Co11n confirmation process

Dear All
Our client scenario is
5 different work centers ex  mill01, mill02,.. mil05.(same process)
production order created for only on work center mill01.
while confirming the order in CO11n we have provision to change the
workcenter where actual prod happened, operator manually changing the
workcenter and doing confirmation. if he forgot to change the workcenter,
While press enter system automatically takes the prd order workcenter ex mill01.
and showing msg
"Actual or planned work center is adopted from operation/operation element."
client need control, that system should not take automatically the default
workcenter, it should ask for actual workcenter.
how han we do this in config. any possible way in OPK4 tcode?
please put light on this
regards
vinoth

Hi,
Your purpose cant be served with OPK4.First of all, you maintain 5 routings for comprising 5 different machines for same material.
Then You need to make following setting in OPL8 ( Order type dependent parameters)  :
Select your Plant & order type , Under Planning tab  maintain Routing selection as
7     Routing mandatory (manual selection)
By maintaining above setting, when creation of order ( either in CO01 or thr conversion of planned order) system will propose to choose alternate routing out of 5 routings you have made 5 different machines.You need to choose routing as per your requirement of mill.You can maintain mill name in routing description so that you can identify mill while choosing routing.
Due to above practice, your required machine will be copied in Production Order only so you need not change it manually while confirmation in CO11N / CO15.
Try above and revert in case any doubt.
Hope this helps.
Regards,
Tejas

Similar Messages

  • Confirm process order problem

    hi
       I configure IMG settings under OPK1 for porcess order..I check "imediately proposal" for quantity/service..But when I use COR6N to confirm process order, the duration field is not proposed...Where should I configure in IMG?
      btw,is there any T-code like COHV in discrete planning to mass confirm process orders?thanks..

    Dear Monst,
    Ensure whether have you made this setting for the standard profile in OPK1 under default tab page check whether for quantity
    and services whether for the value is set as 1 - immediate proposal.
    check with this and revert back.
    Regards
    Mangalraj.S

  • Confirmation process in SRM does not work whenever there is a discrepancy

    Hello,
    we are on SRM 5.0 version with classic scenario(follow on documents in backed system - ECC 5.0). to procure maintainence service user cretes a shopping cart by selecting describe requirements method and UOM at times in incorrectly asssigned as EA so upon shopping cart approval a follow on ducument (purchase requistion) is created in ECC  as per config set up(in SRM). Buyer while coverting this purchase requisition to PO rectifies this erroe and chages the UOM of meausre to Hr and send a PO to vendor.
    we are not bale to use confirmation feature in SRM to perform receipt of this service. is this how system works? any configration or a BADI needs to be usd to allow to perform confirmation in SRM even tough there is discrepancy in shopping cart UOM and Purcahse requsition UOM.
    when thre is change in UOM in ECC that Purchase
    *Confirmation process in SRM does not work whenever there is a discrepancy (i.e. different UM )between Shoping cart and Purchase Requisition related to that Shoping cart.*
    we donot use serive option in SRM and donnot MM service module in ECC.
    any help on this will be much appreciated.
    Thanks,
    sairam

    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!

  • Account Determination - Delivery Order Confirmation Process

    Hi Experts,
    How the Account determination will happen in the Delivery Order Confirmation process. Is the any Account determination analysis tool available to check the same ?
    Regards
    Prasath

    Hi prashanth
    Revenue account determination is the place where SD- FI integration  takes place
    What ever we do in the revenue account determination (t.code VKOA)Generally for every condition type in our pricing procedure we assign account keys wheather it is freight , tax etc
    Now in revenue account determination , to those account keys we assign G/L accounts.
    Now when you do billing , some condition types will come in the billing document . and once you save the billing document those amounts will be flowing to the respective account key G/L accounts
    to FI people
    say for example if for MWST account key is MWS , in billing if  this MWST condition type comes and once you save the billing document  then the tax amount will be flowing to the MWS G/L account .and FI people will look into it
    Once you save the billing document automatically a accounting document and controlling document gets generated
    Now after Post Goods Issue , we save the delivery document here the SD - MM integration takes place
    Once you do PGI , automatically the G/L accounts get updated and the valuation level comes down. So after doing PGI system generated material document and controlling document.
    Regards
    Srinath

