CO54 Help

helo Gurus:
After the creation of the Master recipe I have to go to the CO54 and I want to know if theres is any JOB I can use to make this automatic?
Thanks in advance

Hi Adrian,
are your sure you mean Co54, not Co53?
If you want to send the process messages, like in CO54 you can use report RCOCB002 or RCOCB004
If you want to send the control recipie , diaog transaction CO53, you can use report RCOCB015.
Hope this help.
Regards,
Sabine

Similar Messages

CO54: Message is not sent to any destination: Commit Work is getting failed

Hello,
While processing the Messages from XFP to SAP Update is getting terminated due to the use of Commit Work. SAP Note 147467 - Update termination when sending process messages has been referred which is for 4.6C, but we are in ECC6.0.
While processing the message in second iteration Commit Work triggres and Update happens in the data base.
Following Issue is only concerned with Nested HUs
T-Code used CO54
Following are the analysis:
it looks like u201CCreate and Post a Physical Inventory Docu201D is failing in the initial processing because the inventory doc is created when the Transfer Order to the PSA (or the TO from the PSA) is not yet completed (quant is still locked somehow).
CO54, process message category=ZHU_CONS: HU to be consumed is a nested pallet (unpacking/ repacking and TOs to/from) and qty to consume is greater that HU qty in SAP (creation of a physical inventory doc is required).
1. The error occurs while clearing the inventory posting for the physical inventory document.
2. The surprising factor is the u201CProcess Messageu201D is not processed correctly for the first time.
3. Indeed it is successfully processed without any error if you do process it second time.
Error Log from C054 T-Code.
02.08.2010                                         Dynamic List Display                                                1
Type
Message text
LTxt
Message category: ZHU_CONS ---    Process message: 100000000000000621   "Send to All Destinations" Is Active
Message to be sent to destination:
ZHGI ZPP_0285_XFP_GOODSISSUE Individual Processing Is Active
=> Message will be sent to destination (check log for destination)
Message category: ZHU_CONS ---    Process message: 100000000000000621   "Send to All Destinations" Is Active
Message destination ZPP_0285_XFP_GOODSISSUE triggered COMMIT WORK
Input parameters OK, passed to source field structure
Step 0: Now checking if scenario with HU
Step 2: Scenario with HU, Now checking if HU nested
Step 3: HU nested, checking if HU in repack area
Step 4: HU not in repack area, moving it to repack area
HU moved to repack area, TO number 0000000873
Step 5: Depacking nested HU...
Nested HU depacked, HU pallet n°: 00176127111000461994
Steps 6-7: Moving back HUs to supply storage type / bin...
HU 00376127111000462001 moved back to original area with TO number 0000000875
Steps 6-7: Moving back HUs to supply storage type / bin...
No need to move back HU 00176127111000461994 (not in table LEIN)
Step 8: Checking if HU fully used and quantity matches HU system quantity
HU not fully used but picked quantity > HU quantity: inventory necessary
Step 9: Inventory needed, creating physical inventory document...
Physical inventory document 0000000126 created
Step 10: Adding weighted quantity on inventory document...
Weighted quantity entered in document 0000000126
Step 11: Posting rectification in inventory document 0000000126...
Physical inventory document 0000000126 rectified
Error: rectification for doc 0000000126 not updated in DB!
=> Destination ZHGI ZPP_0285_XFP_GOODSISSUE can currently not process the message
=> Message is not sent to any destination
The errors in SM13 for this contain the program SAPLZPP_0285_HUINV_ENH (creating/changing the HUM physical inventory doc). WM Function module L_LK01_VERARBEITEN is also involved.
From SM13, it displays the following piece of code in include LL03TF2M (read the LEIN table=Storage Units table):
WHEN CON_LK01_NACH.
       IF (LEIN-LGTYP = LK01-NLTYP AND
             LEIN-LGPLA = LK01-NLPLA) OR
              NOT P_LEDUM IS INITIAL.
       ELSE.
Das ist der Fall einer TA-Quittierung wo Von-Hu = Nach-HU ist und sofort die WA-Buchung erfolgt. Dann steht die HU noch auf dem Von-Platz, daher darf hier kein Fehler kommen, sondern es wird ein. Flag gesetzt, daß verhindert daß die LE fortgeschrieben wird.
         FLG_NO_LE_UPDATE = CON_X.
        MESSAGE A558 WITH P_LENUM.
       ENDIF.
Translation in English of the German text via Google:
"This is the case where confirmation of a TO source-HU = destination-HU, and now the WA (Good Issue?)- made book. Then, the HU is still on the From-space may therefore come here not a mistake, but it sets a flag that prevents that the LE is updated."
Thanks and Regards,
Prabhjot Singh
Edited by: Prabhjot Singh on Aug 2, 2010 4:39 PM

