CO-PA reposting KE26; requiring CO doc not FI document

All, In our new environment 6.4, the KE26 transaction is only looking for CO doucments and not FI documents to repost. Reposting the FI document is much more desirable since this is easier to find. Can someone please tell me the steps to change the the KE26 requirements from a CO document to a FI document? What is driving the KE26 documents?
Thanks

Hi,
KE26 is used for internal posting between PA segment. FI reposting is not possible in SAP. Since this is against fundamental of Accounting which may directly link to P&l and Balance sheet of company.
If you want to repost FI you can use normal FI ds,
posting Where you can debit/Credit for which you want to change.
Regards,
Sreekanth

Similar Messages

The required directory was not found

"The required directory was not found or has a permission error."
This is the error message I get when I try to authorize my Mac Pro (10.4.10). I have repaired permissions, restarted, reinstalled iTunes, re-linked the iTunes home folder and checked all folder for correct permissions.
Joe

OK, I just got off of the phone with Apple and still no joy. They had me try a few things that did not work, then told me to Archive and Install, which did not either. Anyway, thanks for the additional help very note worthy, but still no joy. Also an email to iTunes Support took me here
http://docs.info.apple.com/article.html?artnum=93061
I have a Users/Shared folder but since the files we are talking about are invisible, I can see how it is structured.
And by the way I tried this one
http://discussions.apple.com/message.jspa?messageID=3577004#3577004
and it did not work. However, when I install a fresh copy of Tiger on the external it did authorize the computer and was able to play the downloads. But coping the invisible file to my boot drive was not successful. But , like I said the music did play when I started up from the external. So I guess that may be my only solution, unless someone can tell what the correct directory is and where it for iTunes downloads.

"This iPhone cannot be used because the required software is not installed"

Greetings,
I have a problem with my newly purchased iPhone 3G - iTunes will not recognize it, stating that "This iPhone cannot be used because the required software is not installed". Uninstall and reinstall iTunes, it says. I've done that several times, following the instructions for removal here: http://docs.info.apple.com/article.html?artnum=93698
Not working. The iPhone is recognized in Windows, and both the Apple Mobile Device and iPod services are running. I'm running out of options here - I managed to activate the iPhone on another computer, but I need to sync it with my own computer to make it usable.
I am running 32-bit Vista SP1 (fully updated) on a Travelmate 8200 laptop. iTunes version is the latest, obtained from Apple.
Any help would be greatly appreciated, my hair is turning gray over this.

If it were me, I'd make sure to uninstall all 4 of those services mentioned in that link you provided. Then make sure you've downloaded the iTunes package from this link http://www.apple.com/itunes/download/
Make sure you install, and keep installed, everything in that package. In other words don't uninstall anything that the package installs. I don't know this for a fact, but I'm pretty sure that at the very least your system will need both iTunes (most recent version) and QuickTime in order for the new 3G phone to function properly. If you download from the link provided above, you should get the latest version of iTunes and QuickTime. Hope this helps.
Wooops, . If your location requires you to download from another link, then by all means go to it. I just noticed that you're from Sweeden.
Message was edited by: QuickDraw

Internally required memory is not available in SMQ2

Hi All,
In our XI Production server one message in SMQ2 (Inbound) has been stucked.
Error details "Internally required memory is not available ".
This IDOC is having a size of 552 MB, when I checked the sap fourms I found that there is one instance profile parameter which is req to process a large message.
icm/HTTP/max_request_size_KB
The parameter can also be used in the SAP Web Dispatcher.
The default is 102 400 (100MB).
Do we need to set this parameter in our instance profile???
Currently this parameter is not present in our Production enviornment.
Pls suggest.
Regards,
Prashant

I will suggest that if icm/HTTP/max_request_size_KB is not set then set this up with a value higher than the size of the stuck IDOC and give it a try.
now icm/HTTP/max_request_size_KB is not dynamically switchable so you'll have to add the parameter via RZ10 and restart your system.
Also you can rad the XI tuning guide,
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/70ada5ef-0201-0010-1f8b-c935e444b0ad
Regards
Juan

