CO09- structure to get the cumulative ATP quantity

Hello,
Maybe someone knows the structure in which I can find the quantity which is displayed in the column of "***.ATP qty". I tried to find it in structure: ATPDSX
Thanks a lot,
Yael.

Here is the documentation associated with the BAPI. It does explain what you have to do in order to see the requirements from a certain date.
<i>Using this function module, you can determine the receipt quantity still available for a particular material in a certain plant according to ATP logic (MRPII).
The availability check is carried out on transferring the material number, the plant and the input table (WMDVSX). The scope of the check, that is, which stocks, receipts and issues are to be included in the check is defined by the combination of checking group (material master) and cheking rule. In the function module, the system uses the checking rule defined in Sales & Distribution (A). You can overrule this checking rule by using an interface or a user-exit (exit_saplw61v_001). A similar procedure is also valid for the plant parameters. The customer number in the user-exit means that the plant selection can be controlled via the customer. If no plant parameters are given via the interface, the system uses the parameter 'WRK' saved in the user's fixed values.
The results of the availability check are recorded in the output table (WMDVEX). This table contains dates and available receipt quantities (ATP quantities). The results of the check depends on the following entries:
<b>If no date and no quantity is transferred, the system displays the ATP situation from today's date into the future as the result.
If only a date and no quantity is transferred, the system displays the ATP situation from the corresponding date as the result.
If both a date and a quantity are transferred, the system calculates the availability situation for the quantity specified.</b>
In the last two cases, the parameter 'DIALOGFLAG' is supplied. This can result in the following:
' ' (blank) <=> quantity completely available
'X' <=> only partial quantity available or not available at
all
'N' <=> Material not included in the availability check
(Material not relevant to the availability check)
The system also displays the end of the replenishment lead time (ENDLEADTME).
</i>
Check the bold text.
Srinivas

Similar Messages

How to get the open order quantity for a material

Hi All,
We need to get the open order quantity for materials. At present we are using the following logic...
SELECT VBAKVBELN VBAPPOSNR VBAP~KWMENG
    INTO TABLE IT_VBAP
FROM VBAP
INNER JOIN VBAK ON VBAKVBELN   = VBAPVBELN
INNER JOIN VAPMA ON VAPMAVBELN = VBAPVBELN
                  AND VAPMAPOSNR = VBAPPOSNR
INNER JOIN VBUP ON VBUPVBELN = VBAPVBELN
                 AND VBUPPOSNR = VBAPPOSNR
WHERE VAPMA~MATNR = IT_OUTPUT-MATNR
   AND VAPMA~WERKS = IT_OUTPUT-WERKS
    AND VBAK~AUART IN S_AUART
     AND VBUP~GBSTA NE 'C'.
But the Query takes quite a long time as it does a full range scan on all the tables. Is there any way the query can be improved, may be by creating an index etc? Or is there anyother way by which i can get the required data?
Any input is appreciated.
Regards
Brain.

