CoA issues between ISE and 3750x

We are having an issue using the cisco ise 1.1.2 and a 3750x (Version 12.2(58)SE2)
When the radius sends a reauthentication CoA message to the switch, the switch responds with a 'session contect not found' reply. I have upgraded the code to the latest levels on both the ise and switch and still have the same resultts.
This reauthenticate is needed after the NAC profiler determines the pc is complient. I am receiving the complient message from the pc and switch, but becuase the switch never reauthentices the client after the CoA request, the client is never granted full access.
I am not sure if the radius server is sending the wrong session id, or if the switch is looking at it wrong.
Please Help...!!!!!
-Debug --
Log Buffer (10000 bytes):
Feb 28 19:34:21.940 UTC: RADIUS: COA received from id 38 10.122.1.82:40171, CoA Request, len 140
Feb 28 19:34:21.940 UTC: COA: 10.122.1.82 request queued
Feb 28 19:34:21.940 UTC: RADIUS: authenticator 62 6B 15 C9 C7 A5 CA 88 - 4F B2 EE 4C A0 3D 9F 50
Feb 28 19:34:21.948 UTC: RADIUS: NAS-IP-Address      [4]   6   10.122.1.66
Feb 28 19:34:21.948 UTC: RADIUS: Event-Timestamp     [55] 6   1362080061
Feb 28 19:34:21.948 UTC: RADIUS: Message-Authenticato[80] 18
Feb 28 19:34:21.948 UTC: RADIUS:   BC B3 BA 2A 11 BD 63 0B 22 7E 82 AA C2 A5 F7 C4              [ *c"~]
Feb 28 19:34:21.948 UTC: RADIUS: Vendor, Cisco       [26] 41
Feb 28 19:34:21.948 UTC: RADIUS:   Cisco AVpair       [1]   35 "subscriber:command=reauthenticate"
Feb 28 19:34:21.948 UTC: RADIUS: Vendor, Cisco       [26] 49
Feb 28 19:34:21.948 UTC: RADIUS:   Cisco AVpair       [1]   43 "audit-session-id=0A7A014200000272048AF0F1"
Feb 28 19:34:21.948 UTC: COA: Message Authenticator decode passed
Feb 28 19:34:21.948 UTC: ++++++ CoA Attribute List ++++++
Feb 28 19:34:21.948 UTC: 07353140 0 00000001 nas-ip-address(585) 4 10.122.1.66
Feb 28 19:34:21.948 UTC: 0735375C 0 00000001 Event-Timestamp(430) 4 1362080061(512FB13D)
Feb 28 19:34:21.948 UTC: 0735376C 0 00000009 audit-session-id(794) 24 0A7A014200000272048AF0F1
Feb 28 19:34:21.948 UTC: 0735377C 0 00000009 ssg-command-code(475) 1 32
Feb 28 19:34:21.948 UTC:
Feb 28 19:34:21.957 UTC: AUTH-EVENT: auth_mgr_ch_search_record - Search record in IDC db failed
Feb 28 19:34:21.957 UTC: RADIUS/ENCODE(00000000):Orig. component type = Invalid
Feb 28 19:34:21.957 UTC: RADIUS(00000000): sending
Feb 28 19:34:21.957 UTC: RADIUS(00000000): Send CoA Nack Response to 10.122.1.82:40171 id 38, len 62
Feb 28 19:34:21.957 UTC: RADIUS: authenticator DF 18 2F 59 21 4F 84 E1 - 61 B8 43 B8 01 C5 58 B4
Feb 28 19:34:21.957 UTC: RADIUS: Reply-Message       [18] 18
Feb 28 19:34:21.957 UTC: RADIUS:   4E 6F 20 76 61 6C 69 64 20 53 65 73 73 69 6F 6E [ No valid Session]
Feb 28 19:34:21.957 UTC: RADIUS: Dynamic-Author-Error[101] 6   Session Context Not Found [503]
Feb 28 19:34:21.957 UTC: RADIUS: Message-Authenticato[80] 18
Feb 28 19:34:21.957 UTC: RADIUS:   30 C9 AE 52 80 2E A2 54 FF F3 4B C7 28 31 A9 61          [ 0R.TK(1a]
ESWHQFL02-S#
ESWHQFL02-S#
-- Switch Config -
aaa authentication login default group tacacs+ local-case
aaa authentication login local_login local
aaa authentication enable default group tacacs+ enable
aaa authentication dot1x default group radius
aaa authorization exec default group tacacs+ local
aaa authorization commands 5 default group tacacs+ local
aaa authorization commands 15 default group tacacs+ local
aaa authorization network default group radius
aaa authorization network auth-list group DOT1X
aaa accounting dot1x default start-stop group radius
aaa accounting exec default start-stop group tacacs+
aaa accounting commands 5 default start-stop group tacacs+
aaa accounting commands 15 default start-stop group tacacs+
aaa accounting network default start-stop group tacacs+
aaa server radius dynamic-author
client 10.122.1.82 server-key 7 14141B180F0B
client 10.122.1.80 server-key 7 045802150C2E
aaa session-id common
radius-server attribute 6 on-for-login-auth
radius-server attribute 6 support-multiple
radius-server attribute 8 include-in-access-req
radius-server host 10.122.1.82 auth-port 1812 acct-port 1813 key 7 13061E010803
radius-server host 10.122.1.80 auth-port 1812 acct-port 1813 key 7 104D000A0618
radius-server deadtime 5
radius-server key 7 030752180500
radius-server vsa send accounting
radius-server vsa send authentication

