CO - Version Settings for year 2013
Hi All,
There is a current requirement for extension of staff contract in our organistion.
We are getting the following error" Version 0 is not defined for fiscal year 2013"
Can i add another entry for 2013 in config?
If so what values can i assign?
The settings for the actual version for each fiscal year is as follows:
2011- checked version locked
2012- checked version locked
Please advice.
Moderator: yes, you can copy the version
Hi,
Select the current year or 2012 and copy.
Give 2013 for new entry.
Regards,
Krishna Kishore
Similar Messages
-
Outlook PRF file settings for Exchange 2013 environment
Hi Team,
Client - Outlook 2007
Existing environment - exchange 2007
New environment - exchange 2013
Recently migration of exchange 2007 to exchange 2013 happened in our environment subsequently some users mailboxes are moved from exchange 2007 to exchange 2013.
In the Exchange 2007 environment, users outlook profile settings are applied via importing the below prf file and it works fine.
;Automatically generated PRF file from the Microsoft Office Customization and Installation Wizard
; Section 1 - Profile Defaults
[General]
Custom=1
ProfileName=outlook
DefaultProfile=Yes
OverwriteProfile=Yes
ModifyDefaultProfileIfPresent=false
; Section 2 - Services in Profile
[Service List]
ServiceX=Microsoft Outlook Client
ServiceEGS=Exchange Global Section
Service1=Microsoft Exchange Server
ServiceEGS=Exchange Global Section
; Section 3 - List of internet accounts
[Internet Account List]
; Section 4 - Default values for each service.
[ServiceX]
CachedExchangeMode=0x00000002
CachedExchangeSlowDetect=true
[ServiceEGS]
CachedExchangeConfigFlags=0x00000900
MailboxName=%UserName%
HomeServer=mailboxserver.exchange.xxx.xx
[Service1]
OverwriteExistingService=No
UniqueService=Yes
MailboxName=%UserName%
HomeServer=mailboxserver.exchange.xxxx.xa
AccountName=Microsoft Exchange Server
; Section 5 - Values for each internet account.
; Section 6 - Mapping for profile properties
[Microsoft Exchange Server]
ServiceName=MSEMS
MDBGUID=5494A1C0297F101BA58708002B2A2517
MailboxName=PT_STRING8,0x6607
HomeServer=PT_STRING8,0x6608
OfflineAddressBookPath=PT_STRING8,0x660E
OfflineFolderPathAndFilename=PT_STRING8,0x6610
[Exchange Global Section]
SectionGUID=13dbb0c8aa05101a9bb000aa002fc45a
MailboxName=PT_STRING8,0x6607
HomeServer=PT_STRING8,0x6608
RPCoverHTTPflags=PT_LONG,0x6623
RPCProxyServer=PT_UNICODE,0x6622
RPCProxyPrincipalName=PT_UNICODE,0x6625