Repost Function using Variable is not working

Hello experts! I am on BW-BPS 3.5. I have set up a repost function using variables to change a characteristic value for Business Unit.
1. I created 2 variables as Bus.Unit From and Bus.Unit To in the Planning Area. I am not using the variables in my planning level.
2. I entered the variables in the parameter group New Values area for the From and To Values.
3. My goal is when the user executes the Repost Function for a Variable Prompt should appear and have the user select the From Business Unit and To Business Unit.
The Variables are set up as USERVALUE User-Defined Values, Restriction of Values required by user and I have tried with/without option of Input Allowed by User.
Can you tell me what I am doing wrong, I expected a variable prompt when executing the Repost Function but it does not work.
Thank you,
Teri

Ravi, Thank you for your reply however I contiue to have errors or the execution does not repost (change any value) as noted below.
1. I have 2 Variables in Planning area var1 (from) var2 (to) for the same charateristic which is Business Unit
2. Business Unit is in the level, on the selection tab to add the variable I can only add 1 variable, So I added var1 (from) to the level.
3. Parameter group for old and new values - I have Var1 (from), var2 (to)
4. Report Function - are you referring to Reporting variables in BPS? I have set this up as suggested in the "How to Use Reporting Variable in BW-BPS" document.
5. Enter plan data: I receive prompt for VAR1, mandatory. At this point there is no value in Var2.
6. Execute Repost function - I receive an error to "Restrict Var2"
7. If I set variable values and add a value for Var2 I receive an error "The generated data is not contained in the selection condition".
Next I removed VAR1 from my planning level and turned on the option 'Selection in package' for Business Unit. This seems to work well.
What do you recommend?
Thank you,
Teri

HT1727 How do you grant permission for home sharing and authorizing? My mac did home share, but now says, "The required directory was not found or has a permissions error", when I try to authorize.

How do you grant permission for home sharing and authorizing? My mac did home share, but now says, "The required directory was not found or has a permissions error", when I try to authorize.

OK, I just got off of the phone with Apple and still no joy. They had me try a few things that did not work, then told me to Archive and Install, which did not either. Anyway, thanks for the additional help very note worthy, but still no joy. Also an email to iTunes Support took me here
http://docs.info.apple.com/article.html?artnum=93061
I have a Users/Shared folder but since the files we are talking about are invisible, I can see how it is structured.
And by the way I tried this one
http://discussions.apple.com/message.jspa?messageID=3577004#3577004
and it did not work. However, when I install a fresh copy of Tiger on the external it did authorize the computer and was able to play the downloads. But coping the invisible file to my boot drive was not successful. But , like I said the music did play when I started up from the external. So I guess that may be my only solution, unless someone can tell what the correct directory is and where it for iTunes downloads.

2-way SSL when WL7 is client; get "Required peer certificates not supplied by peer"

Background: WL7 is properly configured to use 2-way SSL, and works fine whenever
its acting as the Server; i.e., I have 2-way SSL working between a Web Browser
and WL7, or between Tomcat and WL7. However, when trying to get 2-way SSL (mutual
authentication) working between a WL7 server acting as a client and another server
such as Tomcat, acting as the server, I get a "Required peer certificates not
supplied by peer" error. The initial ServerHello handshake is fine; the problem
arises when the Tomcat server, for example, then requests WL7 to serve up its
client certificate. It's as if WL7 does not know where to locate its "client"
certificate.
I had the same problem with Tomcat initially, where it would also not know how
to locate its "client" certificte. I resolved the problem by setting the following
system properties:
javax.net.ssl.keyStore=...
javax.net.ssl.keyStorePassword=...
javax.net.ssl.trustStore=...
javax.net.ssl.trustStorePassword=...
Are their analogous system properties I need to set on the WL7 side of things,
as I noticed that WL7 seems to use its own proprietary version of JSSE API's?
How do I configure WL7 to locate its "client" certificate?
Thanks! Your help is greatly appreciated.
-Dan

