CO88 settlement in background with spool error .

Dear SAP Experts ,
After settlement of Process orders through CO88 in background during our month end closure, in SPOOL request system result is showing message u201CProcessing completed with no errorsu201D
but in Processing cateogry ,the error are showing as 3 no's with out any error message.
How can i find the errors , or does it relates to technical errors. can any one help me to fix this .
Thanks
Partha

Hi,
In settlement, normally error messages are stored in the application log.
The variance calculation/CO88 creates multiple output lists (basic list, detail list, messages/error log). Other period end transactions too. However, SM37 only links one list to the job, usually the last one created. In order to view all created lists either use transaction SP01 or transaction SCMO. You will find the error log there.
An alternative for further analysis is as follows:
Instead of transaction CO88, use report RKO7CO88. Split the job in several smaller jobs. This can be done with the extended selection options for RKO7CO88, you can enter a range of orders here. Set also the processing option 'Check transaction data'.
If the smaller jobs run without cancellation, analyze the error messages and the result of the jobs
regards
Waman

Similar Messages

Spool error for background job

Hi All,
I have scheduled one job in sap for a report.I have made a distribution list via tcode SO01.
I have given this distribution list to the SPOOL RECEPIENT section in SM 36.
The job is running successfully but is giving the following error and not sending emails to the distribution list.
The error is :-
"Spool list of step 1 could not be sent due to error 7".
Does anybody has any idea about this error?
Please help its a production issue.
Thanks in advance
Vivekanand Meghmala

Look at SAP note : 760838
Symptom
Background job spool lists are not sent.
Other terms
RSBTCRTE, RSPO_SPOOLJOB_TO_OFFICE, SO_DOCUMENT_SEND_API1
Reason and Prerequisites
1. The jobs in question have recipient references in table TBTCO but these have no equivalent in the Business Object Repository.
2. An error occurs when sending in the spool or in the Sapconnect layer.
Solution
This note does not provide a direct solution to the problem but it does provide a source code enhancement that you can use to create more trace information about the cause of the error. When you copy and execute a job with spool list recipients, trace messages are output when errors occur.
After implementing the correction instructions, use transaction SE91 to create the following message:
Message class: BT
Number: 347
Text: Spool list of step &1 could not be sent due to error &2.
In detail, the error numbers mean:
1 = Spool request does not exist (or no longer exists)
2 = Spool request does not contain any data
3 = Empty page area selected
4 = No authorization to send the request
5 = Access to the spool request is not possible
6 = Read error in the Temse layer
7 = Spool request could not be sent (sending problem)
8 = Incorrect request type
9 = Other

Repeats for work items with temporary errors for background WI

Hi!
I have a task that generates a temporary error method in order to activate the Repeats for work items with temporary errors. It currently has 5 repeats at intervals of 2 min. After running above the WI-status is 'Error'. When Restart by SWPR runs only once and sends the message 'Work item set to error following 05 failed attempts'.
Please can tell me any way that when run again relaunch fixed repetitions.
I welcome your comments.
Thanks.
Regards,
Raisme Wilhelm

Hi Raisme,
Please show me since it is the design of the workflow. It is probable that you are inside a repetitive sequence that send several work items.
Best Regards
Victor Enzo
Edited by: Victor Enzo Montenegro on Feb 23, 2011 3:34 PM

Uploading phrases with LSMW ERROR..

I created a LSMW to upload all the phrases, when I excute the batch input file in foreground, it goes through, but if I excute it in background, I got error: RAISE_ERROR was called!
Look at System -> Own spool requests and search
for C14Z_ERROR_RAISE. (An output-device
(= printer) must be given in the defaults
of your user-profile.)
Runtime error OBJECTS_OBJREF_NOT_ASSIGNED has occurred
Transaction error
Any idea what I should do?
Thanks

