CO12-Yield quantity shown is zero even after confirmation with correct qty.

Hi Experts,
While confirmation using CO12- collective confirmation, i get a message "Total confirmed quantity does not equal planned quantity"( ECC6.0 system). Moreover for few plants, the yield is zeroed out, eventhough i enter the planned qty and after confirmation is executed, the yield shown is zero for those confirmed operations.
1. Why does the message "Total confirmed quantity does not equal planned quantity" appear eventhough i enter the planned operation quantity for confirmation?
2. Why does the yield quantity zeroed out for some plant? (maybe for some material)?
Any pointers would be of great help.
Thanks,
SudhaharN

Hi,
Answers to your questions are,
1. Why does the message "Total confirmed quantity does not equal planned quantity" appear eventhough i enter the planned operation quantity for confirmation?
Total confirmation quantity for that particular operation is exceeding the actual Qty.
You can check in CO14 how much it is already confirmed.
2. Why does the yield quantity zeroed out for some plant? (maybe for some material)?
Check setting in OPKI (for collective conf) wether you have selected the option Qtys immeed.
This will propose you the remaining qty in CO12 you need not to enter.
Give points if this is useful.
Regards,
Vinayak.

Similar Messages

CO12- Yield quantity gets zeroed out for some plants.

Hi Experts,
While confirmation using CO12- collective confirmation, i get a message "Total confirmed quantity does not equal planned quantity"( ECC6.0 system). Moreover for few plants, the yield is zeroed out, eventhough i enter the planned qty and after confirmation is executed, the yield shown is zero for those confirmed operations.
1. Why does the message "Total confirmed quantity does not equal planned quantity" appear eventhough i enter the planned operation quantity for confirmation?
2. Why does the yield quantity zeroed out for some plant? (maybe for some material also)?
Any pointers would be of great help.
Thanks,
SudhaharN

In OPk4, Confirmation parameters, for ur plant and order type combinaation, check the tab "operation indiv.entry initial screen. "
In that tick the Quantities PROPOSED..
u ll get away from the issue...
hope this helps..
karthick

The g, h and backspace on my keyboard are not working even after replacing with a new one.

The g, h and backspace on my keyboard are not working even after replacing with a new one. I have also updated my BIOS still d same. Please help me ASAP.
...am waiting for a QIUCK RESPONSE

How does a usb keyboard attached externally work?
You might try a "hard reset" where you remove battery and AC charger, hold down power button 20-30 seconds and then reassemble and turn on. Reset BIOS (F10) to default settings, too.

Moving average price of the material is zero even after goods receipt

Hi,
We find that many bought out materials with price control 'V' have their MAP value zero in material master even after goods receipt and invoice receipt.
What could be the reason?
With Best Regards,
Rajkumar

Hi,
Check the account postings for your goods receipt and invoice receipt.
Further check the change history of the material master. Manual prcie changes carried out using MR21.
There is other standard transaction MRN0 where SAP allows to make the direct update of MAP. Check in MM04 Transaction to see if there is any change in the material master.
Regards,
Divya V

