CO24 missing parts info

Hi Gurus,
Is component ATP info in CO02 consisitent with missing parts info in CO24?
An order in status created but not released is ATP OK using CO02, but is reported as Parts Missing in CO24, what is the reason behind?
Thanks,
Dawson

Hi,
Check rule used for Availablity check in Order is diffrent from Missing Part List .
Missing Part List will use check rule from Plant Parameter (OPPQ) perhaps Order will use Check control (OPJK)
Use same Check rule for both of them.
Regards,
Velmurugan S

Similar Messages

CO24 Missing Part problem

Dear All,
due to non availability of stock (CO24 missing parts report is not giving correct materials)
Could anyone give me the solution for this query
we have to stop the production its very urgrnt.
Thanks
Max

Dear Mayur,
what is the exact query
CO24 is to check the Production orders missing parts only
How are you saying it is showing wrong
Check in MMBE also date wise stock in MB5B
Regards
Madhu

Co24 missing parts list does not show material with shortage

Dear All,
I have a following problem: a production order with status MSPR which has 2 components in the missing parts list from availability check (inside that PO).
In Co24 tcode system does not show any missing parts for the same production order.
For these missing parts i have shipping notifications with an exeption message 10: "bring process forward".
My question is why Co24 does not show missing parts while they are shown in the production order if click on ATP check button.
Is there any interconnection with expection messages to bring process forward?
Thanks for your help!
Regards, Andrey

It seems that at the stage when atp check was run last time there were no reciepts for missing parts. When i was doing ATP check in production order i didn't save results thus respective table was still containing old results.
After i saved results of ATP check in production order missing parts were dispayed in Co24 as expected.

Missing Part Info system

Dear friends
I tried missing order infosystem using Tcode CO24..
Following message is coming "Missing part information system
cannot be used start report PPCOXPR1"
what are the possible reasons.. what i have to activate..
regards,
srihari.,

Hi,
Start the report PPCOXPR1 with the T.code SE38 or SA38.
This is required for the first time..
Start this and revert for further discussion..
Do not do this on your Productive system..
First check with your Test System..
Regards,
Siva

Sales Order no in CO24 missing parts list

Missing parts CO24.
I am having trouble bringing the Sales Order field populated into the missing parts information system.
It seems that when RESB is populated with the sales order it brought through to the report but I have some Assembly Orders (82) that have a Sales Order but this is blank in the missing parts and therefore blank in RESB u2013 why would this be blank in RESB?
This is extremely frustrating as the users are asking me why have a Sales Order field that will not populate?
Could someone explain the logic of what conditions there are for the Sales Order number to appear in CO24 ?

Hi,
In case of make-to-order scenario, the components are not managed on the sales order special stock, since the field special stock for the components is empty.
Therefore, the sales order number is not copied to the reservation and it is not available on CO24.
If you would like to have this field displayed in CO24, you should manage the components on the individual sales order stock, instead of using collective requirements.
I hope this helps.
Regards,
Marcelo

CO24 missing parts list

Hi All,
Till last week the missing parts list for a particular MRP controller showed many parts but since this week it only shows some parts and we are not able to find out the difference between what is expected and what it is showing.
Can somebdy guide me through the exact process how it searches for missing parts through Availability check.
Thanks
Shailesh.

Dear Shailesh
Last week there might be No stock for componets, so system might have shown many componets list
but this week, enough stock might be availble for componets, so system is not showing missing parts
just check in MMBE for required components stock
Regards
kumar
Edited by: kumar kumar on Sep 9, 2009 12:26 PM

Missing Part Info Sys for WBS element wise

Hello Experts,
How can i found missing list in details by giving input WBS element instead of any Material in CO24?
or please suggest me any other way to find the list WBS elementwise.
Thanks with regards.
Prashant

Hi
In CO24 selection from reservations enter plant and WBS elements and execute the report.
Select the Layout 000000000001 for material View
Thanks
S.Murali
Edited by: S. Murali on Jul 13, 2009 4:33 PM

How to find Missing Parts for a particular Process Order?

Hi,
How to find Missing Parts for a particular Process Order ?
Is there any function module or Table ??
Thnx in Advance.

Hi prince roy
you can use the T-code = <b>CO24 - Missing Parts Info System</b>
if helpful PLEASE REWARD YOUR POINTS
thanks
chakri

Availbility - Missing Parts - Function Module / Utility

Hello,
I am wondering if we have any standard SAP Functionality i.e a Function Module / Other where we can pass a production order # as an input and the result gives the list of all Missing Parts for that Production Order.
Appreciate any kind of inputs.
Best Regards,
Bharat.