As per the cisco recommendation IOSv12.2(52)SE is suitable for Catalyst 3750-X which will support all the features without any issues like MAB,802.1X,CWA,LWA,COA,VLAN,DACL,SAG as mentioned in the link below:
http://www.cisco.com/en/US/docs/security/ise/1.1.1/compatibility/ise_sdt.html.
I see you are using IOSv12.2(58)SE2,which is not recommended.So you can downgrade to IOSv12.2(52)SE which will solve your issues.

Similar Messages

Why can't I use WebCT chat with my computer? I get the 'spiral of death' every time I try to type in my chat. I have a feeling it has to do with compatibility issues between Java and Tiger.

Why can't I use WebCT chat with my computer? I get the 'spiral of death' every time I try to type in my chat. I have a feeling it has to do with compatibility issues between Java and Tiger.

Hi Elizabeth,
Do your Mac meet any of these requirements?
http://www.wvnet.edu/services/webct/requirements.html
From this it appears to be PC only!???
http://sourceforge.net/projects/awebctcclient/files/Pancake%20%28it%20own%20proj ect%20now%29/Pancake%20Console%20V1.0.0/PancakeConsole-1.0.0-src.zip/download
Can you provide any more info on which bersion or file you have?
Can you tell us why you need this for your use?

Compatibility issues between R12 and report builder 2.5

Hi,
I just want to know if there are issues between R12 and (Forms 4.5 and Reports 2.5)? I have been using 6i since I started in the oracle so I'm a little new to this.
Thanks
peopsquik

As my understanding there is no issue for Forms 4.5 and Reports 2.5 with R12.
You can develop report with Report 6i can be deployed with R12.You cannot use Forms 4.5, Reports 2.5 or Developer (Forms/Reports) 6i with Oracle EBs R12 as it is not certified. The only supported version is Developer 10g
Using the OracleAS 10.1.2 Forms and Reports Builders with Oracle Applications Release 12 [ID 444248.1]
Thanks,
Hussein

Sync issues between Mac and Mobile Me

Hi all,
I'm having issues syncing between MobileMe and my Macbook Pro. It used to work perfectly, but I haven't been able to get it to sync since early August. All the changes I make between my iPhone and MobileMe work fine, but they just wont update with any changes I make on my Macbook. Equally, changes made on iPhone or MobileMe don't show on my laptop anymore.
I've tried force syncs and resetting sync data (and transferring info from MobileMe) but none work. Is there anything else I can try?
Thanks,

You should ask in the MobileMe forums as this forum (iSync) has nothing to do with syncing Macs to MobileMe.

