Co02-Documented Goods Movement

Hi,
I have done goods movement i,e Goods Issue in CO11N.
But I could not see Details in Doucmented goods movement.
I have done SPRO settings for the same in OPL8-Implementation-Documentation of Goods Movements.
Is there any thing else to be done.
Regards,
somiraghu

Dear Raghu,
i think Backflush is not activated, just check in CO14, inputting the order number &
Check the Goods movement tab whether components exists or not ( 261 movement type)
Regards
Madhu

Similar Messages

Not able to see the documented goods movement

Hi ,
The Problem is I cannot see the documents against the same combination of the order type and Plant for Ceratin period but can see the documented goods movements against the same orders for some other period.

Hi,
Check in OPL8, whether the Documented Goods Movemets is maintained or not.
This in the Second Tab page: Implementation.
Revert for further discussion..
Regards,
Siva

DOCUMENTED GOODS MOVEMENT FOR COLLECTIVE ORDER

Hi Guru's
In the 4.6C version
If i got to Production order from transaction code CO03 , Read the collective order , highlight the toplevel item and ''GOTO'' in the menu bar and select Documented goods movement , the display shows the Top level order AND the Sub-Assemblies.
( sub-assemblies goods movement with main assembly can be seen in the single screen)
In the ECC 6.0 Version
If i got to Production order from transaction code CO03 , Read the collective order , highlight the toplevel item and ''GOTO'' in the menu bar and select Documented goods movement , the display shows the Top level order only.
To see the Goods Movement in the Sub-Assemblies you have to go to each production order individually.
can this be changed in ECC 6.0 exactly to that seen in 4.6c version .
pls give me your valuable inputs at the earliest .
Thanks for your help.
Regards
satish k

Hi satish,
In collective order struture ,Automatic goods movement will be happened between toplevel & lower level.
Please check with "coll order goods mvt" settings for order type at OPJH For ECC 6.0 version.
Please also check with cost analysis for Goods movement.
Regards
Pradeep

Error documented goods movements

Hello PP experts
I have done the good issue of the components of a process order.
If I ckeck it in the order in Lits-> documented goods movement, sytem showe me an error 'There is no data for the selection'
What is wrong? why does not show me the movements of good issue?
Thanks in advance

Dear
Order type dependent parameters- Implementation tab - Documentation of goods movements - Make tick mark for all.

Documented Goods Movements COR3

Hello dear gurus:
I need your help, when I made a goods movements (261) with transaction COR6N, I can see the documented goods movements in COR3 (GoTo>List>Documented Goods Movements), but if I made the goods movements with transaction MB11 or any other I can't see the documented goods movements in COR3, If I checked the MB51 I can see all the Goods movements. (261 and 101).
Is there any way to make all the goods movements reflected in COR3???? no matter which transaction I use?

Adrian,
You are right. You need to activate the check box for "Unplanned Goods Issue" & "Goods Recipet for Purchase order"(Incase of non-stock Items). Now you would get the list of all goods movement document against the order.
Just have another suggestion, from your problem it appears that the goods Issue you are making using MB11 is not going as planned Issue. This is basically a simple transaction processing mistake, in MB11 transaction after entering plant/movement type/posting date click the "To order", in the pop-up screen input your order number and then click to adopt the details. Now if you post the goods Issue, even now i think you would be getting the document list in COR3 without making changes in COR4.
I think currently your users (or you) in MB11 transaction after entering entering plant/movement type/posting date details you are pressing Enter key and you are entering manually the process order number in the goods movment screen, if this way it is performed system would consider this as an unplanned Issue. The problem with this type of Issue is that it wont update the withdraw quantity against the reservation.
Regards,
Prasobh

Documented goods movements list in cooispi.

Hi,
Even though there are goods movements w.r.t. process order, they are not getting displayed in cooispi in the List - Documented Goods Movements. What could be the reason for this?
Thanks a lot..
Madhavi S

Hi Madhvi,
U can also the "Documented good movement" at header view of Process order .
Please also check with "documentation of goods movement" settings at COR4 for process order /plant combination.
Activate all the check boxs under Document good mvt table at Implementation tab in COR4 & create new order and do goodsmovement check with cooispi.
Pradeep
Edited by: Pradeep Kumar on Apr 9, 2008 10:15 AM

Process inst cat cons_1 documented goods movement in cor3 not updated

Dear Gurus, i have sent the cons_1 process inst cat to pi sheet and then send the related process message using co54. in order withdrawn qty is updated, but documented goods movement is not updated. please advise what should be done in order to update the documented goods movement in cor3?

Hi,
Check in CO54 whether all your messages are successfully sent or not . Ensure there are no errors as shown below..Check and revert...
Thanks
Kumar

Goods Movement not Documented for Prod Order

Hi All,
Why is that whenever i do a goods issue to the order , or reversal of goods issue to the order, it doesn''t get recorded in the system? Is there a related config that I missed?
Thank you in advance.

Dear
Go to OPL8, for your plant and order type combination - In the implementation tab make tick mark for all in status change documents , shop floor information system update, Release versions, and documented goods movements.
After updating this, create fresh order and check.

