CO_TXT_OUTBINDING_NOT_FOUND
I need your help on Idoc-to-file scenario using Business Service with Party. My Problem is that the Receiver Interface and Receiver Namespace in SXMB_MONI appear same as that of senders and the message goes into the error condition "CO_TXT_OUTBINDING_NOT_FOUND" During technical routing.
No receiver agreement found for sender >> another error in SXMB_MONI
Can you help me, with what needs to be entered in header mapping of received agreement and whether I need to specify anything in Identifiers tab of my Receiver communication channels.
No receiver agreement found
Other than a valid Receiver service, MI and CC I dont think you need to add anything special for a normal flow
http://help.sap.com/saphelp_nwpi71/helpdata/EN/56/02e63f48e58f15e10000000a155106/content.htm
Just confirm whether the Receiver Business Service, IN Async MI, Receiver File CC are existing and are in actiavted state.
Similar Messages
-
CO_TXT_OUTBINDING_NOT_FOUND and No receiver agreement found for Sender
Hi,
I had imported an RFC in to two different SWCV. In ID I'm able to see the RFC interface listed under one of the business systems but not in the other. Please help me out with this.
When i tested the scenario i got this error.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Technical Routing
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="OUTBINDING">CO_TXT_OUTBINDING_NOT_FOUND</SAP:Code>
<SAP:P1>-WB_APDRP_DEV_ISU_200</SAP:P1>
<SAP:P2>-WB_APDRP_DEV_CCC,urn:sap-com:document:sap:rfc:functions.ZPI_CONSUMER_PAYMENT_BILL_DATA</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No receiver agreement found for sender -WB_APDRP_DEV_ISU_200 to receiver -WB_APDRP_DEV_CCC,urn:sap-com:document:sap:rfc:functions.ZPI_CONSUMER_PAYMENT_BILL_DATA</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I cleared the cache using SXI_CACHE and http://Server Name:Port/CPACache/refresh?mode=full and still got this error. Can someone explain me about this..
Regards
SattHi ,
This error generally Comes when aggrements are Not There in ID.
1. Check if all the Objects in ID are activated.
2. First test your Configuration Objects IN ID Only ( Tools - test Configuration )
if this gets Successful , Please tell...
Regards
Prabhat Sharma. -
OUTBINDING.CO_TXT_OUTBINDING_NOT_FOUND
Getting no receiver agreement found for sender in the inbound message payload?
Anybody know what this issue is?Here is what is in the payload:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Technical Routing
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="OUTBINDING">CO_TXT_OUTBINDING_NOT_FOUND</SAP:Code>
<SAP:P1>-Wawa_FileSystem_QAS</SAP:P1>
<SAP:P2>-QA5_300,urn:sap-com:document:sap:idoc:messages.INVOIC.INVOIC02</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No receiver agreement found for sender -Wawa_FileSystem_QAS to receiver -QA5_300,urn:sap-com:document:sap:idoc:messages.INVOIC.INVOIC02</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error> -
CO_TXT_OUTBINDING_NOT_FOUND error
Hi all,
I am working on IDoc to file scenario involving extended RCVR determination and mutlimapping....
while testing i am getting CO_TXT_OUTBINDING_NOT_FOUND this error in sxmb_moni..
i checked in SDN .....and the error is abt receiver agreements and receiver determination but i made it sure that every object is activated and cahce is also OK....
but still iam getting this error...plz help me out...Hi Kiran !
Check that you have not created any message interface for the IDOC definition, only create it for the file.
Regards.
Matias.
ps: please award point if helpful. -
Javamapping and CO_TXT_OUTBINDING_NOT_FOUND
Hi Guys,
I`ve been doing javamapping and I`m facing some troubles:
- Test of this javamapping is all right. No errors!
- sxmb_moni = ERROR = CO_TXT_OUTBINDING_NOT_FOUND (Technical Routing)
(no outbound binding found. No standard agreement found)
I have created again and again the receiver agreement. But didn't work.
Any tip? Any Trick?
