Co- Product Error while creating a production order
Hi,
While performing the Co-Products Approtionment at the time of creation of Production order..
we are facing a problem regarding cost apportionment I have crated a Source Structure and the cost element is assigned to that Source Structure but still iam facing this issue
kindly help me out.
the error msg is
Debit with cost element 9460404 cannot be settled.
Message no. KD549
Diagnosis
Costs/revenues exist for cost/revenue element 9460404. This cost/revenue element was given source assignment 40 in the source structure (-> settlement rule for sender -> parameters). However, there is no distribution rule with settlement type FUL for this source assignment or the total of the percentages for the rules is less than 100.
Note:
Full settlement settles all the costs and revenues which have occurred up to the settlement period and have not already been settled. In the case of periodic settlement, you can configure the settlement profile so that all the costs occurring in the settlement period are settled, or if an amount less than 100% can be settled.
Procedure
Maintain the distribution rules for source assignment 40 and settlement type FUL or use periodic settlement to settle less than 100%. Change the settlement profile for the sender as necessary.
Change settlement profile
Note:
Cost and revenue elements receive source assignment " " if you have not entered a source structure in the settlement rule parameters.
Hi Krishna Murthy I went through the note but i couldnt recive a big help from that note.
I will explain the step by step process that i have done.
I am attaching the Screen shots of the issue.
1. For co-products I have created a source structure and Sec. Cost Elements were assigned in the source structure.
2. The source structure was assigned in the Material Master for co-products equally distrubuting the amount between 2 materials.
3. When we are trying to create a production order the error was displayed but the costs was getting calculated properly.
4. When I was settling the production order the same error was getting displayed.
I have tried various methods to resolve it.
1. I have created a periodic settlement rule and tried to settle but it didnt work
2. I have assigned the source structure in the settlement profile this also didnt work.
Similar Messages
-
Serial number error while creating the production order
Hello frds,
I am getting the following error while creating the production order.
"Item 000000 requires exactly 100 serial numbers for the asset".
If i give 100 serial numbers in the order, the error is solved. But i do not want to assign 100 serial numbers, i want to assign only 2 numbers.
I have tried using the new serial number profile also, but it is giving same error.
Kindly guide.
Regards,
Narendra BoraDear Narendra
Select the serial number profile and go to serialization procedure and set the ser. usage status 02 - Optional as below.
Procd Procedure description Ser.Usage
PPRL PP order release 02
since the serail number creation is optional for order relase this will allow you to relase with out error and with serail number assigned in partial.
Regards
Soundar -
Error while creating the product group by MC84
Hello Friends,
I am creating the product group by MC84, and in product group field i have given the product group name i.e P2345, and its description i.e product group for waluj, plant i.e cw01 and Base unit i.e KG.Now when i press enter system is throwing the error"The field is defined as the required field;it doesnot contain an entry."Message no.MG144.And with this error system is placing the cursor on product group field.As i have already given product group name than also system is throwing the error.
Though i know the alternative method to create product group by MMO1 and selecting the material type PROD, then also i want to know why system is throwing the error while creating the product group by MC84.
Please guide.Dear,
This message says that you have not entered a mandatory field.Enter proper values for all mandatory fields and then you will not get this error.
Try to create the product group as material of material type"PROD"
Then you go on adding the memebers in SOP Transaction.
In some of the versions of SAP it is the problem.
I have also faced this problem in some versions.
Regards,
R.Brahmankar -
Error while creating the sales order with billing reference
hi alll
i am getting error while creating the sales order with billing reference.The line items are coming in grey.I am not able to change the items as well as the quantity field.Can u guide me
cheers
shalsa007........Dear SAP SD 007
I can confidently tell that an enhancement or an user exit has been applied in your scenario
You have to check that
Normally when creating a sales order with respect or referring billing documents the qty will be in editable mode and it is standard problem
Your people has solved the standard problem by enhancement
Usually OR--LF-PGI----F2 (SAY THE QTY IS 25 UNITS)
Now you are creating returns order with reference to F2 in the return order type Re there is a standard issue that user can edit the qty to 30 from the original 25
To solve this only your people have used userexit
Line items and qty greyed out means definately there is some enhancement or user exit applied
You have to check that
Regards
Raja -
Error While creating a Product Group
Dear All;
When running MRP, we would like to run it for specific materials only.