This could help.
*& Report: zsdvr055                date written: 03/24/00              *
*& Author: Brian Huntley           last update: 03/24/00               *
*& Program Title: Open Order Report                                    *
*& Description: This report will create a list of sales documents      *
*&   that are open (contain at least one item that is not shipped).    *
*&   The report will sort by ship-to customer name and by sales        *
*&   document number.                                                  *
*& Tables:                                                             *
*& Files:                                                              *
*& Transactions:                                                       *
*& Changes:                                                            *
REPORT ZSDVR055 LINE-SIZE 255.
TABLES: VBPA,
        VBAP,
        VBUP,
        VBAK,
        VBKD,
        KNA1,
        VBEP,
        VBFA,
        LIKP,
        LIPS,
        EKET,
        T171T.
define hashed table for selected ship-to and sold-to SO's
TYPES: BEGIN OF TVBPA_TYPE,
         VBELN LIKE VBPA-VBELN,               "sales document
         POSNR LIKE VBPA-POSNR,               "item number
         PARVW LIKE VBPA-PARVW,               "partner function
         KUNNR LIKE VBPA-KUNNR,               "customer number
       END OF TVBPA_TYPE.
DATA: TVBPA TYPE HASHED TABLE OF TVBPA_TYPE
        WITH UNIQUE KEY VBELN POSNR PARVW WITH HEADER LINE.
define internal table for all selected SO's
DATA: BEGIN OF ITAB0 OCCURS 0,
        VBELN LIKE VBPA-VBELN,                "sales document
      END OF ITAB0.
define internal table for all selected SO items
DATA: BEGIN OF ITAB OCCURS 0,
        VBELN LIKE VBAP-VBELN,                "document number
        POSNR LIKE VBAP-POSNR,                "item number
        MATNR LIKE VBAP-MATNR,                "material
        ARKTX LIKE VBAP-ARKTX,                "description
        PSTYV LIKE VBAP-PSTYV,                "item category
        KDMAT LIKE VBAP-KDMAT,                "customer material
        NETWR LIKE VBAP-NETWR,                "net value
        WAERK LIKE VBAP-WAERK,                "currency
        KWMENG LIKE VBAP-KWMENG,              "quantity
        ERDAT LIKE VBAP-ERDAT,                "entry date
        NETPR LIKE VBAP-NETPR,                "net price
        KPEIN LIKE VBAP-KPEIN,                "pricing unit
        PRCTR LIKE VBAP-PRCTR,                "profit center
        ERNAM LIKE VBAK-ERNAM,                "entered by
        AUART LIKE VBAK-AUART,                "order type
        VKORG LIKE VBAK-VKORG,                "sales organization
        VTWEG LIKE VBAK-VTWEG,                "distribution channel
        VDATU LIKE VBAK-VDATU,                "requested date (header)
        BNAME LIKE VBAK-BNAME,                "name of orderer
        KUNNR LIKE VBAK-KUNNR,                "sold-to customer
        BZIRK LIKE VBKD-BZIRK,                "sales district
        KURSK LIKE VBKD-KURSK,                "conversion rate
        BSTKD LIKE VBKD-BSTKD,                "customer PO
        LFGSA LIKE VBUP-LFGSA,                "overall delivery status
        FKSAA LIKE VBUP-FKSAA,                "overall billing status
        KUNWE LIKE VBPA-KUNNR,                "ship-to customer
        NAME1 LIKE KNA1-NAME1,                "ship-to customer name
        ORT01 LIKE KNA1-ORT01,                "ship-to address
        REGIO LIKE KNA1-REGIO,                "ship-to region (state)
        LAND1 LIKE KNA1-LAND1,                "ship-to country
      END OF ITAB.
create internal table for open orders
DATA: BEGIN OF ITAB1 OCCURS 0,
        KUNNR LIKE VBAK-KUNNR,                "sold-to customer
        KUNWE LIKE VBPA-KUNNR,                "ship-to customer
        VBELN LIKE VBAP-VBELN,                "document number
        POSNR LIKE VBAP-POSNR,                "item number
        ZDATE1 LIKE VBEP-EDATU,               "requested date
        ZDATE2 LIKE VBEP-EDATU,               "scheduled date (confirm)
        ZDATE3 LIKE VBEP-EDATU,               "committed date
        ZQTY1 LIKE VBAP-KWMENG,               "qty ordered
        ZQTY2 LIKE VBEP-BMENG,                "backlog qty
        ZEXTD LIKE VBAP-NETWR,                "backlog net value
        ZDESC(30) TYPE C,                     "backlog description
      END OF ITAB1.
define internal table for SO schedule lines
DATA: BEGIN OF ITAB2A OCCURS 0,
        WADAT LIKE VBEP-WADAT,                "planned goods issue date
        VBELN LIKE VBAP-VBELN,                "document number
        POSNR LIKE VBAP-POSNR,                "item number
        WMENG LIKE VBEP-WMENG,                "qty ordered
        BMENG LIKE VBEP-BMENG,                "qty confirmed
      END OF ITAB2A.
define internal table for SO item request dates
DATA: BEGIN OF ITAB2B OCCURS 0,
        EDATU LIKE VBEP-EDATU,                "delivery date
        VBELN LIKE VBAP-VBELN,                "document number
        POSNR LIKE VBAP-POSNR,                "item number
        WMENG LIKE VBEP-WMENG,                "qty ordered
      END OF ITAB2B.
define internal table for SO item commit dates
DATA: BEGIN OF ITAB2C OCCURS 0,
        EDATU LIKE VBEP-EDATU,                "delivery date
        VBELN LIKE VBAP-VBELN,                "document number
        POSNR LIKE VBAP-POSNR,                "item number
        ROMS1 LIKE VBEP-WMENG,                "committed qty
      END OF ITAB2C.
define internal table for SO item deliveries
DATA: BEGIN OF ITAB3 OCCURS 0,
        VGBEL LIKE LIPS-VGBEL,                "sales document
        VGPOS LIKE LIPS-VGPOS,                "sales document item
        VBELN LIKE LIKP-VBELN,                "delivery number
        POSNR LIKE LIPS-POSNR,                "delivery item number
        WADAT LIKE LIKP-WADAT,                "planned GI date
        WADAT_IST LIKE LIKP-WADAT_IST,        "actual GI date
        LFIMG LIKE LIPS-LFIMG,                "actual qty delivered
        ERDAT LIKE LIKP-ERDAT,                "date created
        ERZET LIKE LIKP-ERZET,                "time created
      END OF ITAB3.
define internal table for SO item / delivery cross reference
DATA: BEGIN OF ITAB4 OCCURS 0,
        VBELV LIKE VBFA-VBELV,                "sales document
        POSNV LIKE VBFA-POSNV,                "sales document item
        VBELN LIKE VBFA-VBELN,                "delivery number
        POSNN LIKE VBFA-POSNN,                "delivery item
        VBTYP_N LIKE VBFA-VBTYP_N,            "document category
        RFMNG LIKE VBFA-RFMNG,                "qty delivered
        PLMIN LIKE VBFA-PLMIN,                "plus/minus flag
      END OF ITAB4.
define local variables
DATA: ORDR_QTY LIKE VBEP-WMENG,          "order qty
      CONF_QTY LIKE VBEP-BMENG,          "confirmed qty
      NOCONF_QTY LIKE VBEP-BMENG,        "qty not confirmed
      DELV_QTY LIKE VBEP-WMENG,          "qty delivered
      NODELV_QTY LIKE VBEP-WMENG,        "qty not delivered
      REMAIN_QTY LIKE VBEP-WMENG,        "qty remain to get conf date
