CO PA  - Upload planning files

Hi,
could anybody tell me which is the file layout (which columns in which order???) for the "upload excel" function in CO-PA integrated planning?
Trx KE13N ?
Thks
Veronica

Annual Plan for Controlling

Similar Messages

  • How to upload flat file in planning book

    Hi,
    Can anyone tell me how to upload flat file(e.g xls, csv) in planning book against key figures(e.g forecast) in some characteristics level(e.g brand, sku etc)?
    Is it possible to have screen shots or path to follow?

    Hi
    Yes you can upload the excel files or flat files in APO planning area. APO planning area is made of characteristics and key figures. All the characteristic information is mainly available in Infoobject. You can upload these excel files in infobojects which will than reflect in planning book. Please find the detail information regarding APO BW building blocks.
    http://help.sap.com/bp_scmv250/BBLibrary/documentation/DPL_BB_ConfigGuide_EN_DE.doc
    Please go through the section 2. Setting up APO BW which will tell you all the details steps.
    Please remember to activate the infoobject once you load the data.
    I hope this will help you.
    Thanks
    Amol

  • BI-Integrated Planning: File Upload

    Hi, I have implemented the "BI-Integrated Planning: File Upload" paper and it seems to work fine.
    Whatever "Version" is in the delimitied file gets loaded just fine. (New Version gets created in master data)  So if version 999 is in the file the new version 999 get created with no master data issues.  But, when I try to load a file with a material that doesn't exist in Master Data, I get errors about the material not existing.  We need to have the upload allow new materials..
    I am wondering if it Is the InfoObject Conversion Routine that causes the error, but if that was the case we wouldn't be able to load new materials in our regular loads.
    Why does the file upload app allow you to create a new version, but not a new material?
    Any ideas?

    I found out that a new characteristic value can be created for characteristics with no Master Data Table.
    I.E. 0VERSION can have a new value
    I.E. 0MATERIAL cannot have a new value
    Answer was found in following thread:
    IP input query: mandatory fields and new master data input

  • Issue in Planning file entry creation for materials

    Hi all,
    There are some materials for which there are no planning file entries inspite of having MRP data and valid MRP type.
    The reason (1) could be that those materials might have been created before MRP was activated for that plant. Another reason (2)is that materials created by certain batch SAP programs do not trigger the creation of a planning file entry automatically, the way a MM01 normally does when you create a material. Otherwise when a material is created with MRP data & valid MRP type, the material will be automatically included in the Planning File.
    Please let me know whether my understanding on the above( reason no.1 & 2) is valid or not. Is there any SAP / OSS document / SAP help related to this information on reason (2) that you can share with us? If you could share any link of any such document, it will be really helpful.
    Thanks a lot,
    Regards
    Brijesh

    Dear,
    Reason could be
    System will maintain the Planning File Entry Automatically once MRP is activated for particular Plant (T.Code OMDU).But if Materials are created Before this activation then you have to do manual entry of those Materials in Planning File using T.Code MD20 or using Background job MDBT.
    If you create the materials or upload materials before activation plant for MRP this may be the cause for this.
    Go to OMDU here is tick mark for plant activation for MRP if you activated after material master creation then system will not create planning file entry for these material.
    In my case every thing was maintained than also no planned order generated? Pls put some more fact on this.
    Before running MRP we used to run MDRE. But in the result spool list there is no content
    Create the variant and run it in Back ground
    For this you need to you need to create the variant for planning file entry and its consistence check in OMDU and execute it to avoid such type of issue.
    Hope clear to you.
    Regards,
    R.Brahmankar

  • When I try to upload a file it goes through the correct proceedure, but does not change the remote file i.e.Index.htm

    Hi
    I have an uploading problem to the server. The problem is when I try to upload a file it goes through the correct proceedure,
    but does not change the remote file i.e.Index.htm, or three stages1.htm.
    My Localroot folder is C:\Gods Plan Web\
    The site map layout is C:\Gods Plan Web\Index.htm
    The folder for the remote site is /public_html/
    Should the local root folder mirror the remote site, i.e./public_html/
    if this is so, what should I put into the
    (a) Local Root Folder box?
    (b) site map layout box?
    The FTP is performing well other than changing the intended file.

