CO78 -- orders to be set DLFL with plant specified in variants

Hi,
I am using T.Code CO78 in order to set deletion flag for production orders. In the maintain variants screen if we select only the plants, with maximum number of entries as 99999 and exceeding of delivery date as 90 days. which are the orders which would be picked for deletion i.e production orders with which status will be selected for archieving.
Please reply at the earliest.
Thanks in advance,
Priyajit.

hi
its depends upon period wich u r given in that particular period wat ever status for order weteher it completed ,relese , partially completed all the data gose in archiving.its gest time validdity period .if any in puts plz.......

Similar Messages

I want to Facetime my Ipad from my Iphone but they are both set up with the same Apple id. Do I need to create a new id for one of them in order to facetime with the other?

I want to Facetime my Ipad from my Iphone but they are both set up with the same Apple id. Do I need to create a new id for one of them in order to facetime with the other?

You should be able to call the iPad using your Apple ID from the iPhone. When calling from iPad use the iPhone's phone number to initiate the call.

PR: Procurement w/o material from vendor with plant assignment not defined

Hi,
Getting the error message: 06806 - Procurement w/o material from vendor with plant assignment not defined
while creating the PR with account assingment (P- project) & without material no. instead entering the short text in the PR.
this issue (Error message) is getting to only one user.
question-1: Is it possible to set the Error messages to the user specific. Because other users are able to create the PR with the above inputs, but the one user is not able to create instead getting the above E- Msg.
question-2: Is it possible to set the messages to Plant specific instead quesiton -1 or both
Or else, please let me know how to deactivate the above E-msg to the specific user.
Please do the needful asap.
Regards,
Sapsrin

Hi,
As you noticed, note 856962 has changed the system behaviour
when you are working with procurement w/o material from vendor with
plant assignment.
Items without a material master record can only be ordered from vendors
without a plant assignment.
This note will stop your users from creating service purchase orders
for a vendor who has a Plant assigned in the vendor master, issuing
the error message 06 806.
you can check the below code:-
LMEPOF23
IF ekpo-ematn IS INITIAL AND
      ( aktyp EQ hin OR ekko-reswk NE oekko-reswk OR      "856962
     ( aktyp EQ hin OR NOT ekko-reswk IS INITIAL OR        "856962
        ekko-bsakz NE oekko-bsakz OR
        gf_extended_check NE space ).
    PERFORM enaco_2(sapfmmex) USING '06' '806'.
regards,
Lalita

HT204053 I share an iTunes account with my daughter, I just got an ipad and need to set up with my own I'd for iCloud sync how can I keep my apps and music?

I share an iTunes account with my daughter, I just got an ipad and need to set up with my own I'd for iCloud sync how can I keep my apps and music?

ColleenMcG wrote:
You can continue to share the same iTunes account ID with your daughter and set up a separate iCloud account with a different ID.
=> is this a different iCloud account for each device? I thought iCloud account ID had to match some iTunes account ID, for which we only have one i Tunes account?
You need to set up a separate iCloud account for each person that does not want to share their iCloud data. If you share an iCloud account with someone, any data you both sync with the shared account is merged, and you end up with each other's data on your device(s). If, for example, you owned two devices and someone else in the family also owned two devices, you would both want your own iCloud accounts, and you would each set up your personal iCloud account on the two devices you own. In other words, you want a separate iCloud account for each person to be used on the devices they own. Each iCloud account has to have a separate Apple ID. The ID does not need to be the same as the ID used for iTunes. Many families perfer to share the same iTunes account/ID, but maintain separate iCloud accounts with different IDs to keep there data separated.
ColleenMcG wrote:
It does not need to be the same as the ID used for iCloud.
=> what ID, iTunes? So I can have a separate iCloud account "only" ID which I also assume must be some [valid] email address? The children currently do not have email accounts anywhere.
Yes, I was referring to the iTunes ID not needing to be the same as the ID used for iCloud. In order to set up an Apple ID your children will need to have a valid email address that can be verified by Apple. Apple requires this so they have a way of contacting the owner if there is a problem with the account, such as when you may need to reset the password on the account. When you set up the ID, Apple will send a verification email to this email account and you will need to click on the verificating link in the email to complete the process. If they don't currently have an email account you can just set one up with gmail or another free email hosting service. They don't have to use the account but you will need it to set up the ID.