      REQ_DATE LIKE VBEP-EDATU,          "request date
      COM_DATE LIKE VBEP-EDATU,          "committed date
      DELV_QTY1 LIKE VBEP-WMENG,         "preceding delivery qty
      REMAIN_QTY1 LIKE VBEP-WMENG,       "qty remain to get reqest date
      REMAIN_QTY2 LIKE VBEP-WMENG,       "qty remain to get commit date
      THIRD_QTY LIKE VBEP-WMENG,         "3rd party no PO qty
      SO_STOCK LIKE MSKA-KALAB,          "sales order stock
      ZPRICE LIKE VBAP-NETPR,            "unit price USD
      ADRS1(40) TYPE C,                  "concatenated city and region
      ADRS2(45) TYPE C,                  "city, region and country
      ADRS3(80) TYPE C,                  "name, city, rgn, ctry
      ZCNTR TYPE I.                      "counter
define select options
SELECTION-SCREEN BEGIN OF BLOCK BLK1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS: S_VKORG FOR VBAK-VKORG DEFAULT '1000',
S_VTWEG FOR VBAK-VTWEG DEFAULT '10' NO-DISPLAY,
S_SPART FOR VBAK-SPART DEFAULT '00' NO-DISPLAY,
S_KUNNR FOR VBPA-KUNNR MATCHCODE OBJECT DEBI,
S_KUNWE FOR VBPA-KUNNR MATCHCODE OBJECT DEBI.
SELECTION-SCREEN SKIP.
SELECT-OPTIONS:
S_BZIRK FOR VBKD-BZIRK,
S_PRCTR FOR VBAP-PRCTR,
S_MATNR FOR VBAP-MATNR MATCHCODE OBJECT MAT1,
S_ERNAM FOR VBAK-ERNAM,
S_ERDAT FOR VBAP-ERDAT.
SELECTION-SCREEN END OF BLOCK BLK1.
AT SELECTION-SCREEN.
IF S_KUNNR IS INITIAL AND S_KUNWE IS INITIAL.
    MESSAGE E005(ZM) WITH TEXT-100.
ENDIF.
MAIN PROGRAM
INITIALIZATION.
INCLUDE ZSYHEADR.
START-OF-SELECTION.
PERFORM 100_GET_SO_ITEMS.
PERFORM 200_GET_NO_DELIVERY.
PERFORM 300_GET_NO_GOODS_ISSUE.
PERFORM 400_GET_PARTIAL_DELIVERY.
PERFORM 500_GET_THIRD_PARTY.
PERFORM 900_CREATE_LIST.
FORM 100_GET_SO_ITEMS
FORM 100_GET_SO_ITEMS.
get SO's for selected ship-to and sold-to customers
REFRESH TVBPA.
IF NOT S_KUNNR IS INITIAL.
    SELECT VBELN POSNR PARVW KUNNR
      FROM VBPA INTO TABLE TVBPA
     WHERE KUNNR IN S_KUNNR AND PARVW = 'AG' AND VBELN < '0080000000'.
ENDIF.
IF NOT S_KUNWE IS INITIAL.
    SELECT VBELN POSNR PARVW KUNNR
      FROM VBPA APPENDING TABLE TVBPA
      WHERE KUNNR IN S_KUNWE AND PARVW = 'WE' AND VBELN < '0080000000'.
ENDIF.
DESCRIBE TABLE TVBPA LINES ZCNTR.
IF ZCNTR = 0.
    WRITE: /1 'No data found for selection'.
    STOP.
ENDIF.
eliminate duplicate SO's
LOOP AT TVBPA.
    CLEAR ITAB0.
    MOVE TVBPA-VBELN TO ITAB0-VBELN.
    APPEND ITAB0.
ENDLOOP.
DELETE ADJACENT DUPLICATES FROM ITAB0.
get SO detail
SELECT VBAP~VBELN VBAP~POSNR VBAP~MATNR VBAP~ARKTX VBAP~PSTYV
      VBAP~KDMAT VBAP~NETWR VBAP~WAERK VBAP~KWMENG VBAP~ERDAT
      VBAP~NETPR VBAP~KPEIN VBAP~PRCTR VBAK~ERNAM VBAK~AUART
      VBAK~VKORG VBAK~VTWEG VBAK~VDATU VBAK~BNAME VBAK~KUNNR
      VBKD~BZIRK VBKD~KURSK VBKD~BSTKD VBUP~LFGSA VBUP~FKSAA
    FROM VBAP INNER JOIN VBUP ON VBUP~VBELN = VBAP~VBELN AND
        VBUP~POSNR = VBAP~POSNR
      INNER JOIN VBKD ON VBKD~VBELN = VBAP~VBELN AND
        VBKD~POSNR = VBAP~POSNR
      INNER JOIN VBAK ON VBAK~VBELN = VBAP~VBELN
    INTO TABLE ITAB FOR ALL ENTRIES IN ITAB0
    WHERE VBAP~VBELN = ITAB0-VBELN AND VBAP~MATNR IN S_MATNR AND
      VBAP~ERDAT IN S_ERDAT AND VBAP~PRCTR IN S_PRCTR AND
      VBAP~ABGRU = SPACE AND VBKD~BZIRK IN S_BZIRK AND
      VBAK~VKORG IN S_VKORG AND VBAK~VTWEG IN S_VTWEG AND
      VBAK~SPART IN S_SPART AND VBAK~KUNNR IN S_KUNNR AND
      VBAK~ERNAM IN S_ERNAM.
IF SY-SUBRC <> 0.
    WRITE: /1 'No data found for selection'.
    STOP.
ENDIF.
loop thru SO items
LOOP AT ITAB.
get ship-to customer
    IF NOT S_KUNWE IS INITIAL.
      CLEAR TVBPA.
      READ TABLE TVBPA WITH TABLE KEY VBELN = ITAB-VBELN
        POSNR = ITAB-POSNR PARVW = 'WE'.
      IF SY-SUBRC <> 0.
        READ TABLE TVBPA WITH TABLE KEY VBELN = ITAB-VBELN
          POSNR = '000000' PARVW = 'WE'.
      ENDIF.
      MOVE TVBPA-KUNNR TO ITAB-KUNWE.
    ELSE.
      CLEAR ITAB-KUNWE.
      SELECT SINGLE KUNNR FROM VBPA INTO ITAB-KUNWE
        WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
          PARVW = 'WE'.
      IF SY-SUBRC <> 0.
        SELECT SINGLE KUNNR FROM VBPA INTO ITAB-KUNWE
          WHERE VBELN = ITAB-VBELN AND POSNR = '000000' AND
            PARVW = 'WE'.
      ENDIF.
    ENDIF.
    IF NOT ITAB-KUNWE IN S_KUNWE.
      DELETE ITAB.
      CONTINUE.
    ENDIF.
get ship-to customer address info
    SELECT SINGLE NAME1 ORT01 REGIO LAND1 FROM KNA1
      INTO (ITAB-NAME1, ITAB-ORT01, ITAB-REGIO, ITAB-LAND1)
      WHERE KUNNR = ITAB-KUNWE.
    MODIFY ITAB.
ENDLOOP.
SORT ITAB BY VBELN POSNR.
ENDFORM.
FORM 200_GET_NO_DELIVERY
get detail for SO items w/ no deliveries for order document types
(ZZOR, ZZC1, ZZCO, ZZRP, ZZRW, KE, KR, ZCHP, ZPSO, ZZNC)
FORM 200_GET_NO_DELIVERY.
LOOP AT ITAB WHERE AUART = 'ZZOR' OR AUART = 'ZZC1' OR
    AUART = 'ZZCO' OR AUART = 'ZZRP' OR AUART = 'ZZRW' OR
    AUART = 'KE' OR AUART = 'KR' OR AUART = 'ZCHP' OR
    AUART = 'ZPSO' OR AUART = 'ZZNC'.
select if delivery status = A (not delivered)
    IF ITAB-LFGSA = 'A'.
assign values to detail fields
      CLEAR ITAB1.
      ITAB1-KUNNR = ITAB-KUNNR.
      ITAB1-KUNWE = ITAB-KUNWE.
      ITAB1-VBELN = ITAB-VBELN.
      ITAB1-POSNR = ITAB-POSNR.
      IF ITAB-KURSK = 0.
        ITAB-KURSK = 1.
      ENDIF.
      IF ITAB-KPEIN = 0.
        ITAB-KPEIN = 1.
      ENDIF.
select schedule lines for SO item and write to internal table itab2a
      SELECT WADAT VBELN POSNR WMENG BMENG
        FROM VBEP INTO TABLE ITAB2A
        WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR.
select sched lines w/request date and write to internal table itab2b
      SELECT EDATU VBELN POSNR WMENG
        FROM VBEP INTO TABLE ITAB2B
        WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
          WMENG <> 0.
select sched lines w/commit date and write to internal table itab2c
      SELECT EDATU VBELN POSNR ROMS1
        FROM VBEP INTO TABLE ITAB2C
        WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
          ROMS1 <> 0.
      SORT ITAB2A BY WADAT.
      SORT ITAB2B BY EDATU.
      SORT ITAB2C BY EDATU.
      ORDR_QTY = 0.
      CONF_QTY = 0.
      NOCONF_QTY = 0.
calculate the unconfirmed qty for a SO item
      LOOP AT ITAB2A.
        CONF_QTY = CONF_QTY + ITAB2A-BMENG.
        ORDR_QTY = ORDR_QTY + ITAB2A-WMENG.
      ENDLOOP.
      NOCONF_QTY = ORDR_QTY - CONF_QTY.
      LOOP AT ITAB2A WHERE BMENG <> 0.
        PERFORM GET_REQUEST_DATE TABLES ITAB2B
          USING ITAB2A-BMENG REQ_DATE.
        PERFORM GET_COMMIT_DATE TABLES ITAB2C
          USING ITAB2A-BMENG COM_DATE.
        ITAB1-ZDATE1 = REQ_DATE.
        ITAB1-ZDATE2 = ITAB2A-WADAT.
        ITAB1-ZDATE3 = COM_DATE.
        ITAB1-ZQTY1 = ITAB-KWMENG.
        ITAB1-ZQTY2 = ITAB2A-BMENG.
        ITAB1-ZDESC = 'no delivery, confirmed'.
calculate net value for backlog qty
        ZPRICE = ( ITAB-NETPR / ITAB-KPEIN ) * ITAB-KURSK.
        ITAB1-ZEXTD = ITAB1-ZQTY2 * ZPRICE.
if order type is consignment return (KR), reverse sign
        IF ITAB-AUART = 'KR'.
          ITAB1-ZQTY1 = ITAB1-ZQTY1 * -1.
          ITAB1-ZQTY2 = ITAB1-ZQTY2 * -1.
          ITAB1-ZEXTD = ITAB1-ZEXTD * -1.
        ENDIF.
        APPEND ITAB1.
      ENDLOOP.
get request date for SO item