RPCProxyAuthScheme=PT_LONG,0x6627
CachedExchangeConfigFlags=PT_LONG,0x6629
[Microsoft Mail]
ServiceName=MSFS
ServerPath=PT_STRING8,0x6600
Mailbox=PT_STRING8,0x6601
Password=PT_STRING8,0x67f0
RememberPassword=PT_BOOLEAN,0x6606
ConnectionType=PT_LONG,0x6603
UseSessionLog=PT_BOOLEAN,0x6604
SessionLogPath=PT_STRING8,0x6605
EnableUpload=PT_BOOLEAN,0x6620
EnableDownload=PT_BOOLEAN,0x6621
UploadMask=PT_LONG,0x6622
NetBiosNotification=PT_BOOLEAN,0x6623
NewMailPollInterval=PT_STRING8,0x6624
DisplayGalOnly=PT_BOOLEAN,0x6625
UseHeadersOnLAN=PT_BOOLEAN,0x6630
UseLocalAdressBookOnLAN=PT_BOOLEAN,0x6631
UseExternalToHelpDeliverOnLAN=PT_BOOLEAN,0x6632
UseHeadersOnRAS=PT_BOOLEAN,0x6640
UseLocalAdressBookOnRAS=PT_BOOLEAN,0x6641
UseExternalToHelpDeliverOnRAS=PT_BOOLEAN,0x6639
ConnectOnStartup=PT_BOOLEAN,0x6642
DisconnectAfterRetrieveHeaders=PT_BOOLEAN,0x6643
DisconnectAfterRetrieveMail=PT_BOOLEAN,0x6644
DisconnectOnExit=PT_BOOLEAN,0x6645
DefaultDialupConnectionName=PT_STRING8,0x6646
DialupRetryCount=PT_STRING8,0x6648
DialupRetryDelay=PT_STRING8,0x6649
[Personal Folders]
ServiceName=MSPST MS
Name=PT_STRING8,0x3001
PathAndFilenameToPersonalFolders=PT_STRING8,0x6700
RememberPassword=PT_BOOLEAN,0x6701
EncryptionType=PT_LONG,0x6702
Password=PT_STRING8,0x6703
[Unicode Personal Folders]
ServiceName=MSUPST MS
Name=PT_UNICODE,0x3001
PathAndFilenameToPersonalFolders=PT_STRING8,0x6700
RememberPassword=PT_BOOLEAN,0x6701
EncryptionType=PT_LONG,0x6702
Password=PT_STRING8,0x6703
[Outlook Address Book]
ServiceName=CONTAB
[LDAP Directory]
ServiceName=EMABLT
ServerName=PT_STRING8,0x6600
UserName=PT_STRING8,0x6602
UseSSL=PT_BOOLEAN,0x6613
UseSPA=PT_BOOLEAN,0x6615
EnableBrowsing=PT_BOOLEAN,0x6622
DisplayName=PT_STRING8,0x3001
ConnectionPort=PT_STRING8,0x6601
SearchTimeout=PT_STRING8,0x6607
MaxEntriesReturned=PT_STRING8,0x6608
SearchBase=PT_STRING8,0x6603
CheckNames=PT_STRING8,0x6624
DefaultSearch=PT_LONG,0x6623
[Microsoft Outlook Client]
SectionGUID=0a0d020000000000c000000000000046
FormDirectoryPage=PT_STRING8,0x0270
WebServicesLocation=PT_STRING8,0x0271
ComposeWithWebServices=PT_BOOLEAN,0x0272
PromptWhenUsingWebServices=PT_BOOLEAN,0x0273
OpenWithWebServices=PT_BOOLEAN,0x0274
CachedExchangeMode=PT_LONG,0x041f
CachedExchangeSlowDetect=PT_BOOLEAN,0x0420
[Personal Address Book]
ServiceName=MSPST AB
NameOfPAB=PT_STRING8,0x001e3001
PathAndFilename=PT_STRING8,0x001e6600
ShowNamesBy=PT_LONG,0x00036601
; Section 7 - Mapping for internet account properties. DO NOT MODIFY.