Regards,Hi,
you need to create a receiver agreement to output your target file.....then activate it......then on again sending source file, you will get your output target file....
if not pls have a look at the below links
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
thanks,
Madhu -
CO_TXT_OUTBINDING_NOT_FOUND error the Acknowledgement of the messgae
For the IDOC to JMS scenario on Production the Acknowledgement of the messgae throws an Error CO_TXT_OUTBINDING_NOT_FOUND .
Checks done
1.CPA full refreshed
2.Cross checked ID objects all fine
And it works fine at Development
Kindly help in this regard to avoid this errorHi,
I am getting an acknowledgement in the same message succefully posted IDoc to the JMS ques..
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Technical Routing of Response
-->
- <SAP:Error SOAP:mustUnderstand="" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="OUTBINDING">CO_TXT_OUTBINDING_NOT_FOUND</SAP:Code>
<SAP:P1>,LRP_MQ_IM</SAP:P1>
<SAP:P2>,LR_PRD_LRP010,http:///IMVendor,MI_LR_IMVENDOR</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>No receiver agreement found for sender ,LRP_MQ_IM to receiver ,LR_PRD_LRP010,http:///IMVendor,MI_LR_IMVENDOR</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error> -
Hi Gurus,
I am doing a FILE TO IDOC scenario for taking Material Master data from the MDM system and posting the IDOC into the R/3 system..
The entry is there in MONI with the chequred flag but there is no IDOC in we02 of the R/3 system.
Also , i pasted the payload from teh MONI and checked in the mapping and the test was shown to be successful.
Can Anyone please tell me what can be the cause and its probable solution?
Thanks in advance,
Shweta.(1) Error Category - CO_TXT_OUTBINDING_NOT_FOUND
The problem is in Technical routing.
Check whether the receiver determination and interface determination objects are active in change lists tab. If they are not active, activate the objects.
Also check the if the receiver determination and interface determination objects are referenced to the same namespace or not. Sender and receiver interface objects should always refer to the same Namespace.
(2) Error Scenario - ATTRIBUTE_IDOC_METADATA
Check the receiver communication channel (Created using IDOC adapter). In this communication channel check if the two mandatory parameters are passed correctly.
Following is further info on those two mandatory parameters.
(i)Check if the RFC destination which is created in XI to connect the target SAP R/3 system is working fine.
(ii)Check if the port that has been created in XI is in the form SAP<SID of R/3 system>. If not, create in the form of SAP<SID of R/3 system>. To this port, specify the above RFC Destination.
(3) Error Scenario - IDOC not yet created in target SAP R/3 system.
Go to R/3 system and check at Tcode WE05 if the IDOC has been created successfully. If error is u2018"Partner profile not configured" check point 9.
Suppose IDOC did not get created at R/3 end and all the pipeline steps were successful in SXMB_MONI, then go to Tcode : IDX5 in XI and click on Transaction ID field and check the status description which explains the problem.
(4) Error Scenario - Partner profile not configured.
Go to Tcode WE20 in R/3 system and check if the partner profile has been configured correctly and is filled with the inbound parameters.
regards
chandra -
Error while calling webservice(in XI) from XML spy
Hi,
We have created the webservice in XI and generated/exported WSDL file.
We have imported WSDL file to XML Spy and tried to send the SOAP Request, but we are facing the following error:
<?xml version="1.0"?>
<!-- see the documentation -->
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP:Body>
<SOAP:Fault>
<faultcode>SOAP:Server</faultcode>
<faultstring>Server Error</faultstring>
<detail>
<s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
<context>XIAdapter</context>
<code>RecoverableException</code>
<text><![CDATA[
com.sap.aii.af.ra.ms.api.RecoverableException: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:CO_TXT_OUTBINDING_NOT_FOUND:
at com.sap.aii.af.mp.soap.ejb.XISOAPAdapterBean.process(XISOAPAdapterBean.java:855)
at com.sap.aii.af.mp.module.ModuleLocalLocalObjectImpl3.process(ModuleLocalLocalObjectImpl3.java:103)
at com.sap.aii.af.mp.ejb.ModuleProcessorBean.process(ModuleProcessorBean.java:261)
at com.sap.aii.af.mp.processor.ModuleProcessorLocalLocalObjectImpl0.process(ModuleProcessorLocalLocalObjectImpl0.java:103)
at com.sap.aii.af.mp.soap.web.MessageServlet.callModuleProcessor(MessageServlet.java:159)
at com.sap.aii.af.mp.soap.web.MessageServlet.doPost(MessageServlet.java:383)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
]]></text>
</s:SystemError>
</detail>
</SOAP:Fault>
</SOAP:Body>
</SOAP:Envelope>
Please provide the precious inputs.