Hello
I have never tried to use LSMW to do a phrase import because there are many EHS checks which need to be passed before you can import phrases successfulll and because of the fact that the EHS functions are really sufficient to do an import.
Furthermore I have never used LSMW before because EHS does have numerous import/export functions which are recommended in import/export.
In any case: most of EHS activities (import/export) require the "existance" of a spool printer. May be you have not defined a default printer in your user profile an LSMW is requiring that too. Normally EH&S is providing a "log" file in the SAP spool so that you can control the result.
So check your user profile if there is a SAP printer assigned.
With best regards
C.B.
PS: some rare article exsist in SDN Forums regarding the use of LSMW in EH&S. I found this one: Using BAPI In LSMW : (EH&S Module )
and this one:
Upload new phrases in the system
Edited by: Christoph Bergemann on Jan 30, 2011 7:19 PM
Edited by: Christoph Bergemann on Jan 30, 2011 7:22 PM
Edited by: Christoph Bergemann on Apr 9, 2011 9:25 AM

Job Cancelled with an error "Data does not match the job def: Job terminat"

Dear Friends,
The following job is with respect to an inbound interface that transfers data into SAP.
The file mist.txt is picked from the /FI/in directory of the application server and is moved to the /FI/work directory of application server for processing. Once the program ends up without any error, the file is moved to /FI/archive directory.
The below are the steps listed in job log, no spool is generated for this job and it ended up with an error "Data does not match the job definition; job terminated".Please see below for more info.
1.Job   Started
2.Step 001 started (program Y_SAP_FI_POST, variant MIST, user ID K364646)
3.File mist.txt copied from /data/sap/ARD/interface/FI/in/ to /data/sap/ARD/interface/FI/work/.
4.File mist.txt deleted from /data/sap/ARD/interface/FI/in/.
5.File mist.txt read from /data/sap/ARD/interface/FI/work/.
6.PD-DKLY-Y_SAP_FI_POST: This job was started periodically or directly from SM36/SM37 (Message Class: BD, Message Number : 076)
7.Job PD-DKLY-Y_SAP_FI_POST: Data does not match the job definition; job terminated (Message Class : BD, Message No. 078)
8.Job cancelled after system exception
ERROR_MESSAGE
Could you please analyse and come up about under what circumstance the above error is reported.
As well I heard that because of the customization issues in T.Code BMV0, the above error has raised.
Also please note that we can define as well schedule jobs from the above transaction and the corresponding data is stored in the table TBICU
My Trials
1. Tested uplaoding an empty file
2. Tested uploading with wrong data
3. Tested uploading with improper data that has false file structue
But failed to simulate the above scenario.
Clarification Required
Assume that I have defined a job using BMV0. Is that mandatory to use the same job in SM37/SM36 for scheduling?
Is the above question valid?
Edited by: dharmendra gali on Jan 28, 2008 6:06 AM

Dear Friends,
_Urgent : Please work on this ASAP _
The following job is with respect to an inbound interface that transfers data into SAP.
The file mist.txt is picked from the /FI/in directory of the application server and is moved to the /FI/work directory of application server for processing. Once the program ends up without any error, the file is moved to /FI/archive directory.
The below are the steps listed in job log, no spool is generated for this job and it ended up with an error "Data does not match the job definition; job terminated".Please see below for more info.
1.Job Started
2.Step 001 started (program Y_SAP_FI_POST, variant MIST, user ID K364646)
3.File mist.txt copied from /data/sap/ARD/interface/FI/in/ to /data/sap/ARD/interface/FI/work/.
4.File mist.txt deleted from /data/sap/ARD/interface/FI/in/.
5.File mist.txt read from /data/sap/ARD/interface/FI/work/.
6.PD-DKLY-Y_SAP_FI_POST: This job was started periodically or directly from SM36/SM37 (Message Class: BD, Message Number : 076)
7.Job PD-DKLY-Y_SAP_FI_POST: Data does not match the job definition; job terminated (Message Class : BD, Message No. 078)
8.Job cancelled after system exception
ERROR_MESSAGE
Could you please analyse and come up about under what circumstance the above error is reported.
As well I heard that because of the customization issues in T.Code BMV0, the above error has raised.
Also please note that we can define as well schedule jobs from the above transaction and the corresponding data is stored in the table TBICU
My Trials
1. Tested uplaoding an empty file
2. Tested uploading with wrong data
3. Tested uploading with improper data that has false file structue
But failed to simulate the above scenario.
Clarification Required
Assume that I have defined a job using BMV0. Is that mandatory to use the same job in SM37/SM36 for scheduling?
Is the above question valid?