To do so, we need to group the materials in product groups.
While creating a product Group using T.code MC84, i get an error message
"The field is defined as a required field; it does not contain an entry
Message no. MG144"
Kindly advise me on how to resolve this.
Regards;
Richard.Hi,
Refer below OSS note:
Note 621753 - MC84: Error message when creating product group & it's related ones.
Regards,
Ram -
Error while creating a product group--Batch input error 9
Hi,
While creating a product group in T-code MC84, getting the error message" Product group can not be created (Batch input error 9)". Would appreciate providing yr help to resolve above issue.
Thks,
NileshHi Neel,
As ponited by you, the material type "PROD" is realted with creation of product group.I am able to resolve the error, "actually the work schedulling & MRP views were not activated for "PROD" resulting in the above error.
Thks for yr help.
Regards,
Nilesh -
Error while creating a process order
Dear Guru's
While creating a process order ,i am facing an error.
"Unable to create batch. Storage location BPSS is invalid for material 112100050
Message no. 40116".
How to assign specific storage loaction to that particular material.I have assigned in material master "work scheduling tab",But it was throwing an error while doing process order.Pls help me to solve this problem.
Thanks in advance,
Rgds,
cherukuriHi Cherukuri
Are u using special procurement key "80"? It seems that storage location is not mentioned for the header material in the production plant.
Maintain this using T Code MMSC. It will solve ur issue
Rgds -
Error while creating a Planned Order
Hi SAP Experts,
I have an error encountered while creating a Planned Order which is "Mode linkage problem with mode number".
Diagnosis:
An application program called an LCA routine and the following error occurred:
An order has at least one condition with mode linkage with the same mode number. The activities of this condition must have compatible modes. The modes are compatible when each mode of one activity has a mode for the other activity with the same mode number. The first activity that violates the condition is given in the return code table in ABAP.
Please enlighthen me what is this error and what should be done to this error.
Thanks in advance,
RaymondCheck the PPM or PDS being used in the Planned Order.
Most likely you have a Setup Activity followed by Produce Activity. However the Mode (i.e. Resource) used in the two activities are different. The same Mode needs to be used both in Setup and corresponding Produce activity.
Hope this helps,
somnath -
Error while creating a new order on deployed cartridge
hello all
I have deployed "bb_ocm_demo" sample cartridge on the weblogic.
but while creating a new order, i am getting error as below.
An OMS Exception has been thrown. Reason: com.mslv.oms.OMSException: (Wrapped) com.mslv.oms.handler.order.cache.c
com.mslv.oms.OMSException: (Wrapped) com.mslv.oms.handler.order.cache.c
at com.mslv.oms.jsp.processor.RequestProcessorSupport.processRequest(Unknown Source)
at com.mslv.oms.jsp.processor.RequestProcessorSupport.processRequest(Unknown Source)
at com.mslv.oms.jsp.processor.RequestProcessorSupport.a(Unknown Source)
at com.mslv.oms.jsp.processor.RequestProcessorSupport.a(Unknown Source)
at com.mslv.oms.jsp.processor.CreateNewOrderProcessor.processRequest(Unknown Source)
at com.mslv.oms.jsp.controller.RequestController.a(Unknown Source)
at com.mslv.oms.jsp.controller.RequestController.processRequest(Unknown Source)
at com.mslv.oms.jsp.controller.MainServlet.a(Unknown Source)
at com.mslv.oms.jsp.controller.MainServlet.doProcess(Unknown Source)
at com.mslv.oms.jsp.controller.MainServlet.doPost(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:821)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
at weblogic.work.ExecuteRequestAdapter.execute(ExecuteRequestAdapter.java:22)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