Curious... Syncing Issues Between iPhone and iTunes?

Just curious... the past several months I have noted various concerns around "syncing" between iPhone and iTunes... yet don't recall any mention of whether it occurs between MAC OS or WIN hardware (desktops and or laptops). Furthermore, I am interested if anyone can comment whether these sync issues occurs mostly on TIGER or LEOPARD OS when accessing iTUNES. (Guess I should pay more attention to the noted OS field.
I ask because I am considering an upgrade to LEOPARD by end of month and don't want to jeopardize my syncing to my iPhone if it is a LEOPARD related issue. Thank you

I'm running Leopard and I've never experienced any sync issues.
These discussions include mostly problems, which is what these discussions are for - a user to user support forum for technical support issues and questions.
Which particular issue are you referring to?
Before installing a major OS X upgrade such as Leopard over a previous OS X version, it is a good idea to create or update your existing backup of important data stored on your computer's hard drive - including your iTunes library, photos, contact info, calendar events, documents, etc. I've never experienced any problems installing a major OS X upgrade over a previous OS X version, but I always update my computer's backup immediately beforehand to be on the safe side.

White space issues between content and footer.

I am having white space/page length issue between the end of my content and the footer.
I have read the forums and tried changing the page length minium height to 800 and then I
unchecked the sticky footer in page properties on both the master page and the content page itself.
Here's a link to one of my pages. http://www.ueonline.com/rohs-info.html
This page has very little content and you can see the white space.
Any help is appreciated.

This may be a little dated for a reply, and I'm not 100% sure your issue is the same as mine, but I discovered that unchecking the sticky footer option in site properties solved the problem. I should note that the website I was building for a client was über simple, and while disabling that function solved the headache in my own project, it may incur unwanted results in others, depending on the complexity.
DTA

Alignment Issues between dreamweaver and browser

Hi
Hoping someone can help, i'm trying to learn how to make
better sites with advanced tools like apDIV's but seem to be
running into an alignment issue. When I make the html file in
dreamweaver I seem to have to off set the images and div tags
inorder for the site to show up aligned properly in firefox,
explorer, etc. I'm thinking there might be a problem in the actual
code causing this but am not good enough yet to find it or the
problem, any ideas or guidence would be greatly accepted. below if
the links work is the difference I see between dreamweaver and when
its launched in a browser.
DreamweaverScreen
BrowserScreen

> over a centered frame
You are not using frames - that's a table.
Yes - there's a way to do this, but it will involve your
working in code.
Make your page left aligned by removing any centering.
Then position your layer so that it is properly located over
the table.
Change this -
</head>
to this -
<style type="text/css">
#wrapper { width:760px; margin:0 auto;position:relative; }
/* 760px will display on an 800px screen maximized browser
window without */
/* horizontal scrollbars. */
</style>
</head>
(you may need to adjust this width so that it's consistent
with the width of
your centering table)
change this -
<body ...>
(the ellipsis represents any other attributes that might be
mentioned in the
body tag, and SHOULD NOT BE INCLUDED EXPLICITLY!)
to this -
<body ...>
<div id="wrapper">
and this -
</body>
to this -

</div>
</body>
and see if that helps.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Vinx21" <[email protected]> wrote in
message
news:ge9t3e$92s$[email protected]..
> thanks for the help osgood, I see now what my problem is
and am just
> wondered
> if there was a way to place the absolute layer over top,
in the right
> position,
or will have i have to remake one of the elements a
> different way???
>
> thanks again, dave
>

A big issue between LR2 and PSE6?

