CO01 and error CK465

Hello,
I am doing a cost calculation of a finished product. My finished product has its own bill of material and its routing. When i go to calculate the cost of the finished product by CK11N the system calculates correctly the amount for it.
The problem is when i go to calculate the cost by CO01 for the material. When I try to calculate it the system makes and error No price could be determined for material/batch XXXXXXX ( the finished product)/ plant XXXX. Its like the system wanted a price for the finished product, but that price has to be calculated like is doing in ck11n. It is not a raw material it is a finished product.
The both variant ( for ck11n and for co01) has been defined with the same caractheristics.
Anyone can help me please?
Thank you very much in advance.

Did you release the costing run co11n ??
if you dont have material price in your material master you got that error.
maintain the standard price in your material master or release a co11n costing run.

Similar Messages

  • TS1368 I'm a PC user with an itunes account for several years. I updated my itunes and now it wont open and shows me 'missing file MSVCR80.dll,and error 7(Window error 126)' keep coming up even after re-installing itunes . What should i do?

    I'm a PC user with an itunes account for several years. I updated my itunes and now it wont open and shows me 'missing file MSVCR80.dll,and error 7(Window error 126)' keep coming up even after re-installing itunes . What should i do?

    Click here and follow the instructions.
    (98897)

  • Problem with DMGs and error: "No Mountable File Systems"

    Problem with DMGs and error: "No Mountable File Systems"
    The files are not corrupt. The problem is occurring with all DMGs that are apparently formatted in MS-DOS FAT16. No the file will not mount with Disk utility or any other disk mounter programs I have found.
    This is now the second time this occurred and now effects my MBP and my iMac. First time i spent days with Apple support and the only solution was ultimately back up the data, reformat the HD, start over from scratch and reload everything. That lasted about a month before the problem resurfaced and is now an issue on both iMac and MBP.
    I tried to identify all the programs I installed immediately before the error, as I am convinced it is the result of a software conflict.
    Recent programs includes:
    1) upgrading from Parallels 5.5 to 6.0 on both machines.
    2) using an HP secure II usb drive and setting up a secure disk.
    3) installing new itunes 10
    4) new update to Flip For Mac.
    The files affected are downloaded dmgs, including personal brain and google earth, both which are formatted in FAT16.
    Any help or thoughts? Apple has now spent hours trying and they say i now have to reformat and wipe and start over. That is unacceptable and based on pasted experience the problem is likely to repeat itself. having to wipe and rebuild a HD ever month is not an solution. i need to fid the root problem.
    In the meantime, anyone got a real solution on how to extract the data for a DMG using a different method?
    Message was edited by: remaia

    Where you able to find the solution, i am having the same problem, all was fine till i install some programs only same one i saw did we both did was flip4mac i uninstalled it but the problem is still there, i also restored and erased the hardrive but im not up to doing that all over again. If you found anything out let me know i would greatly appreciate it

  • I updated to iTunes 12 and didn't like it. Followed advice to revert to 11.1. Now my iphone won't sync and error message says I need iTunes 11.2 or higher. Apple Download choices didn't have anything between 11.1.5 and 12. What can I do?

    I updated to iTunes 12 and didn't like it. Followed advice to revert to 11.1. Now my iPhone 5 won't sync and error message says I need iTunes 11.2 or higher. Apple Download choices didn't have anything between 11.1.5 and 12. What can I do? Using iTunes 12 is not an option. Many features I used for audiobooks have disappeared.

    The version immediately prior to 12 was 11.4.0.18. Here are direct download links from Apple's servers:
    iTunes 11.4.0.18 for Windows (32-bit) - iTunesSetup.exe (2014-09-09)
    iTunes 11.4.0.18 for Windows (64-bit) - iTunes64Setup.exe (2014-09-09)
    tt2

  • Every time I try to open my safari it restarts my computer, or if it does open it is for only about a minute before it gets and error and closes.What should I do?