Thanks,
RameshHi,
Did the request reach XI? If yes,
What is the status of the Sender SOAP adapter? Any error in MONI?
if no message is in XI, then check if the user id has the role of SAP_XI_APPL_USER.
Regards
Bhavesh -
Idoc partner type LI to File Scenario.
Hello Experts .
I have the following scenario.
IDOC partner type LI to xml (file).
So we are not atlking about logical system here and we may have to use parties.
But I am not sure as to how to go about this approach.
For now we have Idoc coming into XI but failing after that .(Outbinding) error in reciver agreement (not to be confused with a cache issue .).
But I understand it is because of the parties not defined properly.
So I have defined a party and assigned my ECC system to the same.File was basically a service.Do I need to define another party for it or several other identifier
Tried to follow How Tou2026
Sample IDoc-XI
Scenarios document but it is to confusing.
Kindly helpThanks for your reply.
Well I have already tried this approach.
That is
Created a party :Sender_party.
Identifiers :
<sapid><client> :*ALE#LI* :<venderno> actually ALE#LI #LF "otherwise I end up with party service not found.
Receiver determination:
sender party
<BS/service> i.e. <sapid><client> to mail_service (for testing to see if I recieve a payload)
<interface>
<urn>
Interafce determination
sender party
<BS/service> i.e. <sapid><client> amd <interface> interface mapping
<urn>
Reciever agreement.
mail_service : reciever mail adapter.
Error recieved.
<!-- Technical Routing
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="OUTBINDING">CO_TXT_OUTBINDING_NOT_FOUND</SAP:Code>
<SAP:P1>-DMGCLNT400</SAP:P1>
<SAP:P2>Sender_Party-,urn:sap-com:document:sap:idoc:messages.Z_DELL_PO.ORDERS05.Z_DELL_POX</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No receiver agreement found for sender -DMGCLNT400 to receiver Sender_Party-,urn:sap-com:document:sap:idoc:messages.Z_DELL_PO.ORDERS05.Z_DELL_POX</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Kindly note nothing is wrong with cache .
It is strange DMGCLNT400 is already assigned to the party . . -
Getting Receiver Agreement issue in IDOC to File scenario
Hi Gurus,
Need your help. I'm working on a IDOC to File scenario. I'm using CREMDM.CREMDM04 as outbound Interface & small structure VEND_FILE_IN_MI as Inbound Interface. Though I've configured the receiver Communication Channel as a File Adapter with proper Inbound Interface I'm seeing the message getting failed which is showing CREMDM.CREMDM04 as both Outbound & Inbound interface and pointing a Receiver Agreement issue . The Receiver service is coming Properly, only the Interface is coming wrong as the sender interface. I've checked both Receiver Agreement & Receiver determination and found the Receiver Service, Communication Channel & Interface are perfectly mapped there, I cross checked the same Configurations in IE via SXI_CACHE after full Cache copy.