      IF NOCONF_QTY <> 0.
        PERFORM GET_REQUEST_DATE TABLES ITAB2B
          USING NOCONF_QTY REQ_DATE.
        PERFORM GET_COMMIT_DATE TABLES ITAB2C
          USING NOCONF_QTY COM_DATE.
        ITAB1-ZDATE1 = REQ_DATE.
        ITAB1-ZDATE2 = '99991231'.
        ITAB1-ZDATE3 = COM_DATE.
        ITAB1-ZQTY1 = ITAB-KWMENG.
        ITAB1-ZQTY2 = NOCONF_QTY.
        ITAB1-ZDESC = 'no delivery, not confirmed'.
calculate net value for backlog qty
        ZPRICE = ( ITAB-NETPR / ITAB-KPEIN ) * ITAB-KURSK.
        ITAB1-ZEXTD = ITAB1-ZQTY2 * ZPRICE.
if order type is consignment return (KR), reverse sign
        IF ITAB-AUART = 'KR'.
          ITAB1-ZQTY1 = ITAB1-ZQTY1 * -1.
          ITAB1-ZQTY2 = ITAB1-ZQTY2 * -1.
          ITAB1-ZEXTD = ITAB1-ZEXTD * -1.
        ENDIF.
        APPEND ITAB1.
      ENDIF.
    ENDIF.
ENDLOOP.
ENDFORM.
FORM 300_GET_NO_GOODS_ISSUE
get detail for SO items w/deliveries and no goods issue for
doc types (ZZOR, ZZC1, ZZCO, ZZRP, ZZRW, KE, KR, ZCHP, ZPSO, ZZNC)
FORM 300_GET_NO_GOODS_ISSUE.
get detail for deliveries w/no goods issue
SELECT VBELN WADAT WADAT_IST ERDAT ERZET
    FROM LIKP INTO (LIKP-VBELN, LIKP-WADAT, LIKP-WADAT_IST,
      LIKP-ERDAT, LIKP-ERZET)
    WHERE WADAT_IST = 0.
select if actual qty delivered <> 0
    CLEAR LIPS.
    SELECT POSNR VGBEL VGPOS LFIMG
      FROM LIPS INTO (LIPS-POSNR, LIPS-VGBEL, LIPS-VGPOS, LIPS-LFIMG)
      WHERE VBELN = LIKP-VBELN AND LFIMG <> 0.
select if goods movement status on delivery = A (no goods issue)
      CLEAR VBUP.
      SELECT SINGLE WBSTA FROM VBUP INTO VBUP-WBSTA
        WHERE VBELN = LIKP-VBELN AND POSNR = LIPS-POSNR.
      IF VBUP-WBSTA = 'A'.
        CLEAR ITAB3.
        ITAB3-VGBEL = LIPS-VGBEL.
        ITAB3-VGPOS = LIPS-VGPOS.
        ITAB3-VBELN = LIKP-VBELN.
        ITAB3-POSNR = LIPS-POSNR.
        ITAB3-WADAT = LIKP-WADAT.
        ITAB3-WADAT_IST = LIKP-WADAT_IST.
        ITAB3-LFIMG = LIPS-LFIMG.
        ITAB3-ERDAT = LIKP-ERDAT.
        ITAB3-ERZET = LIKP-ERZET.
        APPEND ITAB3.
      ENDIF.
    ENDSELECT.
ENDSELECT.
SORT ITAB3 BY VGBEL VGPOS VBELN POSNR.
loop thru deliveries w/no goods issue and get SO item detail
LOOP AT ITAB3.
    CLEAR ITAB.
    READ TABLE ITAB WITH KEY VBELN = ITAB3-VGBEL POSNR = ITAB3-VGPOS.
    IF SY-SUBRC <> 0.
      IF ITAB-AUART = 'ZZOR' OR ITAB-AUART = 'ZZC1' OR
        ITAB-AUART = 'ZZCO' OR ITAB-AUART = 'ZZRP' OR
        ITAB-AUART = 'ZZRW' OR ITAB-AUART = 'KE' OR
        ITAB-AUART = 'KR' OR ITAB-AUART = 'ZCHP' OR
        ITAB-AUART = 'ZPSO' OR ITAB-AUART = 'ZZNC'.
assign values to detail fields
        CLEAR ITAB1.
        ITAB1-KUNNR = ITAB-KUNNR.
        ITAB1-KUNWE = ITAB-KUNWE.
        ITAB1-VBELN = ITAB-VBELN.
        ITAB1-POSNR = ITAB-POSNR.
        IF ITAB-KURSK = 0.
          ITAB-KURSK = 1.
        ENDIF.
        IF ITAB-KPEIN = 0.
          ITAB-KPEIN = 1.
        ENDIF.
select delivery qty for SO item and write to internal table
        SELECT VBELV POSNV VBELN POSNN VBTYP_N RFMNG PLMIN
          FROM VBFA INTO TABLE ITAB4
          WHERE VBELV = ITAB-VBELN AND POSNV = ITAB-POSNR AND
            ( VBTYP_N = 'J' OR VBTYP_N = 'T' ).
calculate total delivery qty for SO item
        DELV_QTY = 0.
        DELV_QTY1 = 0.
        LOOP AT ITAB4.
          IF ITAB4-VBTYP_N = 'J' OR ( ITAB4-VBTYP_N = 'T' AND
              ITAB-AUART = 'KR').
            IF ITAB4-PLMIN = '-'.
              ITAB4-RFMNG = ITAB4-RFMNG * -1.
            ENDIF.
determine if delivery for SO item precedes delivery w/no goods
issue (to determine request date and qty)
            CLEAR LIKP.
            SELECT SINGLE ERDAT ERZET
              FROM LIKP INTO (LIKP-ERDAT, LIKP-ERZET)
              WHERE VBELN = ITAB4-VBELN.
            IF LIKP-ERDAT < ITAB3-ERDAT OR ( LIKP-ERDAT = ITAB3-ERDAT
                AND LIKP-ERZET < ITAB3-ERZET ).
              DELV_QTY1 = DELV_QTY1 + ITAB4-RFMNG.
            ENDIF.
            DELV_QTY = DELV_QTY + ITAB4-RFMNG.
          ENDIF.
        ENDLOOP.
get request dates for SO item
        REFRESH ITAB2B.
        SELECT EDATU VBELN POSNR WMENG
          FROM VBEP INTO TABLE ITAB2B
          WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
            WMENG <> 0.
select sched lines w/commit date and write to itab2c
        REFRESH ITAB2C.
        SELECT EDATU VBELN POSNR ROMS1
          FROM VBEP INTO TABLE ITAB2C
          WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
            ROMS1 <> 0.
        SORT ITAB2B BY EDATU.
        SORT ITAB2C BY EDATU.
loop thru request dates and delete request date entries for
quantity(s) for preceding deliveries
        REMAIN_QTY1 = DELV_QTY1.
        LOOP AT ITAB2B.
          IF ITAB2B-WMENG > REMAIN_QTY1.
            ITAB2B-WMENG = ITAB2B-WMENG - REMAIN_QTY1.
            MODIFY ITAB2B.
            EXIT.
          ELSEIF ITAB2B-WMENG = REMAIN_QTY1.
            DELETE ITAB2B.
            EXIT.
          ELSE.
            REMAIN_QTY1 = REMAIN_QTY1 - ITAB2B-WMENG.
            DELETE ITAB2B.
          ENDIF.
        ENDLOOP.
loop thru commit dates and delete commit date entries for
quantity(s) for preceding deliveries
        REMAIN_QTY2 = DELV_QTY1.
        LOOP AT ITAB2C.
          IF ITAB2C-ROMS1 > REMAIN_QTY2.
            ITAB2C-ROMS1 = ITAB2C-ROMS1 - REMAIN_QTY2.
            MODIFY ITAB2C.
            EXIT.
          ELSEIF ITAB2C-ROMS1 = REMAIN_QTY2.
            DELETE ITAB2C.
            EXIT.
          ELSE.
            REMAIN_QTY2 = REMAIN_QTY2 - ITAB2C-ROMS1.
            DELETE ITAB2C.
          ENDIF.
        ENDLOOP.
if planned goods issue date is 0, put qty in non-confirmed
get request date for SO item
        IF ITAB3-WADAT <> 0.
          PERFORM GET_REQUEST_DATE TABLES ITAB2B
            USING ITAB3-LFIMG REQ_DATE.
          PERFORM GET_COMMIT_DATE TABLES ITAB2C
            USING ITAB3-LFIMG COM_DATE.
          ITAB1-ZDATE1 = REQ_DATE.
          ITAB1-ZDATE2 = ITAB3-WADAT.
          ITAB1-ZDATE3 = COM_DATE.
          ITAB1-ZQTY1 = ITAB-KWMENG.
          ITAB1-ZQTY2 = ITAB3-LFIMG.
          ITAB1-ZDESC = 'delivery, no goods issue'.
        ELSE.
          PERFORM GET_REQUEST_DATE TABLES ITAB2B
            USING ITAB3-LFIMG REQ_DATE.
          PERFORM GET_COMMIT_DATE TABLES ITAB2C
            USING ITAB3-LFIMG COM_DATE.
          ITAB1-ZDATE1 = REQ_DATE.
          ITAB1-ZDATE2 = '99991231'.
          ITAB1-ZDATE3 = COM_DATE.
          ITAB1-ZQTY1 = ITAB-KWMENG.
          ITAB1-ZQTY2 = ITAB3-LFIMG.
          ITAB1-ZDESC = 'delivery, no goods issue date'.
        ENDIF.
calculate net value for backlog qty
        ZPRICE = ( ITAB-NETPR / ITAB-KPEIN ) * ITAB-KURSK.
        ITAB1-ZEXTD = ITAB1-ZQTY2 * ZPRICE.
if order type is consignment return (KR), reverse sign
        IF ITAB-AUART = 'KR'.
          ITAB1-ZQTY1 = ITAB1-ZQTY1 * -1.
          ITAB1-ZQTY2 = ITAB1-ZQTY2 * -1.
          ITAB1-ZEXTD = ITAB1-ZEXTD * -1.
        ENDIF.
        APPEND ITAB1.
      ENDIF.
    ENDIF.
ENDLOOP.
ENDFORM.
FORM 400_GET_PARTIAL_DELIVERY
get detail for SO items w/partial deliveries for document types
(ZZOR, ZZC1, ZZCO, ZZRP, ZZRW, KE, KR, ZCHP, ZPSO, ZZNC)
FORM 400_GET_PARTIAL_DELIVERY.
