CO-PA load data from text file

Hello
At present, in our company, we load data from Excel files to CO-PA. Is there any way to load those data to CO-PA from text files ?
I will be grateful for any suggestions.

You can create a structure using KEFA, assign the Value fields in KEFB and then use KEFC to upload data against that structure.
You have various file format options, but I don't think Excel is one of them... you have have to save the file as txt and upload.
Play around with those transactions and come back if you need additional help.
Cheers.

Similar Messages

Loading data from text file into ListBox

I have data in a text file that I want to load into a
listbox... I have fully mastered handling strings and arrays so I'm
going to need some help...
I was wondering how do I get flash to load a text file that
contains the data below.. and display it line for line like I want
it to list down the component
"Launch;7.1.7.6"
"Engine;7.1.7.6"
"OSX;7.0.0.2" (or something close to that)
and I was wondering how do i just get it to take it fromt he
file.. line for line from where it says exeversion in the file and
list it in the listbox...
I'm really thankful to anybody that helps.
Data in text file:
quote:
exeversion=Launch;7.1.7.6;
exeversion=Engine;7.1.7.6;
exeversion=LinuxX86;7.0.0.2;
exeversion=LinuxPPC;7.0.0.2;
exeversion=LinuxMIPS;7.0.0.2;
exeversion=OSX;7.0.0.2;
exeversion=Config;7.1.7.6;
exeversion=UI;7.1.7.7;
exeversion=JAVA;7.0.4.5;

nobody cna help me? i really need to know or have a tutorial
or something so i can learn from it... i really appreciate anyone
who helps

Unable to find file error while loading data from text file to Oracle

Hi,
I am having a interface where i am loading a data of Text file to Oracle.
But when i am trying to do this i am getting following error.
ODI-1227: Task SrcSet0 (Loading) fails on the source FILE connection SAPMM.
Caused By: java.sql.SQLException: File not found: d:/mdb/#General.get_filename
     at com.sunopsis.jdbc.driver.file.FileResultSet.<init>(FileResultSet.java:160)
     at com.sunopsis.jdbc.driver.file.impl.commands.CommandSelect.execute(CommandSelect.java:57)
     at com.sunopsis.jdbc.driver.file.CommandExecutor.executeCommand(CommandExecutor.java:33)
SAPMM is connection name.
I am using get_filename to get the filename and it is fetching correct value as the this variable refreshes in previous step of this interface.
KM used for loading is File to SQL
What would be cause of this error?
Thanks,
Mahesh

Hi,
Did a testing and following are the result
I have
A> created package having steps like
1. Declaration of variable v_filename.
2. Refreshing variable v_filename.
3. Execution of Interface which gets the file name from v_filename and load into target table
Package executes successfully.
B> created package having steps like
1. Declaration of variable v_filename.
2. Refreshing variable v_filename.
3. Scenario of Interface which gets the file name from v_filename and load into target table
Package executes with erre as it is not able to find the file
C> created package having steps like
1. Declaration of variable v_filename.
2. Refreshing variable v_filename.
3. Execution of Interface which gets the file name from v_filename and load into target table
4. Now create a scenario of the package , use the generated scenario in another package say main_package
Execution of main_package is successful.
Thanks,
Sutirtha

Remove duplicates while loading data from text file

Hi,
Data in text file (some times has duplicates) is being loaded into Oracle 9i database using Informatica. To improve performance, we would like to remove duplicates at the time of each load using Oracle procedure. Could you please help me with this?
Thanks,
Lakshmi

No, our table doesn't have that. Most of the functionality is managed at the informatica level. Is there any other way? Thanks,

