CO11N Errors:Depend. goods mvemnt. was incorrect & Deficit of SL Unres.-use

Dear Colleagues,
When trying to confirm a particular order on CO11N,users came across these error 2 messages:
A) Depend. goods mvemnt. was incorrect
B) Deficit of SL Unrestricted-use 2 PCS : (Matnr No) (Cost centre)
Message no. M7021
I think they have changed recently the routing of this material...
On CA02 the last step's Control Key isn't greyed out as the others are (it is  called "TEST" ).I compared CO02 with CA02  and the steps of the routing are exactly the same between the two;the only difference is the last step of the routing in the production order isn't CNF REL but only REL. I tried to confirm it individually on CO02 but it wouldn't allow it.
Can you please point me to the right direction on where to strat looking at?Is it within the routing something hasn't been maintained? Or within Material Master?Is it the work centre of the last operaton not been maintained anywhere?
All help is appreciated.
PAPJ

Thanks Vivek,
The problem ended up to be the wrong cost centre  the production order.
Apparently it has been a recurring issue for this part (i.e. the wrong cost centre contained in the production order that has to be manually altered on CO02 for the confimation on CO11n to go through...
I have two questions:
Where do the production orders take the cost centre info from?
Secondly,another production order contained the wrong info (wrong control key...) .Again,where do production orders take the control key info from?
All help appreciated,
PAPJ1.

Similar Messages

  • Error: dependent goods movement was incorrect

    Hi,
    Can anyone help me please correct this error "dependent goods movement was incorrect" (message no. RU 523).  I have encountered this error upon confirmation.
    Thanks.
    Regards,
    Ching

    This error is noticed when production storage location between parent and child in direct production(special procurement
    key - 52) is_ NOT_ similar i.e. mismatch of storage location
    Example:
    Production Order A {Collective parent structure production storage location: 0001}
    |
    |
    |
    Production Order B {Collective child production storage location: 0002}
    In above scenario, prod. sloc is 0002 for child while 0001 for parent, which inturn results in COGI error with error message  TYPE RU 523
    Steps performed for correction:
    1. Cancel the production order confirmation for component
    2. In co02, edit the goods reciept sloc for component under goods reciept tab such that it matches with parent production order storage location
    3. Redo the confirmations for the component production order and reprocess the COGI

  • Dependent goods Movement was incorrect

    Hi all
    I am having an error in my COGI whenever I confirm a collective order. Error says that "Dependent goods Movement was incorrect". What does that mean?

    There could be a program error in standard SAP. I would suggest you to search in OSS, I found the following notes and error RU523 will be raised for different settings in IMG due to bug,
    458140      RU523: Incorrect grouping of dependent goods movements      
    793058      RU523: Incorrect summary of dependent goods movements      
    389690      Collective order confirmation: Storage location transfer      
    354564      Collective order:dependent goods movement incorrect      
    577515      RU523: Incorrect summary of dependent goods movements      
    374707      Confirmation:goods movement with separate valuation      
    542451      COGI: Entries with C6013 without error date/error time      
    576663      RU523: Unnecessary summary of dependent goods movements      
    412329      COGI: Problems with dependent goods movements      
    331421      Confirmation: Goods movement with split valuation      
    513786      Dependent goods movements are separated      
    327137      Problems with dependent goods movements as of Release 4.5      
    412329      COGI: Problems with dependent goods movements      
    680650      Cannot get initial context or service "FILE".      
    1453716      SXS library: Missing function modules

  • Error: The chosen certificate was not exported and cannot be used for SSL

    Hello there,
    when I try to configure the profilemanager in OS X Server and it comes to choose a certificate i get the following message:
    The chosen certificate cannot be used.
    The chosen certificate was not exported and cannot be used for SSL.
    I chose our Wildcard certificate we received from Thawte.
    It is completely imported in the Keychain from the Mac.
    (Sorry if any sentence is wrong, I translated it from german to english)
    Best regards,
    Christoph

    Is this a regular web ssl cert or a code signing cert?

  • HT3728 Firmware Update 7.6.4 Error: I uploaded the 7.6.4 firmware update today, and received an error message as it was finalising. As I am using my Time Capsule as the Airport router, I am now no longer able to access it to try to resolve the problem. He

    Dear Support Team,
    I agreed to the Time Capsule 7.6.4 update today, but as it was completing, I received an error. It said to close the page and try again.
    I use my Time Capsule as my Airport wireless router and now can't access the Time Capsule to re-upload the Firmware update.
    Has anyone else had this happen?
    Is there a way to resolve the problem?
    Do I need to hardwire the Time Capsule? Then what?
    Would really appreciate some help!!
    Thanks everyone.