process SO items for selected order types
LOOP AT ITAB WHERE AUART = 'ZZOR' OR AUART = 'ZZC1' OR
      AUART = 'ZZCO' OR AUART = 'ZZRP' OR AUART = 'ZZRW' OR
      AUART = 'KE' OR AUART = 'KR' OR AUART = 'ZCHP' OR
      AUART = 'ZPSO' OR AUART = 'ZZNC'.
select if delivery status = B (partially delivered)
    IF ITAB-LFGSA = 'B'.
assign values to detail fields
      CLEAR ITAB1.
      ITAB1-KUNNR = ITAB-KUNNR.
      ITAB1-KUNWE = ITAB-KUNWE.
      ITAB1-VBELN = ITAB-VBELN.
      ITAB1-POSNR = ITAB-POSNR.
      IF ITAB-KURSK = 0.
        ITAB-KURSK = 1.
      ENDIF.
      IF ITAB-KPEIN = 0.
        ITAB-KPEIN = 1.
      ENDIF.
select delivery qty for SO item and write to internal table
      SELECT VBELV POSNV VBELN POSNN VBTYP_N RFMNG PLMIN
        FROM VBFA INTO TABLE ITAB4
        WHERE VBELV = ITAB-VBELN AND POSNV = ITAB-POSNR AND
          ( VBTYP_N = 'J' OR VBTYP_N = 'T' ).
calculate total delivery qty for SO item
      DELV_QTY = 0.
      LOOP AT ITAB4.
        IF ITAB4-VBTYP_N = 'J' OR ( ITAB4-VBTYP_N = 'T' AND
            ITAB-AUART = 'KR').
          IF ITAB4-PLMIN = '-'.
            ITAB4-RFMNG = ITAB4-RFMNG * -1.
          ENDIF.
          DELV_QTY = DELV_QTY + ITAB4-RFMNG.
        ENDIF.
      ENDLOOP.
select schedule lines for SO item and write to internal table
      REFRESH ITAB2A.
      SELECT WADAT VBELN POSNR WMENG BMENG
        FROM VBEP INTO TABLE ITAB2A
        WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR.
get request dates from schedule line table
      REFRESH ITAB2B.
      SELECT EDATU VBELN POSNR WMENG
        FROM VBEP INTO TABLE ITAB2B
        WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
          WMENG <> 0.
get commit dates from schedule line table
      REFRESH ITAB2C.
      SELECT EDATU VBELN POSNR ROMS1
        FROM VBEP INTO TABLE ITAB2C
        WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
          ROMS1 <> 0.
      SORT ITAB2B BY EDATU.
      SORT ITAB2C BY EDATU.
      SORT ITAB2A BY WADAT.
loop thru request dates and delete request date entries for
quantity(s) already delivered
      REMAIN_QTY1 = DELV_QTY.
      LOOP AT ITAB2B.
        IF ITAB2B-WMENG > REMAIN_QTY1.
          ITAB2B-WMENG = ITAB2B-WMENG - REMAIN_QTY1.
          MODIFY ITAB2B.
          EXIT.
        ELSEIF ITAB2B-WMENG = REMAIN_QTY1.
          DELETE ITAB2B.
          EXIT.
        ELSE.
          REMAIN_QTY1 = REMAIN_QTY1 - ITAB2B-WMENG.
          DELETE ITAB2B.
        ENDIF.
      ENDLOOP.
loop thru commit dates and delete request date entries for
quantity(s) already delivered
      REMAIN_QTY2 = DELV_QTY.
      LOOP AT ITAB2C.
        IF ITAB2C-ROMS1 > REMAIN_QTY2.
          ITAB2C-ROMS1 = ITAB2C-ROMS1 - REMAIN_QTY2.
          MODIFY ITAB2C.
          EXIT.
        ELSEIF ITAB2C-ROMS1 = REMAIN_QTY2.
          DELETE ITAB2C.
          EXIT.
        ELSE.
          REMAIN_QTY2 = REMAIN_QTY2 - ITAB2C-ROMS1.
          DELETE ITAB2C.
        ENDIF.
      ENDLOOP.
       ORDR_QTY = 0.
       CONF_QTY = 0.
       NOCONF_QTY = 0.
calculate the unconfirmed qty for SO item
      LOOP AT ITAB2A.
        ORDR_QTY = ORDR_QTY + ITAB2A-WMENG.
        CONF_QTY = CONF_QTY + ITAB2A-BMENG.
      ENDLOOP.
      NOCONF_QTY = ORDR_QTY - CONF_QTY.
      NODELV_QTY = ORDR_QTY - DELV_QTY.
loop thru schedule lines and process entries with no related
delivery(s)
      REMAIN_QTY = DELV_QTY.
      LOOP AT ITAB2A.
        IF ITAB2A-BMENG <> 0.
          IF ITAB2A-BMENG <= REMAIN_QTY.
            REMAIN_QTY = REMAIN_QTY - ITAB2A-BMENG.
          ELSE.
            ITAB2A-BMENG = ITAB2A-BMENG - REMAIN_QTY.
            PERFORM GET_REQUEST_DATE TABLES ITAB2B
              USING ITAB2A-BMENG REQ_DATE.
            PERFORM GET_COMMIT_DATE TABLES ITAB2C
              USING ITAB2A-BMENG COM_DATE.
            ITAB1-ZDATE1 = REQ_DATE.
            ITAB1-ZDATE2 = ITAB2A-WADAT.
            ITAB1-ZDATE3 = COM_DATE.
            ITAB1-ZQTY1 = ITAB-KWMENG.
            ITAB1-ZQTY2 = ITAB2A-BMENG.
            ITAB1-ZDESC = 'partial delivery'.
calculate net value for backlog qty
            ZPRICE = ( ITAB-NETPR / ITAB-KPEIN ) * ITAB-KURSK.
            ITAB1-ZEXTD = ITAB1-ZQTY2 * ZPRICE.
if order type is consignment return (KR), reverse sign
            IF ITAB-AUART = 'KR'.
              ITAB1-ZQTY1 = ITAB1-ZQTY1 * -1.
              ITAB1-ZQTY2 = ITAB1-ZQTY2 * -1.
              ITAB1-ZEXTD = ITAB1-ZEXTD * -1.
            ENDIF.
            APPEND ITAB1.
            REMAIN_QTY = 0.
          ENDIF.
        ENDIF.
      ENDLOOP.
if total unconfirmed >= total not delivered, qty is unconfirmed
      IF NOCONF_QTY >= NODELV_QTY.
        PERFORM GET_REQUEST_DATE TABLES ITAB2B
          USING NODELV_QTY REQ_DATE.
        PERFORM GET_COMMIT_DATE TABLES ITAB2C
          USING NODELV_QTY COM_DATE.
        ITAB1-ZDATE1 = REQ_DATE.
        ITAB1-ZDATE2 = '99991231'.
        ITAB1-ZDATE3 = COM_DATE.
        ITAB1-ZQTY1 = ITAB-KWMENG.
        ITAB1-ZQTY2 = NODELV_QTY.
        ITAB1-ZDESC = 'partial delv, not confirmed'.
calculate net value for backlog qty
        ZPRICE = ( ITAB-NETPR / ITAB-KPEIN ) * ITAB-KURSK.
        ITAB1-ZEXTD = ITAB1-ZQTY2 * ZPRICE.
if order type is consignment return (KR), reverse sign
        IF ITAB-AUART = 'KR'.
          ITAB1-ZQTY1 = ITAB1-ZQTY1 * -1.
          ITAB1-ZQTY2 = ITAB1-ZQTY2 * -1.
          ITAB1-ZEXTD = ITAB1-ZEXTD * -1.
        ENDIF.
        APPEND ITAB1.
      ENDIF.
    ENDIF.
ENDLOOP.
ENDFORM.
FORM 500_GET_THIRD_PARTY
get detail for third party SO items
FORM 500_GET_THIRD_PARTY.
process SO items for selected order types
LOOP AT ITAB WHERE PSTYV = 'TAS' AND ( AUART = 'ZZOR' OR
    AUART = 'ZZC1' OR AUART = 'ZZCO' OR AUART = 'ZZRP' OR
    AUART = 'ZZRW' OR AUART = 'KE' OR AUART = 'KR' OR
    AUART = 'ZCHP' OR AUART = 'ZPSO' OR AUART = 'ZZNC' ).
select if billing status <> C (billed)
    IF ITAB-FKSAA <> 'C'.
assign values to detail fields
      CLEAR ITAB1.
      ITAB1-KUNNR = ITAB-KUNNR.
      ITAB1-KUNWE = ITAB-KUNWE.
      ITAB1-VBELN = ITAB-VBELN.
      ITAB1-POSNR = ITAB-POSNR.
      IF ITAB-KURSK = 0.
        ITAB-KURSK = 1.
      ENDIF.
      IF ITAB-KPEIN = 0.
        ITAB-KPEIN = 1.
      ENDIF.
get request dates from schedule line table
      REFRESH ITAB2B.
      SELECT EDATU VBELN POSNR WMENG
        FROM VBEP INTO TABLE ITAB2B
        WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
          WMENG <> 0.
get commit dates from schedule line table
      REFRESH ITAB2C.
      SELECT EDATU VBELN POSNR ROMS1
        FROM VBEP INTO TABLE ITAB2C
        WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
          ROMS1 <> 0.
      SORT ITAB2B BY EDATU.
      SORT ITAB2C BY EDATU.
get PO number(s) for SO item and write to internal table
      REFRESH ITAB4.
      SELECT VBELV POSNV VBELN POSNN VBTYP_N RFMNG PLMIN
        FROM VBFA INTO TABLE ITAB4
        WHERE VBELV = ITAB-VBELN AND POSNV = ITAB-POSNR AND
          VBTYP_N = 'V' AND RFMNG <> 0.
calculate total delivery qty for PO item
      DELV_QTY = 0.
      LOOP AT ITAB4.
        IF ITAB4-PLMIN = '-'.
          ITAB4-RFMNG = ITAB4-RFMNG * -1.
        ENDIF.