Weblogic uses Certicom SSL implementation which has classes that conflict with
JSSE classes. As a result opening SSL connection from WLS over JSSE or API like
SOAPConnection that uses JSSE does not work as expected. The javax.net.ssl properties
are not supported and there is no replacement for the default identity keystore
property.
The best workaround I can think of in this case is to pass as the second parameter
to SOAPConnection.call() method a URL instance created with a custom URLStreamHandler
extending the weblogic.net.http.Handler. This handler can override the Handler.openConnection(URL)
method and use the HttpsURLConnection.loadLocalIdentity method to initialize identity
of the returned connection. For example:
public class MyHandler extends weblogic.net.http.Handler {
protected URLConnection openConnection(URL u) throws IOException {
URLConnection c = super.openConnection();
if (c instanceof weblogic.net.http.HttpsURLConnection) {
// initialize ssl identity
((weblogic.net.http.HttpsURLConnection) c).loadLocalIdentity(certChain,
privateKey);
return c;
URL someHTTPSUrlEndpoint = new URL("https", "localhost", 7002, "myfile", new MyHandler());
replyMessage = con.call(someSOAPMessageInstance, someHTTPSUrlEndpoint);
Pavel.
"ddumitru" <[email protected]> wrote:
>
Thanks, Pavel, for replying,
I've been reading and re-reading that page for quite a while now. Unfortunately,
the examples given are for when WL7 is acting as the "server" and not
the "client";
i.e., when some other server, such as Tomcat, WebSphere, or Oracle 9IAS,
reaches
out to the WL7 instance first, or when one WL7 instance talks to another
WL7 instance
via JNDI.
In my case, my WL7 instance needs to initiate a Web Service call; i.e.,
needs
to reach out to another server via a SAAJ (SOAP with Attachments) API
call. My
sending servlet uses the SAAJ (SOAP with attachments) API to make a Web
Service
call to another server, as follows:
SOAPConnectionFactory scf = SOAPConnectionFactory.newInstance();
SOAPConnection con = scf.createConnection();
SOAPMessage replyMessage = con.call( someSOAPMessageInstance, someHTTPSUrlEndpoint
With the SAAJ API, as illustrated above, I don't see a direct way of
configuring
(using URLConnection, SSLContext, SSLSocketFactory, etc.) the SSL connection
prior
to making a call, as suggested in the link you mentioned. Also, the
receiving
server may implement its Web Services using a non-BEA application server
that
may not even use the J2EE platorm. As such, I don't believe I can use
the JNDI
solution provided in that same link.
Again, I was able to make 2-way SSL (Mutual Authentication) connections
between
Tomcat and WL7 instances using the SAAJ API's when Tomcat was the client
initiating
the SAAJ call. In this scenario, Tomcat requested WL7 for its certificate,
WL7
served it up, and Tomcat then verified it. Then, in turn, WL7 asked
Tomcat for
its certificate, Tomcat presented it, and WL7 was able to verify Tomcat's
certificate.
I suppose I was able to make it all work under this scenario because
I was able
to configure Tomcat, which is using native JSSE API's, to locate its
"client"
certificate by setting the following system properties, as mentioned
previously:
javax.net.ssl.keyStore=...
javax.net.ssl.keyStorePassword=...
javax.net.ssl.trustStore=...
javax.net.ssl.trustStorePassword=...
Based upon your feedback, I now understand that WL7 cannot be configured
in a
similar manner because WL7 uses its own version of the JSSE API's. Any
ideas
on what I might try next?
Thanks!
-Dan
"Pavel" <[email protected]> wrote:
WLS SSL API does not support any system properties for SSL identity.
The client's
identity has to be configured via methods of SSL API. The trust configuration
of SSL client running on WL server and using WLS SSL API will be the
same as of
the WL server.
See http://e-docs.bea.com/wls/docs70/security/SSL_client.html#1019570
for more information on this. "Writing Applications that Use SSL" contains
code
examples that use different SSL APIs to connect over two-way SSL.
Pavel.
"ddumitru" <[email protected]> wrote:
Background: WL7 is properly configured to use 2-way SSL, and worksfine
whenever
its acting as the Server; i.e., I have 2-way SSL working between a
Web
Browser
and WL7, or between Tomcat and WL7. However, when trying to get 2-way
SSL (mutual
authentication) working between a WL7 server acting as a client andanother
server
such as Tomcat, acting as the server, I get a "Required peer certificates
not
supplied by peer" error. The initial ServerHello handshake is fine;
the problem
arises when the Tomcat server, for example, then requests WL7 to serve
up its
client certificate. It's as if WL7 does not know where to locate its
"client"
certificate.
I had the same problem with Tomcat initially, where it would also not
know how
to locate its "client" certificte. I resolved the problem by setting
the following
system properties:
javax.net.ssl.keyStore=...
javax.net.ssl.keyStorePassword=...
javax.net.ssl.trustStore=...
javax.net.ssl.trustStorePassword=...
Are their analogous system properties I need to set on the WL7 sideof
things,
as I noticed that WL7 seems to use its own proprietary version of JSSE
API's?
How do I configure WL7 to locate its "client" certificate?
Thanks! Your help is greatly appreciated.
-Dan

AE CS6 won't export MP4. "Some of the required components could not be found."