Process Order accepts Confirmation & GR from BAPI even after Confirmed

No matter what i try the formatting and CRLF go for a toss in this text.
Hi PPPI Gurus,
I am a beginner in this area and request your help.
We are implementing a project where the process order Confirmation in SAP ECC 5.0 in SAP PPPI module is done using xMII which call the BAPI_PROCORD_CREATE_TT     RFC.
The customer wants to (certain times) do a final confirmation without actually completing the order e.g if the Order Qty is 100 then, they want to just manufacture 25 and then do a final confirmation, after which SAP GUI screen does not allow any Process order Confirmations against that process order.
We are using the BAPI_PROCORDCONF_CREATE_TTRFC to do multiple PO Confirmations and GR for particular Process order. Below is a scenario
Case 1:
1. Order Qty =100 ( Unlimited Delivery is not checked and tolerance is Zero).
     Which means only 100 is accepted.
2. 100 Quantities are produced and confirmed using the BAPI_PROCORDCONF_CREATE_TT (with Final confirmation value as 1 , which mean auto confirmation)
3. Next when the BAPI confirms & GR's against the same order, the Complete qty is not visible in the COR3 status. And is visible only in the COGI transaction.
That is expected behavior. and i am ok with that.
Case 2: (The one with the problem)
1. Order Qty =100 ( Unlimited Delivery is not checked and tolerance is Zero).
     Which means only the 100 is accepted.
2. 25 Quantities are produced and confirmed using BAPI_PROCORDCONF_CREATE_TT (with Final Confirmation value as X , which mean Final confirmation)
3. The Confirmation and GR go through and the status of the process order now changed is CNF and the Deliverd qty is 25.
At this point , if you logon to SAP GUI and try to make a process order confirmation you get an error messages which says the Process Order is already confirmed and no more confirmations or GR can be done against this Process order.
4. But when you Again Run the BAPI_PROCORDCONF_CREATE_TT, it goes ahead and confirms and makes the GR for that Process order.
The Expected Behavior should have been that this quantity is now in the COGI transaction.
5. The Process order allows any number of Further confirmations till the Ordered Qty and Delivered quantity are same .
so dear gurus I know i have written a very long doubt but would be very happy to get a response from you. I would ideally not like to enhance or change the BAPI and want to understand if I have missed some setting or parameter that I have to pass in the BAPI for the final confirmation so that once the Status of the Process order is CNF , no more Confirmations are allowed even from the BAPI.
Thanks in Advance.
Regards
Suraj
Edited by: surajprabhu on Aug 17, 2009 6:37 AM

Hi,
The standard SAP will allow the GR even after the Final Confirmation. The Final Confirmation is acting as a agent to change the status of the process order to CNF. thats all.
If you want to restrict the GR then you have to do Enhancement with use the USer Exits. Pleas try to use the User Exits PPC00009 or MBCF0001,MBCF0005
thanks and regards
murugesan

My CS5.5 MC serial not accepted even after installing with FB 4.6

Hello all,
My CS5.5 MC serial number is not accepted by FB 4.6 even after start it in trial mode as suggested here: http://kb2.adobe.com/cps/924/cpsid_92402.html
Can anyone help me?

Hi,
Is MC (CS 5.5) already installed on your computer? If so, does it have FB 4.5 also installed as part of it? If FB 4.5 is already installed (either as point product or as part of CS 5.5), you need to uninstall FB 4.5 before installing FB 4.6
After uninstalling FB 4.5, run FB 4.6 installer. Instead of enterning the CS 5.5 MC serial number during installation of FB 4.6, install FB 4.6 as a trial first.
Are you able to launch FB after installing as above?
Is MC serialized already on your machine? Then FB would pick up that serial number automatically and work like a premium version.
If not, it would show the serial number screen when you launch FB 4.6 and it would then accept MC 5.5 serial number.
Please follow the above steps in the same order and let us know if that works.
Thanks,
Deeptika

Even after syncing with iTunes, the usage amount on iTunes does not match what is on my iPhone. iPhone says I have less that 1G of storage left, while iTunes says I have 6G of storage. Why is this??

I can't tell how much storage I have left on my device. Even after syncing, iTunes shows that I have 6G of storage left. My phone says I only have 325MB of storage left. When I try to update my apps on my phone, I'm told that I don't have enough space available. Why is this, and how can I correct this? Thanks!

Howdy mamat2004,
Thanks for using the Apple Support Communities.
From your post I understand that even though you have imported and deleted all of the photos from your iPhone, it is still showing as if the photos were still located on the device. To start troubleshooting this issue I'd like you to please reset the iPhone. If the issue persists then please put the device into recovery mode, and then select the option to Update in iTunes. Choosing this option will reinstall iOS without erasing any of your personal data.
To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Take care,
Alex H.

SD-- WMS : DO line item is cancelled even after confirmed TO

Hi All,
We are in ECC6. MM & SD linked to Full WMS.
Process: SD-WMS: SO>DO>TO>Confirm TO>PGI -->Billing
Problem: User is able to cancel the DO line item even after the TO is confirmed.
Issue: Warehouse picked the items with TO from the bin and it is confirmed in the shipping area. But SD-Shipping user is cancelling the DO line item. System should not allow this. Is ther any config setup missing to lock it?
Thanks in advance.
MBS

Hi
Normally SAP does not allow to cancel confirmed transfer order. However, exception is transfer order for delivery.
If you are creating a delivery it is possible for you to remove the WM stock from the delivery with transaction LT0G. So it's nothing unusual.
If useful, please award points.
Regards
Rahul

Inspection lot is not shown Production order Even after GR.

