CO transaction and entries in the table

Hi,
I want to delete a record in KP26 and I am getting an error "costs already posted on this cost center/activity type combination.
After investiging I found that there are entries in tables COKA, CSSL and COSSA. So, how can get rid of these entries in these table and delete the activity type planning record for the cost center in KP26
Thanks,
Ravi.

Once you updated with a plan data, it is hard to delete. You may be better off creating a new activity type.
Or else look at options of KP90 or KP91. This could delete entire planning data.

Similar Messages

"No entry in the table T589A for P" in PPOME's custom Tab

Hello,
requisites: Add one custom Tab to transaction PPOME relative to Position (Object type S)
problem:"No entry in the table T589A for P" when entering the transaction PPOME, and choose my new added Tab.
I get this error message "No entry in the table T589A for P" when entering the transaction PPOME, and choose my new added Tab.
The thing is, if I comment the line "MODULE BEFORE_OUTPUT" in subscreen 7000 of the infotype (the tab is infotype specific) this error disappear. But then the data entered in the tab, which should be relative to one position (type S), is now displayed for all positions. When leaving the transaction, and entering again, in the same tab, the data has disappeared.
I think I should not comment this: "MODULE BEFORE_OUTPUT"
Why is this error being raised, and what must I do do stop it?
Thank you.

Hi,
The table T589A is a configuration table pertaining to the pf status of the infotype. I changed the pf status of the infotype i.e. added my own buttons on application tool bar. May be cos of that it is giving error. Not sure.......

CUA: Wrong entries in the table USZBVSYS

Hi All,
While searching a particular user access to the child systems via SUIM - > Users by system, the report given output that the user have access to so and so system. Whereas that user already deleted and there is no user account in CUA and the respective child system.
When i search in the table USZBVSYS, that user having a entry to that child system with status S.
May be due to some old IDOC get processed and made an entry in this table but physical the changes were not made either in CUA or in child system.
Now my concern is how to delete such type of entries in the table USZBVSYS?
SAP recommended not to use the report RSUSR_CUA_CLEANUP_USZBVSYS and i think it can be resolve only by manually method to create and delete.
Kindly let me know you opinion pls.

Hi,
RSUSR_CUA_CLEANUP_USZBVSYS cannot work in this case, as you have 'S'-entries for the user section in uszbvsys. The report will clean up only entries with D,A or X entry for the user entry.
So there seems to be no automated standard report for your query.
I suggest to collect the user-IDs you need to remove, copy them into SU10, recreate them for the required systems and delete them
afterwards again.
Make sure, that nobody processes cua-idocs manually in any of your systems of the cua. Only use scul.
b.rgds, Bernhard

Delete any entry in the table before adding an entry?

Hello ABAP Experts,
I have the data in the work area. I can modify / update / insert to the table.
How to write the ABAP code for this situation.
1) to delete any entries in the table
2) update this entry
so finally always there would be only one entry.
Suggestions appreciated.
Thanks,
BWer

Hi,
Delete the entries of table by this stmt.
DELETE FROM (dbtabname).
Then insert the values from workarea
INSERT INTO dbtab VALUES <work_area>.
And u can upadte the entry with values of workarea by this stmr.
UPDATE (dbtabname) FROM wa.
Dont use MODIFY. It will add a new record if its a new entry.
Rgds,
Prakash

How to find latest entry in the table according to time

how to find latest entry in the table according to the time
is there any function module to do so
\[removed by moderator\]
Regards
Shashi
Edited by: Jan Stallkamp on Aug 25, 2008 4:39 PM

Hi,
If you want to read the entry from an internal table,
sort the internal table in the descending order by the time and
delete adjacent duplicates by comparing the fields other than time and the internal table will have the latest record.
Suggestion: instead of only time try to have one more field called date with the time combination
Regards,
Ramesh

Problem with the XI-Audit log entries in the table "XI_AF_MSG_AUDIT"