What is wrong with my shipping address? I want to order pictures via apple store with iPhoto. Apple Id and payment seem ok. My current and correct shipping address appears with red letters. Why and what to do?

What is wrong with my shipping address? I want to order pictures via apple store with iPhoto. Apple Id and payment seem ok. My current and correct shipping address appears with red letters. Why and what to do?
Maybe this is relevant: I bought iphoto from the German apple store but I now live in Italy. I have tried German credit card with German invoicing address and Italian shipping address. And I have tried Italian credit card with Italian invoicing address and Italian shipping address. The phenomenon is the same: shipping address appears in red and I am asked to fill in the mandatory fields (which turn red whatever I enter).

KarinavD,
what is the setting for the Print Products Store in the Advanced Tab of the iPhoto Preferences?
The country you select there has to match the billing address. And your billing address should match the country of your AppleID and credit card used with the AppleID.
Regards
Léonie

Third-party not defined in the case of vendor with plant assignment ?

We use a Third-Party Vendor to direct-ship some products directly to our Customers.
When transfers third party order form's PR STO PO, prompts the following information
Third-party not defined in the case of vendor with plant assignment
Message no. 06769
Diagnosis
You are entering a purchase transaction involving a vendor to whom a plant has been assigned. Normally, this will involve the transfer of materials from one plant to another.
This process necessitates a delivery and a billing document in the SD system. The PO appears directly in the delivery due list of the issuing plant (vendor) and therefore does not need to be transmitted.
However, an item with the procurement form "third-party" (triangular business deal) cannot appear in the delivery due list.
Procedure
An item with the procurement form "third-party" can only be ordered from vendors without a plant assignment.
how should solve?
Many thanks, Adny.
Edited by: Andy Yao on Feb 8, 2010 3:58 AM

Hi Andy
Why u doing stock transfer order,in third party sales there is no stock transfer
Follow below procees for third party sales( Vendor ship materials directly to customer)
Create Sales order(Use item category TAS) >>> Purachase requisition(Automatically from order) >>> Purchase order >>> Vendor Invoice Verification >>> Invoice to customer
Kapil

The order in attribute set is MESSED UP

Hello forum,
Here is an intricate description of my problem:
When I define BRIDGE_TYPE attribute set for Discoverer the sequence of attributes often changes in attribute set without my intervention. This is especially the problem because advanced attribute properties themselves DO NOT change the order. Consequently, I am getting completely messed up. I cannot identify any possible pattern here. I observe it for both dimensions and facts attribute sets.
What's wrong?
Sorry for very vague description of the problem, but that's how it's going on!!!
Another problem is sometimes on the Attribute Sets tab the button "Advanced..." is grayed out for BRIDGE_TYPE. When I move focus to the only one attribute set (BRIDGE_TYPE) and not changing anything press ok (or in some other way move out focus from the record about BRIDGE_TYPE attribute set), I get error message that only one attribute set of type BRIDGE_TYPE may exist. After I press ok for this message, the type of attribute set is automatically changed to USER_DEFINED (of course Advanced button is still grayed out). Then I press ok and open Table Properties again. There I can see two identical attribute sets but with different types: BRIDGE_TYPE and USER_DEFINED. The names of attribute sets are the same, so I have to change name of one attribute set or delete them. If I delete them and create new attribute set of type BRIDGE_TYPE, I am able to go to advanced properties and everything fine, except order problem described above. Again I cannot see any pattern here - this happened only with some of dimensions.
Does anybody observe such a strange behavior? I'm lost and disappointed. :(
Regards,
Alex

I have found a solution for ordering problem but it's realy error-prone. :(
I have determined that order is changed only when I change advanced properties for BRIDGE_TYPE attribute set. If I change them again, the order is back to the previous state, so I can handle it with some efforts. Of course, this is not good way of doing thing, but I don't know better way to handle this.
This trick really slows the work down! If someone experienced similar results, please, share your knowledge.
Regards,
Alex