[I_Mail]
AccountType=POP3
;--- POP3 Account Settings ---
AccountName=PT_UNICODE,0x0002
DisplayName=PT_UNICODE,0x000B
EmailAddress=PT_UNICODE,0x000C
;--- POP3 Account Settings ---
POP3Server=PT_UNICODE,0x0100
POP3UserName=PT_UNICODE,0x0101
POP3UseSPA=PT_LONG,0x0108
Organization=PT_UNICODE,0x0107
ReplyEmailAddress=PT_UNICODE,0x0103
POP3Port=PT_LONG,0x0104
POP3UseSSL=PT_LONG,0x0105
; --- SMTP Account Settings ---
SMTPServer=PT_UNICODE,0x0200
SMTPUseAuth=PT_LONG,0x0203
SMTPAuthMethod=PT_LONG,0x0208
SMTPUserName=PT_UNICODE,0x0204
SMTPUseSPA=PT_LONG,0x0207
ConnectionType=PT_LONG,0x000F
ConnectionOID=PT_UNICODE,0x0010
SMTPPort=PT_LONG,0x0201
SMTPSecureConnection=PT_LONG,0x020A
ServerTimeOut=PT_LONG,0x0209
LeaveOnServer=PT_LONG,0x1000
[IMAP_I_Mail]
AccountType=IMAP
;--- IMAP Account Settings ---
AccountName=PT_UNICODE,0x0002
DisplayName=PT_UNICODE,0x000B
EmailAddress=PT_UNICODE,0x000C
;--- IMAP Account Settings ---
IMAPServer=PT_UNICODE,0x0100
IMAPUserName=PT_UNICODE,0x0101
IMAPUseSPA=PT_LONG,0x0108
Organization=PT_UNICODE,0x0107
ReplyEmailAddress=PT_UNICODE,0x0103
IMAPPort=PT_LONG,0x0104
IMAPUseSSL=PT_LONG,0x0105
; --- SMTP Account Settings ---
SMTPServer=PT_UNICODE,0x0200
SMTPUseAuth=PT_LONG,0x0203
SMTPAuthMethod=PT_LONG,0x0208
SMTPUserName=PT_UNICODE,0x0204
SMTPUseSPA=PT_LONG,0x0207
ConnectionType=PT_LONG,0x000F
ConnectionOID=PT_UNICODE,0x0010
SMTPPort=PT_LONG,0x0201
SMTPSecureConnection=PT_LONG,0x020A
ServerTimeOut=PT_LONG,0x0209
CheckNewImap=PT_LONG,0x1100
RootFolder=PT_UNICODE,0x1101
[INET_HTTP]
AccountType=HOTMAIL
Account=PT_UNICODE,0x0002
HttpServer=PT_UNICODE,0x0100
UserName=PT_UNICODE,0x0101
Organization=PT_UNICODE,0x0107
UseSPA=PT_LONG,0x0108
TimeOut=PT_LONG,0x0209
Reply=PT_UNICODE,0x0103
EmailAddress=PT_UNICODE,0x000C
FullName=PT_UNICODE,0x000B
Connection Type=PT_LONG,0x000F
ConnectOID=PT_UNICODE,0x0010
I have changed the home server in [ServiceEGS] and [Service1] with the CAS Array VIP configured with the DNS name
autodiscoverservices.exchange.xxxx.xx but it is not working and getting "Exchange server unavailable" error. Some one have any idea how to
configure the user outlook profile via a prf file which works with exchange server 2013 autodiscover services. Is there any more settings to be applied to the PRF file to make it work.
[ServiceEGS]
CachedExchangeConfigFlags=0x00000900
MailboxName=%UserName%
HomeServer=autodiscoverservices.exchange.xxxx.xx
[Service1]
OverwriteExistingService=No
UniqueService=Yes
MailboxName=%UserName%
HomeServer=autodiscoverservices.exchange.xxxx.xx
AccountName=Microsoft Exchange ServerMay I ask why you changed the home server to autodiscoverservices.exchange.xxxx.xx?
Basically, we set it to Microsoft Exchange server address.
Flynn -
IMAP settings for Outlook 2013
I am getting an "unrecognized response" error when setting up a residential IMAP Account in Outlook 2013 connecting to my Vz email account.
the account specifics are using
incoming.yahoo.verizon.net on 995 SSL
outgoing.yahoo.verizon.net on 465 SSL
Outgoing requires authentication.
Anyone who can has the right answer to set up an IMAP Account in Outlook 2013? I think I have the right settings, but I cam getting this crazy error. And of course, Vz help was not helpful as they do not support IMAP. They only support easy items that are cheap to support not valuable and functional things clients want/need.
CareyStill more POP email accounts in the world then IMAP.
I was never a fan of leaving my message on a server, and like being able to access my email when I don't have internet access.
Imap is of course popular for those with smart phones/devices and not enough memory to store all their messages/attachments on them. -
KeepAlive settings for Exchange 2013 environment
Hello All,
We have very weired problem in our environment. Our environment consists of 10 Exchange 2013 multi-role servers in Primary DC with Wind 2012 OS and 5 servers in Secondary DC with Wind 2012. We have F5 LB & Cisco f/w
Sometime back users reported the outlook disconnection issue and we've implemented following settings in the environment based on MS support team recommendation
1) Configure the Idle session time out on the Network devices to 2 hours.