Hi Gurus
My scenario is involved with of Inspection after taking GR From Production order.i have maintained following settings :
1.Inspection Type 04 Assigned for relevant Order type.
2.In Material Mastr Inspection Type 04 Maintained.
3.Quality plan created with relevant material code with usage -GR(05)
while i am taking GR Inspection lot is generated.every thing working fine.But inspection lot no.is not displayed in production order (ASSIGNMENT TAB) after taking the GR.
Am I missing Any settings?
Regards
Bala

Hi
while i am taking GR Inspection lot is generated.every thing working fine.But inspection lot no.is not displayed in production order (ASSIGNMENT TAB) after taking the GR.
What is the status of the the lot generated'
is it REL & CRTD??
Since You have maintained usage 5 in task list & generally usage should be 1 (for production order ) it will as per my knowledge remin in CRTD state.
Thenyou have to use QA02 to attach the task list
This might be a reason that lot is visible.
I hope this will add some value.
Regards
Sujit

Rental Obj.Occupancy Stat shown as Reserved even after Lease Deed is closed

Hi All,
We r having a problem. Few of the rental objects occupancy status is going to "reserved" after the expiry of an existing lease deed. Normally it goes into Vacant. After going into reserved it is not allowing us to change it back to "Vacant" giving a message that this rental object has been reserved by the contract.
Rental object X is reserved by
contract ZZZ in period 29.06.2011-
28.06.2012
Where as the contract has been expired and concluded on 28.06.2011. Please help how to resolve this.

Hi,
Check the contract, is there any renewal rules assigned ???
In case if there is any automatic renewal rule exists, to reject this renewal, notice has to be given.
Automatic renewal rule : If notice was not given on the contract by this date, then the contract is automatically renewed up to the date in the "Renewal to" field.
regards,
Srini

Supressing Zero Rows after drilldown with a free characteristic

Hello,
during drilldown with the usage of a free characterictic, some zero rows are shown. If a key figure has no value for all columns, we would like to supress these rows, which are show up with the drilldown characterictic.
Especially drilldowning to account number level in our reports creates a confusing long list with a hundred of zero lines.
Can someone tell me how to suppress this zero lines?
Thanks,
Nuran

unfortunately that didn't work. I think so we need a general condition function, that we can say; when all the columns are zero then suppress this row, but with a standard condition function it seems also not possible to do this.
Message was edited by: Nuran Adal

Firefox will not open on my computer, even after reinstall, with no error message or when I try to run "C:\Program Files\Mozilla Firefox\firefox.exe" -p. Help?

I recently installed firefox so I could use an adblocker. It installed just fine, and it worked just fine for about three days. Then yesterday it stopped opening. I'm on a Toshiba running Windows 7. The icon highlights when I click on it, but then it stops and won't open the browser at all. When I try to run it with the manual command "C:\Program Files\Mozilla Firefox\firefox.exe" -p, I get the error message, "C:\Program Files\Mozilla Firefox\ refers to a location that is unavailable. It could be on a hard drive on this computer, or on a network. Check to make sure that the disk is properly inserted, or that you are connected to the Internet or your network, and then try again. If it still cannot be located, the information might have been moved to a different location." I installed it to that location, and I don't need a disk. I'm connected to the Internet just fine and my other browsers (Chrome and IE) work the same as always. But they're swamped with ads and I really was happy wih Firefox when it was opening...how can I fix this issue?

Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!