Error Message:
No receiver agreement found for sender -SAPERP to receiver -IDOC2FileReceiver,urn:sap-com:document:sap:idoc:messages
Error Category : Outbounding
Error ID : CO_TXT_OUTBINDING_NOT_FOUND
My IR design:
Sender:
Interface : VEND_IDOC_OUT_MI
Message Type : CREMDM.CREMDM04
Receiver:
Interface : VEND_FILE_IN_MI
Message Type : VEND_IN_MT , Data Type VEND_FILE_DT
My ID Config:
1. Sender / Outbound Message: Service Type --> Business System
Service ---> SAPERP
Interface--> VEND_IDOC_OUT_MI
Adapter Type : IDOC
2. Receiver / Inbound Message: Service Type --> Business Service
Service --> IDOC2FileReceiver
Interface ---> VEND_FILE_IN_MI
Adapter Type--> File
3. In Sender Agreement : Specified the Sender Communication Channel
VEND_IDOC_OUT_Channel
4. In Receiver Agreement Configured the receiver service IDOC2FileReceiver aging sender service SAPERP & Interface VEND_IDOC_OUT_MI.
5. In Interface Determination Specified the Inbound Interface VEND_FILE_IN_MI and Interface Mapping VEND_IDOC_FILE_IMAP
6. In Receiver Agreement specified the receiver communication Channel IDOC2FileChannel against Receiver Service & Interface.
I used the Configuration wizard in my second attempt to make sure the sequence of configuration.
Can anyone help me identifying what's going wrong. I'm very new to XI and basically this is the first assignment I'm working on.
Regards,
SubhadipHi Babu,
In the Inbound data type all the fields have MinOccurance = 0 and MaxOccurances unbounded.
Please find the XSD:
<?xml version="1.0" encoding="ISO-8859-1"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://adc.com/poc/sample" targetNamespace="http://adc.com/poc/sample">
<xsd:complexType name="VEND_FILE_DT">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
8f584d80456311dccd680018fe79f69b
</xsd:appinfo>
</xsd:annotation>
<xsd:sequence>
<xsd:element name="VENDCODE" minOccurs="0" maxOccurs="unbounded">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
a8653cb0390c11dc843000188bd09370
</xsd:appinfo>
<xsd:documentation xml:lang="EN">
Vendor Code
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:minLength value="0" />
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="VENDNAME1" minOccurs="0" maxOccurs="unbounded">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
a8653cb4390c11dc84e800188bd09370
</xsd:appinfo>
<xsd:documentation xml:lang="EN">
Vendor name4
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:minLength value="0" />
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="ORT01" minOccurs="0" maxOccurs="unbounded">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
a8653cb5390c11dcbe3400188bd09370
</xsd:appinfo>
<xsd:documentation xml:lang="EN">
Vendor City
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:minLength value="0" />
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="PFACH" minOccurs="0" maxOccurs="unbounded">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
a8653cb6390c11dc896100188bd09370
</xsd:appinfo>
<xsd:documentation xml:lang="EN">
Vendor PO Box
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:minLength value="0" />
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="STRAS" minOccurs="0" maxOccurs="unbounded">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
4811db0335fd11dc9e9600188bd09370
</xsd:appinfo>
<xsd:documentation xml:lang="EN">
Vendor House No & Street
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:minLength value="0" />
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="PSTLZ" minOccurs="0" maxOccurs="unbounded">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
4811db0435fd11dc98b000188bd09370
</xsd:appinfo>
<xsd:documentation xml:lang="EN">
Vendor Postal Code
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:minLength value="0" />
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="LAND1" minOccurs="0" maxOccurs="unbounded">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
4811db0535fd11dc870500188bd09370
</xsd:appinfo>
<xsd:documentation xml:lang="EN">
Vendor Country
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:minLength value="0" />
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="STCD1" minOccurs="0" maxOccurs="unbounded">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
7ca8d600403b11dcc9bd00188bd09370
</xsd:appinfo>
<xsd:documentation xml:lang="EN">
Tax Number 1
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:minLength value="0" />
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="TELF1" minOccurs="0" maxOccurs="unbounded">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
9abaee7040e611dcce4300188bd09370
</xsd:appinfo>
<xsd:documentation xml:lang="EN">
Telephone number
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:minLength value="0" />
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="STCEG" minOccurs="0" maxOccurs="unbounded">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
9abaee7140e611dc8f3900188bd09370
</xsd:appinfo>
<xsd:documentation xml:lang="EN">
VAT Registration Number
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:minLength value="0" />
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="LIFNR" minOccurs="0" maxOccurs="unbounded">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
9abaee7240e611dccef700188bd09370
</xsd:appinfo>
<xsd:documentation xml:lang="EN">
Account Number of Vendor or Creditor
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:minLength value="0" />
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="ALTKN" minOccurs="0" maxOccurs="unbounded">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
9abaee7340e611dcb3bc00188bd09370
</xsd:appinfo>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:minLength value="0" />
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:schema> -
How to setup acknowledgements? Please help!
