    Regards,
    Rajesh.

    Hi Rajesh,
    Please check this EDT online document.
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CADATA/CADATA.pdf
    Hope this will help.
    Regards,
    Ferry Lianto
    Please reward points if helpful.

  • CO-PA External Data Transfer (KEFC)

    Hello,
    I am using KEFC t-code for external data transfer into CO-PA. The company code currency is activated at Operating Concern level.
    So,  KEFC is creating  two records 1) record in USD  2) record in EUR (company code currency). 
    I am not able to figure out what exchange rate type it is using during the conversion.
    Any ideas.
    Thanks
    Sanjiv Agrawal

    Hi Sanjeev,
         Please refer to attached notes 508273 and 639180 and let me know if they help.
    Best Regards,
    Abhisek

  • COPA exit COPA0007 for external data transfer

    Hello all,
    Have anyone already used COPA0007 Enhancement?
    Is ther any customizing that is needed in order to SAP stop execution with a break-point in the FM's associated.
    I'm trying to change data in external data transfer and I can not stop execution when running T-CODE KEFC.
    Best regards,
    Francisco Fontoura

    Hi,
      Please read note 508273.
    regards
    Waman

  • Error in KEFC transaction - External Data Transfer

    I am getting this error while using external data transfer function using KEFC.
    Plan version is not supported -> check your entry
    Message no. KG 029
    Diagnosis
    Plan version"xx" has not been created in operating concern"xxxx"
    Procedure
    Transfer version"xx" to operating concern"xxxx" and maintain the attributes for that version.
    I have checked plan version settings. It has been created for operating concern as well. I am not sure how to resolve this. Any suggestion or help would be appreciated.

    Hi AP,
      Please check whether you defined a constant value for characteristic VERSI (Version) in the transfer rules for your sender structure. If you don't want to define a constant value there you have to assign a field from your external structure and fill the version in your external file. In this case please consider to fill the field in the following format '1  ' for version 1 (don't use '001').
      Please refer and implement note 576807 in your system if it is in your system . Also refer note  508273 for a possible list of problems in external data transfer.
    Best Regards,
    Abhisek

  • External data transfer into CO - Profitabilty Analysis tables

    Gurus, Sending this again as the earlier one was not answered. Please give us some insight ASAP.
    We are implementing the custom allocations to CO-PA (Profitability Analysis) records externally and trying to post close to million records into CO-PA table CE1xxxx. What is the most efficient method should be used for the posting of the externally created records into CO-PA table. Transaction KE21 is used for one entry at a time. We need to perform the mass data transfer. We also checked the BAPI BAPI_COPAACTUALS_POSTCOSTDATA. It clearly says that it is not for mass data transfer. Also, it updates the CE4xxxx table only. We need the data posted to CE1xxxx table. Any ideas!!!
    There is a transaction KEFC - External data transfer to CO-PA. Has anyone used it? Please provide your insight on this transfer method.
    Any suggestions are appreciated.
    Thank you.

    Ashish,
    We use KEFC on a regular basis to upload actual sales data to PA from a third system.
    An upload file is created in Excel, saved as a TXT file. The structure of that excel file is equal to the structure defined in customizing: define data interface to find the structure and: define structure of external data transfer to see the respective values of the columns you need in your excel file.
    Hope this works for you!
    Regards,

  • External data Transfer - Loan Module (t.code - KCLJ)

    Hi Expert
    I have upload the loan source data through t.code KCLJ.  and it showing me External data transfer completed with return code: 4. there is no error but no loan is created in server and also tables is not updated. is there any further step to update a loan transaction through EDT. i  read SAP documentation here it's show that data saved in data pool. Please tell me what's the next step to update the loan data.
    Please  help
    Regards
    Gaurav Gupta

    Hi, how are you? My name is Santiago, I'm working in KCLJ trx. and I'm trying to upload my file, but I cant. Cuoud you fix your error? Do you have any documentation or an example of your file?
    thanks
    Santiago

  • FCHX - External data transfer  file format

    FCHX - External data transfer  creates a one line row of AP checks. I need to convert this flat file to bank format specifications. I have a program to do this. My problem is how do I convert the one line row into multiple line rows so I can use this in my conversion program.

    Hi Kotta
    What for you have created structure? is it for BP or IO or CA?
    These are the Std structures provided by SAP for loading master data:
    rkct994 - BCA Insurance SENDER
    rkct995 - Insurance Object
    rkct996 - Contract Data
    rkct997 - Partner Data SENDER
    All these structures contains AKTYP field in it.
    Can you post more details.

  • Loans Managements - Externa Data Transfer.