2) Add the registry key “MinimumConnectionTimeout” with value as 120
seconds as per below article on all the Exchange 2013 Servers. Once this registry key is added, we need to restart the Server for the changes to take effect..
Path: HKLM\Software\Policies\Microsoft\Windows NT\RPC
Type: REG_DWORD
Name: MinimumConnectionTimeout
Value: 120 (Decimal)
3) Add the KeepAliveTime registry key on all the Exchange 2013 Servers
to reduce the Keep alive from default 2 hours to 5 minutes. Once this registry key is added, we need to restart the Server for the changes to take effect.
Path: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\TCPIP\Parameters
Value name: KeepAliveTime
Type: REG_DWORD
Value: 300000 (Decimal)
This value controls how frequently TCP tries to verify that an idle
connection is still intact by sending a keep-alive packet. If the remote computer is still reachable, it acknowledges the keep-alive packet. The recommended value setting is 300,000 (5 minutes).
After applying these settings we've started facing the ACTIVESYNC issue in the environment. We've changed the keep alive setting in exchange server to 29 mins and now activesync issue is solved but outlook disconnect issue started
IS THERE ANYONE who can recommend what is the correct KEEP ALIVE value should be kept in such environment
Our environment has 27K mailboxes totally spread across 50 DBs apprx
Appreciate experts help here !!!
Vinoth Kumar. M
Vinoth Kumar. MJust to add one more point here
All our network devices including F5 LB has 30 mins as the idle time out value.
We've added below registry values also in all AD DC & Exchange servers
MaxConcurrentAPI
http://support.microsoft.com/kb/2688798
5 in DC
10 in Exchange servers
Vinoth Kumar. M -
Help needed on making Bex version settings for RRMX
Hi BW Gurus,
When i make RRMX , BW 3.5 BEx is opening as default.
But I need BI 7.0 Bex to open as default when i make RRMX,because I need to open my workbook through a portal link.I created my workbook in BI 7.0 Bex and so in BW 3.5 Bex my workbook is not opening.
Where i should make the settings.
I tried setting in SPRO and also in the global settings of the BI 7.0 Bex by opening it from the start menu.
Still nothing works out.
Can someone throw light on my problem.
Thanks in advance
Regards
SamHi Sam,
Check this out:
/message/2274270#2274270 [original link is broken]
/people/prakash.darji/blog/2006/07/26/troubleshoot-the-sap-netweaver-2004s-bi-frontend-installation
R,
Adwin -
Planning function to copy version A of year 2007 to Version B of 2008 - IP
I have a copy planning function which has a variable on from version and to version and it works fine.I can copy.So version to version for the same year works fine.
Another requirement is to copy Version A of year 2007 to version B of year 2008.For this in the planning function I made version,year and calyearmonth all 3 as changeable and have variables on from version from year and to version and to year.I don't have a variable on calyearmonth.
I run the query for version B and year 2008 and CALYEARMONTH 1/2008-12/2008 and it returns empty results as there is no data for version B for year 2008.then I execute the planning function to copy data from version A and year 2007 to version B and year 2008.I am getting the following error "CalyearMonth is not included in selection".I ran the query for 1/2008 - 12/2008.I didn't understand this.
In the planning function filter I don't have any filter for calyear and calyear month.But it is there in the query.
ThanksHi Siva,
Since you do not have the calmonth as the change characteristic in your plannning function.The values would be copied to year 2008 with month as #.
So there would be no values for months of 2008 and hence you are getting that error.
You need to copy the month figures also for data to be seen in the report.
Assign points if useful.
Ajay -
I require a TIMS database add in for office 2013
The add in for that was available for Office 2010 and 2007 edition. I am on a 2013 office edition. I cant seem to find the add in version for 2013. Is there a work around for that?