        DELV_QTY = DELV_QTY + ITAB4-RFMNG.
      ENDLOOP.
loop thru PO's for SO item
      LOOP AT ITAB4.
select delivery lines for PO item
        SELECT EINDT EBELN EBELP MENGE FROM EKET
          INTO (EKET-EINDT, EKET-EBELN, EKET-EBELP, EKET-MENGE)
          WHERE EBELN = ITAB4-VBELN AND EBELP = ITAB4-POSNN.
          PERFORM GET_REQUEST_DATE TABLES ITAB2B
            USING EKET-MENGE REQ_DATE.
          PERFORM GET_COMMIT_DATE TABLES ITAB2C
            USING EKET-MENGE COM_DATE.
          ITAB1-ZDATE1 = REQ_DATE.
          ITAB1-ZDATE2 = EKET-EINDT.
          ITAB1-ZDATE3 = COM_DATE.
          ITAB1-ZQTY1 = ITAB-KWMENG.
          ITAB1-ZQTY2 = EKET-MENGE.
          ITAB1-ZDESC = '3rd party item'.
calculate net value for backlog qty
          ZPRICE = ( ITAB-NETPR / ITAB-KPEIN ) * ITAB-KURSK.
          ITAB1-ZEXTD = ITAB1-ZQTY2 * ZPRICE.
          APPEND ITAB1.
        ENDSELECT.
      ENDLOOP.
if total delivery qty < order qty, put remaining in non-confirmed
      IF DELV_QTY < ITAB-KWMENG.
        THIRD_QTY = ITAB-KWMENG - DELV_QTY.
        PERFORM GET_REQUEST_DATE TABLES ITAB2B
          USING THIRD_QTY REQ_DATE.
        PERFORM GET_COMMIT_DATE TABLES ITAB2C
          USING THIRD_QTY COM_DATE.
        ITAB1-ZDATE1 = REQ_DATE.
        ITAB1-ZDATE2 = '99991231'.
        ITAB1-ZDATE2 = COM_DATE.
        ITAB1-ZQTY1 = ITAB-KWMENG.
        ITAB1-ZQTY2 = THIRD_QTY.
        ITAB1-ZDESC = '3rd party item, no PO'.
calculate net value for backlog qty
        ZPRICE = ( ITAB-NETPR / ITAB-KPEIN ) * ITAB-KURSK.
        ITAB1-ZEXTD = ITAB1-ZQTY2 * ZPRICE.
        APPEND ITAB1.
        CONTINUE.
      ENDIF.
    ENDIF.
ENDLOOP.
ENDFORM.
FORM 900_CREATE_LIST
process open business detail and create list
FORM 900_CREATE_LIST.
if internal table is empty, write message and exit
    DESCRIBE TABLE ITAB1 LINES ZCNTR.
    IF ZCNTR = 0.
      WRITE: / 'No Data Found for Selection'.
      STOP.
    ENDIF.
    SORT ITAB1 BY KUNNR KUNWE VBELN POSNR.
loop thru sorted table and create list
    LOOP AT ITAB1.
      IF ITAB1-ZDATE1 = SPACE.
        ITAB1-ZDATE1 = '99991231'.
      ENDIF.
      IF ITAB1-ZDATE3 = SPACE.
        ITAB1-ZDATE3 = '99991231'.
      ENDIF.
get SO item detail
      CLEAR ITAB.
      READ TABLE ITAB WITH KEY VBELN = ITAB1-VBELN
                               POSNR = ITAB1-POSNR BINARY SEARCH.
print sold-to and ship-to customer header info
      AT NEW KUNWE.
        CLEAR KNA1.
        SELECT SINGLE NAME1 FROM KNA1 INTO KNA1-NAME1
          WHERE KUNNR = ITAB1-KUNNR.
        CONCATENATE ITAB-ORT01 ITAB-REGIO INTO ADRS1 SEPARATED BY ', '.
        CONCATENATE ADRS1 ITAB-LAND1 INTO ADRS2 SEPARATED BY '   '.
        CONCATENATE ITAB-NAME1 ADRS2 INTO ADRS3 SEPARATED BY '   '.
        FORMAT COLOR 1 INTENSIFIED OFF.
        WRITE: /1 'Sold-to:', 10 ITAB1-KUNNR, 18 KNA1-NAME1,
          56 'Ship-to:', 65 ITAB1-KUNWE, 73 ADRS3.
        FORMAT RESET.
        SKIP.
      ENDAT.
print out backlog detail
      CLEAR T171T.
      SELECT SINGLE BZTXT FROM T171T INTO T171T-BZTXT
        WHERE SPRAS = SY-LANGU AND BZIRK = ITAB-BZIRK.
      WRITE: /1 ITAB1-VBELN,
        13(6) ITAB1-POSNR NO-ZERO,
        21 ITAB-MATNR,
        41 ITAB-ARKTX,
        83 ITAB1-ZDATE1,
        95 ITAB1-ZDATE3,
        107 ITAB1-ZDATE2,
        119 ITAB-ERNAM,
        129 ITAB-BZIRK, 135 T171T-BZTXT,
        157(20) ITAB-BSTKD,
        179(12) ITAB1-ZQTY1 DECIMALS 0,
        193(12) ITAB1-ZQTY2 DECIMALS 0,
        207(16) ITAB1-ZEXTD DECIMALS 2,
        225 ITAB1-ZDESC.
      AT END OF VBELN.
        SKIP.
      ENDAT.
print footing at ship-to customer
      AT END OF KUNWE.
        SUM.
        ULINE: /193(12), 207(16).
        FORMAT COLOR 1 INTENSIFIED OFF.
        WRITE: /1 'Total: Sold-to:', 18 ITAB1-KUNNR,
          25 '/', 27 'Ship-to:', 36 ITAB1-KUNWE,
          193(12) ITAB1-ZQTY2 DECIMALS 0,
          207(16) ITAB1-ZEXTD DECIMALS 2.
        FORMAT RESET.
        SKIP 2.
      ENDAT.
      AT LAST.
        SUM.
        ULINE: /193(12), 207(16).
        FORMAT COLOR 1 INTENSIFIED ON.
        WRITE: /1 'Report Total:',
          193(12) ITAB1-ZQTY2 DECIMALS 0,
          207(16) ITAB1-ZEXTD DECIMALS 2.
        FORMAT RESET.
      ENDAT.
    ENDLOOP.
ENDFORM.
FORM GET_REQUEST_DATE
subroutine to get request date for SO item
FORM GET_REQUEST_DATE TABLES FTAB STRUCTURE ITAB2B
                      USING CONF_QTY REQ_DATE.
DATA: REMAIN LIKE VBEP-WMENG,                 "qty remaining
      CNTR TYPE I,                            "loop counter
      TAB_INDEX TYPE I.                       "table index
initialize
REMAIN = 0.
REQ_DATE = SPACE.
get first request date from table
TAB_INDEX = 1.
READ TABLE FTAB INDEX TAB_INDEX.
if request date not found, set request date to blank
IF SY-SUBRC <> 0.
    REQ_DATE = SPACE.
    EXIT.
ELSE.
    REQ_DATE = FTAB-EDATU.
ENDIF.
calculate quantity remaining for request date
REMAIN = FTAB-WMENG - CONF_QTY.
if qty remaining > 0, update request date with qty remaining
IF REMAIN > 0.
    FTAB-WMENG = REMAIN.
    MODIFY FTAB INDEX TAB_INDEX.
if qty remaining = 0, delete request date (so next request
date will be used for next confirmed qty)
ELSEIF REMAIN = 0.
    DELETE FTAB INDEX TAB_INDEX.
if qty remaining < 0, find next request date and update
ELSE.
    CNTR = 0.
    WHILE REMAIN < 0 OR CNTR < 10.
      DELETE FTAB INDEX TAB_INDEX.
      TAB_INDEX = TAB_INDEX + 1.
      READ TABLE FTAB INDEX TAB_INDEX.
      REMAIN = REMAIN + FTAB-WMENG.
      CNTR = CNTR + 1.
    ENDWHILE.
    IF REMAIN = 0.
      DELETE FTAB INDEX TAB_INDEX.
    ELSEIF REMAIN > 0.
      FTAB-WMENG = REMAIN.
      MODIFY FTAB INDEX TAB_INDEX.
    ENDIF.
ENDIF.
ENDFORM.
FORM GET_COMMIT_DATE
subroutine to get commit date for SO item
FORM GET_COMMIT_DATE TABLES CTAB STRUCTURE ITAB2C
                      USING CONF_QTY COM_DATE.
DATA: REMAIN LIKE VBEP-WMENG,                 "qty remaining
      CNTR TYPE I,                            "loop counter
      TAB_INDEX TYPE I.                       "table index
initialize
REMAIN = 0.
COM_DATE = SPACE.
get first commit date from table
TAB_INDEX = 1.
READ TABLE CTAB INDEX TAB_INDEX.
if request date not found, set request date to blank
IF SY-SUBRC <> 0.
    COM_DATE = SPACE.
    EXIT.
ELSE.
    COM_DATE = CTAB-EDATU.
ENDIF.
calculate quantity remaining for request date
REMAIN = CTAB-ROMS1 - CONF_QTY.
if qty remaining > 0, update request date with qty remaining
IF REMAIN > 0.
    CTAB-ROMS1 = REMAIN.
    MODIFY CTAB INDEX TAB_INDEX.
if qty remaining = 0, delete request date (so next request
date will be used for next confirmed qty)
ELSEIF REMAIN = 0.
    DELETE CTAB INDEX TAB_INDEX.
if qty remaining < 0, find next request date and update
ELSE.
    CNTR = 0.
    WHILE REMAIN < 0 OR CNTR < 10.
      DELETE CTAB INDEX TAB_INDEX.
      TAB_INDEX = TAB_INDEX + 1.
      READ TABLE CTAB INDEX TAB_INDEX.
      REMAIN = REMAIN + CTAB-ROMS1.
      CNTR = CNTR + 1.
    ENDWHILE.
    IF REMAIN = 0.
      DELETE CTAB INDEX TAB_INDEX.
    ELSEIF REMAIN > 0.
      CTAB-ROMS1 = REMAIN.
      MODIFY CTAB INDEX TAB_INDEX.
    ENDIF.
ENDIF.
ENDFORM.
END-OF-REPORT.