    Hi Expert.
    I need help you.
    I need create loans with their conditions.
    How use the transactions of Externa Data Transfer.
    You have information complete for use this tools EDT.

    Hi,
    The process of Migration with the Tool EDT was successful..!!!
    Thanks..!!!
    Edited by: arrova on Sep 22, 2010 6:14 PM

  • COPA : External data transfer

    Dear Guru`s,
    While executing KEFC t-code to upload external data into COPA,system it is showing error.
    Below are the screen shots attached..
    Regards
    Nitisha

    Hi Nitisha
    I believe this has something to do with the format or the values (content) of the file you are trying to upload.
    Check the following link too and see if you get any pointers to help resolve your issue
    Error executing transaction KEFC
    Issue with KEFC transaction
    Error in KEFC transaction
    Hope its helpful
    Regards
    Mustafa

  • How to implement a conversion rule in KC7R (External Data transfer-Tool)

    Hi,
    I am familiar with programming conversion rules in ABAP in the LSMW and IS-U Migration workbench.
    Unfortunately we have to work with EDT (transaction KCLJ).
    I need to implement a simple conversion rule: migration file has the external BP number BPEXT and I must retrieve the internalone (PARTNER) for the migration program.
    So I must implement a short ABAP code (select single * from BUT000 ...).
    Now I see that in KC7R you can use constants and conversion rules. There are also "General Ruels" and "conversion routines".
    Can someone explain how to implement this simple ABAP conversion rule in KC7R giving a short example?
    This would be great.
    EDT is the workst of all SAP Standard Migration Tools I have seen.....
    Kind regards,
    Thomas

    Thomas,
    Coud you please share your findings as I am now in a similar to your original post.
    ie I too would like to know how to code convesions for use within the transfer rules used by KCLJ.
    Kind Regards,
    Hiten Mistry.

  • External data transfer with KEFC.

    Hi,
    We are trying to make an upload of a cvs file with tcode KEFC with SAP ECC 6.0.
    We have defined the structure and the transfer rules (KEFA and KEFB).
    The same file has been used with SAP 4.6 with the same structure and transfer rules.
    The upload has been made correctly on 4.6 while for ECC 6.0 we have a problem.
    The screen after the upload gives a list with the data read from the csv file, and for some field the value is missing (GJAHR, PERBL and MENGE).
    Opening the log generated, an empy list of the errors is shown (the light is red but all the record are blank).
    I don't know if the problem is related to the file, but uploading the same file in 4.6, the transfer data is correct.
    We have created the same structure for the two environments with the same field and the same lenght:
    (KEFA)
    Sender field 4.6     Type 4.6     Lenght 4.6     Sender field 6.0     Type 6.0     Lenght 6.0
    BUKRS                       CHAR        4     BUKRS                     CHAR     4
    WERKS                       CHAR        4     WERKS                     CHAR     4
    ARTNR                       CHAR       18     ARTNR                     CHAR     18
    KOKRS                       CHAR           4     KOKRS                     CHAR     4
    GJAHR                       NUMC        4     GJAHR                     NUMC     4
    PERBL                       NUMC        7     PERBL                     NUMC     7
    ABSMG_ME       UNIT        3     ABSMG_ME     UNIT     3
    MENGE                       NUMC       12     MENGE                     NUMC     12
    VRGAR                       CHAR       1     VRGAR                     CHAR     1
    VERSI                       CHAR       3     VERSI                     CHAR     3
    VKORG                       CHAR       4     VKORG                     CHAR     4
    KNDNR                       CHAR       10     KNDNR                     CHAR     10
    VTWEG                       CHAR       2     VTWEG                     CHAR     2
    KTGRD                       CHAR       2     KTGRD                     CHAR     2
    PLTYP                       CHAR       2     PLTYP                     CHAR     2
    but we have identified a difference during the setting of the transfer rule (KEFB): in the 4.6 the sender field have a different lenght from the same ones in the ECC 6.0.
    We have tried to re-create a new structure, but the sender field lenght remain the same.
    Do you know which is the problem? Could be possible that the cause is this difference between the field lenght? If yes, how we can solve this problem?
    Thanks a lot for your collaboration,
    Regards,
    Jody Mancini.

