Co01 co02 batch creation

how to restrict batch creation in co01 and co02?
in co01 na co02 user is able to put any kind of value for batch.
my requirement is user should put the predefined batch for particular material only.
how to get it done??
regards
chandramani

Hi ,
Is it creating a new Batch No's ? , u can try Enhancements of this FM
VB_CREATE_BATCH
in this FM main program , search for CALL Custom --> u will get list of Enhancements , try EXIT_SAPLV01Z_002
see its documentation.
regards
Prabhu

Similar Messages

Automatic Batch creation for a material.

Hi Friends,
we require automatic batch creation at the time of confirmation of process order for a particular material not for all the materials existing in the same plant and also not for all the materials existing in the same material type.
we have activated batch level at the material level,
Pl give some idea,
Regards
Sadan

Hi,
Batch is created automatically either when an order is created or released. (setting in OPKP)
I hope its not possible during confirmation.

Automatic Batch Creation at the time of GR for Customer Returns

Hi All,
We are using batch management with functionality of automatic batch creation for variuos movement type 101/103/105/561 etc. with updation of classification in foreground.
We are even using automatic batch creation for Inbound delivery. By configuring IMG object "Batch creation Control for Inbound"
Now we have a new requirement of automatic Batch creation for GR of Customer Return against Customer Return SO (Movement type 651). And updation of classification in foreground.
I have tried a lot but couldn't find how to configure the same.
Can I create GR custmor returns 651 thru transaction MIGO?
Any suggestion how to achieve this.
Thanks
Sanjay

Hi,
What Sairam said is correct, the idea of automatic batch creation is so that when you manaufacture or create an item you can allocate the characteristics to that batch and give it a number.
You then sell that batch to a customer.
When the customer returns the item the system should NOT automatically allocate a new batch number to it because this is breaking a VERY important audit trail.
In batch management (in some inductries more than others) it is VITAL to have a full audit trail of a bathc so that any problems concerning that batch can be traced back to their origin. What you are trying to do is to break that audit trail (although I can fully understand what you are trying to do).
I would leave the batch allocation for returns as manual and then when you transafer the item from returns to unrestricted (or quality etc.) tyou can then input the new characteristics.
Steve B

Batch Creation or Batch Determination for 531 movement type

Dear Experts,
I have some confusion with Movement type 531 -
1) Can we do Batch determination for 531 movement type.
2) Can we do the automatic Batch creation at the production order level or confirmation level. In this case i have done the settings but in confirmation screen i have to create batch manually through Menu Path.
3) I have to enter characteristics value manually in confirmation screen as i have select classify batches in foreground. But in material master we have Batch Class type so can values comes from there to batch of confirmation screen.
Thanks & Regards,
Saurabh Kumar

Hello
Please read carefully notes 191368 and 194619. These are very old correction notes and they are already implemented on your system, however, they provide the following information about the system design:
For a by-product or co-product, no batch determination is executed anymore. The subsequent stock determination is not executed anymore either.
and
No batch determination for by-products may be executed during the confirmation.
It means that the batch determination for movemen 531 is not a functionality of the standard system.
I have never tested this scenario, however, as far as I know, the batch can be created automatically for the by-product if you are using internal number range on OMCZ.
BR
Caetano

Batch creation through ME21N, ME22N and MSC1N

Hi All,
Please note we are already using EXIT_SAPLV01Z_001, EXIT_SAPLV01Z_002, EXIT_SAPLV01Z_003, EXIT_SAPLCLFM_002, EXIT_SAPLV01Z_012, EXIT_SAPLV01Z_014 for Batch creation based on different logics for Material type, Plant and PO doc type and currently using these exits for logic it allows us to create new internal batch number during PO creation (ii) change already existing batch with some new number (of couse this number must not be used in some other PO) in PO change and (iii) create new internal batch number using MSC1N, by inputing plant, stor. loc etc. But currently i can create batch with 1 digit, 2 digit, and so on.
The requirement is to allow user to create batches only with 10 digits during:
(i)PO creation (ME21N)and PO change(ME22N) and also during
(ii) transaction MSC1N
currently in all three ME21N, ME22N or MSC1N it allows to create batch with 1 digit, 2 digit,3 digit and so on . i want to create batch with only 10 digit.
Please tell this is possible through configuration steps or some changes are required to be done in above said user exit.
Regards
Rahul Shukla