Hi,
I have an async-szenarios for PO:
We send Idoc's from SAP ERP to a WebService via SOAP. And we take Ack's. We use Integrationsprocess with deadline block to catche the errors after the retrying (three times) and to send they via e-mail.
Our problem is, the number of the audit logs in the table "XI_AF_MSG_AUDIT":
In the RTW only we see one audit log (with three retries) in an error case. But in the table XI_AF_MSG_AUDIT there are about 76 entries for the same audit log in the error case and about 20 entries in the case of the succuessfull processing.
This number of the entries in the table causes problem with the size of the redo log file and delete job of cours the large size of the table and therefore problem on the data base. The table can not be controlled. The delete job can not run and cancels every time due this redo log problems
What can cause that?
How can it be prevented, that so much entries are not be made in the table "XI_AF_MSG_AUDIT".
Best regards
Gueltekin

Hi Gueltekin,
I am only aware of the general property auditLogEnabled of J2EE Engine Service SAP XI AF Core, which controls in general (default = true) that entries in the AF Message Audit log are written at all.
(see [http://help.sap.com/saphelp_nw70/helpdata/en/5c/22ee41c334c717e10000000a155106/frameset.htm|http://help.sap.com/saphelp_nw70/helpdata/en/5c/22ee41c334c717e10000000a155106/frameset.htm])
I assume that your scenarios in the error case is sending up to three messages and for each message the number of audit log infos are created. You might want to check the detailed entries in the log and see from where they are comming, you might use customer modules etc. as well.
Best regards,
Silvia

Transporting the entries of the table TSTCT

Dear All,
Is there a way to transport the entries of the table TSTCT.
I've tried the procedure specified in the below link, but it is not working for the T* tables.
<link to blocked site removed by moderator>
Please suggest if there is a way.
Thanks,
Naveen
Edited by: Thomas Zloch on Feb 6, 2012

HI ,
Check this [Thread|transport system objects i.e. contents of table t100 from one system to ano; , in that they have tried to transport T001 , And replies have few links check that too , will help you to transporting the entries of the table TSTCT.
Regards,
Saravana.S

Multiple entries in the table cabn

Hello,
Can Anyone tell me how is it possible to have multiple entries of the same "atnam" field in the table CABN.
It has something to do with changing number.
Because I used a wrong select-instruction e.g.
select atnam in charact where .... IN ....
So, I shoud used
select DISTINCT atnam in charact where .... IN ....
So, I'm gone need to try to put multiple entries in the table to check, if it's working well.
Thanks a lot.
Best Regards,
Kais

If I understand your Q - you mean there are two ATINN for the same ATNAM in your CABN table?
I dont think that's possible. If you check CT04 and try to create a new characteristic with same name as an existing one - it will give you a warning and prevent creation.
Since you say it's a standard characteristic - please mention the characteristic name (ATNAM)?

PT60 report err 'No entry in the table T555Z'

Dear All,
I tried to run PT61, but I'm getting the error 'No entry in the table T555Z'.
But it's negative time management and in IT0007 I have marked the time status 09.
Regards
Thomas

This error is caused because you do not have the entries in T555z under the PSG for Time recording (What ever has been for for this employee)
If you do not need this, you can comment out TIMTP function in the schema and then you should not get the error...

Is there any system table available to check no. of entries in the table?.

Hi
Is there any system table available to check the no of entries in the table.
Note : the table may be whether SAP table or Z-table.(All tables)
Regards
Raja.

Hi Raja,
I don't think so. Instead, try to perform
SELECT count(*) FROM dbtab.
...to get the number of records of the table dbtab.
I hope this helps. Kind regards,
Alvaro

Error: No entry/entries in the table (WCCI)

Hello friends
I am trying to implement WCM to my client
when trying to change WCD i am getting the following error
No entry/entries in the table (WCCI)
    Message no. I4702    &
Error when executing function module (WCFC_PRINT_FORMAT_GET)
     Message no. I4804
Procedure
     Contact SAP.
i am not able to resolve the issue. Please help me in this regard
venkat

I have attached the screen shot.
Regards,
Amar

Removing entries in the table

Hi,
I need to delete entries in the table ,those may be anywhere between 1 to several thousand. If I want to delete for every hundred records how could it be coded.
Thanks,
Kranthi.