    Hi Sandhya,
    checking in the KEFD tcode, all the transfer rule between sender fields and receiving fields are correct.
    Following you can find the rules:
    Rec. field      Description         Lenght      Sender field      Formula
    ABSMG       Sales quantity          8            ---                 MENGE
    ARTNR         Product                  36          ARTNR             ---
    BUKRS        Company Code        8           BUKRS             ---
    GJAHR         Fiscal year              8           GJAHR             ---
    KNDNR        Customer                20          KNDNR             ---
    KOKRS        CO area                  8           KOKRS             ---
    KTGRD         AcctAssgGr            4           KTGRD              ---
    PERIO          Period/year            14          PERBL              ---
    VKORG        Sales org.               8          VKORG              ---
    VRGAR         Record type            2          VRGAR              ---
    VTWEG        Distr. channel          4          VTWEG              ---
    WERKS        Plant                      8          WERKS              ---
    WWPLT        Price list type          4          PLTYP               ---
    The field MENGE is the Sales quantity of the input file and PERBL is concatenate of the period and year.
    The rules seems to be correct.
    The difference I wrote yesterday is relates to the lenght of the receiving field.
    In the ECC 6.0 all fields (excepting ABSMG) have a double lenght of 4.6:
    Field     Lenght 6.0     Lenght 4.6
    ABSMG     8     8
    ARTNR     36     18
    BUKRS     8     4
    GJAHR     8     4
    KNDNR     20     10
    KOKRS     8     4
    KTGRD     4     2
    PERIO     14     7
    VKORG     8     4
    VRGAR     2     1
    VTWEG     4     2
    WERKS     8     4
    WWPLT     4     2
    The problem could be this different lenght? If so, where I can modify the lenght of the receiving fields?
    Thanks again,
    Regards,
    Jody Mancini.

  • RKEVEXT3 - Execute CO-PA External Data Transfer - Report

    Hi All,
    We are using the report RKEVEXT3 to post the T&I data to the SAP. We have the input file and this program gets triggered and the job runs for around 3 hours. This long time is causing the problem for our overall job schedules..
    What we thought was to break the file into 4 smaller file and schedule 4 jobs together.. The all 4 job seems to run fine but when we look at the data we have realised that the final figures are less than the expected.  It seems that the last file data have been written into the COPA table and other 3 file data have been wiped off though while breaking the original file we have taken take of the fact that a material number should not be coming in different file..
    Can you please let us know if there is any restriction for the program or are we passing the wrong data on the selection screen.
    Regards,
    Vidya.

    Dear Jose,
    Unfortunately in UNICODE system fields with type I or F and
    even P in sender strucure are not supported. Only fields with type character are allowed.
    Please change your sender structure in such a way.
    There is no possibility in an unicode system to have in sender structure data type packed or floating numbers. Therefore, please change its definition to CHAR or NUMCHAR.
    Regards, Andrea

  • KEFC - CO-PA External Data Transfer  - Data Storage

    Hi everyone,
    Does anyone knows how does KEFC transaction works and where does it stores the data uploaded ?
    Thanks on any advice.

    Press the "I" button at the top of the selection screen. The program is well documented.
    Rob

  • External Data Transfer - Business Partners?

    Hi,
    I am migrating business partners from a legacy brown system to a Green SAP system using KCLJ and keep running into the error below:
    " Fields of record: PARTNER =  .  "
    I am unable to troubleshoot this and need some help. My numbering is internal and I have all the required fields in the text file. I`m not sure what other information to put here, if anybody has any ideas, i`m happy to share more.
    Thanks,
    Rohit.

    Hi,
    I am not sure if this is the correct forum to answer your query.
    But anyways, have you separated the data/fields by comma(,) or semicolon(;)
    Select the option in KCLJ appropriately.
    Regards,

Maybe you are looking for

  • Too Many Identical Files & Folders Showing In Sherlock

    Hi, Sherlock works for me the way it's designed to work. It finds what I'm looking for if the item is in the computer. But what are showing up in most of my searches, are long columns of file all with the same names, sometimes as many as forty or fif

  • Addition of fields in a user defined infotype

    hi everyone, well i had a doubt about adding new fields to a user defined infotype. the infotype was created long time back and is working fine in production. but now the user wants some more fields to be added into it. it already has data in it.. is

  • Serious problem using frameworks!!!

    Hi! I am using WAF framework... I have to do something like this.... a screen which supports Add,Delete,Copy functionality.... the details are shown row by row.... so When I hit the Add or Delete or Copy buttons once... a row is added or deleted or c

  • Error in export license assignment

    Hello gurus, For legal regulation EAR, I'm checking 3 partner functions for destination country i.e. End user, ship-to & sold-to. I have a sales order with end user in IN (India), ship-to in US & sold-to in SG (Singapore). When assigning an export li

  • NI6008

    Bonjour, je souhaiterais communiquer avec un module esclave en SPI. j'ai à ma disposition le NI USB 6008. J'aimerais savoir si je peux utiliser les 12 E/S numeriques de NI USB 6008 en tant que broches pour le SPI ( MOSI , MISO, CS, CLK).   merci de v