    Factory reset the TC and it should come back to life.
    The Factory Reset.
    Power down the TC.
    Hold in reset. and keep holding it in. Be Gentle! It is a tiny surface mount switch with a plastic lever.. Attempting to push it out the other side of the TC will not make the switch turn on better.
    (I fix TC and have several reset levers bent over and jammed or broken off).
    Power on the TC.. remember with the reset held in.. this needs three arms.. a friend or power switch you can get to with your feet..
    Keep holding in reset for about 10sec until the front LED flashes rapidly.
    Release reset and wait .. the boot will be slow as it deletes previous setting.. only from router side and pulls out the factory defaults. No files are deleted on the hard disk.. but the name of the TC may change.
    As a rule .. wireless is not reliable enough for mission critical work like firmware upgrades.. (Heck I don't think it is reliable enough for backups).
    Apple doesn't insist on wired connections.. some other manufacturers do.. and post warnings not to attempt it over wireless. Warnings inevitably read after the failed firmware update btw.. so perhaps Apple have decided to just save themselves the hassle.
    I believe it is just good practice to use ethernet for any time that sitting on a branch.. whilst sawing it off (ie failure will kill any future access).. means you always use ethernet for any setting up of a wireless router.. but you see I am old.. with grey/white hair.. and too many dead modems and routers around me.

  • Max error the password you typed in was incorrect

    I have crio 9073. Installed labview 2012. Formatted the crio (previous labview 2011, all is working). IP configuration is ok, no password set.
    The system state is "connected - safe mode (no software installed)
    Now when i try to add the software to the crio, max respond me:
    "the password you typed in was incorrect"
    I have "reset configuration data", repaired max installation, reformatted the crio, but the error is the same.
    Any possible solution?

    Hi toforgive,
    you can try to repair the installation of LabVIEW Real-Time and NI-RIO in order to check if an error depends on the installation of the software.
    Thanls,
    Giuseppe.

  • HT201210 iTunes update 11.1.4 produces an error message R6034 "An applicaton has made an attempt to load the C runtime library incorrectly" When that error is acknowledged, a second windows error 1114 "error 7" displays "iTunes was not installed correctly

    iTunes update 11.1.4 produces an error message R6034 "An applicaton has made an attempt to load the C runtime library incorrectly" When that error is acknowledged, a second windows error 1114 "error 7" displays "iTunes was not installed correctly".  I also tried to downloadiTunes 11.1.4 at th Apple website and that did not work either-It stalled with an erro message that stated the "mobile service" would  not open HELP!

    Hi Doug! I was having the same problem but after reading a lot of answers I found the solution. First of all you need unistall ALL THE SOFTWARE OF APPLE from your computer, I mean BONJOUR, QUICKTIME, ITUNES, APPLE SOFTWARE UPDATE, APPLE MOBILE DEVICE SUPPORT and the other one that is from compatibility with apps of apple, after that you must verify if this folders are removed if they don't then remove it:
    C:\Program Files\Bonjour
    C:\Program Files\Common Files\Apple\
    C:\Program Files\iTunes\
    C:\Program Files\iPod\ 
    If you have a 64-bit version of Windows, you'll need to confirm that the following folders have been removed: 
    C:\Program Files (x86)\Bonjour
    C:\Program Files (x86)\Common Files\Apple\
    C:\Program Files (x86)\iTunes\
    C:\Program Files (x86)\iPod\
    Then if you have ccleaner you can use it to clean all registers left, then reboot and try to install iTunes 11.1.4 again as administrator... That works for me, I hope that helps you too...

  • There was an error in opening this document incorrect function

    Hi, i got adobe reader pro 6, when im try to open ''some'' of my pdf, i got this error message :
    "there was an error in opening this document incorrect function"
    Can someone can help me?
    Thank

    The pdf is corrupted. It needs to be re-downloaded or recreated.
    Mike

  • HT5538 Every time I try to use apple ID for face time I got an error message "the username or password was incorrect" although they are right and I use them in App Store and I cloud even after resetting my password

    Every time I try to use apple ID for face time I got an error message "the username or password was incorrect" although they are right and I use them in App Store and I cloud even after resetting my password, the problem happens also with iMessage . Please help

    For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices. 
    That all works.
    It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now.  They are all synced, and all was working just fine.
    I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
    Thanks for listening,
    Melissa

  • TS4185 I have downloaded facetime from the App store and I keep receiving this message - An internal FaceTime error occurred.  There was a problem with FaceTime. You need to quit and open FaceTime again.  Please help!

    I have downloaded facetime from the App store and I keep receiving this message - An internal FaceTime error occurred.  There was a problem with FaceTime. You need to quit and open FaceTime again.  Please help!

    This error message could result from an incorrect setting for date and time, or an operating system which does not have the latest updates installed.  It's a good idea to have your location setting on automatic.  Turn on the wi fi in your mac for a minute or so, to allow it to automatically search for your present location.  Do this even though you have the correct time Date settings displayed.