Hope you have carried out following things in Production ( Please refer to SAP help before actually doing it in production).
1. Transport the predefined characteristics from the SAP reference client (000) to your logon client.
2. Adopt Predefined Message Categories - In this step, you copy the process message categories supplied by SAP from internal tables as Customizing settings in your plants.

Email for process message failure in CO54

Hi
Does anyone know if it is possible to send auto generated emails for process message terminations in tcode CO54?
Regards
Werner

Hi Rohit,
You can maintain the email ids in following two reports for any queue blockage in outbound and inbound queue -
/SAPAPO/RCIFQUEUECHECK - For Outbound queue Faiure
/SAPAPO/RCIFINQUEUECHECK - Sends notifications in the event of inboundCIF errors
Here you can specify the -
1. CIF name/initials like CF*
2. Name/Distribution List to which mails should be triggered
3. Target system name
4. Other settings as needed
Moreover, you can schedule these reports as periodic background jobs scheduled to run every 30 minutes/1hour as per business requirement.
This will send emails whenever any queu failure occurs.
Hope it helps you.
Regards,
Alok

Send email automatically when a process message errors out in CO54.

Hi,
I am looking for a standard method to send an email to the user when a process message errors out in CO54.
Is there anyway to do it in standard SAP system? Please let me know.
Thanks!

did you enable the email notification on the issue list...... List Settings -> Advance
Settings option.
check this, step by step guide.
http://ceekam.com/blog/?p=1137
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Use of CO54

Hi All,
We are doing goods issue, phase wise confirmation and goods receipt through PI sheet.
But the postings are not happening automatically. If we go and clear from transaction CO54, then only the messages PI_CONS, PI_PHST and PI_PROD are sent and then goods issue, confirmation and goods receipt postings are happening.
Please explain whether CO54 is for error processing like COGI or is an essential step.
Thanks and Regards,
Satya
Edited by: sathyanarayana naini on Jun 27, 2008 4:34 PM

Hello Sathyanarayana,
There should be a background job scheduled to send the Process messages to the corresponding destinations.
This should be a event triggered back ground job scheduled which will send the Process Messages automatically.
Here, you may refer the help at the configuration node in the Process messages --> create job for sending Process messages , from where you can find the program name for which the job needs to be scheduled.
Thanks
Mahesh

Possible Messages that will prompt when we do CO54 and COR2 to TECO the PO

Hi,
We have an issue for a customize program for TECOing process order. This transaction calls transaction CO54 (to send messages automatically) and COR2 to TECO the process order.
The error encounteered by the user is "sending message failed" wherein in fact message has already been sent because TECO box has been marked ok. The error occurs when a user tick the execute button and programs calls the CO54 and CO60 transactions and a message will prompt within the program. Sending of messages has BDC and we are having a problem checking the possible messages that will cause the sending message failed. There are two scenarios we have found. One is when a user is accessing a particular operation in the PI Sheet and another Process Order is being TECOd having the same operation. Another one is the "sent" message that is triggered once message has been successfully delivered.
Hope you could help us with this.
Thank you
-Lyncel

Hi Lyncel,
Please check the Control Recipe Destination settings.
Thanks and regards
Murugesan