Hi UDIT,
From the description, you want to find a TIMS database add-in for Office 2013 and the add-in only available for Office 2007 and Office 2010 edition.
I suggest that you contact the vendor of this add-in to see whether there is a new version works for Office 2013.
Best regards
Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
I recently updated my Firefox browser to version 26.0 and my Java to version 7 update 51 and now I can't access any of the Yahoo games I have played for years. I get a box that says "your security settings have blocked an untrusted application from running. Also, the box has two other lines; Name: ygames_applet and Location: http://yog10.games.sp2.yahoo.com. After all this time, this browser and my Chrome browser both give me this crap when I try to log in to yahoo games.
See:<br />
What should I do when I see a security prompt from Java?:
* http://www.java.com/en/download/help/appsecuritydialogs.xml -
Activating Country version India for specific fiscal years
hi guruz,
what is the significance of the 'Activate Country version India for specific fiscal years' option in the SPRO -> Financial Accounting -> Financial accounting Global Settings -> Tax on Sales and purchase -> Basic Settings -> India -> Activate Country version India for specific fiscal years.what is the significance of the 'Activate Country version India for specific fiscal years' option in the SPRO -> Financial Accounting -> Financial accounting Global Settings -> Tax on Sales and purchase -> Basic Settings -> India -> Activate Country version India for specific fiscal years.
In the above activity, you can Specify for which fiscal years you want to activate Country Version India for the accounting interface.
In the table, maintain data as follows:
Comp. (Component): IND
To year: 2999
Active: X
Regards,
Ashok -
I have a CC student membership for one year, but I can only download trial versions of for example illustrator and indesign (30 days). How do I solve this problem?
If there is no billing issue,
Creative Cloud applications unexpectedly revert to trial mode | CS6, CCM
If you use Photoshop at all, you may need to install the latest update to resolve this issue. See this blog post for more information:
http://blogs.adobe.com/crawlspace/2013/01/photoshop-13-0-413-1-2-updat es-now-available.html
If you do not have Photoshop, then try the solution that others have mentioned previously:
Open the Adobe Application Manager (AAM).
If applicable, let AAM complete any automatic updates and restart itself.
Sign in with your Adobe ID. (Optionally, you can close AAM at this point.)
Open a CS6 application (e.g. InDesign CC).
If prompted (e.g. you get the trial screen), click "License This Software" and sign in with your Adobe ID.
Refer to: Re: Top Ten Questions About Creative Cloud
creative cloud software says my free trial has expired, but I have a paid subscription
Regards
Rajshree -
I have a new iPad3 and have found I cannot open the month of March 2013 when I tap on it. All other months open OK ! I can see March 2013 in the yearly view and I can open the individual days, and weeks, of March 2013 but I cannot see the whole month in the monthly view. When I try to open the monthly view for March 2013 it returns me to the start screen which shows all the apps etc and closes the Calendar app. Any guidance of what is going wrong and how it can be corrected. Thanks !
Don't worry we have to start somewhere. Feel free to post your questions here, we learn from each other.
-
firefox.exe has encountered a problem and needs to close. We are sorry for the inconvenience.
I have been using firefox for years. I installed the latest version of Firefox. It worked fine for several days. Now I get the above message each time I try to start Firefox, even in safe mode. i have checked with latest antivirus softwere also.. i didn't find any thing suspicious.
== This happened ==
Every time Firefox opened
== after loading firefox 3.6.6 ==
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.99 Safari/533.4I was having this problem few days ago,and I have fixed.Try this steps-If you have AVG antivirus so go on firefox>Tools>Add On and Disable AVG safe search and AVG tool bars too.Then restart computer.
-
Please Help!!!
How to write a case statement for the totals column of two different years (2013 and 2014) of the same month so that I can get a +/- column.
January 2014 January
2013 +/-
Region Entry Exit Total Entry Exit Total (Total of Jan2014-Total of Jan2013)
A 2 3
40 5 7 30 40-30= 10What is a table structure? Sorry cannot test it right now..