Hi Jurgen,
Thanks for your reply.
In ME21N i am able to assign batch in PO
(1) By clicking on 'create' button appearing just side of Batch field in item Tab "Material". I think this create button is appearing due to user exit being applied here. Here it creates and assigns internal number automatically (from range 01in Batch_Clt) based on the Material type and Plant combination (Some logic defined in user exit)
(2) By putting any random number manually (both numeric and alphanumeric)whether 1 digit, 2 digit,3 digit in Batch field in item Tab "Material" it will accept and in this case also po is saved.
same way i can do changes in batch number in ME22N and able to save.
In MSC1N also due to user exit applied if i give Material number alone and enter, it assignes the internal batch number based on Material type and plant logic defined in user exit.here also if i input some random number manually in batch field it accepts and that random batch number is created for material.
Now i want that i should be able to put random batch number manually but that number must be out of the number ranges defined in Batch_CLT object (Also the number must be exact 10 digits length as is there in defined number ranges) and not any random alphanumeric number . Also i am not able to understand how it is accepting random alphanumeric number (like ABC111)although all number ranges defined are numeric only.Also external number range is 0008000001 - 0089999999 which is numeric only.
Regards
Rahul

BATCH CREATION

Hi All,
Plz Tell me the procedure of <b>Batch Creation</b> in detail....with example...
Thanks & Regards,
<b>Anil Kumar</b>
Edited by: Csaba Szommer on Dec 14, 2011 12:40 PM

Hi,
Batch Creation can be done in process of Batch Management and it is used for subdividing the material.
You can follow the following customising steps for Batch.
1.Create Characterstics,CT04
2.Create Class,CL02
3.In material master, select classification view and tick batch management
4.Go to Logistic General->Batch Management->Batch Det and back Chk->Condition table-> Define Inventory Management Condition table
4.2 . Like wise Define Acess Sequense,
4.3.Strategy Types,
4.4.batch Serch Procedure,
4.5.Batch Srech Procedure and allocation,
4.6..Condition Record: Logistic->Central Function->Batch Management-> Batch Determination->Batch serch Stratergy->For Inventory Manament-> Create
Once you do all customising steps,Then you can receive the material as per you requirement.Example....Lets say Sulphuric Acid you are receiving 98%,70% and 50% purity.According to you requirement and supplied by the Vendor you can keep in three different batches.This characterstic of material you can maintain in creating the characterstic.
Hope the above will be helpful and then reward.If your question is answered, pl close it.
Regards,
Biju K
Message was edited by:
Bijay Kumar Barik
Message was edited by:
Bijay Kumar Barik

Batch creation date

HI,
Does anyone know the table for batch creation date, i have been searching for many hours, i need this to create a new batch search strategy for creation date rather than reciept date.
Or is it possible to set up a serach strategy using batch number?
Thanks
Frankie

Hello
Table MCH1
ERSDA - date of creation
Also MCHA

Batch creation at co11n and co15

Hi,
I wann create auto batch creation at the time of order confirmation i.e. at co11n and co15, can anyone tell step by step wht confg shd i require?
kindly assist

Hi,
If you are maintaining batch characteristics you cannnot create auto batch at the confirmation level as you have to create batch by the transaction MSC!N, then you can assign the batch number manually. IF you are not maintaining the batch characteristics then you can create auto batch at the prod order creation level that in the display mode or background, while doing confirmation you can automatically get the batch. If you want to get at the Confirmation level then the following steps
1. Control key OP00 Allow Auto GR
2. Scheduling profile OPKP Auto GR
3. Order type dependant parameters OPL8 Batch search procedure for 261 mvt type for raw material consumption.
4. Material master MM01 workscheduling view batch reqd entry and batch managed and prod unit and prod stor loc
5. Define batch creationn for batch creation for prod order
6. Define batch creation for Goods movements
7. Activate batch internal number assignment
for 5,6,7 SPRO -- Logistics -- General -- Batch management.