Background job abend error

Hi all,
my background job abends with following errors.
     1. Error when assigning SID: Action VAL_SID_CONVERT table Z......
     2. Activation of M records from DataStore object Z...... terminated
     3. Process 000002 returned with errors.
Can anyone help me out regarding this.
Thanks.

there seems to be a problem with the SID table of your master data. test it with RSRV and repair any errors.
if this doesn't help return to the forum

Spool Error capture question

Hi,
I am trying to spool data from tables into flat files. I am using the following scripts to accomplish it
1. A cmd file (windows) that makes a call to a sql file
2. The SQL file which generates another query file at the run time, depending upon the table name passed to it
3. The run time query file , that executes the final query and spools the data into a txt file | delimited
For eg:
Actual command passed C:\Spool_utility\spool_utility TABLE_NAME
Eg of the spool utility file :
@echo off
SET dbuser=XX@YY
SET dbpw=xxxx
echo %date% - %time% - Start > %1%log.txt
echo START
sqlplus -s %dbuser%/%dbpw% @spool_utility.sql %1>%1.txt
echo %date% - %time% - Done >> %1%log.txt
echo DONE
Eg of the spool_utility.sql
set echo off
SET newpage 0
SET feedback off
SET linesize 32767
set pagesize 0
SET wrap off
SET recsep off
SET con off
SET trim on
SET trims on
set verify off
SET doc off
SET termout off
SET arraysize 5000
SET HEADING off
set colsep "|"
spool &1.sql;
Prompt Select * from &1 where some condition
spool off
set termout ON
@ &1
EXIT
The above file generates a table_name.sql file with the actual table name at run time and gets executed and the output is written to the table_name.txt file.
This works perfectly fine. But the issue is when someone passes some wrong table name or if there is a actual run time error while executing the query , the error with details itself itself gets written to the end spool file.
For eg : if i do this just to generate an error and execute it from command line, the query generates an error and writes the error to the spool file , but at the command prompt where I executed the command I do not see any error and the process seems to have run perfectly well
set xxx on xxx off as above
spool &1.sql;
Prompt Select * from &1 where rownum><10---this will cause the issue
spool off
set termout ON
@ &1
EXIT
Eg of spool file generated :
from table_name WHERE rownum><=10 *
ERROR at line 62:
ORA-00936: missing expression
My question is, is there any way i can capture this runtime error and return this error to my calling sql script spool_utility.sql and then propagate it to the calling command file and do some tasks for eg removing the spool file and writing the actual error to a log file . Basically any way to know at my OS calling level that the entire spooling operation was unsuccessful.
Thanks

Thanks for the reply.
Querying the data dictionary will work only when the issue is a invalid table name. My question is can i capture any run time error, not only incorrect table name.
If there is any run time error (for eg the one I showed where I used a >< sign which is a invalid operator) the error gets written to my spool file, but there is no way I am able to capture that in my calling sql script and subsequently in the calling command file so that I can do something with the error. For eg if a spool file may get written with error messages, some batch process or user may pick up the spool file and start processing which i dont want to happen. i would like to trap that error or at least be notified of the error at my outer calling sql file or outer command file level, so that I can write the error to a log file and delete the erroneous spool file etc.

Error while printing (SAP spool error)

Hi,
I have configured a printer of type 'C : Direct Operating System Call'. On printing a page, an error occurs with the following log entries
SAP spool error log
=====================
Print request processing log
The host spool is reporting errors
Windows/NT error 1775: "A null context handle was passed from the client to the host during a remote procedure call."
Errors occurred processing this print request
Error during print request output. l_rc = 1
There may be no printout
Please. can someone help me out here.
Thanks!
Regards,
Angad