Cant get data from text file to print into Jtable

Instead of doing JDBC i am using text file as database. I cant get data from text file to print into JTable when i click find button. Goal is to find a record and print that record only, but for now i am trying to print all the records. Once i get that i will change my code to search desired record and print it. when i click the find button nothing happens. Can you please take a look at my code, dbTest() method. thanks.
void dbTest() {
DataInputStream dis = null;
String dbRecord = null;
String hold;
try {
File f = new File("customer.txt");
FileInputStream fis = new FileInputStream(f);
BufferedInputStream bis = new BufferedInputStream(fis);
dis = new DataInputStream(bis);
Vector dataVector = new Vector();
Vector headVector = new Vector(2);
Vector row = new Vector();
// read the record of the text database
while ( (dbRecord = dis.readLine()) != null) {
StringTokenizer st = new StringTokenizer(dbRecord, ",");
while (st.hasMoreTokens()) {
row.addElement(st.nextToken());
System.out.println("Inside nested loop: " + row);
System.out.println("inside loop: " + row);
dataVector.addElement(row);
System.out.println("outside loop: " + row);
headVector.addElement("Title");
headVector.addElement("Type");
dataTable = new JTable(dataVector, headVector);
dataTableScrollPane.setViewportView(dataTable);
} catch (IOException e) {
// catch io errors from FileInputStream or readLine()
System.out.println("Uh oh, got an IOException error!" + e.getMessage());
} finally {
// if the file opened okay, make sure we close it
if (dis != null) {
try {
dis.close();
} catch (IOException ioe) {
} // end if
} // end finally
} // end dbTest

Here's a thread that loads a text file into a JTable:
http://forum.java.sun.com/thread.jsp?forum=57&thread=315172
And my reply in this thread shows how you can use a text file as a simple database:
http://forum.java.sun.com/thread.jsp?forum=31&thread=342380