    Every time I try to open my safari it restarts my computer, or if it does open it is for only about a minute before it gets and error and closes.What should I do?

    gets and error and closes.What should I do?
    If Safari is crashing.. post a crash report so we can try and help...
    If Safari has just crashed, press the Report button on the CrashReporter dialog box to view the crash  information.
    Copy/paste the entire contents of the Crash Reporter window into your reply including the, "binary images" seection.
    If the crash report dialog does not appear or the crash is hard to reproduce, crash logs can be retrieved from the ~/Library/Logs/CrashReporter> folder.

  • When I try to update my apps on my MacBook Pro, Ipad, and Ipod it wont allow me. On the computer it says theres and error. (11111) But on the Ipod and Ipad it starts to update and completely stops. What should I do?

    When I try to update my apps on my MacBook Pro, Ipad, and Ipod it wont allow me. On the computer it says theres and error. (11111) But on the Ipod and Ipad it starts to update and completely stops. What should I do?

    Maybe this.
    Fix iPhone Apps Stuck "Waiting" During Installation
    Try update the apps one at a time

  • HT1926 just lost my itunes after doing a update. getting error message MSVCR80.dll and ERROR 7 (Windows error 126)I even tried to reinstall the whole program off from here. What happened? HELP!

    I tried to open my Itunes toady on my home computer. It said to update the library so I did. Now it wont open or anything. Tried reinstalling everything and get the error messages posted in the title above. Please Help. I have a lot tied into Itunes. Now when I check for updates it says everything is upt to date but when I try to open it i still get these two erroe messages.    MSVCR80.dll and ERROR 7 (Windows error 126)

    Hello berlinfire1979,
    The following article provides further information regarding this error, and steps that can help get iTunes working again.
    iTunes for Windows: "Error 7" message when opening iTunes
    http://support.apple.com/kb/TS3074
    Cheers,
    Allen

  • My ipod generation 5 will not come out of recovery mode. i was simply updating my software and this happened. it will not let me restore it comes up with and error. please help, thanks.

    my ipod generation 5 will not come out of recovery mode. i was simply updating my software and this happened. it will not let me restore it comes up with and error. please help, thanks.

    Hey erinoneill24,
    Thanks for using Apple Support Communities.
    Sounds like you can't update your device. You don't mention an error that it gives you. Take a look at both of these articles to troubleshoot.
    iPod displays "Use iTunes to restore" message
    http://support.apple.com/kb/ts1441?viewlocale=it_it
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808?viewlocale=de_DE_1
    If you started your device in recovery mode by mistake, restart it to exit recovery mode. Or you can just wait—after 15 minutes the device will exit recovery mode by itself.
    Have a nice day,
    Mario

  • I just upgraded my mac book to 10.6.8 and downloaded the new version of itunes. When I try to open it and error message appears saying, "The iTunes Library file cannot be found or created. The default location for this file is in the "iTunes" folder.

    I just upgraded my mac book to 10.6.8 and downloaded the new version of itunes. When I try to open it and error message appears saying, "The iTunes Library file cannot be found or created. The default location for this file is in the "iTunes" folder in the "Music" folder."
    I have tried a few things but iTunes closes right after i click okay. Anyone know anything?

    Look in your Home > Music folder.  There should be an iTunes folder there and it should have a number of files and folders including one called library.itl  You want to guide iTunes to that file.  If you don't see that file or folder then in your next post you will have to be very specific as to what you do see or how you have your iTunes set up because that's where it should be according to default settings.

  • Lightroom encountered and error when reading from it preview cache and needs to quit

    A power outage caused my Lightroom 5.2 to shut down without closing.  When I powered back up and opened lightroom it gives me an error "Lightroom encountered and error when reading from it preview cache and needs to quit" and then it says it will try to fix it the next time it opens. I have opened it 20 times and it is not fixing it. I removed the program completely and upgraded to 5.5 AND it is still giving me the same error.  Is my catalog corrupt or something? I had it set to automatically load the most currently used catalog, so it is not allowing me to open or start a new catalog either. HELP!!!

    Search the forum, this has been answered many times.