Hi Experts,
I have following scenario.
IDOC--> XI----> BizTalk
In this scenario, IDOC is sent from SAP R/3 system to XI. XI then sends it to BizTalk using JMS adapter.
Everything works fine and BizTalk also receives the IDOC message. But there is one problem.
When I see the message in SXMB_MONI then I see that there are entries like below:
Status | Ack. Status
Checked flag (Processed Successfully) I Error Flag (Acknowledgment not possible)
Then when I see the details for this entry I get the following error info where BTS_DEV refers to the receiver BizTalk and SAPSYS refers to the IDOC sender system..
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/"
SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="OUTBINDING">CO_TXT_OUTBINDING_NOT_FOUND</SAP:Code>
<SAP:P1>,BTS_DEV</SAP:P1>
<SAP:P2>,SAPSYS,,</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>No receiver agreement found for sender ,BTS_DEV to receiver ,SAPSYS,,</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
So, what is the problem? Why am I getting error for acknowledgment? What is the system trying to do with acknowledgment?
How does acknowledgments work? What do I need to do to prevent getting this error? Do I need to do something in BizTalk to prevent it?
It will be great if somebody can explain this in detail and give me step by step instructions to resolve it.
Thanks & Regards
Gopal
Edited by: GOPAL BALIGA on Jul 22, 2009 6:23 AM1. What "Service" value i need to give? Will it be BizTalk system or SAP System that sends IDOC?
It is the SAP system which is supposed to receive the IDOC ACK message
2. What is this "RFC destination" used for? Where does this exist?
RFC destination in SM59 of your SAP system
3. What is this "Port"? Again what is this used for and where does this exist?
Check this blog for answer to your Qs
/people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
Regards,
Abhishek.
Edited by: abhishek salvi on Jul 22, 2009 11:03 AM -
IDoc-Tunneling -- No Receiver Agreement
Hi, i am trying to do the IDoc-Tunneling scenario from Michal.
Well everything looks fine so far except that i get following error:
+<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="OUTBINDING">CO_TXT_OUTBINDING_NOT_FOUND</SAP:Code>
<SAP:P1>-Q01CLNT010</SAP:P1>
<SAP:P2>0000010007-,urn:sap-com:document:sap:idoc:messages.DELFOR.DELFOR01</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Es konnte keine Empfängervereinbarung für den Sender -Q01CLNT010 zum Empfänger 0000010007-,urn:sap-com:document:sap:idoc:messages.DELFOR.DELFOR01 gefunden werden</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>+
Well i have Receiver Agreement that looks like:
Sender Service: Q01CLNT010
Receiver Service: EDI
Interface: DELFOR.DELFOR02
Namespace: urn:sap-com:document:sap:idoc:messages
CC: IDOC_RECEIVER_EDI
In this Receiver-CC i also activated
- Apply Control Record Values
- Take sender from payload
However, i have no clue what is wrong.
Can somebody help? br JensHi Jens
(6) Error Category - CO_TXT_OUTBINDING_NOT_FOUND
The problem is in Technical routing.
Check whether the receiver determination and interface determination objects are active in change lists tab. If they are not active, activate the objects.
check the if the receiver determination and interface determination objects are referenced to the same namespace or not. Sender and receiver interface objects should always refer to the same Namespace.