    You should be uploading only the contents of your local root to the public_html folder (remote root).
    The index.html you use as your site's home page needs to be in your site root. If you look at your Files window in DW, you should have something like the following...
    Site - Whatever you named your site
         index.html
         images
         pages
              page1.html
              page2.html
    If you have any folder between Site - and the index.html page, like...
    Site - Whatever you named your site
         mywebsite
              index.html
    It will upload to the public_html while still in that folder, so to find your page online, you would need to type something like...
    www.mydomain.com/mywebsite
    public_html should NOT appear within your local files and if it existed there, would cause a redundancy if uploaded. You would need to type www.yourdomain.com/public_html to see the uploaded pages.
    If you could post a screen shot of your expanded Files window while connected to the server (just connect and click the Expand button in Files, don't drill down into any of the directories), we may be able to see the issue.

  • Error while uploading plan revenue -CJR2

    Hi All,
    I am facing one issue while uploading Plan revenue for wbs elements using excel method for CJR2 transaction. What i m doing is , in project structure i have 1st , 2nd & 3rd level WBSe,  2nd level WBSe is relevant for billing and revenue planning. Therefore i have marked 2nd level WBSe as a billing element and to restrict revenue plan i have maintained a relevant user status at 1st and 3rd level WBSe. In upload file i am only giving 2nd level WBSe but when i execute i am getting an error that user status XXXX is set on 1st level & 3rd level WBSe which restrict revenue planning. I also removed 'Bottom up planning"  indicator from planning profile.
    My reason  of worry is even though i have not maintained 1st and 2nd level WBSe in upload file then why and how system is checking 1st and 2nd level WBSe .
    Any clue is highly appreciated.
    Thanks.

    Hi Varun,
    In my query i have mentioned that user status is set on 1st & 3nd level WBSE only and i am doing revenue planning on 2nd level WBSE( to this WBSE there is no user status ). And i am mentioning 2nd level WBSE only in upload file but system is checking 1st and 3rd level WBSE and giving error and this is my point of worry. It should not look for 1st and 3rd level WBSE. And i do not want to change the user status at 1st and 3rd level WBSE.
    Thanks

  • BI IP - Upload flat file - "requested resource not found" when typing URL

    Hi,
    we tried to implement the "upload flat file" functionality (blog Marc Bernard). We followed the different steps and included the bug fixes as well. When we want to launch the URL in an internet explorer session we get message "requested resource not found".
    Hereby the URL used:
    http://sapscmbid.vpkgrp.int:50100/sap/bc/webdynpro/sap/zrsplf_file_upload?sap-language=EN&planning_sequence=FILE_SEQ&show_messages=WEXA
    Do you know what we did wrong? We would like to finish this by the end of this week ...
    kind regards
    D

    Hi,
    when we use URL http://sapscmbid.vpkgrp.int:50100/ we see the screens of the portal so I presume this server and port is accurate (we use the same link for the planning modeler and this works fine).
    The SICF service zrsplf_file_upload has been imported and has status active. Should we check other things as well?
    D

  • Planning file Entries

    Hi Friends
    When is a Planning File Entry is Created?? During the creation of Material master?? We have uploaded the material Master and found that there are few materials for which Planning File Entries are not createdu2026.. How can we overcome this??  Do we have to create the planning file entries using MD20??
    Is there any views which are required for Planning file entry Creation?? Like MRP 1 u2013 4 Views should be there for Planning File entry Creations??
    Please get back to me on the above.
    Jade