Hello;
Im experiencing a strange situation between PSE6 and LR2. What about to tell you it happens to me twice, so I was able to recreate and document the issue. Before I go on I want to warn you that the only way to fix it was uninstalling and installing PSE6. The repair process did not work.
Before I describe and specify the Test Script I want to describe my system:
Vista Home Premium SP1, PSE6 and the 30 day trial of LR2.
Processor: Dual 2.89 MHz, 4GB of RAM, 512MB ATI Graphic Card
2 Internal HD; 250 GB and 650 GB
1 External HD 500GB.
Description: After I edited a RAW picture in PSE and saved as PSD I closed PSE6 and went to LR2 to continue editing, then after some editing in LR2 I decide to do more editing in PSE6 from LR2. I closed PSE6 and get back to LR2. I opened PSE6 from the Desktop and went to the Organizer-Edit-Preferences and BOOM; I get the message Adobe Photoshop Elements 6.0 (Organizer) has stopped working CLOSE THE PROGRAM.
Test Script:
WARNING: If you decide to go on and test this I want to warn you that both times I had to uninstall and install PSE6.
1. Edit a RAW picture in PSE6 and saved as PSD, exit PSE6.
2. Edit the same PSD picture in LR2, do anything you want.
3. Edit the PSD picture in PSE6 directly from LR2: Develop->Photo->Edit in PSE6.
4. Chose the Default Option: Edit a Copy with Lightroom Adjustments
5. When in PSE6 do anything or nothing to the picture and CLOSE exit from PSE6.
6. Start PSE6 and from the Organizer go to EDIT->Preferences and chose General
7. Now, if the problem its repeatable and its not only me you should get the message that the Organizer has Stopped working and you must have to close the program.
Organizer has Stopped working and you must have to close the program.
8. Since everytime that I tried to get into the Preferences PSE6 Crash I had to unistalled and installed again, I try to do the repair but in my case did not work.
Note: I don't know if the same it's going to happen with JPG's or TIFF's, at least I don't want to test it.
If somebody has any comments or knowledge about this please let me know. For now my Trial of LR2 has come to a stop.
Thanks in advance.

Hello Antonio;
After many, many test I discovered that the problem, at least in my case it is caused by the new ACR 4.5. Please read the Thread that I post under Camera Raw. I include the link below.
I also open two Bug Reports about this, but as usual Adobe (and other Software Companies) will never take responsability for this, until one day they release a new version with "enhancements".
PSE6 Organizer Crash with ACR 4.5 (Vista Only?)
http://www.adobeforums.com/webx/.3bb6a869.59b60d3e

Data type conversion issues between Oracle and SQL Server

Hi there, I am using Heterogeneous Services to insert into a SQL Server database. I am running into an issue between data types regarding Oracle's VARCHAR2 and trying to insert that into a SQL Server MONEY data type. I tried using the TO_NUMBER() function to convert my VARCHAR2 to a number, but that didn't seem to help.
Does anyone have any advice on how to work around this??
Thanks for any help,
ivalum21

ORA-02047: cannot join the distributed transaction in progress
ORA-06512: at "MY_PACKAGE_NAME", line 263
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Generic Connectivity Using ODBC]DRV_Execute: DB_ODBC_ENGINE (1645): ;
[Microsoft][ODBC SQL Server Driver][SQL Server]Disallowed implicit conversion
from data type varchar to data type money, table 'tableA',
column 'total_amount'. Use the CONVERT function to run this query. (SQL
State: 37000; SQL Code: 260)
ORA-02063: preceding 2 lines from SQLSERVER_LINK
ORA-06512: at "RCDTPUMP.CAMPUSCALL_DATAPUMP_UNI", line 875
ORA-06512: at "RCDTPUMP.CAMPUSCALL_DATAPUMP_UNI", line 791
ORA-06512: at "RCDTPUMP.CAMPUSCALL_DATAPUMP_UNI", line 1156
ORA-06512: at line 1
That is what I get when I take out the TO_NUMBER()
Message was edited by:
ivalum21