Please refer the follwoing blog for details
<b>/people/venugopalarao.immadisetty/blog/2007/01/24/troubleshooting-file-to-idoc-scenario-in-xi
Thanks
AbhishekMahajan
*****Please reward points if helpful********* -
Error sending data to an SCMTM system from an R3 system
Dear Friends
I am trying to send an Idoc from R3 system to an SCMTM system.
I have imported the idoc, message mapping is preconfigured from SAP and requisite configurations in ID have been completed.
I am getting this error in sxmb_moni when I use FTP adapter to post the data to SCMTM system:(it is showing as processed successfully)
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Technical Routing of Response
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="OUTBINDING">CO_TXT_OUTBINDING_NOT_FOUND</SAP:Code>
<SAP:P1>,BS_TM7_100</SAP:P1>
<SAP:P2>,BS_ECV_350,,</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>No receiver agreement found for sender ,BS_TM7_100 to receiver ,BS_ECV_350,,</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
When I tried to do this with Idoc receiver adapter but it was giving this following error in Call adapter:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_WRONG_INTF</SAP:Code>
<SAP:P1>ShipmentRequestRequest_In</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Unable to interpret IDoc interface ShipmentRequestRequest_In</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Do we have to use some other way of sending data to SCMTM system?or what should we use?
Do we have to suppress any acknowledgements in IDXNOALE,then please give me the steps for it
Please help.
Thank You
Warm Regards
Arjun Ghose
Edited by: Arjun Ghose on Apr 7, 2009 10:48 AMHi Rajesh
Found the problem in Receiver agreement/Operation Mapping /Message Mapping after running the test:
Operation Mapping
DESADVDELVRY03_2_ShipmentRequestRequest
Runtime error
Runtime exception occurred during application mapping com/sap/xi/tf/_DESADVDELVRY03_to_ShipmentRequestR~; com.sap.aii.utilxi.misc.api.BaseRuntimeException:Parsing an empty source. Root element expected!
... (136 lines)
In message mapping I tested, but it gave no error.In Operation Mapping there was error:
18:19:04 Start of test
RuntimeException during appliction Java mapping com/sap/xi/tf/_DESADVDELVRY03_to_ShipmentRequestRequest_
com.sap.aii.mappingtool.tf7.IllegalInstanceException: Cannot create target element /ns0:ShipmentRequestRequest. Values missing in queue context. Target XSD requires a value for this element, but the target-field mapping does not create one. Check whether the XML instance is valid for the source XSD, and whether the target-field mapping fulfils the requirement of the target XSD at com.sap.aii.mappingtool.tf7.AMappingProgram.processNode(AMappingProgram.java:366) at com.sap.aii.mappingtool.tf7.AMappingProgram.start(AMappingProgram.java:496) at com.sap.aii.mappingtool.tf7.Transformer.start(Transformer.java:133) at com.sap.aii.mappingtool.tf7.AMappingProgram.transform(AMappingProgram.java:626) at com.sap.aii.ib.server.mapping.execution.JavaMapping.executeStep(JavaMapping.java:92) at com.sap.aii.ib.server.mapping.execution.Mapping.execute(Mapping.java:60) at com.sap.aii.ib.server.mapping.execution.MappingHandler.map(MappingHandler.java:87) at com.sap.aii.ib.server.mapping.execution.MappingHandler.map(MappingHandler.java:54) at com.sap.aii.ibrep.server.mapping.rt.MappingHandlerAdapter.run(MappingHandlerAdapter.java:139) at com.sap.aii.ibrep.server.mapping.exec.ExecuteIfMapCommand.execute(ExecuteIfMapCommand.java:33) at com.sap.aii.ib.server.mapping.exec.CommandManager.execute(CommandManager.java:43) at com.sap.aii.ibrep.server.mapping.ServerMapService.execute(ServerMapService.java:40) at