After Effects CS6 (from Production Premium) running on 64-bit Windows 7 Enterprise SP1.
Processor: Intel Core i7-3930K CPU @ 3.20GHz
AMD Radeon HD 7900 Series video card
64 Gb Corsair Ram (DDR3)
Quicktime 7.7.4 Installed
Currently attempting to export a short (2 second) video based on the predefined "H.264" preset with the only alterations being that I want the VBR 1 Pass to target 3.5Mbs (though I've changed this with no difference in outcome) and I want the video to multiplex as MP4. I immediatley get the error prompt: "Some of the required components could not be found."
*Just tried using the 3GPP multiplexer and received the same error message. If I try to use the MPEG4 format I get an "unknown exception" error.*
I've exported literally hundreds of items as H.264 with a MP4 multiplexer on this machine with current hardware and software. And now...no dice. After Effects boots correctly (or at least it seems that way) though I think it takes a little longer than it used to (not sure if the system cache just needs to be rebuilt).
After Effects CS6 has all available Adobe updates. Quicktime 7.7.4 is also up-to-date. Video Card driver is up-to-date.
What could be going on? I'd prefer to skip re-installing this program. I've had to do this numerous times already with this suite throughout the past 12 months; really getting sick of the down-time during reinstall. Worth noting that I have closed the program, closed all programs, restarted computer multiple times.
I am currently going through my Adobe program files for After Effects. I am specifically looking through the 'Support Files' directory. A couple interesting things: 1. My 'MediaIO->Codecs' directory was last updated on 11/8/2013 (perhaps an AE update??) but each of the files within said directory have a last modified date of late September. Did something get wrongfully deleted in the hypothetical update? 2. In 'Media Core plugins->Common' I again have a last modified date of 11/8/2013, but again each of my files within the common directory were last modified late September. I have many expected .prm files but NO ImporterMPEG4.prm; should I have a MPEG4 specific importer file, or does the MPEG importer file do all of the work. Also, I have no ExporterMP4 (or anything of the MPEG, MPEG2, MPEG4 flavor). Should I have one of these?
Don't know if this last paragraph helps at all but my fingers are crossed.

Thanks Katrina for all your help.
I talked to an Apple tech support person. Actually, my call had to be elevated to the next support level. Joy. You are correct, there are multiple listings of the files in the error report even though there is only one copy.
The support person had me do a few things. Here is what eventually seems to fix things:
1) For the mp3's that DID copy but were listed as not found... Some files were duplicated so deleting the duplicate with the "!" was an easy fix. I found one file that I could search by song name in iTunes but could not find it by song name search on the iPod. Looking at the iPod playlist I found the file listed by the filename (not song name) and the file played fine. Then in iTunes I double clicked on the song name ("!" showing) and selected locate. I then pointed to the location on the NAS. Resync and now the name of the song on the iPod changed from filename to song name. The file was no longer listed in the error report.
2) For the m4a files that didn't sync... the problem songs appeared three times in a search in iTunes. Two of the listings showed the "!" next to the name. I deleted these two for each song that didn't sync and all transferred fine afterward.
Perhaps there is an issue with ID3 tags since I use filenames more than tags in organization. Still, I would think that iTunes would not get so confused or be a little more friendly with its errors, especially considering how long its been around.
Thanks again for your help. Looks like I have a manual way to correct this issue.

Error Message: This type of file is not supported, or the required codec is not installed?