Check on PO matching profit ctr with plant & cost ctr with plat

Hi Expert ,
                 I am working on Enhance check on restrict purchase prder the logic of matching profit center with plant and cost center with plant . Code is-
IF SY-TCODE = 'ME21N' OR SY-TCODE = 'ME22N'.
LOOP AT XEKPO WHERE KNTTP = 'A'.
read table KNT with key ebeln = XEKPO-ebeln ebelp = XEKPO-ebelp prctr = XEKPO-KO_prctr.
if sy-subrc NE 0 .
MESSAGE ID 'ZMESSAGE' type 'E' NUMBER 005.
/'Asset Profit Center Should be Same as Plant'/
*EXIT.
endif.
ENDLOOP.
endif.
loop at knt.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
EXPORTING
    input         = knt-prctr
IMPORTING
   OUTPUT        = knt-prctr.
modify knt.
endloop.
now i need this ligic with also work in case of service order ( SRO & SER) check asset code (cost center-plant) instead of material code( Profit center u2013plant).
because in service order no material exist
Edited by: Aditya_rkj on Jan 20, 2011 6:06 PM
Edited by: Aditya_rkj on Jan 20, 2011 6:07 PM

hi,
I think your cost centre is not assigned the above given bussiness area...
Take help of FI consultant and check whether its assigned at KS02 or not...
You can also change it...
or
if you are just doing testing, then better use other cost centre which assigned to the above given business area..
Regards
Priyanka.P

REPORT ON G/L accounts with plant wise details .

HI ,
Kindly provide me some standard reports in which i can see the G/L accounts with plant details.
thanks

Dear Muskan,
you can use FBL3N only with GL code provided and from dynamic selection you can add business area or Business place or profit center, which ever is applicable, from change layout. then set filter on these fields, to get the Plant wise details.
you might be knowing that 4.7 SAP use business area concept to bifurcate the line items. and in 6.0 profit center is used for same. FAGLL03 can be used for checking The smae on Profit center level.
Regards
Ashok kumar

How to Create Company and link with Plant

Dear All
Kindly help me to create Company and link with Plant and Storage Location through SPRO.
Kindly trll me TCODE.
Waiting for Reply
Thanks & Regards
Alok

HI,
Go to OX02 and create a company code by copying the standard company code 0001 / 1000
Then go to OX10 and create a plant by copying the standard plant 0001 / 1000
OX09 - maintain storage loaction for the created plant
OX08 - create purchase org copying from standrard 0001 / 1000
Go to OX18 and assign your plant to company code
OX17 assign purchase org to plant
In order to get the tcode go to SPRO and in the top menu click on additional informations - additional information - display key - IMG activity.
After you select this then in the SPRO you have a column additional information comes up. each and every activity in SPRO will have and additional informatiom, in the additional information the last 4 characters is tcode.
Eg : SIMG_CFMENUSAPCOX02 this is the additional information for CC. the last 4 characters OX02 is the tcode
Thanks
Kiran

Procurement w/o material from vendor with plant assignment not defined

While creating standard Framework Order (FO) asset PO I am getting the below error
"procurement w/o material from vendor with plant assignment not defined"
Plz Help
Regards

Dear INDRANIL BHATTA ,
Thanks for your reply and your soluation ,
Finally , I found Vendor Master assignment to plant so it can't create FO PO .
-> XK02 -> selecting "purchasing data" >Extras>Add.Purchasing data.

Stock transfer order (STO) Without delivery and With delivery?

Hi experts,
Could any body explain step by step procedure
Stock transfer order (STO) Without delivery and With delivery?
Thanks
Reddy

Hi
Stock Transport Order Without SD Delivery.
U dont have to maintian sales view for the materials.
1. Extend the material to those 2 plants.
2. Create UB purch document.
3. Goods issue wrt to the STO in the supplying plant ( 351 mvt type).
4. Good Receipt in the receiving plant ( 101 mvt type ).
5. Invoice verified (MIRO).
U should have specific pricing procedure for STO. In MEK0 u have to choose the appropriate pricing procedure with the accrual key linked for freight charges.
Vishal...