com.sap.aii.ibrep.server.mapping.MapServiceBean.execute(MapServiceBean.java:40) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(RequestInvocationContext.java:43) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:166) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTransition.invoke(Interceptors_StatesTransition.java:19) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource.invoke(Interceptors_Resource.java:71) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.doWorkWithAttribute(Interceptors_Transaction.java:38) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.invoke(Interceptors_Transaction.java:22) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:189) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatelessInstanceGetter.invoke(Interceptors_StatelessInstanceGetter.java:16) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_SecurityCheck.invoke(Interceptors_SecurityCheck.java:21) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_ExceptionTracer.invoke(Interceptors_ExceptionTracer.java:16) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChainsManager.startChain(DefaultInvocationChainsManager.java:133) at com.sap.engine.services.ejb3.runtime.impl.DefaultEJBProxyInvocationHandler.invoke(DefaultEJBProxyInvocationHandler.java:164) at $Proxy1579_10000.execute(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at com.sap.engine.services.rmi_p4.P4DynamicSkeleton.dispatch(P4DynamicSkeleton.java:234) at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:351) at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:70) at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:62) at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:37) at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:872) at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:53) at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:58) at com.sap.engine.core.thread.execution.Executable.run(Executable.java:108) at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:304)
18:19:05 End of test
I could not make out where is the problem .Please help. -
Hello everybody,
i am implementing an idoc-flatfile scenario (PI 7.1). It works to write an xml file into directory, as soon as I use FCC in order to generate txt-file, no file is written, and sxmb_moni shows an acknowledgement with system error. In both cases sxmb_moni shows the following acknowledgement:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!--
Technisches Routing der Antwort
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="OUTBINDING">CO_TXT_OUTBINDING_NOT_FOUND</SAP:Code>
<SAP:P1>,ZZ_CC_IBDLV</SAP:P1>
<SAP:P2>,ZZ_CC_IBDLV,,</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Es konnte keine Empfängervereinbarung für den Sender ,ZZ_CC_IBDLV zum Empfänger ,ZZ_CC_IBDLV,, gefunden werden.</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Inbound = idoc SHP_OBDLV_SAFE_REPLICA
message type for outbound:
ZZ_DT_OBDL Complex Type
header Element 1
-test1 Element xsd:string 1
-test2 Element xsd:string 1
item Element 0..unbounded
-itemtest Element xsd:string 1
-itemtest2 Element xsd:string 1
FCC:
Recordset structure: header,item,*
header.addHeaderLine 1
header.fieldNames test1,test2
header.fieldSeperator ,
header.processConfiguration FromConfiguration
header.endSeperator 'nl'
item.addHeaderLine 1
item.fieldNames itemtest,itemtest2
item.fieldSeperator ,
item.processConfiguration FromConfiguration
item.endSeperator 'nl'
I also tried StrictXml2PlainBeanu2026 doesnu2019t work eitheru2026 thanks in advance,
LukasIt works to write an xml file into directory, as soon as I use FCC in order to generate txt-file, no file is written
--->
use
Recordset structure: header,item
In receiver FCC, do not specify occurrences in recordset structure
Also fieldNames parameter is also not required.
RWB--> Message Monitoring, select Details of your message, you will find FCC errors here -
PI alert email body generating incorrect URL for message monitering
Dear Friends,
I need some light on the following problem, really appreciate your inputs and help
1.)
From the Runtime Work Bench, we are getting email into company out look express when there is an error in interface execution . It is working good.
But in side email content , we are getting URL Link for message moniter to view the failed PI message in RWB, this url is not working to display the failed message because of space before message id.
Can you please help me to know, at run time where this URL gets generated in the email, or where we can correct this URL in PI ?
2 .) In development and quality the URLs generated are completely different other than host, port.