Ok I am upgrading from R/3 46C to ECC 6.0, on the 46c system the printers are configured as follow:
Device type          HPLJ4    : HP Laserjet 4 series
Spool server          sapprod1_PRD_00       sapprod1
Device class          Standard printer
Host spool access method C: Direct operating system call
Host printer
srtroot03.startek.com\srt-dc-c4-sharp
Host name          sapprod1
On the ECC 6.0 system the printers are configured as follows:
Device Type          HPLJ4    : HP Laserjet 4 series
Spool Server          srtsapeccdev1_DEV_00
Server Description
Host               srtsapeccdev1
Device Class          Standard printer
Host Spool Access Method C: Direct operating system call
Host printer
srtroot03.startek.co\srt-dc-c4-sharp
HostName          srtsapeccdev1
The 46c system prints just fine, on the ECC 6.0 systems; I can not get the printers to work. I have made sure that the hosts file on the ECC server has the printer host address, and I get the following error back:
SAP spool error log
=====================
Print request processing log
The host spool is reporting errors
Windows/NT error 5 [
srtroot03.startek.com\srt-dc-c4-sharp]: "Access is denied."
Errors occurred processing this print request
Error during print request output. l_rc = 1
There may be no printout
The access to the Printer Host is wide open, what do I need to do to resolve this issue.

Large XML Publisher reports fail with client-error-request-value-too-long

We are running BI Publisher 5.6.3 with Oracle Applications 11.5.10.2 (ATG.H RUP 5), and are having frequent failures with client-error-request-value-too-long messages on large PDF reports that cause the entire report to not print.
The exact error message is as follows:
lp: unable to print file: client-error-request-value-too-long
Pasta: Error: Print failed. Command=lp -c -dPDX_B6_1LJ5200NEAST /logs/temp/pasta3262_0.tmp
Pasta: Error: Check printCommand/ntPrintCommand in pasta.cfg
Pasta: Error: Preprocess or Print command failed!!!
APP-FND-00500: AFPPRN received a return code of failure from routine FDUPRN. Program exited with status 1
Cause: AFPPRN received a return code of failure from the OSD routine FDUPRN. Program exited with status 1.
Action: Review your concurrent request log file for more detailed information.
I have Google'd client-error-request-value-too-long, and found it is a common CUPS issue on Linux. The popular solutions (having /var/spool/cups and /var/spool/cups/tmp) are already in place. Also, the temp files are nowhere near 2 GB (44MB).
Has anyone had this issue with BI Publisher on Linux?

Thanks for the link. It looks like the sysadmins have throttled cups to low to allow large bitmapped print jobs:
grep MaxRequestSize cupsd.conf
# MaxRequestSize: controls the maximum size of HTTP requests and print files.
MaxRequestSize 10M
I am trying to get a more reasonable size limit.

Large BI Publisher reports fail with client-error-request-value-too-long

We are running BI Publisher 5.6.3 with Oracle Applications 11.5.10.2, and are having frequent failures with client-error-request-value-too-long messages on large PDF reports that cause the entire report to not print.
The exact error message is as follows:
lp: unable to print file: client-error-request-value-too-long
Pasta: Error: Print failed. Command=lp -c -dPDX_B6_1LJ5200NEAST /logs/temp/pasta3262_0.tmp
Pasta: Error: Check printCommand/ntPrintCommand in pasta.cfg
Pasta: Error: Preprocess or Print command failed!!!
APP-FND-00500: AFPPRN received a return code of failure from routine FDUPRN. Program exited with status 1
Cause: AFPPRN received a return code of failure from the OSD routine FDUPRN. Program exited with status 1.
Action: Review your concurrent request log file for more detailed information.
I have Google'd client-error-request-value-too-long, and found it is a common CUPS issue on Linux. The popular solutions (having /var/spool/cups and /var/spool/cups/tmp) are already in place. Also, the temp files are nowhere near 2 GB (44MB).
Has anyone had this issue with BI Publisher on Linux?

The linux sysadmins set the cups max_request_size at 10 MB, which was causing this error. Once the restriction was lifted, the reports ran without error.