I am trying to get media from my computer, and I only receive this error message :
This type of file is not supported, or the required codec is not installed?
What should I do? I have a window 8 laptop. My video files are from my itouch/ipod. I am using Premiere Elements 7.
I have used this software with success before. HELP would greatly be appreciated!

darlingdarleen
Did both laptop 1 and 2 have QuickTime (latest version or any version) installed on the computers with Premiere Elements 7 when you got this "this type of file......" message?
If you go to the opened Premiere Elements 7 projects involved and look at Share/Personal Computer/QuickTime, do you find that QuickTime Presets are shown and that you find export settings choices under the Advanced Button/Video Tab and Audio Tab?
Look at the file name of the video. Do you see any irregularies in the name of the file, dots and such?
If you record new iPod footage, open a new Premiere Elements project, and import that iPod footage, do you still get the error message? Putting aside, iTouch, what model iPod are these videos coming from?
Thanks.
ATR

What is error message "required codec is not installed"

I installed my Adobe Primier Software on my new computer and when I try to open projects from my old computer I get an error message "This file not supported or the required codec is not loaded"

I'll have to take a look at the project settings, but the sung I was trying to install with my pictures was purchased off itunes.
Now I have another problem with my DVD's I bought and All-In-One Hp computer. It is one of the best. I love it. Here is My problem with burning a dvd. I go though the process on Adobe Premier Elements and everything seems to go fine. The burned DVD plays fine on the computer, but doesn't play on my home DVD player. The home DVD player is a current model from Toshiba and the latest technology. When I put the DVD in the Toshiba player it just keeps trying to load with no success. I did not record in Blue Ray, just used standard format. I tried it several times with the same results. Any ideas?
Thanks,
Jerry

I am trying to authorize my computer and I get an error message: The required directory was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed. Help?

I am trying to authorize my computer and I get an error message: The required directory was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed. Help?

I used Terminal to change the permissions on the folder in question. I followed the instructions in this article:
iTunes: Missing folder or incorrect permissions may prevent authorization
In my case, the folder was there, so I needed the command to change permissions on the folder, not to create one. I was hesitant to use Terminal b/c I know that if I made an error I could wipe out my hard drive or render my computer unusable. So to be SURE I didn't make an error, I carefully copied the command from that page and *pasted* it into Terminal. Also, before I could do anything in Terminal, I had to go change my admin password (it had been a blank password before and that's not acceptable for making changes in Terminal). I was just super careful when entering my password or doing anything else while Terminal was open (making sure I didn't accidently hit the spacebar or another key, etc.) And it fixed the problem right away.
What was confusing for me was that the iTunes error message said to change permissions in the FINDER, which is what I was trying to do. It didn't mention Terminal. What would really be helpful is if Apple included a link to a page like this in their error message.

Billing doc not flown to A/C

Hi,
One billing doc.not flown to A/C,trying to release it manually but showing error -
"Error in account determination: table T030K key 1000 JN7 A2."
Kindly help to resolve this issue.
Harsh

Hi
Kindly maintain the tax code in FTXP and relevant G/L account for the same
Go to FTXP enter the country & tax code after that select the tax accounts and maintain the same as below
KTOPL KTOSL MWSKZ KONTS KONTH
Chart of account Account key tax code G/l account
REgards
Damu
Edited by: Damodhar Reddy Chilukuri on Jan 18, 2010 5:42 AM

This ipod cannot be used because the required software is not installed. Run the Itunes installer to remove Itunes, then install the 64-bit version of Itunes.

I'm not sure if the error message is related but smart friend was using my computer started deleting Quicktime & Safari and told me that they shouldn't be on my computer as they are not windows product & I can't use them on my laptop. With trepidation but acknowledging I don't know any of the stuff they were talking about, I allowed them to raid my laptop thinking it could be for the best. Now I'm not sure if it is related or not but depsite me having the most recent Itunes updates on both my Ipod 4TH GT, I am getting the following message everytime I connect my Ipod to the computer...and the timing would be about right too:
this ipod cannot be used because the required software is not installed. Run the Itunes installer to remove Itunes, then install the 64-bit version of Itunes.
If it helps I am running the 10.7.0.21 on the Sony Vaio & remember checking last week I do have the latest update on the Ipod but it is a different version from the Itunes on the laptop (which may be normal, I wouldn't know) but as I am away from home & Wifi I can't tell u the version on that though.
My problem is I cannot find an apple installer on the laptop to uninstall & I have searched Apple & Google for help and have seen others posts with the same issue but alot of the answers unfortunately I can't follow. I would greatly appreciate it if you can you answer any of these questions for me?
*Will add & remove totally uninstall Itunes so that I can reinstall?
*Will I lose my apps, music & data?
*If the apps, music & data is recoverable, how do I do that?
Sadly I can't find the installer & would love to add my new Mumford & Sons cd to my Ipod collection but don't know how to fix this. I love my Ipod & google but I have spent hours tryign updates, downloads, searches & feedback to Apple. A few months ago I had an Itunes billing problem & there was a webpage where you could email an apple support worker & rhe replied to my credit card problem within a day or 2 but I can't find that help for this problem..I couldn't express my graditude enough if you could help me with this, but thank you.