Hi Bharat,
You can use sap std report or table to get list of missing parts, i dont think sap have function module on this requirement
STD Report
CO24 - Missing Parts Info System
Table
RESB - Reservation/dependent requirements
Regards,
Sankaran

Overview Missing Parts

Hi All,
In a production order there is an Overview for missing parts. It has information like committed quantity and committed date. We are looking for a standard SAP report that would give us this information by production order and material instead of having to look at each production order individually. Although we are not new to SAP, the PP and manfacturing part of SAP is new to us. Any help would be appreciated. We are familiar with transactions like COOIS, ect. But when getting into the detail of the Production orders the reports are more scarce.
Thanks,
Mark

Dear,
In COOIS report you can filter your report with system status "MSPT". It will give you all list of material with system status "MSPT". Also you can use report CO24 which is "missing part info system"
Hope it helps you.
Regards,
Alok Tiwari

Missing Parts List While creating Prd. Order

Hi Friends,
My client is creating production Orders Manually thru CO01and While Creating & Saving The Production Order System Is Not Supporting In Giving Missing Parts list In spite Of Deficit of Un Restricted stock inStorage Location For BOM components used in that Order.
To my surprise when the defisit is for all the BOM components only one component is showing as missing part in missing parts list.
But While confirming the order The system is showing missing parts for all the components which are defisit for order confirmation.
I Tried To Get This From the Following Method
Checked For Define checking control In OPJK.
Selected plant, Order type & selected the business function 1 for create or 2 for release. And Maintained These Settings
a) Removed tick mark in No Availability check.
b) Type of component check Given as - ATP check.
c) Material release - 1. User decides on release if parts are missing.
d) PP Checking rule (Which Is same As with plant parameter OPPQ)
e) In Define scope of check (OPJJ) made a tick mark in check w/o RLT.
Then Assigned the availability checking group at Mrp View of Header material.
In spite Of All These Settings Still At The Time Of Order Release/Save A Warning Massage Or A Informative Massage Is Not Appearing
*Please Suggestu2026u2026u2026u2026*
hari

Hi,
Please check same checking rule use in Material master and with order type and plant?
Check the cheking group in material master MRP3 view for all material.
Go to Transection OPJJ - Maintain scope of check,
Select your Checking rule which you have assing to your order type and tick INLCUDE RESERVATION.
(1). CO24- Missing Parts Information System
Under this transaction you choose Selection from Reservations and then select Plant & Material then you can get Missing Parts List for your respective material without production / planned order also.
(2). COOIS : Production Order Information System
Under this transaction you need to Select in List option as Components and then go on Selection Tab.
For collective availability check use
COHV - Excute the roport w ith collective avaliabilty check.
COMAC.
Hope this help.
Regards,
R.Brahmankar

Missing part list in plant maintenance ( CO 24)

Hi SAP experts,
Is it possible to use the transaction CO24 ( missing part list) for plant maintenance orders? If yes, what are prerequesites & configurations needed for it?
Regards

Hi,
I think CO24 can be used for Maintenance Orders too.... as there is no order category field mentioned in the selection screen.
Try for one the PM order and check ... currently I don't have any PM order other wise I would have checked and let you know....
Hope thsi will help you.
regards
radhak mk

How to reconstruct the missing parts list (co24)

Dear All
How to reconstruct the missing parts list (co24).by using report PPCOXPR1.?
Rgds
Pankaj Agarwal

Hi Pankaj,
You need to run the program "PPCOXPR1" using SE38. This program will create missing part index in RESB table.
Hope this helps you, Reward your points.
Regards,
Prasobh

Missing Parts List History (CO24)

Hello,
is there a possibility within ERP 6.0 to see a history for missing parts in co-orders like in CO24.
I want to create a TopN report for the missing parts of the past. CO24 seems to be only relevant for the current parts that are missing.
Thanks in Andvance
Markus

Hello Timothy
Transaction CO24 considers the settings defined on the scope of check (transaction OPJK), therefore, it may include another receipts instead of only checking the availability against the stock.
Please go to transaction CO24 and check exactly the elements that you want to consider on the ATP check (none if you want to check the availability against stock).
BR
Caetano

Missing Parts report for Purchase Orders

Hey Gurus,
We are running the availability check for Purchase orders and the user group is wondering if there is a standard Missing Parts report in SAP similiar to transaction CO24 for Purchase Orders so that they can view all of the Purchase orders with missing parts.
As a side note, we are using subcontracting purchase orders.

didn't get a response.

CO24 missing parts info

Similar Messages

Maybe you are looking for