TE tunnel issues between IOS and IOS-XR

Hi Guys
I have a situation. The scenario (see the attached diagram) has to PE01 (IOS) connecting via a port-channel to P01 (IOS-XR), turn P01 connect to PE02 (IOS-XR). So we've configured a pseudowire between PE01 and PE02, this works fine! then we've configured a TE tunnel between PE01 and PE02, but when we chose the TE tunnel as preferred path for the PW, happens the following:
PC-A mac address appears on PE02 mac address table, however PC-B mac address doesn't appears on PE01 mac address table, so there is not connectivity between PC's at all.
It seems like the TE tunnel is causing some issue (thought TE tunnel status is okay at all), and the problem seems to be between PE01 and P01, when we take the TE tunnel from the PW preferred path, everything works fine! I'm not sure if this problem is caused by the port-channel too.
I've been looking for some software bugs in IOS 12.2(33)SRE6 and IOS-XR 4.3.1 but there is not such.
Anyone of you had this problem as well?
Marcelo

Hello.
Did you try ping inside vc between PE devices?
Could you provide relevant configuration from PE1,P,PE2 routers?
And the output you got during troubleshooting?

Is there an issue between EXSP24mkII and MOTU Symphonic Instrument?

I'm using Logic Express 7.2 for three large projects right now. Admittedly I'm pretty new to LE 7.2, since just recently switching over from Digital Performer.
So, far, LE has been very stable -- UNTIL last week when I loaded in MOTU's Symphonic Instrument. Now, if I have just one or two tracks of Symphonic instrument and nothing else, I'm fine, but if I start adding tracks that have different virtual instruments on them -- say, 2 tracks of Symphonic Instrument and 2 tracks of EXSP24 mkII, then I get frequent crashes.
The crashes occur as I record my first take on the first new track.
I can't seem to nail down a particular sequence of events yet, although I think I might be getting pretty close to figuring it out.
However, before I put in all the effort to figure out the bug, do you know if it's already been discovered? Are there known issues between Symphonic Instrument and Logic or MacIntels, or something?
Thanks!

I do have the latest version -- the one that's compatible with the MacIntels. And, when it's the only plug-in, it works great.
Well, maybe not quite as great as EXSP24mkII, but pretty good. There are still some wierd clicks that happen during playback occasionally, but, VERY fortunately, don't happen when I bounce the tracks down.
It doesn't seem like there's a known issue, so I'll see if I can isolate a series of actions that cause the problem. If I can nail it down, I'll let you all know.

DB Link issue between 8i and 11g

Hi, We have developed the shell script to connect oracle 11g database and do something and then update the oracle 8i database tables using the DB link. We have created the Public DB link in Oracle 11g database.
When we execute the script manually everything works fine. But while executing the same script using the LINUX - crontab the script failed to execute the DB link and throws the below error message
Error Message:
=========
ORA-12154: TNS:could not resolve the connect identifier specified Error loading the files
Anyone come accross this error before? please help
Thanks in advance

user4883361 wrote:
Hi sb92075:
How about Easysoft ODBC-Oracle Driver?
http://www.easysoft.com/products/data_access/odbc_oracle_driver/index.html
does this driver will permit me to create a DB link between 11g and 8i?
Thanks
Since it is not possible to prove a negative, you are left with the challenge to prove me wrong.
If you can make it work, then I was incorrect.
Please post your conclusion here, after you determine the answer to your question.

Difference between ISE and NAC?

Dear All,
Can you please help to understand difference ISE and NAC?
Thank You,
Abhisar.

Well ISE is the next generation of NAC and has extended the features some of the comparison of features are mentioned in the given diagram

10Gig (tengigabit) CRC Errors between N5K500 and 3750X

Dear Forum,
We have an issue with a 10 Gig connection between a Nexus 5548 and a 3750X 10Gig. There is also a HSRP group running over this link with aggressive timeouts which recently behaves somewhat unstable. We noticed a bunch of CRC errors on this link on the 3750X side (about 300 per hour) and assume that these are related to the HSRP troubles once or twice a day.
Originally the connection was made with a twinax cable. We already changed to MMF fiber with SR SFP+'s. The 10Gig Uplink Module in the 3750x has been replaced already. All to no avail. Now it's up to replace the 3750 (receives CRC) or the Nexus Chassis (sending device)
I was wondering if there is some experience on the list what is the most probably cause and solution here.
Thanks in advance,
Michael.