Error when executing interface which load data from csv file which has 320

Hi,
Can some one provide a resolution for below error:
I have created an interface which load data from csv file which has 320 columns, to a Synonym which has 320 columns in it
using LKM File to SQL, IKM Sql Control Append.
I am getting below error when executing the interface :
com.sunopsis.tools.core.exception.SnpsSimpleMessageException: ODI-17517: Error during task interpretation. Task: 6 java.lang.Exception: BeanShell script error: Sourced file: inline evaluation of: ``out.print("The application script threw an exception: java.lang.StringIndexOutOf . . . '' Token Parsing Error: Lexical error at line 2, column 42. Encountered: "\\" (92), after : "": <at unknown location> BSF info: Create external table at line: 0 column: columnNo
at com.sunopsis.dwg.codeinterpretor.SnpCodeInterpretor.transform(SnpCodeInterpretor.java:485)
     at com.sunopsis.dwg.dbobj.SnpSessStep.createTaskLogs(SnpSessStep.java:711)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:461)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2093)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:366)
     at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:300)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:292)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:855)
     at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)
     at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
     at java.lang.Thread.run(Thread.java:662)
Caused by: org.apache.bsf.BSFException: BeanShell script error: Sourced file: inline evaluation of: ``out.print("The application script threw an exception: java.lang.StringIndexOutOf . . . '' Token Parsing Error: Lexical error at line 2, column 42. Encountered: "\\" (92), after : "": <at unknown location>
BSF info: Create external table at line: 0 column: columnNo
     at bsh.util.BeanShellBSFEngine.eval(Unknown Source)
     at bsh.util.BeanShellBSFEngine.exec(Unknown Source)
     at com.sunopsis.dwg.codeinterpretor.SnpCodeInterpretor.transform(SnpCodeInterpretor.java:471)
     ... 11 more
Text: The application script threw an exception: java.lang.StringIndexOutOfBoundsException: String index out of range: 2 BSF info: Create external table at line: 0 column: columnNo
out.print("createTblCmd = r\"\"\"\ncreate table ") ;
out.print(odiRef.getTable("L", "COLL_NAME", "W")) ;
out.print("<?=(extTabColFormat.getUseView())?\"_ET\":\"\"?>\n(\n\t") ;
out.print(odiRef.getColList("", "[CX_COL_NAME]\\t"+
          "<?=extTabColFormat.getExtTabDataType(\\u0022[CX_COL_NAME]\\u0022,\\u0022[SOURCE_DT]\\u0022, \\u0022[DEST_WRI_DT]\\u0022, \\u0022[COL_FORMAT]\\u0022, \\u0022[BYTES]\\u0022, \\u0022[LONGC]\\u0022, \\u0022[SCALE]\\u0022)?>"
     , ",\\n\\t", "","")) ;
out.print("\n)\nORGANIZATION EXTERNAL\n(\n\tTYPE ORACLE_LOADER\n\tDEFAULT DIRECTORY dat_dir\n\tACCESS PARAMETERS\n\t(\n\t\tRECORDS DELIMITED BY 0x'") ;
out.print(odiRef.getSrcTablesList("[XFILE_SEP_ROW]","")) ;
out.print("'\n\t\t") ;
out.print(odiRef.getUserExit("EXT_CHARACTERSET")) ;
out.print("\n\t\t") ;
out.print(odiRef.getUserExit("EXT_STRING_SIZE")) ;
out.print("\n\t\tBADFILE\t\t'") ;
out.print(odiRef.getSrcTablesList("", "[RES_NAME]", "", "")) ;
out.print("_%a.bad'\n\t\tLOGFILE\t\t'") ;
out.print(odiRef.getSrcTablesList("", "[RES_NAME]", "", "")) ;
out.print("_%a.log'\n\t\tDISCARDFILE\t'") ;
out.print(odiRef.getSrcTablesList("", "[RES_NAME]", "", "")) ;
out.print("_%a.dsc'\n\t\tSKIP \t\t") ;
out.print(odiRef.getSrcTablesList("", "[FILE_FIRST_ROW]", "", "")) ;
out.print("\n") ;
if (odiRef.getSrcTablesList("", "[FILE_FORMAT]", "", "").equals("F")) {out.print("\n\t\tFIELDS\n\t\t") ;
out.print(odiRef.getUserExit("EXT_MISSING_FIELD")) ;
out.print("\n\t\t(\n\t\t\t") ;
out.print(odiRef.getColList("", "[CX_COL_NAME]\\tPOSITION([FILE_POS]:[FILE_END_POS])\\t"+
                    "<?=extTabColFormat.getExtTabFormat(\\u0022[CX_COL_NAME]\\u0022,\\u0022[SOURCE_DT]\\u0022, \\u0022DEST_WRI_DT\\u0022, \\u0022[COL_FORMAT]\\u0022, \\u0022[BYTES]\\u0022, \\u0022[LONGC]\\u0022, \\u0022[SCALE]\\u0022)?>"
                    , ",\\n\\t\\t\\t", "","")) ;
out.print("\t\t\n\t\t)\n\t)\n") ;
} else {out.print("\n\t\tFIELDS TERMINATED BY x'") ;
out.print(odiRef.getSrcTablesList("", "[XFILE_SEP_FIELD]", "", "")) ;
out.print("'\n\t\t") ;
if(odiRef.getSrcTablesList("", "[FILE_ENC_FIELD]", "", "").equals("")){out.print("\n\t\t") ;
} else {out.print("OPTIONALLY ENCLOSED BY '") ;