COGI error in relevance in production order goods movement

Hello,
Yesterday I have a COGI error with regards in reservation. "RE Quantity moved exceeded by 7,912 LB: 1000710 0111 0001 201200". But today someone done something on the production order, and the error yesterday in COGI are fixed. Am confused what happen or what they did to fixed this since yesterday the error still there but now it is gone.
when checking the Documented Goods Movement for material 1000710 in the production order here the details,
Goods MVt   Mat. Doc Mvt type Batch      Qty   Reservation
1                       4908430     261     201199    6000 1112345
1                       4908426     261     201198   14000 1112345
1                       4908437     262     201200   14000 1112345
2                       4908430     261     201200   14000
This is what it shows? could some one explain me with this data what was the reseason yesterday i did not fixed the COGI error while now it was fixed? and why in RESERVATION 1112345 it only shows qty 6000 not 14000 for this order?
Hope for your kind and urgent reply to this issue
Thanks
JJ
Edited by: John Jay Palisoc on Jul 24, 2008 5:02 AM

Hi JJ,
well, as far as I can see, there is an unplanned 261 (without reservation no.). This one (doc. 4908430) has wihtdrawn additional 14000 for batch 201200. Therefore, the later 262 posting (doc. 4908437) with 14000 for that batch could be put into store without error.
That's all
Regarding the reservation: It shows qty 6000 because as first step 14000 were withdrawn, then additional 6000 and then 14000 were put back. So 6000 remain.
Regards, Andreas
Edited by: Andreas Seibel on Jul 24, 2008 3:37 PM
Edited by: Andreas Seibel on Jul 24, 2008 3:40 PM
Edited by: Andreas Seibel on Jul 24, 2008 3:45 PM

COIS024 When trying to display the goods movement in COR2/COR3

Gents,
the system is issuing a COIS024 message (There is no data for the selection) when trying to display the documented goods movements for any process order. The order has both GI & GR. The message is also refering to OPJB saying we should set the type of this message to S in OPJB.
Any ideas why this is happening, or better a solution?
Regards,
Kenneth

Hi,
2 things:
1. In COR4, for plant - order type combination check in implementation tab if you have flagged the check boxes under documentation of goods movement. If it is not done, then flag the same, then all future goods movement will be documented.
2. If the above is done, then run SU53 & check if you have some authorization issue.
Regards,
Vivek

Process Order - Goods Movements

Hi All,
I am working with the process order (COR2/COR3). From the general data tab of the process order I am navigating to Documented Goods movements via the path Goto --> Lists --> Documented Goods movements.
I need to generate a report of these docs. I am just checking if there is any FM available for this. I did the search and could not find any. I am aware that these are available in the table MSEG which we can parse by the material no and the process order no. Is this the right way to get a list of these docs or do we have a better approach or any FM which I am missing.
Please drop in your inputs.
Thanks.

This info is available in the table AUFM - Goods movements for order .

Why i can not see the Document goods movements from T-CODE CO03 ?

Hello,
why i can not see the Document goods movements list use T-CODE CO03 ? I'm sure i have issueed for this production order. thanks.
xinzhou.

Hi,
Is this a problem with only one order? or with all the Orders of the same "Order Type".
If this is with only one Order, check goods movements actually done or not?
If this problem is with other Orders as well (same Order Type), then with the T.Code; OPL8.
In the 2nd Tab Page (Implemenation) - Whether the Check boxes are filled for Documented Goods Movements??
Regards,
Siva

COOIS confirmation vs document goods movement

Hello Guru,
I have question with regards to my production order, when check COOIS for Confirmation and in Documented Good Movement there is a difference, upon checking in Confirmation in COOIS i found out the detailed of all the confirmation and even the canceled confirmation was been recorded there but in the Documented Goods Movement there one loss cancellation not recorded on it? how this happen? how can i check this one?
Thanks

Hi,
Are you using Backflush? What is the delivered quantity shown in Production Order?
I had the same problem few days back. Pls refer to the thread below and if it matches your requirement, you may need to report the issue to SAP.
Not updating GR reversal
As per thier reply, the SAP system could be accessed by some external system. They have sent a patch to implement, which would clear the redundancy in the data.
I am still working on it. Will let you know the results if your requirement is same.
Pls revert.
Regards,
Rohit.

DOCUMENTATION OF GOODS MOVEMENT

How the documentation of goods movement is made active?

Hi,
In t.code opl8 for the order type you have to select the necessary options for doc to be active.
Regards,
SDS

Goods movement for production order

is there a way that goods that are produced moves in to blocked stock and after certain period of time (eg 3 days) they move in to unrestricted use automatically. can we do this

Hi,
In CO02, on "Goods receipt" tab you can set the "Stock type" in which the goods should be posted when you make confirmation.
You can set QI stock type in material master (MM02, "Work scheduling" tab), but I'm not aware of any possibility to set Blocked stock type as default... Is there any sense to post the goods directly into blocked stock type?
I'm afraid your requirement cannot be covered in standard system.
Regards,
Csaba

Co02-Documented Goods Movement

Similar Messages

Maybe you are looking for