MTU is 1500 bytes, on both sides (I think) see output below. Strangely enough the NX has a non-zero Jumboframe counter (increasing).
C3750#sh int te3/1/1
TenGigabitEthernet3/1/1 is up, line protocol is up (connected)
Hardware is Ten Gigabit Ethernet, address is 4055.3992.111d (bia 4055.3992.111d)
Description: TO_100C_PO913
MTU 1500 bytes, BW 10000000 Kbit, DLY 10 usec,
     reliability 255/255, txload 2/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive not set
Full-duplex, 10Gb/s, link type is auto, media type is SFP-10GBase-SR
Media-type configured as connector
input flow-control is off, output flow-control is unsupported
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:55, output 00:00:41, output hang never
Last clearing of "show interface" counters 04:10:35
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 4011000 bits/sec, 1091 packets/sec
5 minute output rate 110431000 bits/sec, 16489 packets/sec
     37040147 packets input, 35868731879 bytes, 0 no buffer
     Received 1071851 broadcasts (935322 multicasts)
     0 runts, 0 giants, 0 throttles
     1002 input errors, 1002 CRC, 0 frame, 0 overrun, 0 ignored
     0 watchdog, 935322 multicast, 0 pause input
     0 input packets with dribble condition detected
     182446795 packets output, 69097435882 bytes, 0 underruns
     0 output errors, 0 collisions, 0 interface resets
     0 babbles, 0 late collision, 0 deferred
     0 lost carrier, 0 no carrier, 0 PAUSE output
     0 output buffer failures, 0 output buffers swapped out
C3750#sh int te4/1/1
TenGigabitEthernet4/1/1 is up, line protocol is up (connected)
Hardware is Ten Gigabit Ethernet, address is 4055.39bd.001d (bia 4055.39bd.001d)
Description: TO_100D_PO913
MTU 1500 bytes, BW 10000000 Kbit, DLY 10 usec,
     reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive not set
Full-duplex, 10Gb/s, link type is auto, media type is SFP-10GBase-SR
Media-type configured as connector
input flow-control is off, output flow-control is unsupported
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:14, output 00:00:33, output hang never
Last clearing of "show interface" counters 04:10:38
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 161000 bits/sec, 215 packets/sec
5 minute output rate 29493000 bits/sec, 9580 packets/sec
     3264201 packets input, 318586322 bytes, 0 no buffer
     Received 1130048 broadcasts (1020339 multicasts)
     0 runts, 0 giants, 0 throttles
     501 input errors, 501 CRC, 0 frame, 0 overrun, 0 ignored
     0 watchdog, 1020339 multicast, 0 pause input
     0 input packets with dribble condition detected
     168673910 packets output, 87266013753 bytes, 0 underruns
     0 output errors, 0 collisions, 0 interface resets
     0 babbles, 0 late collision, 0 deferred
     0 lost carrier, 0 no carrier, 0 PAUSE output
     0 output buffer failures, 0 output buffers swapped out
N5K connected to 3/1/1:
Ethernet1/1 is up
Hardware: 1000/10000 Ethernet, address: 0005.9b1f.8648 (bia 0005.9b1f.8648)
Description: CHANNEL_TO_RO015A
MTU 1500 bytes, BW 10000000 Kbit, DLY 10 usec
reliability 255/255, txload 1/255, rxload 3/255
Encapsulation ARPA
Port mode is trunk
full-duplex, 10 Gb/s, media type is 10G
Beacon is turned off
Input flow-control is off, output flow-control is off
Rate mode is dedicated
Switchport monitor is off
EtherType is 0x8100
Last link flapped 2d04h
Last clearing of "show interface" counters never
30 seconds input rate 96695496 bits/sec, 16464 packets/sec