  • "Lightroom encountered and error when reading from its preview cache and needs to quit"

    I keep receiving this error every time I open LR, "Lightroom encountered and error when reading from its preview cache and needs to quit" and the app won't open. It said LR would try and fix this error next time I opened it but the error remains. I tried uninstalled and installing the app and the error remains.
    Any Ideas here? Is there another app that may be telling it where to look for the cache and it no longer there? I was using a ramdisk for a bit but ditched it. Not sure if that has something to do with it but it seems suspect.
    Your thoughts?
    --Kenny Brandon Wilson

    Talked to Adobe support this morning, this is their response in case anyone else is looking for help. I'm running a Windows 7 box, LR 5.6.
      Gokul: Click on start and type %appdata%, then open roaming folder.
      Edward: ok
      Gokul: Open Adobe folder.
      Gokul: Open Lightroom folder.
      Gokul: Open Lightroom folder> Preferences.
      Edward: ok
      Gokul: Rename Lightroom 5 Preferences.agprefs file as Lightroom 5 Preferences.agprefsOLD.
      Edward: OK
      Gokul: Please check if you can launch Lightroom without any error.
      Edward: it shows me a welcome screen and is asking me to select my country
      Edward: aka, register the software
      Gokul: You can skip and launch it.
      Edward: LR catalog not found
      Gokul: Please select the catalog.
      Edward: my original catalog?
      Gokul: Yes.
      Edward: testing integrity of catalog
      Edward: loaded just fine
      Gokul: Okay.
      Gokul: Please check if you can re-launch it again.
      Edward: yes, it worked!
      Gokul: Excellent!
      Gokul: Since your preferences were corrupted you were facing issue so we renamed the preferences file to reset it.
      Edward: aha....ok
    All of my import/export presets were intact along with develop user presets. I'm happy as a clam for my $10/month!

  • I keep receiving this error every time I open LR, "Lightroom encountered and error when reading from its preview cache and needs to quit" and the app won't open. It said LR would try and fix this error next time I opened it but the error remains. I tried

    I keep receiving this error every time I open LR, "Lightroom encountered and error when reading from its preview cache and needs to quit" and the app won't open. It said LR would try and fix this error next time I opened it but the error remains. I tried uninstalled and installing the app and the error remains. I have windows 8. Can anyone please help???

    Use Windows Explorer to open the folder containing your catalog. The normal location is Pictures\Lightroom. Locate a folder with the extension .lrdata and delete that folder. Then you should be able to start Lightroom again, and Lightroom will begin building and new previews folder. Do not delete anything else.

  • I have design standard with creative cloud, I have installed this on 2 computers, my office and home which I was told was allowed, I have just tried to open an indesign file from the office at home and and error message said that this was created with a n

    I have design standard with creative cloud, I have installed this on 2 computers, my office and home which I was told was allowed, I have just tried to open an indesign file from the office at home and and error message said that this was created with a newer version? they are the same versions and both are up to date, I was asked this morning to put in my adobe id email and password to connect to CC which I have never been asked to do before, can anyone help?

    what's your home version (click help>about) and was that just a warning so you were able to open the file?

  • Trying to send e-mail and error message " a copy has been placed in your outbox. the sender address was rejected by the server"

    trying to send e-mail and error message " a copy has been placed in your outbox. the sender address was rejected by the server"

    i have the same problem with my 3gs and tried to add my email acc+pass in the outgoing server but it got rejected.
    just bin on the phone(45min) with my carrier support about this issue they are pretty much scratching there head, the settings i should use gets verified with no problems when i add the outgoung server, but still cant send mails.

  • Just purchased online Adobe Acrobat XI Pro and error message appeared, but payment has been debited from my credit card already

    Hello,
    Just purchased online Adobe Acrobat XI Pro and error message appeared, but payment has been debited from my credit card already and I do not have the software, so paid for nothing.
    I am using a Mac OS X.
    Thanks for your help.
    Ossama

    [discussion moved to Acrobat Installation & Update Issues forum]

Maybe you are looking for