Spool Error - Errors occurred processing this print request

Hi,
      I have a problem printing documents through spool.
1. I run a form from Form Builder, execute and select to print from spool
2. In SP02, I select the spool request created and Select Direct Printing.
Spool request Status is changed to error and following is the error log.
I get this for all print requests from spool. When I print these documents directly, I have no problem. I understand there is some problem with the spool server but do not know what it is.
I also observed that when the spool access method is G - I have no problems in printing.
Printer: HP HP laserJet PS (2430)
Host Spool Access Method: L: Print Locally Using LP/LPR.
Device Class: Standard Printer.
SAP NW 2004s SP14
      SAP spool error log
      =====================
Print request processing log
The host spool is reporting errors
Message from host spool:
D:\usr\sap\BS9\DVEBMGS00\data\000001615100001.BS9 is currently being printed
End of message
Command used: print /d:
bs107.platinumdb.com\HP01 D:\usr\sap\BS9\DVEBMGS00\data\000001615100001.BS9
Errors occurred processing this print request
Error during print request output. l_rc = 1
There may be no printout
Most important attributes of spool request
Request number 16151
Request name PBFORM HP01 SMULLAPUDI
Client 800
Owner SMULLAPUDI
Request attributes
Time created   2008050118454600
Remaining life +00007235918
Dispo 1 (Go/Hold) H
Dispo 2 (Keep/Delete)     K
Dispo 3 (Indirect/Direct) D
Default output device HP01
Default no. copies 1
Format G_RAW
Main print request characteristics
Spool request number 16151
Print request number 1
Print request attributes
Time created   2008050118471500
Output device HP01
Format G_RAW
Character converter active when first problem occurred
No information available
I am working on this since 4 days with no solution. Kindly help.
Thank you,
Vasu
Edited by: subbu M on May 2, 2008 11:37 PM

Hi Sri,
Try to setup the printer at OS LEVEL.
then,
If on Windows---use method C.
if not,
use method U and map to your printer queue at OS level.
Hope this resloves this issue.
Reward Pts if useful
Regards,
Malti

What data is stored in the CC Background Job Spool File?

What information is stored in the location referenced in the CC Configuration/Miscellaneous setting of 'Background Job Spool File Location'? Our test and production versions of this system are configured the same, with both pointing to the same location on their respective servers. However the test location shows a virsa/bgJobSpool folder in it containing multiple files while our production system shows this location as empty.
Both versions seem to be working OK. We are running backgrounds jobs in each (risk analysis, management reviews, rule generation, etc.) and seeing results.
We updated to the GRC 5.2 a few months ago and are currently on SP9. This issue came up during a system audit, so we need to come up with an explanation for the differences.
Thanks.

I had reviewed that SAP note previously, but it does not seem to help any with our situation. We are running ad hoc background risk analysis jobs frequently and can always see the results. Everything seems to work fine from the application side, we just don't see the logs where we thought they should be over on the server.
From the outside, it looks like maybe it is ignoring the configuration setting and is still using the default location for the log. Does it need to be on the same drive as the application? I believe our application and the default location are both on our E drive, but we want to put the location for this and the Alert Log on the D drive.
Thanks.

Reports Background Engine caused error and had to be closed

"Reports Background Engine caused error and had to be closed"
we are encountering this error when trying to run any report on some machines.with windows 2000.
we tried to login (on the machines having problems) using another windows user,
sometimes it works and sometimes not.
we also tried to reinstall the reports runtime and it never worked.
we have developer 6i, Oracle database 10g express edition.
Does anyone have a solution to this random problem ?
Thanks

dear all
you can pass parameter from form to report to close report server after close report
add_parameter(pl_id, 'oracle_shutdown',text_parameter, 'Yes');
then it will be ok
good luck
Message was edited by:
nim
Message was edited by:
nim