IChat AV does not work behind firewall even after opening up correct ports

Hi. I am trying to get my iChat setup so that I can do video and audio. It works fine when my mac is directly plugged into the cable modem. When I plug it into my firewall it will not connect. I have read many online manuals and forums and I have tried opening many ports etc on the fire wall. I am using a MBP thats running the latest software. This is clearly an external firewall issue because my MBP works fine without the firewall.
Here is what I have forwarded.
Ports to Open on Firewall.... BOLD LAN ports only.
TCP: 5220, 5222, 5223
UDP: 5060, 5297, 5353, 5678, 16384-16403
TCP/UDP: 5180, 5190, 5298
according to http://support.apple.com/kb/HT1507
It attempts to connect then fails. I have run it in terminal to try to catch the error logs and figure out what is going on. I have the complete error logs from three seperate attempts if that would help.
The firewall is a FreeBSD based firewall running pfsense. It is also controlling DHCP. My MBP is connecting to the network via a Time Capsule which has been set to not do DHCP and instead forward to the firewall/router. When my MBP connects it is always assigned the same IP based on its mac address. All the firewall rules are set to that IP. Any idea whats going on here?
http://www.pcmofo.com/pictures/ichatfirewall2.png
122748.533380 prepareConnection - remote VCConnectionData: 00db8200, local VCConnectionData: 00cd1a00
122748.533739 ICEStartConnectivityCheck(id[local:1 remote:2] count[local:3 remote:3] candidate[local:0x19BDF980 remote:0x19BD04C0] pair[0x00DBB800]
122748.533999 connectivity check thread start...(-1327992832)
122748.534908 *** Insert conn check events ***
122748.534933 event 192.168.1.17:16402->192.168.1.101:16402 expires 19.143084
122748.534949 event 192.168.1.17:16402->70.118.207.71:16402 expires 19.193084
122748.534963 event 66.24.234.152:56364->192.168.1.101:16402 expires 19.243084
122748.534976 event 192.168.1.17:16402->70.118.207.71:51255 expires 19.293084
122748.534989 event 66.24.234.152:55805->192.168.1.101:16402 expires 19.343084
122748.535003 event 66.24.234.152:56364->70.118.207.71:16402 expires 19.393084
122748.535030 event 66.24.234.152:55805->70.118.207.71:16402 expires 19.443084
122748.535048 event 66.24.234.152:56364->70.118.207.71:51255 expires 19.493084
122748.535062 event 66.24.234.152:55805->70.118.207.71:51255 expires 19.543084
122748.543505 Invoke delegate method vcc:initiateConferenceStartedForParty:(hippyjm2)
122748.543545 ### NEW STATE: to: VC_SIGNALING, from: VC_IDLE
122748.543608 initiateConferenceCallUsingConnectionDataWithErrorInfoToUser - start
122748.543629 Callee connection data 621 bytes. Caller connection data 621 bytes.
122748.543713 ( )( )( ) ---- <nil> valid returned 0
122748.543726 =========== OpenPorts!
122748.543779 RTP/RTCP ports for PayloadType 1 are 16402 and 16402
122748.543872 RTP vfd (102) accepts pkt (0010)
122748.543881 RTP vfd (103) accepts pkt (0040)
122748.543928 RTP/RTCP ports for PayloadType 0 are 16402 and 16402
122748.544086 RTP vfd (104) accepts pkt (0008)
122748.544097 RTP vfd (105) accepts pkt (0020)
122748.664918 selectedCamera returned Built-in iSight
122748.667540 * Caller SDP *
122748.668290 v=0
o=brett 0 0 IN %RTP-IP-AF% %RTP-IP%
s=pcmofo1
c=IN %RTP-IP-AF% %RTP-IP%
b=AS:2147483647
t=0 0
a=hwi:17412:2:2400
a=iChatEncryption:NO
m=audio %ARTP-PORT% RTP/AVP 110 121 12 3 0
a=rtcp:%ARTCP-PORT%
a=rtpmap:121 speex/16000
a=rtpmap:122 speex/8000
a=rtpmap:113 X-AAC_LD/44100