Caused By: (Wrapped) java.io.NotSerializableException: com.mslv.oms.handler.order.cache.c
at com.tangosol.util.ExternalizableHelper.toBinary(ExternalizableHelper.java:215)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.partitionedService.PartitionedCache$ConverterValueToBinary.convert(PartitionedCache.CDB:3)
at com.tangosol.util.ConverterCollections$ConverterMap.put(ConverterCollections.java:1674)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.partitionedService.PartitionedCache$ViewMap.put(PartitionedCache.CDB:1)
at com.tangosol.coherence.component.util.SafeNamedCache.put(SafeNamedCache.CDB:1)
at com.mslv.oms.handler.order.cache.AbstractOrderCacheManager.a(Unknown Source)
at com.mslv.oms.handler.order.cache.AbstractOrderCacheManager.a(Unknown Source)
at com.mslv.oms.handler.order.cache.AbstractOrderCacheManager.a(Unknown Source)
at com.mslv.oms.handler.order.cache.AbstractOrderCacheManager.a(Unknown Source)
at com.mslv.oms.handler.order.cache.AbstractOrderCacheManager.getOrderHistoryCacheNode(Unknown Source)
at com.mslv.oms.handler.order.cache.AbstractOrderCacheManager.getOrderHistoryCacheNode(Unknown Source)
at com.mslv.oms.handler.order.cache.AbstractOrderCacheManager.checkMaxInstancesExceeded(Unknown Source)
at com.mslv.oms.handler.order.f.a(Unknown Source)
at com.mslv.oms.handler.createorder.CreateOrderHandlerEJB.process(Unknown Source)
at com.mslv.oms.handler.a.processRequest(Unknown Source)
at com.mslv.oms.jsp.processor.RequestProcessorSupport.a(Unknown Source)
at com.mslv.oms.jsp.processor.RequestProcessorSupport.processRequest(Unknown Source)
at com.mslv.oms.jsp.processor.RequestProcessorSupport.processRequest(Unknown Source)
at com.mslv.oms.jsp.processor.RequestProcessorSupport.a(Unknown Source)
at com.mslv.oms.jsp.processor.RequestProcessorSupport.a(Unknown Source)
at com.mslv.oms.jsp.processor.CreateNewOrderProcessor.processRequest(Unknown Source)
at com.mslv.oms.jsp.controller.RequestController.a(Unknown Source)
at com.mslv.oms.jsp.controller.RequestController.processRequest(Unknown Source)
at com.mslv.oms.jsp.controller.MainServlet.a(Unknown Source)
at com.mslv.oms.jsp.controller.MainServlet.doProcess(Unknown Source)
at com.mslv.oms.jsp.controller.MainServlet.doPost(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:821)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
at weblogic.work.ExecuteRequestAdapter.execute(ExecuteRequestAdapter.java:22)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
Caused By: java.io.NotSerializableException: com.mslv.oms.handler.order.cache.c
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1164)
at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:330)
at com.tangosol.util.ExternalizableHelper.writeSerializable(ExternalizableHelper.java:2253)
at com.tangosol.util.ExternalizableHelper.writeObjectInternal(ExternalizableHelper.java:2697)
at com.tangosol.util.ExternalizableHelper.serializeInternal(ExternalizableHelper.java:2601)
at com.tangosol.util.ExternalizableHelper.toBinary(ExternalizableHelper.java:211)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.partitionedService.PartitionedCache$ConverterValueToBinary.convert(PartitionedCache.CDB:3)
at com.tangosol.util.ConverterCollections$ConverterMap.put(ConverterCollections.java:1674)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.partitionedService.PartitionedCache$ViewMap.put(PartitionedCache.CDB:1)
at com.tangosol.coherence.component.util.SafeNamedCache.put(SafeNamedCache.CDB:1)
at com.mslv.oms.handler.order.cache.AbstractOrderCacheManager.a(Unknown Source)
at com.mslv.oms.handler.order.cache.AbstractOrderCacheManager.a(Unknown Source)
at com.mslv.oms.handler.order.cache.AbstractOrderCacheManager.a(Unknown Source)
at com.mslv.oms.handler.order.cache.AbstractOrderCacheManager.a(Unknown Source)
at com.mslv.oms.handler.order.cache.AbstractOrderCacheManager.getOrderHistoryCacheNode(Unknown Source)