Background Job to CO53 and CO54

Hello All
What are the programs to CO53 and CO54 ? I need to schedule the Jobs for background transmission and I don't know the program names
Tks in advance

Do you mean the background jobs for sending control recipes and process messages? If so...
Control recipe send = RCOCB006 and you need to set the job to run after event SAP_NEW_CONTROL_RECIPES
Process message send = RCOCB002 (cross plant) and RCOCB004 (specific plant). You need to create variants for these.
Check the IMG documentation in PPPI for control recipes and process instructions where there is more information about this. Also standard SAP help is quite good on these points.
Finally, if you are automatically generating process instructions then you need program RCOCRPVG plus appropriate variants.
Regards
Laurence

Problem with threads and simulation: please help

please help me figure this out..
i have something like this:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class DrawShapes extends JApplet{
     private JButton choices[];
     private String names[]={"line", "square", "oval"};
     private JPanel buttonPanel;
     private DrawPanel drawingArea;
     private int width=300, height=200;
     public void init(){
          drawingArea=new DrawPanel(width, height);
          choices=new JButton[names.length];
          buttonPanel=new JPanel();
          buttonPanel.setLayout(new GridLayout(1, choices.length));
          ButtonHandler handler=new ButtonHandler();
          for(int i=0; i<choices.length; i++){
               choices=new JButton(names[i]);
               buttonPanel.add(choices[i]);
               choices[i].addActionListener(handler);
          Container c=getContentPane();
          c.add(buttonPanel, BorderLayout.NORTH);
          c.add(drawingArea, BorderLayout.CENTER);
     }//end init
     public void setWidth(int w){
          width=(w>=0 ? w : 300);
     public void setHeight(int h){
          height=(h>=0 ? h : 200);
     /*public static void main(String args[]){
          int width, height;
          if(args.length!=2){
               height=200; width=300;
          else{
                    width=Integer.parseInt(args[0]);
                    height=Integer.parseInt(args[1]);
          JFrame appWindow=new JFrame("An applet running as an application");
          appWindow.addWindowListener(
               new WindowAdapter(){
                    public void windowClosing(WindowEvent e){
                         System.exit(0);
          DrawShapes appObj=new DrawShapes();
          appObj.setWidth(width);
          appObj.setHeight(height);
          appObj.init();
          appObj.start();
          appWindow.getContentPane().add(appObj);
          appWindow.setSize(width, height);
          appWindow.show();
     }//end main*/
     private class ButtonHandler implements ActionListener{
          public void actionPerformed(ActionEvent e){
               for(int i=0; i<choices.length; i++){
                    if(e.getSource()==choices[i]){
                         drawingArea.setCurrentChoice(i);
                         break;
}//end class DrawShapes
class DrawPanel extends JPanel{
     private int currentChoice=-1;
     private int width=100, height=100;
     public DrawPanel(int w, int h){
          width=(w>=0 ? w : 100);
          height=(h>=0 ? h : 100);
     public void paintComponent(Graphics g){
          super.paintComponent(g);
          switch(currentChoice){
               case 0:     g.drawLine(randomX(), randomY(), randomX(), randomY());
                         break;
               case 1: g.drawRect(randomX(), randomY(), randomX(), randomY());
                         break;
               case 2: g.drawOval(randomX(), randomY(), randomX(), randomY());
                         break;
     public void setCurrentChoice(int c){
          currentChoice=c;
          repaint();
     private int randomX(){
          return (int) (Math.random()*width);
     private int randomY(){
          return (int) (Math.random()*height);
}//end class drawPanel
That one's from a book. I used that code to start with my applet. Mine calls different merthod from the switch cases. Say I have:
case 0: drawStart(g); break;
public void drawStart(Graphics g){
/* something here */
drawMain(g);
public void drawMain(graphics g){
g.drawString("test", x, y);
//here's where i'm trying to pause
//i've tried placing Thread.sleep between these lines
g.drawLine(x, y, a, b);
//Thread.sleep here
g.drawRect(x, y, 50, 70);
}I also need to put delays between method calls but I need to synchronize them. Am I doing it all wrong? The application pauses or sleeps but afterwards, it still drew everything all at once. Thanks a lot!