a=rtpmap:110 X-AAC_LD/22050
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:2622513995
m=video %VRTP-PORT% RTP/AVP 123 126 34
a=rtcp:%VRTCP-PORT%
a=rtpmap:123 H264/90000
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO %ARTCP-PORT% VIDEO %VRTCP-PORT%
a=fmtp:126 imagesize 0 rules 20:640:480:640:480:20
a=fmtp:123 imagesize 0 rules 20:640:480:640:480:20
a=rtpID:3063294723
122748.668656 <<<<<<<<<< Conference initiation API version 2 >>>>>>>>>
122748.671623 join connectivity check thread(-1327992832)...
122748.684178 *** event (192.168.1.17:16402->192.168.1.101:16402) fired ***
122748.684349 BINDING_REQUEST to 192.168.1.101:16402 from 192.168.1.17:16402
122748.684361 OLD STATE(WAITING)->NEW STATE(TESTING)
122748.759544 queue full, avg delay 8.61 ms
122748.760193 queue full, avg delay 8.61 ms
122748.760793 queue full, avg delay 8.61 ms
122748.833412 *** event (192.168.1.17:16402->70.118.207.71:16402) fired ***
122748.833565 BINDING_REQUEST to 70.118.207.71:16402 from 192.168.1.17:16402
122748.833578 OLD STATE(WAITING)->NEW STATE(TESTING)
122748.982643 *** event (66.24.234.152:56364->192.168.1.101:16402) fired ***
122748.982740 BINDING_REQUEST to 192.168.1.101:16402 from 66.24.234.152:56364
122748.982749 OLD STATE(WAITING)->NEW STATE(TESTING)
122749.131799 *** event (192.168.1.17:16402->70.118.207.71:51255) fired ***
122749.132199 BINDING_REQUEST to 70.118.207.71:51255 from 192.168.1.17:16402
122749.132212 OLD STATE(WAITING)->NEW STATE(TESTING)
122749.281319 *** event (66.24.234.152:55805->192.168.1.101:16402) fired ***
122749.281476 BINDING_REQUEST to 192.168.1.101:16402 from 66.24.234.152:55805
122749.281490 OLD STATE(WAITING)->NEW STATE(TESTING)
122749.430647 *** event (66.24.234.152:56364->70.118.207.71:16402) fired ***
122749.430794 BINDING_REQUEST to 70.118.207.71:16402 from 66.24.234.152:56364
122749.430810 OLD STATE(WAITING)->NEW STATE(TESTING)
122749.579896 *** event (66.24.234.152:55805->70.118.207.71:16402) fired ***
122749.580130 BINDING_REQUEST to 70.118.207.71:16402 from 66.24.234.152:55805
122749.580158 OLD STATE(WAITING)->NEW STATE(TESTING)
122749.730792 *** event (66.24.234.152:56364->70.118.207.71:51255) fired ***
122749.730917 BINDING_REQUEST to 70.118.207.71:51255 from 66.24.234.152:56364
122749.730927 OLD STATE(WAITING)->NEW STATE(TESTING)
122749.879979 *** event (66.24.234.152:55805->70.118.207.71:51255) fired ***
122749.880147 BINDING_REQUEST to 70.118.207.71:51255 from 66.24.234.152:55805
122749.880160 OLD STATE(WAITING)->NEW STATE(TESTING)
122751.669238 ===== connectivity check retry =====
122751.669301 *** Insert conn check events ***
122751.669398 event 192.168.1.17:16402->192.168.1.101:16402 expires 22.277497
122751.669472 event 192.168.1.17:16402->70.118.207.71:16402 expires 22.327497
122751.669517 event 66.24.234.152:56364->192.168.1.101:16402 expires 22.377497
122751.669549 event 192.168.1.17:16402->70.118.207.71:51255 expires 22.427497
122751.669579 event 66.24.234.152:55805->192.168.1.101:16402 expires 22.477497
122751.669611 event 66.24.234.152:56364->70.118.207.71:16402 expires 22.527497
122751.669642 event 66.24.234.152:55805->70.118.207.71:16402 expires 22.577497
122751.669674 event 66.24.234.152:56364->70.118.207.71:51255 expires 22.627497
122751.669706 event 66.24.234.152:55805->70.118.207.71:51255 expires 22.677497
122751.719434 *** event (192.168.1.17:16402->192.168.1.101:16402) fired ***
122751.719949 BINDING_REQUEST to 192.168.1.101:16402 from 192.168.1.17:16402
122751.719970 OLD STATE(TESTING)->NEW STATE(TESTING)