out.print(odiRef.getSrcTablesList("", "[FILE_ENC_FIELD]", "", "").substring(0,1)) ;
out.print("' AND '") ;
out.print(odiRef.getSrcTablesList("", "[FILE_ENC_FIELD]", "", "").substring(1,2)) ;
out.print("' ") ;
}out.print("\n\t\t") ;
out.print(odiRef.getUserExit("EXT_MISSING_FIELD")) ;
out.print("\n\t\t(\n\t\t\t") ;
out.print(odiRef.getColList("", "[CX_COL_NAME]\\t"+
                    "<?=extTabColFormat.getExtTabFormat(\\u0022[CX_COL_NAME]\\u0022,\\u0022[SOURCE_DT]\\u0022, \\u0022DEST_WRI_DT\\u0022, \\u0022[COL_FORMAT]\\u0022, \\u0022[BYTES]\\u0022, \\u0022[LONGC]\\u0022, \\u0022[SCALE]\\u0022)?>"
                    , ",\\n\\t\\t\\t", "","")) ;
out.print("\t\t\n\t\t)\n\t)\n") ;
}out.print("\tLOCATION (") ;
out.print(odiRef.getSrcTablesList("", "'[RES_NAME]'", "", "")) ;
out.print(")\n)\n") ;
out.print(odiRef.getUserExit("EXT_PARALLEL")) ;
out.print("\nREJECT LIMIT ") ;
out.print(odiRef.getUserExit("EXT_REJECT_LIMIT")) ;
out.print("\n\"\"\"\n \n# Create the statement\nmyStmt = myCon.createStatement()\n \n# Execute the trigger creation\nmyStmt.execute(createTblCmd)\n \nmyStmt.close()\nmyStmt = None\n \n# Commit, just in case\nmyCon.commit()") ;
****** ORIGINAL TEXT ******
createTblCmd = r"""
create table <%=odiRef.getTable("L", "COLL_NAME", "W")%><?=(extTabColFormat.getUseView())?"_ET":""?>
     <%=odiRef.getColList("", "[CX_COL_NAME]\t"+
          "<?=extTabColFormat.getExtTabDataType(\u0022[CX_COL_NAME]\u0022,\u0022[SOURCE_DT]\u0022, \u0022[DEST_WRI_DT]\u0022, \u0022[COL_FORMAT]\u0022, \u0022[BYTES]\u0022, \u0022[LONGC]\u0022, \u0022[SCALE]\u0022)?>"
     , ",\n\t", "","")%>
ORGANIZATION EXTERNAL
     TYPE ORACLE_LOADER
     DEFAULT DIRECTORY dat_dir
     ACCESS PARAMETERS
          RECORDS DELIMITED BY 0x'<%=odiRef.getSrcTablesList("[XFILE_SEP_ROW]","")%>'
          <%=odiRef.getUserExit("EXT_CHARACTERSET")%>
          <%=odiRef.getUserExit("EXT_STRING_SIZE")%>
          BADFILE          '<%=odiRef.getSrcTablesList("", "[RES_NAME]", "", "")%>_%a.bad'
          LOGFILE          '<%=odiRef.getSrcTablesList("", "[RES_NAME]", "", "")%>_%a.log'
          DISCARDFILE     '<%=odiRef.getSrcTablesList("", "[RES_NAME]", "", "")%>_%a.dsc'
          SKIP           <%=odiRef.getSrcTablesList("", "[FILE_FIRST_ROW]", "", "")%>
<% if (odiRef.getSrcTablesList("", "[FILE_FORMAT]", "", "").equals("F")) {%>
          FIELDS
          <%=odiRef.getUserExit("EXT_MISSING_FIELD")%>
               <%=odiRef.getColList("", "[CX_COL_NAME]\tPOSITION([FILE_POS]:[FILE_END_POS])\t"+
                    "<?=extTabColFormat.getExtTabFormat(\u0022[CX_COL_NAME]\u0022,\u0022[SOURCE_DT]\u0022, \u0022DEST_WRI_DT\u0022, \u0022[COL_FORMAT]\u0022, \u0022[BYTES]\u0022, \u0022[LONGC]\u0022, \u0022[SCALE]\u0022)?>"
                    , ",\n\t\t\t", "","")%>
<%} else {%>
          FIELDS TERMINATED BY x'<%=odiRef.getSrcTablesList("", "[XFILE_SEP_FIELD]", "", "")%>'
          <% if(odiRef.getSrcTablesList("", "[FILE_ENC_FIELD]", "", "").equals("")){%>
          <%} else {%>OPTIONALLY ENCLOSED BY '<%=odiRef.getSrcTablesList("", "[FILE_ENC_FIELD]", "", "").substring(0,1)%>' AND '<%=odiRef.getSrcTablesList("", "[FILE_ENC_FIELD]", "", "").substring(1,2)%>' <%}%>
          <%=odiRef.getUserExit("EXT_MISSING_FIELD")%>
               <%=odiRef.getColList("", "[CX_COL_NAME]\t"+
                    "<?=extTabColFormat.getExtTabFormat(\u0022[CX_COL_NAME]\u0022,\u0022[SOURCE_DT]\u0022, \u0022DEST_WRI_DT\u0022, \u0022[COL_FORMAT]\u0022, \u0022[BYTES]\u0022, \u0022[LONGC]\u0022, \u0022[SCALE]\u0022)?>"
                    , ",\n\t\t\t", "","")%>
<%}%>     LOCATION (<%=odiRef.getSrcTablesList("", "'[RES_NAME]'", "", "")%>)
<%=odiRef.getUserExit("EXT_PARALLEL")%>
REJECT LIMIT <%=odiRef.getUserExit("EXT_REJECT_LIMIT")%>
# Create the statement
myStmt = myCon.createStatement()
# Execute the trigger creation
myStmt.execute(createTblCmd)
myStmt.close()
myStmt = None
# Commit, just in case
myCon.commit().
     at com.sunopsis.dwg.dbobj.SnpSessStep.createTaskLogs(SnpSessStep.java:738)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:461)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2093)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:366)
     at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:300)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:292)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:855)
     at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)
     at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
     at java.lang.Thread.run(Thread.java:662)