  • Confirmation process of an Employee in Oracle Apps HRMS

    Hi,
    How is the confirmation process handled in HRMS when the employee completes the probation period?
    Regards,
    Puja
    Edited by: user12197347 on Jan 18, 2011 4:59 AM
    Edited by: user12197347 on Jan 18, 2011 4:59 AM

    Hello,
    How u distinguishing your employees who are confirmed and those who are in probation period ?
    Once probation period is end (defined in assignment --> Probation tab) then either one of the following can be happen:
    1. Employee got confirmed
    2. Probation extended
    3. Employee got terminated
    Any action can be fired using a custom concurrent program.
    Thanks
    Ayaz

  • Co11n confirmation

    Hi gurus,
    can any one say how to hide rework and scrap field in co11n confirmation.
    Regards,
    Ram

    Ram,
    OPK0, is the config where we can modify the layout or fields required for CO11N. I think for you to hide both Rework & Scrap you there is no option in this config.
    I would suggest you to create transaction variant for CO11N using SHD0 transaction and assign the same to CO11N transaction.
    Regards,
    Prasobh

  • CO11N - Confirmation screen - production order

    Dear Experts,
    How to set mandataroy field for (execution start, finish, created by, created on, time) CO11N - Confirmation screen, which config settings to change.
    pls advise
    Thanks,
    Sankaran

    Hi ,
    Go to transaction CO86 - define field selection for confirmation and set the required fields as Required entry fields.
    Hope the info is useful.
    thanks and regards
    Murugesan

  • Predefined Confirmation Process

    Hi All,
    I have come across a new transaction CO1P. Could you please tell me what is this Predefined confirmation process.
    What data does appear in this transaction.
    When I tried to cancel the confirmation an error message got displayed "There are future records for this confirmation".System suggested me to go to CO1P and resolve the error.

    Hi,
    Refer the following links,
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/e3/7cd32396f611d1b5a60000e8359890/frameset.htm
    Entries in CO1P
    Hope this helps you.
    SmanS

  • Creation of Vendors by batch jobs:  Bypass the 'confirmation' process

    Hello,
    Need your kind suggestions please. When we create a vendor master data it's a two step process. In the first place we create and save it. In the second step a different user needs to log in and confirm the same before the vendor gets active in the system.
    Now, our client usually have to create a huge load of vendors on a regular basis. So they want to automate this process by creating the vendors using a background job. Since the vendors would be created by the batch job, security issues would automatically be taken care of.
    Therefore they want to avoid the second step of 'confirming' the vendors to get them 'active' in the system.
    Is it possible to bypass the 'confirm' procedure so that no one has to log in and keep confirming the huge number of vendors that would need to be created?
    Please advice. if you need more information, please let me know and I would try to answer as far as my knowledge goes.
    Regards,
    Suvarghya

    Hi,
    Go to the following path,
    IMG >> Financial Accounting >> Accounts Recievables and Accounts Payable >> Vendor Accounts >> Master Data >> Preparations for Creating Vendor Master Data >> Define sensitive Fields for Dual Controls (Vendors).
    Click that activity, and delete all the fields that exists which makes it not necessary to confirm any of the vendors when they are created/made a change.
    Good Luck,
    SAP Solutioning

  • SCRAP DURING CO11N CONFIRMATION

    Dear All,
    I am facing client sensitive problem regarding scrap confirmation at CO11N.
    As I am having Production Order of 5 qty & having 3 Operation.
    Now I have confirmed the first Operation with 5 qty as Yield.
    for second operation I confirmed 3 qty yield & 2 as scrap.
    for third operation system is allows me to confirmed the 5 qty as a yield.That's should not be allowed logically & practically as well.
    & system is allowing to confirmed any no of qty of scrap.i.e more than Production order qty.
    Please give your valuble suggesting to clear this issue.
    & exact terminology behind the scrap confirmation.
    I have already maintained error for overdelivery & underdelivery tolerance in confirmation parameter,
    similarly i have not maintained any percentage scrap in BOM & Material master Your immediate reply is highly appreciated
    Thanks & Regards,
    vidyasagar diwate