SFTP MGET of large files fails - connection closed - problem with spool file

I have a new SFTP job to get files from an FTP Server. The files are large (80mg, 150mg). I can get smaller files from the ftp site with no issue, but when attempting the larger files the job completes abnormally after 2 min 1 sec. each time. I can see the file is created on our local file system with 0 bytes, then when the FTP job fails, the 0 byte file is deleted.
Is there a limit to how large an ftp file can be in Tidal? How long an ftp job can run?
The error in the job audit is Problem with spool file for job XXXX_SFTPGet and an exit code of 127 (whatever that is).
In the log, the error is that the connection was closed. I have checked with the ftp host and their logs show that we are disconnecting unexpectedly also.
Below is an excerpt from the log
DEBUG [SFTPMessage] 6 Feb 2015 14:17:33.055 : Send : Name=SSH_FXP_STAT,Type=17,RequestID=12
DEBUG [SSH2Channel] 6 Feb 2015 14:17:33.055 : Transmit 44 bytes
DEBUG [ChannelDataWindow] 6 Feb 2015 14:17:33.055 : Remote window size decreased to 130808
DEBUG [PlainSocket] 6 Feb 2015 14:17:33.071 : RepeatCallback received 84 bytes
DEBUG [SSH2Connection] 6 Feb 2015 14:17:33.071 : ProcessPacket pt=SSH_MSG_CHANNEL_DATA
DEBUG [SFTPMessageFactory] 6 Feb 2015 14:17:33.071 : Received message (type=105,len=37)
DEBUG [SFTPMessageStore] 6 Feb 2015 14:17:33.071 : AddMessage(12) - added to store
DEBUG [SFTPMessage] 6 Feb 2015 14:17:33.071 : Reply : Name=SSH_FXP_ATTRS,Type=105,RequestID=12
DEBUG [SFTPMessage] 6 Feb 2015 14:17:33.071 : Send : Name=SSH_FXP_OPEN,Type=3,RequestID=13
DEBUG [SSH2Channel] 6 Feb 2015 14:17:33.071 : Transmit 56 bytes
DEBUG [ChannelDataWindow] 6 Feb 2015 14:17:33.071 : Remote window size decreased to 130752
DEBUG [PlainSocket] 6 Feb 2015 14:17:33.087 : RepeatCallback received 52 bytes
DEBUG [SSH2Connection] 6 Feb 2015 14:17:33.087 : ProcessPacket pt=SSH_MSG_CHANNEL_DATA
DEBUG [SFTPMessageFactory] 6 Feb 2015 14:17:33.087 : Received message (type=102,len=10)
DEBUG [SFTPMessageStore] 6 Feb 2015 14:17:33.087 : AddMessage(13) - added to store
DEBUG [SFTPMessage] 6 Feb 2015 14:17:33.087 : Reply : Name=SSH_FXP_HANDLE,Type=102,RequestID=13
DEBUG [SFTPMessage] 6 Feb 2015 14:17:33.087 : Send : Name=SSH_FXP_READ,Type=5,RequestID=14
DEBUG [SSH2Channel] 6 Feb 2015 14:17:33.087 : Transmit 26 bytes
DEBUG [ChannelDataWindow] 6 Feb 2015 14:17:33.087 : Remote window size decreased to 130726
DEBUG [PlainSocket] 6 Feb 2015 14:17:33.118 : RepeatCallback received 0 bytes
DEBUG [SFTPChannelReceiver] 6 Feb 2015 14:17:33.118 : Connection closed: (code=0)
ERROR [SFTPMessageStore] 6 Feb 2015 14:17:33.118 : Disconnected unexpectedly ( [errorcode=0])
ERROR [SFTPMessageStore] 6 Feb 2015 14:17:33.118 : EnterpriseDT.Net.Ftp.Ssh.SFTPException: [errorcode=0]
ERROR [SFTPMessageStore] 6 Feb 2015 14:17:33.118 : at EnterpriseDT.Net.Ftp.Ssh.SFTPMessageStore.CheckState()
ERROR [SFTPMessageStore] 6 Feb 2015 14:17:33.118 : at EnterpriseDT.Net.Ftp.Ssh.SFTPMessageStore.GetMessage(Int32 requestId)

I believe there is a limitation on FTP and what you are seeing is a timeout built into the 3rd party application that tidal uses (I feel like it was hardcoded and it would be a big deal to change but this was before Cisco purchased tidal) there may have been a tagent.ini setting that tweaks that but I can't find any details.
We wound up purchasing our own FTP software (ipswitch MOVEit Central & DMZ) because we also had the need to host as well as Get/Put to other FTP sites. It now does all our FTP and internal file delivery activity (we use it's api and call from tidal if we need to trigger inside a workflow)

Acrobat Pro form getting MAPI spooler error

I have a form created in Acrobat Pro. The users are using Reader 9.3.1. When the user clicks the Submit button, they get a MAPI Spooler error. For some Windows Services closes Reader. Any thoughts on what is causing this and how to fix?
Thanks,
MDawn

Hi Lon ,
I would request you to get in touch with the support team to get your issue fixed.
http://helpx.adobe.com/x-productkb/global/service-b.html
Regards
Sukrit Dhingra

CO88 settlement in background with spool error .

Similar Messages

Maybe you are looking for