IN COMPANY OUT LOOK EXPRESS EMAIL AS FOLLOWS:
From: RUNTIME WORKBENCH SERVICE [mailto:XIRWBUSER Company.com]
Sent: Sunday, November 20, 2011 11:48 AM
To: TestUser1;TestUser2
Subject: PI Message Failure XID: SI_CRMXIF_PARTNER_SAVE_M03_To_CustGenericModel_In_Create ;BusService_GM
Importance: High
Alert ID: ##24685##
Date: 20.11.2011 _ 11:47:41
System: XID 200
Error Category:
Error Code: OUTBINDING.CO_TXT_OUTBINDING_NOT_FOUND
Adapter Error: No receiver agreement found for sender ,BusService_GCOM to receiver ,BS_SAP_CRM_
Message ID: A9F89891139F11E1C22D0000065C4DE6
Sender Service: BusService_Test
Sender Interface: SI_CRMXIF_PARTNER_SAVE_M03_To_CustGenericModel_In_Create
Receiver Service: BS_SAP_CRM_PCA
Receiver interface: SI_CRMXIF_PARTNER_SAVE_M03_To_CustGenericModel_In_Create
Adapter Type:
Rule Name: Alert Rule for Customer Interfaces Inbound
Message Monitor http://abcc.sap.compugra.com:8010/sap/bc/gui/sap/its/webgui?~transaction=*SXI_SHOW_MESSAGE MSGGUID=A9F89891139F11E1C22D0000065C4DE6
Quality Environment url:
Message Monitor http://abcc.sap.compugra.com:51000/mdt/index.jsp?objectName=type=XIAdapterFramework&messageid=005056B0001F02DFB2FABF97C45A9DB3
Thanks and Regards.
SurajDear Rajesh,
The following are the exchange profile parameters for AFW, RWB.
Appreciate your immediate help.
Adapter Framework
parameter name value
com.sap.aii.adapterframework.serviceuser.language EN
com.sap.aii.adapterframework.serviceuser.name XIAFUSER
com.sap.aii.adapterframework.serviceuser.pwd *********
Runtime Work Bench
parameter name value
com.sap.aii.rwb.server.centralmonitoring.httpport 8043
com.sap.aii.rwb.server.centralmonitoring.httpsport @com.sap.aii.rwb.server.centralmonitoring.httpport@
com.sap.aii.rwb.server.centralmonitoring.name
com.sap.aii.rwb.server.centralmonitoring.r3.ashost abcc.sap.compugra.com
com.sap.aii.rwb.server.centralmonitoring.r3.client 200
com.sap.aii.rwb.server.centralmonitoring.r3.group
com.sap.aii.rwb.server.centralmonitoring.r3.mshost
com.sap.aii.rwb.server.centralmonitoring.r3.r3name
com.sap.aii.rwb.server.centralmonitoring.r3.sysnr 43
com.sap.aii.rwb.serviceuser.language EN
com.sap.aii.rwb.serviceuser.name XIRWBUSER
com.sap.aii.rwb.serviceuser.pwd ......
Thanks.
Suraj.
Maybe you are looking for
-
My Macbook Pro Retina, Mavericks 10.9.5 has clicking problems...?
Hi, I think this is more a NEED-TO-FIX than anything else... but whenever Im using my mac, on safari, or chrome, or even just on the desktop, I experience trouble clicking. I click for example in safari, to minimize the tab, or to close a tab. It doe
-
Regza LCD HDTV 52XF550U has wide black stripes on the right side
Hi, my 2008 REGZA LCD 52XF550U has wide black stripes on the right side. I think the problem started within 24 months from my purchase. And the stripes are getting wider. I have tried to reset the setup, power off and on, all to no avail. See att
-
Cp 6 no blinking cursor in text entry box
Howdy, Upon slide enter, when a slide has a text entry box, there would be a blinking cursor in the TEB to help alert the user that they will need to type something. Howerver, in Cp 6 I'm not seeing a blinking/flashing cursor in a TEB like I did with
-
Option to get rid of the "Home" and "Call phones" buttons
Love Skype, I use it primarily as an IM. But I never use those two buttons, and I can't seem to get rid of them. Please provide an option in the View menu to hide them!
-
Include Icons in Export to PDF
Hi When a web template has exceptions applied to it, the user has the option to show those exceptions in colour, or with icons. Seeing that they print in black and white, it seemed like a better plan to show the exceptions with icons. This works in t