30 seconds output rate 4715024 bits/sec, 1868 packets/sec
Load-Interval #2: 5 minute (300 seconds)
    input rate 148.33 Mbps, 20.23 Kpps; output rate 2.90 Mbps, 1.13 Kpps
RX
    26173471641 unicast packets 6446061938 multicast packets 24295222 broadcas
t packets
    32643828801 input packets 16853116460189 bytes
    7772805495 jumbo packets 0 storm suppression packets
    0 runts 0 giants 0 CRC 0 no buffer
    0 input error 0 short frame 0 overrun   0 underrun 0 ignored
    0 watchdog 0 bad etype drop 0 bad proto drop 0 if down drop
    0 input with dribble 0 input discard
    0 Rx pause
TX
    48369101239 unicast packets 462061134 multicast packets 81589744 broadcast
packets
    48912752123 output packets 56533126796163 bytes
    35421478216 jumbo packets
    6 output errors 0 collision 0 deferred 0 late collision
    0 lost carrier 0 no carrier 0 babble 0 output discard
    0 Tx pause
3 interface resets
N5K connected to 4/1/1:
Ethernet1/1 is up
Hardware: 1000/10000 Ethernet, address: 0005.9b1f.8188 (bia 0005.9b1f.8188)
Description: CHANNEL_TO_RO0015A
MTU 1500 bytes, BW 10000000 Kbit, DLY 10 usec
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA
Port mode is trunk
full-duplex, 10 Gb/s, media type is 10G
Beacon is turned off
Input flow-control is off, output flow-control is off
Rate mode is dedicated
Switchport monitor is off
EtherType is 0x8100
Last link flapped 2d04h
Last clearing of "show interface" counters never
30 seconds input rate 20643816 bits/sec, 10541 packets/sec
30 seconds output rate 142592 bits/sec, 180 packets/sec
Load-Interval #2: 5 minute (300 seconds)
    input rate 25.50 Mbps, 9.49 Kpps; output rate 159.20 Kbps, 142 pps
RX
    119855915845 unicast packets 6017690609 multicast packets 20318382 broadca
st packets
    125893924837 input packets 124351081100162 bytes
    70763564145 jumbo packets 0 storm suppression packets
    0 runts 0 giants 1 CRC 0 no buffer
    1 input error 0 short frame 0 overrun   0 underrun 0 ignored
    0 watchdog 0 bad etype drop 0 bad proto drop 0 if down drop
    0 input with dribble 0 input discard
    0 Rx pause
TX
    20958491666 unicast packets 503446052 multicast packets 52796318 broadcast
packets
    21514734036 output packets 29748981423583 bytes
    18964491576 jumbo packets
    0 output errors 0 collision 0 deferred 0 late collision
    0 lost carrier 0 no carrier 0 babble 0 output discard
    0 Tx pause
3 interface resets

Connectivity issue between ABAP and JAVA stack

Hi All
we are facing the following issue while running interface. message got failed while processing Graphical mapping in Java stack. Can any one please help us what could be the issue here? Is there anything we missed from Config / XI development.
This message was failed with not more than 200 MB file.
XIServer
JCO_SYSTEM_FAILURE
connection to partner 'localhost:0' broken / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 t
"SYSTEM FAILURE" during JCo call. connection to partner 'localhost:0' broken / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 t
A
Appreciate your quick response.

Hi Yadagiri,
Please check the reply from Carlos in the below thread
Re: increasing heapsize of java on WINDOWS 2003
Also check your sm59 RFC destination, i guess there is some problem.
Delete AI_RUNTIME_JCOSERVER(RFC connection between the Java engine and the ABAP engine) and create it again.
Hope tht will resolve ur issue...
Regds,
Pinangshuk.

CoA issues between ISE and 3750x

Similar Messages

Maybe you are looking for