Here is a sample program which shows how to delete from a database table 100 records at a time.
report zrich_0001.
data: itest type table of ztest with header line.
data: itest2 type table of ztest with header line.
data: index type i.
* Get all the records that you want to delete
clear itest. refresh itest.
select * from ztest
 into corresponding fields of table itest
 where mtart = 'ZNBW'.
* Loop untill the first itab is empty, move 100 records * at a time into the second itab, then delete from that
* second itab.
while not itest[] is initial.
clear index.
loop at itest.
 index = index + 1.
 check index <= 100.
 move-corresponding itest to itest2.
 append itest2.
 delete itest.
endloop.
delete ztest from table itest2.
endwhile.
Regards,
Rich Heilman

Error message 'No entry in the table T589A for P 2'

Hi all,
I am updating the field of an infotype using the function module 'HR_INFOTYPE_OPERATION'. But the function module is not updating the field. Instead the return key of the function module has the message
'No entry in the table T589A for P2'. The function module is called as follows:
CALL FUNCTION 'HR_INFOTYPE_OPERATION'
EXPORTING
    infty                  = '9900'
    number                 = wf_pernr
    SUBTYPE                = P9900-SUBTY
OBJECTID               =
LOCKINDICATOR          =
    VALIDITYEND            = P9900-ENDDA
    VALIDITYBEGIN          = P9900-BEGDA
RECORDNUMBER           =
    record                 = p9900
    operation              = 'MOD'
TCLAS                  = 'A'
   DIALOG_MODE            = '0'
   NOCOMMIT               =
VIEW_IDENTIFIER        =
SECONDARY_RECORD       =
IMPORTING
   RETURN                 = wf_return
   KEY                    = wf_key
Please suggest.
regrds,
madhu

Hi,
The table T589A is a configuration table pertaining to the pf status of the infotype. I changed the pf status of the infotype i.e. added my own buttons on application tool bar. May be cos of that it is giving error. Not sure.......

How to find block free space and PCTUSED FOR THE TABLE

HI all,
Due to performance issues for my database , my management ask me to reset the PCTUSED and PCTFREE values , and my doubt is
1)How to find the current PCTUSED and PCTFREE values.
2)How to find block free space and PCTUSED FOR THE TABLE.
Please help me out regarding this.
Regards,
Vamsi.

1)version is 10.2.0.4
2)output of query
tablespace extent_management allocation_type segment_space_management
SYSTEM     LOCAL     SYSTEM     MANUAL
UNDOTBS1     LOCAL     SYSTEM     MANUAL
SYSAUX     LOCAL     SYSTEM     AUTO
TEMP     LOCAL     UNIFORM     MANUAL
USERS     LOCAL     SYSTEM     AUTO
UNDOTBS2     LOCAL     SYSTEM     MANUAL
INS     LOCAL     SYSTEM     AUTO
CONFTBS     LOCAL     SYSTEM     AUTO
REINS     LOCAL     SYSTEM     AUTO
ANALYST     LOCAL     SYSTEM     AUTO
BI     LOCAL     SYSTEM     AUTO
INTRFC     LOCAL     SYSTEM     AUTO
COGNOS     LOCAL     SYSTEM     AUTO
TS_INDX     LOCAL     SYSTEM     AUTO
TS_CHOLAWEB     LOCAL     SYSTEM     AUTO
TS_DASBOARD     LOCAL     SYSTEM     AUTO

Who maintained entries in the table

Hi,
I want to find out who maintained entries in the SAP table B006 and who all has authorization for the same.
Also it would be great if could help me to find a place in SAP where I can find the documentation realted to the table.

Check in SCU3 transaction.

CO transaction and entries in the table

Similar Messages

Maybe you are looking for