SELECT <columns>,(SELECT Total FROM tbl WHERE Y=2014)-(SELECT Total FROM tbl WHERE Y=2013)
FROM tbl
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence -
I am using OS 64 bit Windows Vista Home Premium and recently updated the latest version of iTunes. (I only have this CD burning software on my Laptop). Ever since updating, I received the message 'Registry settings for the iTune drivers are missing for CD burning'. The drivers for Lower and uppper filters in the registry are missingand I now have no optical drive. I have unistalled and reinstalled Itunes and manually entered the filters. Have tried everything including something called GEAR driver installer which was suggested on several technical sites. Everything was working fine in iTunes until I updated it.. It's strange I can still import music but not burn?? Friend s have told me they have ha dthe same problem when updating iTunes but resolved the problem by uninstalling/reinstalling or altering registry keys.
Today I went to use my Epson Printer and now have problems with it not working. I decided to uninstall/ install printer software and still can't get it to work either. I may be wrong but his all seems connected to me?
I have been trying for days to get telephone support and been told today you have to pay
Please can someone help me before I throw the lot out the window!!!!Many thanks b Noir
This is a copy of ONEof the keys in the registry I changed as told by Apple support today. I also have changed others as instructed by GEAR software support to manually delete GEAR drivers (that I had installed but couldn't delete some of the others they mentioned from Windows system 32. Then some bright spark at work told me I need the Gear drivers so I downloaded the software and installed again.
Sorry, just this minute went to insert image and it is giving me a message saying this sort of content is not allowed?.
The most recent key I altered is in: HKey _local _machine. System\class - 4D36E965-E325-11CEBFC1-08002BE10318. Upper Filter data: Upper filter NTIDrvr SiRem GEARAspiWDN.
The GEARsoftware info about manually deleting GEAR drive is from:
http://www.gearsoftware.com/wiki/index.php?title=DRIVERS:_Windows_-_Updating%2C_ removing%2C_64_bit_versions%2C_etc
I hope you can help -
for the 2013 versions of macbook pro should I purchase 32 bit windows or 64 bit version to be able to install it on macbook and use windows with bootcamp?
Then you might check at any of the other university book stores or software stores or any computer store in town for the 64-bit version.
If you want to use the 32-bit version from the school (you probably get it for free or very cheap) then you could purchase Parallels and run it as a virtual machine concurrently with OS X. There are some caveats:
1. You have to purchase Parallels (there may be an academic discount.) List is $79.95.
2. Your computer needs minimally 4 GBs of RAM, but realistically 8 GBs would be better.
3. Parallels creates a pseudo-drive on your hard drive. It could easily require 50 GBs of disk space.
Accommodating these might be more costly than buying 64-bit Windows 7. And, if you look online you may find them with an academic discount (or may be able to order it through the school.)
Maybe you are looking for
-
Error in JMS-Receiver-Adapter when restarting MQ-Channel
Dear all, we've configured a scenario with a JMS-Receiver (MQ-Series). When the MQ-Channel or the MQ-Queue-Manageris restarted, the connection to MQ get lost and is not re-established even when we restart the communication channel. When we restart th
-
Any idea why command-shift-delete is not working?
I have had a MacBook Pro for a few years, and recently purchased a new iMac. the iMac arrived, and I transferred everything from the MBP to the iMac using the Migration Assistant. Worked very well, from what I can tell. The only thing I am unable to
-
Hello. I have one problem. I have 2 components? for example compA and compB. In compB I used compA. From compB I give parameters to compA throuth Context mapping and in compA execute RFC using this parameters. After execute I want to mapping result c
-
Hello Everyone, My problem is that my oracle database I am pulling my data from has bullets inside of the fields. Now, a bullet is part of the extended ascii character set, ie takes 2 bytes. So, I tried to fix the issue with the following code: Where
-
Deploytool hangs when run on Win XP Home
Hello, I'm trying working with the J2EE SDK on Windows XP Home Edition. I can start the j2ee server but when I try to run the deploytool the splash screen comes up but then it hangs. Does anybody know why this is happening?