Order Confirmation screen setting?

Dear SAPIENTS,
Where is the setting for order confirmation screen setting at the level of each user?
Regards,
Kaushal Rai

If you are talking about the transaction IW42 and how to set each user's settings you would use menu path Extras -> Settings, choose the appropriate Confirmation profile, and Save. Each user will have to perform this action in IW42 to set the default screen layout. The confirmation profiles are set up under Set Screen Templates for Completion Confirmation in the IMG path Plant Maintenance and Customer Service -> Maintenance and Service Processing -> Completion Confirmations -> Set Screen Templates for Completion Confirmation.
Not sure if this answers the specific question, but I hope it helps.
Regards

Ordering items not set up in RMS

Hi,
I have encountered a problem with my client which I was wondering if anyone here could help me with.
I am working with a grocery client where the individual stores often buy items (fresh fish, fruits and so on...) directly from local suppliers instead of going through the suppliers that are set up in the system. The store manager often have a deal set up with the local fish market, suppling him with whatever the catch of the day is. This means, in turn, the the specfic supplier differs from day to day (since it could be fisherman #1 one day, and fisherman #2 the next). The product will also differ alot since different fish go for different price depending.
How am i to set this up in RMS? I am thinking of setting up a token supplier called "Fish_dealer" with one item "Random_Fish"? This is just my first ideas, and I would love input on this problem so i can stear my thought in any sort of direction :P.
Thanks!

hi ,
are they paying back like cash on receipt or kind of prepaid ?
either consignment or concession or supplier wise it all involves either a flat rate or margin as share in the sales ..in all kinds all retailers will like to work on minimum payment terms to work on -ve workign capital. i am sure you defenitely aware it .
just think whether this approach is feasible or not ...
create a dummy supplier or some one like external finisher option available in RMS for common payment execution with payment terms which can be done in system.
now from whom ever you buy the fish all the payments will go to common supplier / external finisher who pays in return to suppliers. so with this context the store manager can place the order directly to suppliers either by raising a store order or also its possible to receive it via DSD if everything happens over live market factors like availablity and etc ...
regards,
deepak
Edited by: Deepakkumar.g on Feb 17, 2012 6:24 PM

Outlook 2003 set up with non BT url

Hi All,
New to the forum so sorry if this is not the right place!
I moved to BT Infinity on Friday. Very pleased so far except for one problem. I cannot send emails.
I have my own URL for email and use Outllok 2003 to send and receive mails. Received emails OK. Fails to send. I was with plus net where I put"relay.plus.net" for Outgoing mail server (SMTP). For BT I have substituted mail.btinternet.com.
I have tried help and this forum to find out how to set up the account so far without success. Used a telephone number that came up on one of the help pages. Said that it would take me through to the UK help team. Called the number and got a message saying that this number was no longer valid and dial 0800 1114567. This took me through to an India help line who could not help.
Some basic questions. Do I need a BT email address to set this up? I have seen that I would have been set up with one when I join, but I am not aware.
I have tried to set up a authentication using my user ID. The problem there is that I have two @ "xxx@[email protected]". So tried changing my user ID, but was told this must be my email address.
So help would be very welcomed!
Solved!
Go to Solution.

At some stage in the order process, you should have received an email like this:
This contained a new email address associated with your account, though it would still have been addressed to the email address that you had given at the time you ordered.
To send emails, you need to log in to the BT mail server with these details. It is quite common when leaving an ISP that they will continue to allow you to receive mails to your old address, but not send them. For sending from that address, you need to get it set up to send via the BT server. So for example, one of my Outlook accounts logs in to O2 to check for incoming mail, but logs in to BT to send from that address.
(You'll get into an address verification process to do this, but it's pretty straightforward.)

CO78 -- orders to be set DLFL with plant specified in variants

Similar Messages

Maybe you are looking for