It is. Sorry about that. Just answer any if you want to. I'd appreciate your help. Sorry again if it caused you anything or whatever. .n_n.

Query Help

Table1:
ou store point
LS LIB1 50
LS LIB1 200
LS LIB1 100
LS LIB1 79
I have to insert table1 to table2 by splitting into every 143point and assing serial number for every 143 from parameter.
in aboce example we can split 3 time 143 like below table2 sample.
Table2
ou store point serial_number
LS LIB1 50 101
LS LIB1 93 101
LS LIB1 107 102
LS LIB1 36 102
LS LIB1 64 103
LS LIB1 79 103
i tried below procedure its not working.
table may have any order like below.
Table1:
ou store point
LS LIB1 200
LS LIB1 50
LS LIB1 100
LS LIB1 79
then table2
ou store point serial_number
LS LIB1 143 101
LS LIB1 57 102
LS LIB1 50 102
LS LIB1 36 102
LS LIB1 64 103
LS LIB1 79 103
create or replace procedure assign_serial(from_num number,to_num number) is
bal number(10);
begin
bal := 0;
for c1 in(select * from table1)
loop
if c1.point <=143 then
if bal=0 then
bal=143-used;
insert int0 table2 values(c1.ou,c1.store,used);
elsif used > 0 then
used=used-bal;
insert int0 table2 values(c1.ou,c1.store,bal);
bal=0;
if used > 0 then
insert int0 table2 values(c1.ou,c1.store,used);
end if;
bal:=143-used;
end if;
end loop;
end;
How to split and assign serial number,please hELP.

.after giving serial num i have to change points in table1 to 0.The problem for SUm and split for every 143 is ,different OU and store is there.we have to know for which store points we earned serial number.
i hope this below logic little satisfy except assign cardnum,please........ check and currect the logic
LS LIB1 50
LS LIB1 200
LS LIB1 100
LS LIB1 79
--variable used and bal
for c1 in(select * from table1)
loop
used := c1.points;
if c1.point <=143 then
if bal=0 then
bal=143-used;
insert int0 table2 values(c1.ou,c1.store,used);
elsif used > 0 then
used=used-bal;
insert int0 table2 values(c1.ou,c1.store,bal);
bal=0;
if used > 0 then
insert int0 table2 values(c1.ou,c1.store,used);
end if;
bal:=143-used;
end if;
end loop;

Help my safari doesnt open and gives me a crash report

help my safari doesn't open and gives me a crash report ever since i downloaded a file from the internet. I have a macbook air (early 2014) with running os x yosemite version 10.10.1

There is no need to download anything to solve this problem.
You may have installed the "Genieo" or "InstallMac" ad-injection malware. Follow the instructions on this Apple Support page to remove it.
Back up all data before making any changes.
Besides the files listed in the linked support article, you may also need to remove this file in the same way:
~/Library/LaunchAgents/com.genieo.completer.ltvbit.plist
If there are other items with a name that includes "Genieo" or "genieo" alongside any of those you find, remove them as well.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those. If Safari crashes on launch, skip that step and come back to it after you've done everything else.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, then you may have one of the other kinds of adware covered by the support article. Follow the rest of the instructions in the article.
Make sure you don't repeat the mistake that led you to install the malware. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates
if it's not already checked.

Apple Mini DVI to Video Adapter is not working. Please Help...

I bought an Apple Mini DVI to Video Adapter to connect my Macbook to a TV using normal video cable. When I connect the cable, my Laptop DIsplay gives a flickr once and then it shows nothing. I checked Display in the system preference where I don't get a secondary monitor option. My TV is panasonic and it's an old one. I work on Final Cut Pro and it's very very important to see my videos on a TV. What am I doing wrong with the connection? Anyone Please Please help...