The issue is encountered because the text delimiter used in the source file did not consist of a pair of delimiters.
Please see support Note [ID 1469977.1] for details.

Loading data from .csv file into existing table

Hi,
I have taken a look at several threads which talk about loading data from .csv file into existing /new table. Also checked out Vikas's application regarding the same. I am trying to explain my requirement with an example.
I have a .csv file and I want the data to be loaded into an existing table. The timesheet table columns are -
timesheet_entry_id,time_worked,timesheet_date,project_key .
The csv columns are :
project,utilization,project_key,timesheet_category,employee,timesheet_date , hours_worked etc.
What I needed to know is that before the csv data is loaded into the timesheet table is there any way of validating the project key ( which is the primary key of the projects table) with the projects table . I need to perform similar validations with other columns like customer_id from customers table. Basically the loading should be done after validating if the data exists in the parent table. Has anyone done this kind of loading through the APEX utility-data load.Or is there another method of accomplishing the same.
Does Vikas's application do what the utility does ( i am assuming that the code being from 2005 the utility was not incorporated in APEX at that time). Any helpful advise is greatly appreciated.
Thanks,
Anjali

Hi Anjali,
Take a look at these threads which might outline different ways to do it -
File Browse, File Upload
Loading CSV file using external table
Loading a CSV file into a table
you can create hidden items in the page to validate previous records before insert data.
Hope this helps,
M Tajuddin
http://tajuddin.whitepagesbd.com

[Load data from excel file [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messa

Error
[Load data from excel file [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There
may be error message
I am using BIDS Microsoft Visual Studio 2008 and running the package to load the data from excel .
My machine has 32 bit excel hence have set property to RUN64BITRUNTIME AS FALSE.
But the error still occurs .
I checked on Google and many have used Delay validation property at Data flow task level to true but even using it at both excel connection manager and DFT level it doesnt work
Mudassar

Thats my connection string
Provider=Microsoft.ACE.OLEDB.12.0;Data Source=E:\SrcData\Feeds\Utilization.xlsx;Extended Properties="Excel 12.0;HDR=NO";
Excel 2010 installed and its 32 bit edition
Are you referring to install this component -AccessDatabaseEngine_x64.exe?
http://www.microsoft.com/en-us/download/details.aspx?id=13255
Mudassar
You can try an OLEDB provider in that case
see
http://dataintegrity.wordpress.com/2009/10/16/xlsx/
you might need to download and install ms access redistributable
http://www.microsoft.com/en-in/download/details.aspx?id=13255
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Load data from xml file in oracle data base

Hi all,
I'd like to know if is posible to load data from a file xml into a table of oracle data base through SQL*LOADER, loaded only in a normal column no with type XMLType , for example
I have a xml file
<person name="kate" surname="fari" city="new york" >
<son name="faus" age="18"/>
<son name="doly" age="10"/>
</person>
and I load in table :
table :person
column
name surname city
kate fari new york
table : son
name age
doly 10
faus 18
thank you for your return !!!!!!!!!
Ninova
Edited by: user10474037 on 30 mai 2011 08:47
Edited by: user10474037 on 30 mai 2011 08:48
Edited by: user10474037 on 30 mai 2011 08:48
Edited by: user10474037 on 30 mai 2011 08:49
Edited by: user10474037 on 30 mai 2011 08:50

Hi
This May be found at
SQL Loader to upload XML file

Loading data from flat file...

Hello,
I am actually experiencing a problem where I cant load data from a flat file into a table. I have actually reverse engineered the flat file into ODI. But the thing is I don't know how to load the data that is reversed into a RDBMS table. Added, I don't know how create this RDBMS table form within ODI to be reflected on the DB. Added, don't know how to load the data from the flat file onto this table without having to add the columns in order to map between the flat file and the table.
In conclusion, I need to know how to create an RDBMS table from within ODI on the database. And how to automatically map the flat file to the DB table and load the data into the DB table.
Regards,
Hossam

Hi Hossam,
We can used ODI procedure to create table in the DB.
Make sure you keep the column name in the table name same as the column name in FLAT FILE so that it can automatically map the column.
and regarding Loading data from FLAT File i.e. our source table is FLAT FILE till ODI 10.1.3.4 we need to manually insert the datastore since the file system cannot be reversed.
Please let me know Hossam if i can assis you further.
Thanks and Regards,
Andy

Load data from XML files into BI

Hi All,
Can any one guide me through the steps which involve in loading data from XML files into BI?
Thanks
Santosh