    Dear,
    All materials assigned with MRP are automatically entered in planning file entry.
    Depends on changes in material planning or in proposal , system will create planning file entry.
    When MRP run system will consider only which materials having entry in above contents of planning file entry.
    If the materials is created before activating planning file for plant, you must generate planning file entry for all material by tcode MDAB.
    T-Code :
    MD20 Create planning file entry
    MD21 Display planning file entry
    MDAB Set up planning file entry in background
    MDRE Check planning file entry
    For the first time (just before Go-live), it is advisable to create the Planning file entries mnually and execute the MRP.. This is to reduce the inconsistencies..
    But, system will automatically Creates the Planning File entry, if the Material is relevnt for planning.
    First time MRP Run with NEUPL will not consider the planning file entries..
    So, after that every thing will be stream lined.
    In rare cases systm may miss the entering the Material details in the Planning file
    Regards,
    R.Brahmankar

  • MRP AREA NETCH indicator missing in planning file entry

    Hi,
    MRP has been activated at MRP area level storage location level and there were no planning file entries for some materials because we were using the LSMW program RMDATIND for uploading the materials and there was no update flag for Planning File entries. Later we have updated the Direct input session with update Flag.
    I already ran the MDAB and MDRE so by the missing planning file entries.
    We are running the background job RMMRP000 for the MRP. There are some materials which are not being planned in the background job. When i run the MRP for the same materials in MD02/MD03, the procurement proposals are being created using MD02/MD03.
    I checked in MD21, we can see the Planning file entries then there no indicator for NETCH.
    What could be the reason?
    Regards,
    Kumar

    hi
    take t code-md20
    flag required field
    regards
    gyana

  • No planning file entry for safety stock

    hello!
    i do not have a planning file entry for safety stock. my material has required safety stock and no quantity on plant stock. therefore MD01 should create a purchase requisition - but is does not. i do not have an entry in the planning file as well.
    any ideas what could be the reason?
    thanks!
    matthias

    Hi,
    - First of all check whether MRP is activated or not for Perticuller Plant.T.code is OMDU.
    - Which MRP type is maintained for that material?
    - In rare cases (Materials uploaded by LSMW using Badi) it is observed that system miss to make the entry in Planing File.So better will be set a Back Ground job to activate Planing file OMD0 or make manual entry using T.code MD20.
    Regards,
    Dhaval

  • Trying to add some security to uploading .DWF files from my application

    My application uses the LDAP authentication scheme, and its working great.
    But my application also provides a link to Floor Plans that are stored on the files system in DWF format.
    The link is on the directory path which is an attribute to the record.
    Part of the directory path is masked because the files on my system are located in the Document Root. (Thats fine).
    But the link can be copied and pasted into any browser without any means of validation or security.
    We like our LDAP authentication scheme, but I need to secure these files.
    I've found something in the Pro Oracle Application Express book that sounds promising, but I don't know how to apply it.
    In Chapter 9, File Storage, and the Standard upload section, I read about the "WWV_FLOW_API.SET_SECURITY_GROUP_ID" procedure. This procedure accepts the numeric value of the Workspace. If I could somehow use this procedure along with a condition for UpLoading the file that might work.
    Can anyone give me some ideas here?
    The example the book gives is this EXEC WWV_FLOW_API.SET_SECURITY_GROUP_ID(99999nnnnnn);
    where (99999nnn..) is the same numeric id as SELECT &WORKSPACE_ID. from dual;
    I appreciaate any ideas!

    bounce

  • Problem in upload flat file into bw-bps using web browser

    Hi All,
    I have follwed the steps as per the how to guide to upload flat file,its seems to be fine but when try to upload by running the URL its giving error "Value of variable Data Slice Global ( ZFIE0ALL ) cannot be determined " and warning "Errors occurred when executing planning function TUPLOAD(EXIT FOR UPLOAD DATA)/T0000000(WEB UPLOAD".
    Since i am new to BW/BPS , also let me know, how test it , when i run file_upload URL directly its giving follwing error.
    SAP Note
         The following error text was processed in the system:
         An exception with the type CX_SY_REF_IS_INITIAL occurred, but was neither      handled locally, nor declared in a RAISING clause
    When i run page1 url and if i file_load url, then its prompt me to see upload function, path for flat file. But when enter path of flat file and press upload function button ts giving error "Value of variable Data Slice Global ( ZFIE0ALL ) cannot be determined " and warning "Errors occurred when executing planning function TUPLOAD(EXIT FOR UPLOAD DATA)/T0000000(WEB UPLOAD".
    FYI..i am using new design HTMLB option in how-to-doc.
    Please help me to resolve this. Thanks in advance.
    Also pls let me know can i debug this application?How ?
    Vishal
    Message was edited by:
            vishal kashyap
    Message was edited by:
            vishal kashyap