122751.869114 *** event (192.168.1.17:16402->70.118.207.71:16402) fired ***
122751.869267 BINDING_REQUEST to 70.118.207.71:16402 from 192.168.1.17:16402
122751.869278 OLD STATE(TESTING)->NEW STATE(TESTING)
122752.018363 *** event (66.24.234.152:56364->192.168.1.101:16402) fired ***
122752.018599 BINDING_REQUEST to 192.168.1.101:16402 from 66.24.234.152:56364
122752.018626 OLD STATE(TESTING)->NEW STATE(TESTING)
122752.167753 *** event (192.168.1.17:16402->70.118.207.71:51255) fired ***
122752.168144 BINDING_REQUEST to 70.118.207.71:51255 from 192.168.1.17:16402
122752.168174 OLD STATE(TESTING)->NEW STATE(TESTING)
122752.317336 *** event (66.24.234.152:55805->192.168.1.101:16402) fired ***
122752.317448 BINDING_REQUEST to 192.168.1.101:16402 from 66.24.234.152:55805
122752.317458 OLD STATE(TESTING)->NEW STATE(TESTING)
122752.466531 *** event (66.24.234.152:56364->70.118.207.71:16402) fired ***
122752.467779 BINDING_REQUEST to 70.118.207.71:16402 from 66.24.234.152:56364
122752.467831 OLD STATE(TESTING)->NEW STATE(TESTING)
122752.616938 *** event (66.24.234.152:55805->70.118.207.71:16402) fired ***
122752.617268 BINDING_REQUEST to 70.118.207.71:16402 from 66.24.234.152:55805
122752.617290 OLD STATE(TESTING)->NEW STATE(TESTING)
122752.766342 *** event (66.24.234.152:56364->70.118.207.71:51255) fired ***
122752.766479 BINDING_REQUEST to 70.118.207.71:51255 from 66.24.234.152:56364
122752.766488 OLD STATE(TESTING)->NEW STATE(TESTING)
122752.915604 *** event (66.24.234.152:55805->70.118.207.71:51255) fired ***
122752.915744 BINDING_REQUEST to 70.118.207.71:51255 from 66.24.234.152:55805
122752.915760 OLD STATE(TESTING)->NEW STATE(TESTING)
122754.555966 (ICEConnCheck.c:200) connectivity check timed out...
122754.556079 (ICEConnCheck.c:553) RecvAndProcess failed (80150017)
122754.556257 (ICEConnCheck.c:635) Connectivity check returned (80150017)
122754.556707 connectivity check thread(-1327992832) end...(80150017).
122754.556770 Retry using classic invitation sequence.
122754.557007 <<<<<<<<<< Conference initiation API version 1 >>>>>>>>>
122754.557470 [ipAndPortData length] = 120
122754.557487 Length is valid: YES
122754.557553 CALLEE: ifname=[en0], IP=[192.168.1.101:16402]
122754.557593 CALLEE: ifname=[external], IP=[70.118.207.71:16402]
122754.557626 CALLEE: ifname=[], IP=[70.118.207.71:51255]
2009-02-25 12:27:54.557 iChat[3822:16b13] IPAndPortList: (
ip = "192.168.1.101";
port = 16402;
ip = "70.118.207.71";
port = 16402;
ip = "70.118.207.71";
port = 51255;
122754.558711 SIPConnect start...
122754.558751 ER_AddFilter (2): Adding [hippyjm2]->[u0]
122754.558915 ER_AddFilter (3): Adding [192.168.1.17]->[lip]
122754.558928 ER_AddFilter (4): Adding [192-168-1-17]->[lip]
122754.558940 ER_AddFilter (5): Adding [192.168.1.101]->[rip]
122754.558950 ER_AddFilter (6): Adding [192-168-1-101]->[rip]
122754.559148 TAInviteClientProc Thread start...
122754.559226 ( )( )( )( )( ) TP IS BINARY? (0)
122754.559409 Send to 192.168.1.101:16402 [INVITE sip:[email protected]:16402 SIP/2.0
Via: SIP/2.0/UDP 192.168.1.17:16402;branch=z9hG4bK6992bc811ae8a816
Max-Forwards: 70
To: "hippyjm2" <sip:[email protected]:16402>
From: "pcmofo1" <sip:[email protected]:16402>;tag=849924252
Call-ID: a2ca937e-0361-11de-bfd8-b95bc9334012@192-168-1-17
CSeq: 1 INVITE
Contact: <sip:[email protected]:16402>;isfocus
User-Agent: Viceroy 1.3
Content-Type: application/sdp
Content-Length: 724
v=0
o=brett 0 0 IN IP4 192.168.1.17
s=pcmofo1
c=IN IP4 192.168.1.17
b=AS:2147483647
t=0 0
a=hwi:17412:2:2400
a=iChatEncryption:NO
a=bandwidthDetection:YES