Hi James,
I have followed upto step No: 12 .
Please could you let me know how to link the XML file on my local drive to BI,
I am not able to find figure out where to specify the path of the XML file to be loaded into BI.
Thanks In Advance
Regards,
San
1. Create a Infosource(ZIS), with transfer structure in accordance with the structure in the XML file. (You can open the XML file with MS Excel.This way you can get to know the structure).
2. Activate the transfer rules.
3. After activation ;from the Menu Bar , Select Extras>Create BW Datasource with SOAP connection.
4.Now Activate the Infosurce again, this creates an XML based Datasource(6AXXX...)
5.These steps would create two sub nodes under the Infosource(ZIS).
6.Select Myself system and create a data package and execute it run in Init mode(without Data Transfer).
7. This would create an entry in RSA7(BW delta Queue)
8. Again create another Delta Infopackage under it, and run it. Now the Datasource(6AXXXXXX..) would turn green in RSA7.
9.In Function builder(SE37) select your FM( do a search ,F4, on the datasource 6AXXX....) .
10.Inside this RFC based FM , from the Menu Bar select Utilities>more Utilities>Create Web services>From Function module.
11.A wizard will guide you through the next steps .
12.once this is done a Web serrvice would be enabled in WSADMIN. Select your FM and execute it.
13.From here you can upload the data from XML file into BW delta queue.
Edited by: Santosh on Nov 30, 2008 2:22 PM

How to load data from UTL file to database

Hi All,
I am new in this technologies.
I am facing below problem to load data from utl file to database .
below is the script written by me :
CREATE OR REPLACE PROCEDURE load_data AS
v_line VARCHAR2(2000);
v_file UTL_FILE.FILE_TYPE;
v_dir VARCHAR2(250);
v_filename VARCHAR2(50);
v_1st_Comma NUMBER;
v_2nd_Comma NUMBER;
v_deptno NUMBER;
v_dname VARCHAR2(14);
v_loc VARCHAR2(13);
BEGIN
v_dir := ':f/rashi/dataload';
v_filename := 'fake.txt';
v_file := UTL_FILE.FOPEN(v_dir, v_filename, 'r');
LOOP
BEGIN
UTL_FILE.GET_LINE(v_file, v_line);
EXCEPTION
WHEN no_data_found THEN
exit;
END;
v_1st_Comma := INSTR(v_line, ',' ,1 , 1);
v_2nd_Comma := INSTR(v_line, ',' ,1 , 2);
v_deptno := SUBSTR(v_line, 1, v_1st_Comma-1);
v_dname := SUBSTR(v_line, v_1st_Comma+1, v_2nd_Comma-v_1st_Comma-1);
v_loc := SUBSTR(v_line, v_2nd_Comma+1);
DBMS_OUTPUT.PUT_LINE(v_deptno || ' - ' || v_dname || ' - ' || v_loc);
INSERT INTO don
VALUES (v_deptno, UPPER(v_dname), UPPER(v_loc));
END LOOP;
UTL_FILE.FCLOSE(v_file);
COMMIT;
END;
show error
I am getting the below errors:
LINE/COL ERROR
3/8 PL/SQL: Item ignored
3/8 PLS-00201: identifier 'UTL_FILE' must be declared
15/1 PL/SQL: Statement ignored
15/1 PLS-00320: the declaration of the type of this expression is
incomplete or malformed
20/1 PL/SQL: Statement ignored
20/19 PLS-00320: the declaration of the type of this expression is
incomplete or malformed
36/1 PL/SQL: Statement ignored
LINE/COL ERROR
36/17 PLS-00320: the declaration of the type of this expression is
incomplete or malformed
could anyone please advice me on above error.
thanx.

First of all, is file located on (or is accessible from) database server? If not - you can't load it neither with UTL_FILE nor with external table. You need to use client side tool like SQL*Loader or write your own client side load. If file is accessible from database server, then, as sb92075 noted, external table (assuming you are not on some ancient Oracle version) is the way to go.
SY.