    Hi Vishal
    Can u guide me , by what condition the data is selected in XTH_data ( Hashed table ) before the data is written by flat file function module .
    Reply me ASAP ,
    Thanks
    Anup Singh

  • Does iWeb need to upload a file that is already on my iDisk?

    I already have a very large movie file on my iDisk that I had uploaded for a purpose other than including on an iWeb site. I'm wondering if I can now include this movie on a web page created with iWeb without having to upload the large file a second time. Can iWeb "point" to a file already on my iDisk. This is how the old HomePage system worked previously, and it made sense to me. I am happy to let iWeb upload my files usually, but in the case of this particular movie I have already uploaded it. Seems silly if I have to upload it again with iWeb, in which case I would want to remove the copy of the file that is already on my iDisk.
    Anyone familiar with this scenario?

    There isn't any way to do this directly in iWeb... If you dragged the same movie onto several different pages, I'm pretty certain that iWeb would upload separate copies to be included with each page's files. Obviously this is never optimum.
    A couple of different options for you...
    1. Just provide a hyperlink to the original PAGE where the QT movie is displayed. This is probably very obvious and will not work in your grand plan.
    2. Provide an external hyperlink to the original QT movie file. When clicked on, a new blank page would open and the QT movie would play in that browser window. This generally works and is very easy to do, although I know that QuickTime Kirk would have a cow (haha...just kidding...wink...wink...) to hear me recommend it.
    3. Make a dummy QT movie of the same dimensions as your intended QT movie. Maybe use a single black frame or something. Plunk it down on your iWeb page. Then publish. After publishing find the page.js file in the "page_files" folder and replace the references to the dummy QT movie file with the location of your original QT movie. Complex....but I think this should work. Another downside...you'll have to edit the .js file again in the future if you change the page significantly because your edited references will be overwritten.
    Let me know what you think. I'm sure others will chime in as well.

  • Why Won't ICloud let me upload ANY files to Iwork section?

    Ok so like many others, When I try to upload a file to Icloud (A pages File) I ALWAYS get an error "There was a problem uploading a doument. Please try again." No matter how many times I try, I get this error. What also ***** is it won't give me the cog in the upper right hand corner with the options to upload. My only choice is to drag and drop, which gives me the error. I created this account on an IOS5 Device (My friends, because I don't have one, I have a mac but can't enable the ICloud specifically on this mac). I do not plan to use ICloud to transfer between IOS devices and computer, only between computer and computer and store all my misc. pages files there. However, I should still be able to upload my IWord 09' documents, presentations, ect. When I go to the Iwork page, it encourages me to buy the programs, even though I already have them. Please can anyone tell me how to get it to upload my pages and keynote files?

    I have it on my mac, but the one that doesn't let me setup icloud on it. So basically I need to enable the icloud on a computer or device that has pages, then it will let me upload pages anywhere? (thats kind of bull but I guess if it works). The only problem is my mac that is 10.7.5 is a laptop I'm provided with and for some reason the administrators decided to block the use of Icloud on it (The system prefrences not the website). So I guess until I can get my account on a device with Pages or something, Im out of luck. Thanks for you help. You are the only person who actually has ever provided a straightforward answer/support rather than just having teh subject changed like in most discussions.

  • New Upload & Manage Files Metadata Support

    Hello:
    Thanks for the new support for some of the metadata with the UI for the new Upload & Manage Files, which appears limited to the metadata for "name" and "artist".
    Are there plans to support other supported metadata, especially "Comments" which seems a critical area for searching for keywords, etc. and would make it much easier to edit or add this info via the iTunes U UI vs editing it local and re-uploading.

    I second that question - it would be useful to be able to add content to the comments field.

Maybe you are looking for