How to get the back order quantity for sales Order

Hi Friends,
I want to get the back order quantity for sales order . in MD04 t-code,
there is a field(MDEZ-MNG01) for Received Qty/ Required qty. But MDEZ is a structure.
I tried from MDTB table, but the table is not updated with the values in MD04.
Please guide me from which table I can get the back order Qty for sales Order
(ref: t-code MD04, MRP element = CusOrd).
Thanks,
Sagar

>
VIdya Sagar wrote:
> Hi,
>
> Isn't there any difference b/n Open Sales Order and Back order??
Yes Quite Difference.
Read:
http://www.sap-img.com/sap-sd/explain-the-meaning-of-an-open-sales-order.htm
http://help.sap.com/saphelp_sbo2005asp1/helpdata/en/b6/bdb9b2f02842348c9edbe78af863c4/content.htm

How To Get The Total Delivered Quantity of a Sales Order

Hello All,
I have a requirement of getting the total delivery quantity of the sales order .I have checked it in LIps table but I am getting partially delivered quantity for a schedule line item.Can any one tell me how to get the total delivered quantity.
Regards,
Pavani.

Hi
Check the Table:
VBEP - Sales Document: Schedule Line Data.
Inside the table check the Quantity Fields.
Regards,
Sreeram

FM to get the free good quantity for an item.

Hi alll,
I need to populate freegood quantity to ipc. How can i get the free good quantity configured for an item ?.
Thanks and Regards
shanto aloor

I am not sure wht is your requirement...but you can check FM - CRM_ORDER_MAINTAIN for this.

User wants to get the cumulative values based on his input.

Hi
I am working one FI Report; the out put values are Cumulative values for Current, Previous years. I developed and it fetches the data last 3 years Cumulative years data without any input FYMonth based on SAPexits and varible offsets. But user wants to put Fiscal year Month as input. So he wants get the cumulative values based on his input. For example, If his input SEP'2005(062005), Then Query gives the Output Cumulative Value (I.e., Sum of Total values of Form APR'2005 to SEP'2005)
Please provide the solution
Thanks
Mannev

Mannev,
You can try doing this.
1. If the user input is fiscal period(2005006) , you can create a customer exit variable which will take the user value (i_step =2), and change the variable value to 20005001. (this is a simple code where tye last 2 digits are replaced by 01).
if the user is entering calmonth, you can use FM - DATE_TO_PERIOD_CONVERT, to convert the month to fiscal period.
2. You can create a rkf with restrictions on time char based on the customer exit variable and the user entered variable.
-Saket

Schedule line not getting confirmed despite ATP quantity available

Hi friend,
I have a created a order for which schedule line of a particular material is not getting confirmed.
I checked the stock in co09 ATP quantity is available, MD04 has allocated stock to my order.
In our project specific scenario storage loc is not determined at order level. I also tried adding storage loc at shipping tab and did re atp but no use.
My scope of check includes reservations, sales requirement, deliveries.
If I use another materials which is similar to my above example stcok is getting confirmed but only that particular above material is not getting confirmed.
Am I missing any thing please suggest.

hi,
please check,
STOCK IS GETTING RESERVED AGAINST THE STORAGE LOCATION or NOT.
please check and confirm
balajia

To get the Cumulative

Hi,
I have a report, where i have a column with number type. I want to print the cumulative of the value i.e. existing number column, as another column, in the report. Can anyone help me in this?
Thanks in Advance.
- Gayathri.