Your probably not doing anything wrong. There are thousands of users with Similar issues and it seems to be with many different adapters.
We have Mini DP to VGA (3 different brands) and they all fail most of the time. This seems more prevalent with LCD Projectors. I've tested some (50+) with VGA Monitor (HP) and they all worked, LCD Projector (Epson, Hitachi, and Sanyo) and they all fail, DLP Projector (Sanyo) and one worked.
My Apple Mini DP to DVi works most of the time. My Mini DP to HDMI (Generic non Apple) works every time.
The general consensus is that Apple broke something in the OS around 10.6.4 or 10.6.5 and its not yet fixed. As we are a school we have logged a case with the EDU Support group so will see what happens.
Dicko

Mini dvi to video adapter help pleaseeeeeeeeeeeeeeeeeeeeeeeeee

right,
ive got a 20" intel imac. i bought a mini dvi to video adapter.it said it works with the intel macs.
i maybe being a bit thick here but the end of the dvi seems to be a different size to the port on the mac.
please help....................

You might find relief in the iMac Forum. Perhaps they will appreciate your distinctive thread header style more fully.
good luck.
x

PSE icons instead of the photo. I need to view photos at a glance. Please help me????

Please help, this is driving me crazy. I have downloaded my free PSE #9, it came with my Leica Camera. I cannot view at a glance any of my photos. There is only an icon that reads, PSE. To view any of my photos, I must click select and then preview. This gets old, and I am doing 4 times the work. I am having to use the dates to guess where my photos might be. I hate this! My old Photo Shop #5 didn't do this. When you went to my pictures, you could see every photo.
I have tried the right click and open as any program. What ever program I choose, that is the icon that appears. No photo. Still no good.
Please help.
Thanking anyone in advance,
Leica

Hi,
Are you using Windows Explorer to view the files?
If so, load Explorer, go to the Tools menu and select Folder Options.
Click on the View tab and make sure the first option (Always show icons, never thumbnails) is not checked.
Click on OK and see if that is any better.
Brian

IPOD NO LONGER RECOGNIZED BY ITUNES - HELP!!!!!!!!!!!!!!!!!

When connecting to I-Tunes my Ipod now appears only as 'IPOD'
The Windows 'Autoplay' box appears on the left hand side of my screen.
Everything then freezes for a short while then an error message says that I-Tunes has detected an Ipod that is corrupted.
My Ipod itself is fine so I'm reluctant to restore if that will not solve the problem.
Is something to do with an automatic software update?
Please help......................
Advent Windows XP

iOS: Device not recognized in iTunes for Mac OS X
Do not omit the additional information pararaph.

HT203164 help! i am using itunes 10.6.1.7 and windows vista 64. itunes will no longer burn cds. i have searched online and tried all i saw that could possibly fix it and it is still not working.

i have tried:
reloading itunes
unchecking 'write'
removing lower filters in regedit
ensuring i had the correct 'gear' info in the upper filters in regedit
removing 'gear' from regedit, system32
reloading updated version of 'gear'
cleaning my registery
deleting itunes
cleaning registry again
reloading itunes
cleaning registry again
i still cannot burn cd. t i can import and play cds in itunes and i can watch dvds. itunes will just not burn to blank cds, and i have tried sever new blank cds, each is not recognized.
i do not know what else to do, i have searched the internet and whatever i saw doable i tried.
when i check the cd drive in itunes i had gotten a 4220 error, cnet advised to download a free error fixer, however, this error fixer gave me and enduser message, so that didn't work.
the diagnostic for the cd burner read that i had to put in a formatted disc with content so i did and there are the results of that were that it read the cd and that the 4220 errir code was encountered last time there was an attempt to burn.
and 'could not open cd handler 32. there is a problem with the installation of the drive in windows or the drive contains a copyprotected cd.
the above is not the case as it also popped up for me to import cd to itunes.
i tried to copy and past the entire contents here but it would not allow me to paste.
please help!

I too have only recently encountered this problem. I have been able to burn disks before but it keeps making all these weird sounds. It might be a hardware problem but the fact that everything else that uses a disk works I doubt it.

CO54 Help

Similar Messages

Maybe you are looking for