m=audio 16402 RTP/AVP 110 121 12 3 0
a=rtcp:16402
a=rtpmap:121 speex/16000
a=rtpmap:122 speex/8000
a=rtpmap:113 X-AAC_LD/44100
a=rtpmap:110 X-AAC_LD/22050
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:2622513995
m=video 16402 RTP/AVP 123 126 34
a=rtcp:16402
a=rtpmap:123 H264/90000
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16402 VIDEO 16402
a=fmtp:126 imagesize 0 rules 20:640:480:640:480:20
a=fmtp:123 imagesize 0 rules 20:640:480:640:480:20
a=rtpID:3063294723
122755.060001 ( )( )( )( )( ) TP IS BINARY? (0)
122755.060709 Send to 192.168.1.101:16402 [INVITE sip:[email protected]:16402 SIP/2.0
Via: SIP/2.0/UDP 192.168.1.17:16402;branch=z9hG4bK6992bc811ae8a816
Max-Forwards: 70
To: "hippyjm2" <sip:[email protected]:16402>
From: "pcmofo1" <sip:[email protected]:16402>;tag=849924252
Call-ID: a2ca937e-0361-11de-bfd8-b95bc9334012@192-168-1-17
CSeq: 1 INVITE
Contact: <sip:[email protected]:16402>;isfocus
User-Agent: Viceroy 1.3
Content-Type: application/sdp
Content-Length: 724
v=0
o=brett 0 0 IN IP4 192.168.1.17
s=pcmofo1
c=IN IP4 192.168.1.17
b=AS:2147483647
t=0 0
a=hwi:17412:2:2400
a=iChatEncryption:NO
a=bandwidthDetection:YES
m=audio 16402 RTP/AVP 110 121 12 3 0
a=rtcp:16402
a=rtpmap:121 speex/16000
a=rtpmap:122 speex/8000
a=rtpmap:113 X-AAC_LD/44100
a=rtpmap:110 X-AAC_LD/22050
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:2622513995
m=video 16402 RTP/AVP 123 126 34
a=rtcp:16402
a=rtpmap:123 H264/90000
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16402 VIDEO 16402
a=fmtp:126 imagesize 0 rules 20:640:480:640:480:20
a=fmtp:123 imagesize 0 rules 20:640:480:640:480:20
a=rtpID:3063294723
122755.060967 Dialog(CREATED) Match(STATUS) [a2ca937e-0361-11de-bfd8-b95bc9334012@192-168-1-17]=[a2ca937e-0361-11de-bfd8-b9 5bc9334012@192-168-1-17], [849924252]=[849924252]
122755.061036 TAInviteClientProc Thread end(C00F0041)...
122755.061117 SIPConnect stop(900A002D)...
122755.061188 SIP connect returned 45
122755.061202 ###### Unknown return code from SIPConnect (45)
122755.061560 SIPCloseCall start...
122755.061604 (SIP.c:3666) Cannot find call ID(2)
122755.061624 SIPCloseCall stop(800C0016)...
122755.062019 ### NEW STATE: to: VC_IDLE, from: VC_SIGNALING
122755.062050 ++++++++ confStatusMapRemoveAll
122755.062066 ( ) -- mapUserIDToSecurityInfo cleared --
122755.062090 Preparing to send VCInitiateConferenceCompleted
122755.062179 Invoke delegate method vcc:initiateConferenceCompletedForParty:(hippyjm2) - retcode: -7
122755.382412 MULTIPOINT VC_API OVERRIDE: endConference
122755.382450 userIDToCallIDMap count = 0
122755.386540 Found 1 cameras:
122755.386587 Built-in iSight - 18446744073663414272
122755.386615 selectedCamera returned Built-in iSight
122755.391808 Microphone devices:
122755.391833 Camera_HasAudio = 0
122755.391902 Internal microphone
122755.391965 Line In
122755.392025 selectedCamera returned Built-in iSight
122755.392050 selectedCamera returned Built-in iSight
122755.392199 Selected mic: Built-in Microphone / imic
122755.691701 Connection closed from the child process
122755.697384 cancelPreview returned 0
122755.701478 Selected microphone is Internal microphone.
122759.261758 Get error report.
122759.261794 Filters: 7/20
122759.261802 - [Brett [email protected]](22) ==> [0](1)
122759.261809 - [pcmofo1](7) ==> [0](1)
122759.261816 - [hippyjm2](8) ==> [u0](2)
122759.261822 - [192.168.1.17](12) ==> [lip](3)
122759.261829 - [192-168-1-17](12) ==> [lip](3)
122759.261835 - [192.168.1.101](13) ==> [rip](3)
122759.261842 - [192-168-1-101](13) ==> [rip](3)