Hi,
Create one summary column and place it in same group as your source, but reset at property shall be set to report, now print this summary column in same frame as number. This will give you cummulative report.
Adinath Kamode
9822311395

Query to get the Cumulative salary from EMP

SQL query to find out cumulative salary.
EX:
EMPNO ENAME SAL CUMSAL
1 AAAA 1500 1500
2 BBBB 1000 2500
3 CCCC 1250 3750

Hi Madhan,
If you talking abt query to find the total sal of each employee i.e., SAL + CUMSAL then you can use the below query:
select a.empno,a.ename,a.sal + b.cumsal totalsal from
emp a, emp b
where a.empno = b.empno;
Regards,
Murali Mohan

Runtime Structure to get the Control Record

Requirement:
Populating the extended segments of standard IDOC ORDERS through user-exit.(During PO creation for Outbound)
I want to apply a check on the extension type.
Problem:
Existing solution in 4.7 have a condition like
If EDIDC-CIMTYP = extension....
Endif.
But the same in ECC 6.0 is not working. EDIDC doea not have any data.
Please help in urgent.

What is the function module exit name?
Regards,
Ravi

How to get the Cumulative Sales Value ?

Hello All,
I want to extract the data from sap tables which is related to Sales. that is also in 5 ways
1. Company
2. Vertical(Corporate)
3. Sales men
4. Customer
5. Region
Again these each five have 3 formats those are Monthly and Quarterly and Yearly applicable to all five.
I did not understand this where should we start and how to extract that data.
if any one knows about this please try to help me in this
Thanks in advance

Hello All,
I also created one workflow which is client initiated and in the SCC(Sybase Control Center) created a user and installed the
workflow.apk and SybaseDataProvider.apk in to my Android Emulator and given the credentials in Emulator which I given in SCC
But, still I am unable to connect to server. in the Android Emulator the ShowLog is showing :
"Waiting to Connect"
"Waiting to Connect"
"Communication Error"
"Disconnected From Server"
"Waiting To Connect"
I checked the log in SCC also there is no data at this time.
If any one have idea about this let me know.. It helps me alot
Thanks in Advance

My images are still in the catalog, but the Folder name has disappeared. I need to get the folder back into my structure with the images in place

Help: I have a very well defined folder structure. Folder are located in a Master location and organized by State. Inside of these are my master RAW file folders organized by location. For example: West Virginia > BIRI_RAW_2012, BLFA_RAW_2013, NERI_RAW_2013, etc. After I set up the masterful following a shoot, I go to LR and import the images. At one time I inadvertently imported the NERI_RAW_2013 masterful set as a subset of something else and it was not appearing in my LR Module in the organization I prefer. So I went to my master folders on my drive and moved the NERI file into the West Virginia state folder. When I went back to LR, as expected the NERI folder was grey with a question mark. So I right clicked to find the files and relink, and it did not work. The folder name disappeared. The RAW files are still in the catalog and show up in a missing photos search. I can't reimport because they are already there. I just need to restore my folder structure and get the images back to the right spot.

So I right clicked to find the files and relink, and it did not work. The folder name disappeared.
It didn't disappear, it moved (because you told Lightroom to move it). It moved from the incorrect folder location, to the new folder location. Please look in the new folder, in whatever location it is in, not in the old folder and the old location, and you will find the photos.

How to get the current On-Hand Quantity of an item?

Hi,
I want to get the on-hand quantity of items from backend,
When i use the table mtl_onhand_quantities :
SELECT msi.segment1, msi.organization_id, SUM (moq.transaction_quantity)
FROM mtl_system_items_b msi, mtl_onhand_quantities moq
WHERE moq.organization_id(+) = msi.organization_id
AND moq.inventory_item_id(+) = msi.inventory_item_id
and moq.ORGANIZATION_ID = 1006
and msi.SEGMENT1 = '14003-0063'
GROUP BY msi.segment1, msi.organization_id
I get a quantity that is different than the one i get from front end. (On-Hand Quantity Screen)
The mtl_onhand_quantities shows quantities when received only , but it doesn't count the transactions done on the item.
How can i get the correct current on hand quantity of an item ?
Thanks,
Joe

I think you guys in this way are getting only the on hand quantity that we inserted when we first created the item...
I think we should also calculate whatever transactions happened on that item ..
i found this little program, please let me know if you think it's the correct way :
FUNCTION CF_LAST_BALFormula RETURN NUMBER IS
v_onhand_qty NUMBER;
v_last_qty NUMBER;
v_target_qty NUMBER;
BEGIN
SELECT SUM(transaction_quantity)
INTO v_onhand_qty
FROM mtl_onhand_quantities_detail
WHERE inventory_item_id = :inventory_item_id
AND organization_id = :organization_id
AND subinventory_code = :Subinventory;
SELECT NVL(SUM(Transaction_quantity),0)
INTO v_last_qty
FROM mtl_material_transactions
WHERE inventory_item_id = :inventory_item_id
AND organization_id = :organization_id
AND subinventory_code = :Subinventory
AND trunc(creation_date)>= :p_last_date;
v_target_qty:=(v_onhand_qty)-(v_last_qty);
RETURN( v_target_qty);
EXCEPTION
WHEN OTHERS THEN
RETURN 0;
END;

ATP quantity = 9.999.999.999,999

Hello Experts,
When I create sales order for material HAWA which is on stock location, system takes route schedule and in some cases create second schedule line u2013 in case the planned route schedule is for next day or later. Is such case Cumulative ATP quantity = 9.999.999.999,999. This happen only when Planned delivery. time (MPRII - MARC-PLIFZ) = 1, (it looks like Planned delivery time can not be bigger than confirmed delivery date from schedule line).
In SAP we use material type HAWA, Procurement type u201CFu201D - External procurement (MRPII), customers are assigned to u201Croute schedulesu201D u2013 (transaction VL53), and we are using RLT.
Do you know why system gives us ATP quantity = 9.999.999.999,999.?
Best regards,
Maciej

Dear Maciej,
Chk your material master MRP II tab page where check "IN house production" field if you mention zero days in this field , the system will propose you 9.99999999999 but if u mentioned 1 day i think this problem get sloved.plz chk
saurabh

How to get the item stock for a date

Hi all
I need to get the item stock quantity on a date, but i don´t know if i can get it from a table or if i have to make a query to calculate it from the documents´lines. If you can help me please reply this post.
Thanks

Do you already know of table OINM (Warehouse table) - it is not documented in SAP-BO references?
This table contains entries for each movement in stocks of your system. Here are some examples of fields in this table:
BASE_REF document number of document affecting OITW.OnHand
DocDate      date of this document
ItemCode     Item of which the stock quantity is changed
Dscription    name of item
Warehouse affected stock
InQty       number of items added into stock (OITW.OnHand is increased)
OutQty       number of items taken from stock (OITW.OnHand is decreased)
TransType   type of booking (see below)
Balance      this is NOT the OITW.OnHand at the date of this booking;
                  it's something like the cumulated stock value in some currency
To calculate the OnHand-value at a date of any of these bookings you have to
sum up the incoming/outgoing quantities, e.g. (z.B. SUM(InQty) - SUM(OutQty)).
Relation between the type of booking and the values in InQty / OutQty:
++ InQty/OutQty contain the number of items added to/taken from the stock;
the number complies to the value OITW.OnHand is increased/decreased;
-- doesn't affect stock (InQty/OutQty = 0)
? missing documentation
TransType InQty OutQty
-2              ++     --         opening balance
13      --       --         outgoing invoice
13              --      ++          outgoing invoice without previous delivery note
15              --      ++        delivery note
18              --       --         incoming invoice
20             ++      --         incoming delivery note
58             ?        ?          inventory
59             ++      --         stock receipt (without purchasing transactions)
60              --      ++        goods issue (without sales transactions)
67              --      ++        transfer between stocks
67             ++      --         transfer between stocks
I hope that I got your question right and that my hints will help you!
Frank

CO09- structure to get the cumulative ATP quantity

Similar Messages

Maybe you are looking for