    I checked and found that system is not allowing me enter the any no of qty for scrap for the second operations.
    here i confirmed 80 as yield and 20 as scarp in first operation...here this will allow me to enter any no of qty of scrap as this is first operation and will give the warning message for exceeding over delivery (this depends again confirmation settings).
    During second operation i confirmed 80 as yield and again 30 as scrap...here i got the error message saying 80 is only allowed.
    regards
    Tajuddin

  • Reg. Stock of material through CO11N confirmation

    Dear Experts
    I am doing confirmation entry in CO11N, Stock is not coming to stock overview screen, there is no stock.
    Pls help, what to do for that to bring the stock.
    Thanks
    Rajakumar.K

    Dear Raja,
    If you are using Blackflush indicator then automatically after confirmation through CO11N, stock will be updated in stock overview screen.
    If you are not using Backflush, then make Goods Receipt with MB31 Tcode for the quantity you have confirmed using CO11N.
    Come back after Trying,
    Ramagiri.

  • Confirmed Process order but with mistake on quantity for material.

    Dear All,
    The case is ,  User make mistake on putting large volume into material quantity within process order,  However, this process order has been released , confirmed and delivery (DLV) status. 
    Since this large vquantity material will make the Cost extra larger than normal.  
    Therefore, is there way to change material quantity and recalcuate the cost again? 
    Many thanks !
    Marco

    Dear all,
    After commuicated with User again,  user has been done as below.
    Step1)
    User has been cancel the process order confirmation by T-code:  CORS,
    Step2)
    Revesed the extra amount Quantity to Block stock to prevent Sales Person touch this extra quantity.
    However,  I checked there is no different on Actual costs after the cancel the Process order confirmation.
    I have some confusing now..
    1) is that once Process order confirmation cancelled,  is that there Must no Actual cost in Accounting view?
    2)  If there is part of physical product produced,  but the Process order has been cancelled afterward. How the cost calcuated?  is that include the cost or exclude the cost? 
    Many Thanks for your help!
    Best Regards
    Marco

  • Table AFRU, Transaction CO11N, confirmation not released?

    Hi Gurus,
    this question is regarding confirmation numbers (AFRU or other tables) and transaction CO11N.
    can you help me in with problem (Test condition)?
    Send notifications of not released orders.
    my question is how? what table? field? transaction? anything. can someone explain me this? i made an FM that simulates CO11N and it is one of the test conditions.
    Thanks

    Hi,
    Your question is not understood. Can you please explain a bit more. If you question is purely Functional, Please post the same in Functional Forum.

  • SRM SUS - confirmations process

    Hello,
    I have 2 questions, hoping you can provide help:
    Question 1 - when supplier confirms the purchase order in SUS, is it possible for the supplier to go back into the purchase order and re-confirm order for different delivery dates or quantities (e.g. put back into "in process").  Currently the supplier is only able to do the ASN as the next step
    Question 2 - is it possible for the supplier todo confirmations for schedule agreement releases, e.g. like we do for purchase orders?  Currently supplier has "new" and "in process" status, and there is no collaboration on delivery dates and quantities back to the SAP R/3 system
    We are using SRM v7 and SAP R/3 4.6c (and SAP PI)
    Thanks

    Hi Azam
    It won't be possible for suppliers to change the PO response that they have entered initially.
    Normally the PO response would go to SRM for approval by the buyer. If the buyer doesn't accept the POR they may send back and then the suppliers can enter a new one.
    However if it is approved by buyer or Auto-approved( as in our case), suppliers won't be able to change that.
    I imagine that it would be a complex development to change this behavior
    Regards
    Kedar

  • Restricing CO11N confirmations for TECO orders

    For production orders with partial confirmations and TECOed say  TECO & PCNF, PDLV  how to restrict further confirmation happening in CO11N
    Thanks & Regards
    Manikandan .J

    Hi Mani,
    You can restrict it the confirmations for TECO order by following ways.
    1) Using User Status (T.Code BS02) - You can set both Production order and / or Prod. Cofirmation
    2) User Exit
         - CONFPP05 PP order confirmation.: Customer enhancements during saving
         - CONFPP04 PP order confirmation: Customer-specific input checks 2
         - CONFPP02 PP Order confirmation: Customer-specific input checks 1
    Regards,
    Dhaval

Maybe you are looking for