at com.mslv.oms.handler.order.cache.AbstractOrderCacheManager.getOrderHistoryCacheNode(Unknown Source)
at com.mslv.oms.handler.order.cache.AbstractOrderCacheManager.checkMaxInstancesExceeded(Unknown Source)
at com.mslv.oms.handler.order.f.a(Unknown Source)
at com.mslv.oms.handler.createorder.CreateOrderHandlerEJB.process(Unknown Source)
at com.mslv.oms.handler.a.processRequest(Unknown Source)
at com.mslv.oms.jsp.processor.RequestProcessorSupport.a(Unknown Source)
at com.mslv.oms.jsp.processor.RequestProcessorSupport.processRequest(Unknown Source)
at com.mslv.oms.jsp.processor.RequestProcessorSupport.processRequest(Unknown Source)
at com.mslv.oms.jsp.processor.RequestProcessorSupport.a(Unknown Source)
at com.mslv.oms.jsp.processor.RequestProcessorSupport.a(Unknown Source)
at com.mslv.oms.jsp.processor.CreateNewOrderProcessor.processRequest(Unknown Source)
at com.mslv.oms.jsp.controller.RequestController.a(Unknown Source)
at com.mslv.oms.jsp.controller.RequestController.processRequest(Unknown Source)
at com.mslv.oms.jsp.controller.MainServlet.a(Unknown Source)
at com.mslv.oms.jsp.controller.MainServlet.doProcess(Unknown Source)
at com.mslv.oms.jsp.controller.MainServlet.doPost(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:821)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
at weblogic.work.ExecuteRequestAdapter.execute(ExecuteRequestAdapter.java:22)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
please provide a solution or cause.It seems like a problem with the Coherence cache configuration for your installation.
Is your installation clustered?
Is the problem specific to this cartridge (i.e. do orders from other cartridges work well in this environment)?
Suggest you log a problem with Oracle Support and/or try the problem in a different environment.
Regards,
Brian. -
Error while creating manual planned order in apo
Dear expert
While I am creating manual planned order i am getting error as message /sapapo/rrp251
Every thing is correct BOM and PV's no error after consistency check and it getting succesfully transffered to APO and it is also visible in APO
But while creating manual planned orders planned order are not getting generated I am using BLock planning with PPDS
Please help How to resolve it
Regards
VirenderHi
The error message /SAPAPO/RRP251 - Error occurred while creating order means While creating an order, the system encountered problems, such as, for example, no available components or components that are available late, orders that could not be scheduled, and so on.
I think system attempted to solve the availability problems by using alternative procurement options. This was not successful. The order could not be created. Check the exceptional situations in the planning protocol, under Goto -> Planning log, and deal with the causes of the exceptional situations if this is possible or necessary.
Thanks
Amol -
Error while creating a Purchase Order
Hi Friends,
I am new to SAP MM. I am getting a problem while creating a purchase order. I created Purchase Info Record, Source List, but while creating Purchase Order, price is not picking from the purchase order. I am getting an error i.e. Net Value must be greater than 0. I checked all the settings, but getting same error.
Could you please solve thisHi,
Give some price at the item level for the item in the PO.
And check the Pricing procedure in PO
Hope it helps you.
Thanks. -
Material Listing Error while creating the sales order
Hi Guru's
I have mantained a material in the lisitng for A002 combiantion for SO/DC/Pric. ref. material
While creating the sales order is throwing an error as material is not listed so the transaction is not possible.
I have done the basic invetingation on the folowing aspects
1)checking the material in the listing
2)Validity periods
3)Material not blcoked
4)Mateial is extened for the respective sales org
Kindly help ASAP.