  • Trouble logging to SAP from Excel: Error "Name or password is incorrect"

    Hi,
    When I am logging to SAP(APO) from Excel using VBA, I am getting error
    "Name or password is incorrect" "repeat logon".
    I have made my password in CAPITAL letters.
    Also I have the authorization S_RFC.
    Still I am not able to logon.
    If any changes are required in Profile Parameter, let me know.
    Is there any setting that I should do in sm59.
    What steps should I do, so that I can login to SAP.
    Regards,
    Vikas

    Hi Vikas,
    sorry, but i have no other ideas, perhaps any other member of
    this forum can help you.
    good luck.
    Regards, Dieter
    Can you show the VBS-Code, i will test it in my System
    Regards, Dieter
    Message was edited by:
            Dieter Gröhn

  • Runtime Error in Goods Receipt

    Dear Experts,
    The runtime error while posting Goods Receipt.
    The Current application triggered a termination with short dump.
    Error analysis
    Shirt text of Error Message
    Document number 1000 (Company Code) 5000000000 2008 was already assigned.
    Long text for Error message:
    Diagnosis
    Document number 5000000000 in company code 1000 and Fiscal year 2008 has already
    been assigned.
    System Response -
    Termination of Processing
    Procedure
    Check document number range 50 in company code 1000 and fiscal year 2008 and correct the number range status. 
    Please guide me on this runtime error while Goods receipt.
    Thanks in Advance

    This means that the system tried to create a document with the number from the number range status but since the document with the same number was already in the system the system could not proceed overwriting hence resulted in a dump.
    How to over come. Give a number range or give a current status to the number range for which documents does not exist in the system.
    Edited by: Anand Patel on Oct 7, 2008 1:12 PM

  • Hi I am using an iphone 4 and its was working fine.  Presently its giving browsing error.  Whenever I am trying to browse internet by using safari or any other browser it retruns with "server not responding" Can somebody give me a solution for this ?

    Hi I am using an iphone 4 and its was working fine.  Presently its giving browsing error.  Whenever I am trying to browse internet by using safari or any other browser it retruns with an error message "server not responding" Even the same thing is happening with youtube also. The worst part is am able to check my mails, able to chat and so on... only thing not able to browse through the browser.  I have tried restore option also.  This is happening with both Wlan and Data con. too
    Please help...

    I do not really know much about this kind of problem, but i may be your internet connection.
    If you are on your own #G network then:
    Go to Settings > then enable "Airplane Mode". Count to 10 and then disable it.
    Then wait patiently until you get a good connection and then try again.
    If you are on a nearby Wi-Fi connection then:
    Go to Settings > Wi-Fi > then disable then enable after counting to 10. Make sure that you are connected and then try again.
    If all else fails, then you need to contact your provider for assistance.
    Sprint:888-211-4727
    AT&T:?
    Verizon:?

  • HT1222 I am trying to update my phone so I can save my info on my old phone & get a new phone, but I get a error that says "There was a problem with downloading teh software, the network connection timed out.."  HELP!  Not sure what my settings shoud be..

    I am trying to update my phone so I can save my info on my old phone & get a new phone, but I get a error that says "There was a problem with downloading teh software, the network connection timed out.."  HELP!  Not sure what my settings shoud be...
    I never updated anything until now...I want o update my iPhone to the newest version, but i do not want ot loose all that I have on this phone. I was told I needed to update the operating systems so i can put things into the cloud for transport to new phone, but I am just not sure how to do this..Can you help out here??

    Dear Jody..jone5
    Good for you that can't update your iphone because I did it and my iphone dosen't work for example I can't download any app like Wecaht or Twitter..
    Goodluck
    Atousa

  • "Error: Final Cut Pro was unable to read the movie file just captured"

    Hello everyone!
    We had a computer crash while we were working on Final Cut Pro and backing up some media to a hard drive.
    Since then, whenever we "capture' video footage and hit the escape key to stop capturing - we get -
    "Error: Final Cut Pro was unable to read the movie file just captured"
    We reinstalled the Final Cut Pro software all over again thinking that maybe the software got corrupted and we also rectified any disk permissions for the hard drives.
    Any ideas?
    Thanks
    Efrain
    G 5   Mac OS X (10.4.8)  

    We had a computer crash while we were working on Final Cut Pro and backing up some media to a hard drive.< </div>
    You eventually want to figure out how that happened and make sure you fix it.
    Since then, whenever we "capture' video footage and hit the escape key to stop capturing - we get -
    "Error: Final Cut Pro was unable to read the movie file just captured"
    <
    You reformatted the external drive, yes? You might not have used the correct initialization setting. Should be Macintosh HFS, journalling is optional. Or you have a drive formatted for Winderz.
    Aside from incorrect drive formatting, we have seen this error if the capture is incomplete or improperly terminated.
    It's not an FCP issue, it's hardware.
    bogiesan

Maybe you are looking for