dorygirl2009 wrote:
I'm not sure if the error message is related but smart friend was using my computer started deleting Quicktime & Safari and told me that they shouldn't be on my computer as they are not windows product & I can't use them on my laptop.
This "smart friend" really sounds like a collosal moron.
Follow the instructions here: http://support.apple.com/kb/HT1925 to remove and reinstall all Apple products on your computer.
Once you get everything working, the next time your "smart friend" wants to touch your computer, tell them firmly NOT A CHANCE IN ****!
None of your data (media, podcasts, apps) will be affected by removing and reinstalling iTunes.

This iphone can not be used because the required software is not installed. Run the itunes installer to remove itunes, then install the 64bit version of itunes

This iphone can not be used because the required software is not installed. Run the itunes installer to remove itunes, then install the 64bit version of itunes
I keep getting the above error everytime I plug in my iphone.
I am not daft, I do have the 64bit version of iTunes installed already. When I installed itunes 10.5 and more recently 10.5.1 I got an error message that rolls back a section of the installation (The updater I think) before finishing off installing iTunes.
After the installation iTunes will work normally apart from when I try to connect a device. At which point I get the title error message and I can not sync my phone.
It's probably down to Itunes not installing properly however no matter what I try I can not sort the problem out. I've tried uninstalling all apple programmes followed by a registry clean, then reinstall. I've tried the same again but in a specific order. I've tried repairing iTunes, repairing the updater etc etc. Nothing seems to work. I'm out of ideas.
Has anybody had this problem? Please can somebody tell me how to fix it!
Getting an iPad this Christmas and if I can't sync that up to my PC I may just have to go over to ANDROID!!!

Is there a way to install this on its own?
Yeah, let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunes64Setup.exe installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunes64Setup.exe, and select "Extract to iTunes64Setup". WinRAR will expand the contents of the file into a folder called "iTunes64Setup".
Go into the folder and doubleclick the AppleMobileDeviceSupport64.msi to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport64.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, does an iTunes install go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

How to solve "this type of file is not supported, or the required codec is not installed"?

Hi all,
I've just started using a new computer with WIndows 8.1 within the last week and have loaded my Adobe Premiere Elements 11.0 software into it.
In trying to view and edit a video I created on my old computer, I got "Media Pending" and "Media Offline" notices as soon as I began. The source files are located on an external drive with a permanent letter designation. I began the process of reconnecting my Project Assets files with the source files this morning, but have now encountered a new roadblock. Each time I try, I get the message "this type of file is not supported, or the required codec is not installed." It offers no information or options other than to click "OK," which is not very helpful.
All the source files are located in one folder on my external drive. I have been able to reconnect the JPEGs and the mp3 source files but not the AVI video files.
Here are three screenshots. The first is the "Media Offline" message, the second is the message I receive when I try to reconnect my Project Assets to the source files and the third is a screenshot of the codecs installed on the new computer.
Here is my new computer information:
Model: Del Inspiron 3847
Intel Core i5-4460
CPU @ 3.20 GHz 3.20 GHz
RAM 8 GB
System type: 64-bit, x64-based processor
I hope someone can guide me. What do I need to do to solve this problem?
Thank you.
Message was edited by: Janie Christensen Ficara

StreetSongs
Thank your for the information supplied.
But, what are the properties of this .avi file that you seek?
Video Compression
Audio Compression
Frame Size
Frame Rate
Interlaced or Progressive
Pixel Aspect Ratio
Right now of prime interest is the video compression that is being wrapped by that AVI wrapper/container.
AVCHD.avi
MotionJPEG.avi
XviD.avi
DviX.avi
other
There are instances were a particular video compression or a particular container/wrapper format is each supported by Premiere Elements, but
not a combo of those particular two. But, in this instance, I suspect this to be a MotionJPEG video codec issue, but your details will
point us to the actual situation, and we will plan troubleshooting strategy from there.
ATR

CO-PA reposting KE26; requiring CO doc not FI document

Similar Messages

Maybe you are looking for