Thanks & Regards
TarakaramDear SAP SD 007
I can confidently tell that an enhancement or an user exit has been applied in your scenario
You have to check that
Normally when creating a sales order with respect or referring billing documents the qty will be in editable mode and it is standard problem
Your people has solved the standard problem by enhancement
Usually OR--LF-PGI----F2 (SAY THE QTY IS 25 UNITS)
Now you are creating returns order with reference to F2 in the return order type Re there is a standard issue that user can edit the qty to 30 from the original 25
To solve this only your people have used userexit
Line items and qty greyed out means definately there is some enhancement or user exit applied
You have to check that
Regards
Raja -
Product allocation error while creating a sales order
Hi Gurus,
My client is using the availability check against product allocation functionality in sales order.while I am creating the sales order and entering the material system is throwing the error message product allocation XXX is invalid,after pressing the enter button system has thrown another error "incorrect index structure for table XMVERF_POS/000010" and unable to save the order.
I have checked the material master and the product allocation is assigned in basic data 1 view,I have also checked the IMG settings it has maintained and assigned to infostructure.Please let me know is there any config settings are missing related to product allocation.
Regards,
hari challa.Please check if storage location is populated for the material. Also may be this material is a non-stock material and not relevant for storage location check.. If you have any non-stock items in your order and if you are populating the storage location in the order automatically, then this happens. Please check your code and bypass the check for non stock items.
Hope this helps
Regards
Sai -
Error while creating a production order
Dear PP gurus
I am trying to create a production order of a material through CO01 , I am getting a error 05.05.2016 date comes after end of valid factory calendar. (Please correct
Although for all other material , no error is coming.
My factory calender is till 2015, but i am not able to understand why and how it is capturing the above date.
please help me how to correct it?
Thanks in advance
RegardsDear Aadi,
When your in operations screen
Extras > Scheduling > Schedule > operation overview = operation segments > Click on Gang chat icon
it should show you the days for ur base qty
then click on scheduling results then click on update material master & save
then Go to CA96
input plant
then mark a tick for ur material & click on update material master icon
then check in material master work scheduling view
Regards
Madhu -
Error while creating Partner Product Ranges
HI All,
I am working on Mobile Sales For handhelds module. I have created PPR types and now creating three PPRs:
ZHH_USERS PPR for Users
ZHH_Accounts PPR for accounts
ZHH_Products PPr for products
While creating the PPR (crmm_ppr transaction) , what is the Item tab? what values need to be fillled in the fields: Item Selection and ID/ Description? Right now I do not have any values in the drop down menu. Where and what do I need to configure? What is the purpose of this configuration?
I am gettign an error : field 'PROCESS_QTY_UNIT' is not defined for PPR type 'PRP_BUPA_I' / 'ZHHU'/RefType1'!
Please explain the meaning of this error.
Thank You
Rucha AtreHave you checked your config settings.
Search for "Permissible Partner Roles per Account Group" in SPRO
Make sure the vendor account that you are creating is using an account group that has your new partner in it.
Maybe you are looking for
-
Use prefix when a default namespace
I'm trying to use the SimpleDateFormat.format() function in the following way but it obviously doesn't work. Is there way to do this? <% SimpleDateFormat formatter = new SimpleDateFormat("MMM-dd-yyyy", Locale.CANADA); %> <td>${formatter.format(client
-
Location Appliance not detecting elements after upgrade
Hi Our loacation appliance had version 2.1.42.0. After upgrading it to version 3.1.36 there are no clients been discovered. I must admit we don't have read-write access to the WLAN Controller 4400, and read somehwere that ntp plays a big role from Ap
-
Get text selection and properties
Hi All, I need to get the text selection in my active document so that I can access the properties of selected text like paragraphs, font styles, colors etc. I wrote the following script to get text selection, var objDoc = app.activeDocument; var obj
-
Final cut is crashing, don't know why
I'm running FCP 5.1.4, over the last 2 weeks the program seems to stop for no reason, no error code, nothing. The time line freezes up and the cursor just spins and spins. I've deleted the preferences several times and it doesn't seem to make a diffe
-
Just got my Razr Maxx My yahoo email is set up and I get emails and can send from my phone. But when I delete files from my email account on my computer, they still show up on my phone. I deleted the account on my phone and reinstalled my email. The