Loading data from flat file to ODS

Hi Experts,
I have a developed a report, in which Flat file is the datasource and data target as DSO.
Here I have one requriment to Increatment the counter value in TVARVC table after every load compleate.
Can this be done thru Process chain? I belive this can be done thru process chain by creating variable.
If this can be done thru Process chains can any experts send me sample examples code.
Thanks In Advance.
Sreedhar.M

Hi sridhar,
     We have a similar scenario in which we will load data from flat file to datasource the file name (x_20081010.dat) of such format being fetched from the low value of the TVARVC table ... once successfully executed we had program to increment the value of low which increments by one day adn the next day the file with that will be placed in the application server...
    U can create a abap program varaint and attribute for that and u can achieve that.... this is sample code which searches for the string and after some coding i.e once ur file has been loaded successful code u can write similar code to increment or counter values which u are asking for...
search s_tvarvc-low for '20'.
        if sy-subrc ne 0.
          sy-msgty = 'E'.
          sy-msgid = 'ZWM1'.
          sy-msgno = '000'.
          sy-msgv1 = 'Unable to find DATE to increment'.
          raise unable_increment.
        else.
          w_date = s_tvarvc-low+sy-fdpos(08).
          w_nextdate = w_date + 1.
          replace w_date with w_nextdate into s_tvarvc-low.
          modify tvarvc from s_tvarvc.
        endif.
Regards
vamsi

Loading data from multiple files to multiple tables

How should I approach on creating SSIS package to load data from multiple files to multiple tables. Also, Files will have data which might overlap so I might have to create stored procedure for it. Ex. 1st day file -data from au.1 - aug 10 and 2nd day
file might have data from aug.5 to aug 15. So I might have to look for max and min date and truncate table with in that date range.

thats ok. ForEachLoop would be able to iterate through the files. You can declare a variable inside loop to capture the filenames. Choose fully qualified as the option in loop
Then inside loop
1. Add execute sql task to delete overlapping data from the table. One question here is where will you get date from? Does it come inside filename?
2. Add a data flow task with file source pointing to file .For this add a suitable connection manager (Excel/Flat file etc) and map the connection string property to filename variable using expressions
3. Add a OLEDB Destination to point to table. You can use table or view from variable - fast load option and map to variable to make tablename dynamic and just set corresponding value for the variable to get correct tablename
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Loading data from a file?

hi, could anyone please help me with this:
in a small application involving a Company with Programmers as its employees, i am supposed to add a functionality to Load data from a file. i have alomost done it using fileTextReader(); the only problem now is for some reason even though my file contains data of only one programmer, but the system is adding two programmer, one of them with null values. similarly if i supply details of 4 programmer in the file, 5 will get added, one of them with nulls.
i have checked my addEmployee method which is fine. i have checked it by giving data using command promp, it works fine this way. here is the code i am using for method: loadFromtheFile(); (could anyone find the reason!!)
// Get the file name from the user.
ConsoleIO.out.print("\t" + "Enter the file name >>> ");
String fileName = ConsoleIO.in.readString();
// Initialise the SoftwareHouse from the file
try {
// Open the file
FileTextReader inputFile = new FileTextReader( fileName );
while( inputFile.isEOF() == false ) {
// Get the data from the file
String name = inputFile.readLine();
int payno = inputFile.readInt();
int salary = inputFile.readInt();
int year = inputFile.readInt();
String language = inputFile.readLine();
// Add an employee to the SoftwareHouse.
theCompany.addEmployee( new Programmer(payno, salary, name, year, language) );
// Display the outcome
ConsoleIO.out.println( "\n\t" + theCompany.getStatus() );
catch (IOException exception) {
ConsoleIO.out.println("\n\t" + "Cannot open " + fileName);
}

i have done that and it works if only one programmer data is given in the file.....as soon as i would give data for 2 or more programmers it will assign wrong values to the wrong attributes. could u have a look if this is what u suggested me:
// Get the file name from the user.
ConsoleIO.out.print("\t" + "Enter the file name >>> ");
String fileName = ConsoleIO.in.readString();
// Initialise the SoftwareHouse from the file
try {
// Open the file
FileTextReader inputFile = new FileTextReader( fileName );
while( inputFile.isEOF() == false ) {
// Get the data from the file
String name = inputFile.readLine();
int payno = inputFile.readInt();
int salary = inputFile.readInt();
String language = inputFile.readLine();
int year = inputFile.readInt();
// Add an employee to the SoftwareHouse.
theCompany.addEmployee( new Programmer(payno, salary, name, year, language) );
// Display the outcome
ConsoleIO.out.println( "\n\t" + theCompany.getStatus() );
if(inputFile.readLine() == null){
break;
catch (IOException exception) {
ConsoleIO.out.println("\n\t" + "Cannot open " + fileName);
}

CO-PA load data from text file

Similar Messages

Maybe you are looking for