Batch Creation/Modification

Hi All,
I want to update one z-table whenever any batch is created or modified (classification data change).
My z-table contains Batch as key field. So, using CDHDR will not serve the purpose as when MSC2N is called for the second time onwards, CDHDR does not store Batch as only classification data is changed then.
I tried with BADI Batch_Master but it will fire only in case of MSC1N or MSC2N, but not when BAPI_GOODSMVT_CREATE with 309 Movement Type is used for Batch creation.
So, I want to update the table whenever there is any batch is created or changed.
Please help.
Rgds,
Avijit

Did you check:
EXIT_SAPLV01Z_005 BATCHCHK Function Module Exits for Check in Case of Batch Changes
EXIT_SAPLV01Z_006 BATCHCHK Function Module Exits for Check in Case of Batch Changes

Trigger Batch Creation from ME2xN

Hi guru, I've to trigger a batch creation...
These batches are created from standard code in Purchase Order Transaction, I've seen the BO of Batch object doesn't have any events, there is CL_PO_ITEM_HANDLE_MM class but the only event is CHANGE, and I don't know if I can use it.
How can I trriger the BATCH creation event?
Thanks a lot.
Antonio

Sorry but I don't understand... Standard code call the method Batch_Cration and there aren't enh-points to insert custom code, I've to trigger the Batch Object creation event.
I've tried with workflow but CL_PO_ITEM_HANDLE_MM class has only one event: CHANGED and BUS1001002 business object doesn't have any events.
So... How can I use workflow?

User defined field in CO01,CO02 ?

Dear Gurus,
My client want a User define Field in Production order , just for information purpose
How can I Create a user define field in this transaction ( CO01 / CO02 )
Pl. Guide
Regards,
Ishwar

Hi,
Go to operation view in the SFO. Select the operation, then follow menu path Operation - Operation details (key board shortcut - F7). Now you will find some tabs, the tab user field is somewhere near the end so you would need to proceed to the right.
Once you're in that tab, select the field you defined & hit enter. The fields will be displayed.
Also the user-ext PPCO0006 is used to default values to order header fields, i am not sure how this can be used to add tabs in order header.
Regards,
Vivek

Any standard transaction code to check Batch Creation Date of a batch?

Please let me know if you know any transaction to check batch creation date of a batch , preferably with valuation information.

Hi
You can try with MB5B. It wont give batch creation date, but it will give posting date (most of the cases posting date may be batch creation date)
Otherwise you can try to pull the information at table level MCHA-ERSDA and develop query.
regards
Srinivas

Batch Creation Date as a Virtual Characteristic in 0IC_C03 Inventory Cube

Dear Experts
Currently we have a Stock Aging report based on Document date. But our management requirement is Batch date wise.
Currently I am having Batch Creation date as an Attribute of 0Material info Object.
Is it possible to create a Virtual Characteristic for Batch Date and Include in the Cube?
If Possible please explain me the Procedure to Create Characteristic.
Thanks in Advance.
Viru
Edited by: Lankem-IT on Apr 15, 2011 3:43 PM

Refer link
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30f15839-0cf1-2b10-c6a7-ebe68cc87cdc?QuickLink=index&overridelayout=true
& check ur e-mail.

Change Batch creation date in MCH1

Hi all,
I have one requirement from our users.
They want to change the batch creation date in mch1 table.
Is it advisable to do that?
Please give your suggestions.
Regards,
sunny

Hi
Check with Transaction code MBC2.
Regards
Srilaxmi

Report for Inventory batch creation date

Hi experts,
Is there a report in SAP that shows inventory batch creation date? We want the actual creation date NOT when the batch was input into SAP. For example, we went live on 4/1/2010 with SAP but there are inventory batch created prior to that date. We want the creation date NOT the 4/1/2010 of data conversion date.
Regards
Rajneesh Gulati

Hi Rajneesh,
Check these tables which are relevant for batch management.
MCHA
MCH1
MCHB
Regards
Ram

Co01 co02 batch creation

Similar Messages

Maybe you are looking for