I opened all of the right ports. it seems my firewall was randomizing outgoing ports as a security feature and this was messing with the SIP protocol creating a successful connection. I set my outgoing port to be static and now everything works fine!

Throwing error in PR User Exit even after Error is corrected

Hi all,
I have created a User Exit in Purchase Requisition in which User Write a Dept Code in PR Header and against that Dept Code only those User ID can create a PR whose ID and Dept code are inserted in Z table.
When I write a Dept code in PR Header which is not assigned in that Z table against that User ID it is throwing a error and a red error mark is showing in line item but when i correct that ID in header it is still showing the error, my error is not getting refresh. I have written below code, please help where i am getting wrong.
CALL FUNCTION 'BALW_BAPIRETURN_GET2'
     EXPORTING
       type             = 'E'
       cl               = 'ZVWPRMSG'
       number           = 002
*     PAR1             = ' '
*     PAR2             = ' '
*     PAR3             = ' '
*     PAR4             = ' '
*     LOG_NO           = ' '
*     LOG_MSG_NO       = ' '
*     PARAMETER        = ' '
*     ROW              = 0
*     FIELD            = ' '
    IMPORTING
      RETURN           = MESSAGES.
      append messages to ex_messages.
exit.

Hi,
when you're joining your user exit with corrected Dept code, what is the the context of ex_messages and messages?
Maybe you forgot to clear some data.
Regards,
Klaus

IPad 3 Mailboxes not showing even after syncing with iMac and switching on SSL and port readings the same; even tried rebuild. Switched iPad off, rebooted and discovered settings went back to preset?

Hi to all techies,
Ipad3 with new iMail does not show mailboxes. Have tried swithcing SSL on and making port same number 993 as imac; then telling imail in imac to synchronise but to no avail still no mailboxes appearing on ipad mail. My husbands new ipad air worked straight away same OS?

I'm sorry. I probably wasn't clear enough in my response. What I am saying is that one can create mailboxes in the Mac mail app and those mailboxes can be for local storage only - the "on my Mac" mailboxes. Those do sync to any other device. The ability to creat those mailboxes is a feature of the Mac mail app.
You cannot create additional mailboxes on the iPad unless your email account is an IMAP account. I am not familiar with BT internet at all so I don't know if you have IMAP or not. I assume that your husband has the same email provider and if his mailboxes did sync to the iPad, then yours should as well.
You can check to be sure if you don't know if your email account is an IMAP account. If you go to your email account in the iPad Mail app and look at the window where your inbox, trash folder and sent folder are - if there is an Edit button at the top of the window - tap that and then tap Add Mailbox at the bottom. If an new mailbox appears, you have IMAP.
If the Edit button is not there - you cannot create folders on the iPad. Your email account is not IMAP. Only IMAP email accounts can create folders on the iPad. Any folders that you would already have in an IMAP account would sync to the device as well.

CO12-Yield quantity shown is zero even after confirmation with correct qty.

Similar Messages

Maybe you are looking for